Related
OK, so I`ve installed this ROM and it was very easy to do. However, what am I supposed to "see" different? My "settings" screen looks the same and not the same as the screenshot in the forum (Overcome 10.1 Series v2.1.1). Also,I can confirm I`m on Overcome 10.1 Series v2.1.1 since the about device screen tells me. I`ve seen the changelog etc but don`t fully understand the differences to the standard Samsung ROM. Also, now it`s a custom ROM, will this allow me to charge via USB (from PC) or do I need to enable something to allow this? Sorry for the noobs question!! Ta
okeycokey said:
OK, so I`ve installed this ROM and it was very easy to do. However, what am I supposed to "see" different? My "settings" screen looks the same and not the same as the screenshot in the forum (Overcome 10.1 Series v2.1.1). Also,I can confirm I`m on Overcome 10.1 Series v2.1.1 since the about device screen tells me. I`ve seen the changelog etc but don`t fully understand the differences to the standard Samsung ROM. Also, now it`s a custom ROM, will this allow me to charge via USB (from PC) or do I need to enable something to allow this? Sorry for the noobs question!! Ta
Click to expand...
Click to collapse
Since Overcome doesn't have any extra themes or anything, you won't "see" anything different. You probably noticed that some of the applications you had are now gone (the ones installed by your carrier etc.) and that you now have root access (superuser application). It also has an extended power menu, allowing you to reboot to recovery and download mode directly.
There are also some other changes that you can't see, like the ROM being zipaligned and deodexed - those changes cannot be "seen", but they should make the ROM run smoother. Also, if you updated from stock 3.1 or something, you're now on android 3.2.
As this ROM has a stock kernel, it will not allow you to charge via USB, for that you will need pershoots kernel (look in the development part of the forums or click the link in my sig ). After you flash the kernel, you'll also need to enable USB charging. Again, search is your friend here, I think there is even a sticky that has all the info needed.
Thanks for the reply.Excellent!
No problem, if you have any other questions I'm sure someone will have the answer .
Oh and feel free to click the "thanks" button ;-)
okeycokey said:
OK, so I`ve installed this ROM and it was very easy to do. However, what am I supposed to "see" different? My "settings" screen looks the same and not the same as the screenshot in the forum (Overcome 10.1 Series v2.1.1). Also,I can confirm I`m on Overcome 10.1 Series v2.1.1 since the about device screen tells me. I`ve seen the changelog etc but don`t fully understand the differences to the standard Samsung ROM. Also, now it`s a custom ROM, will this allow me to charge via USB (from PC) or do I need to enable something to allow this? Sorry for the noobs question!! Ta
Click to expand...
Click to collapse
i too have overcome v2.1.1, usb charging is working fine but it will be slow (it was same when i had stock rom without rooting) dont know i see in some thread people raising this issue.
nightmarebadger said:
Since Overcome doesn't have any extra themes or anything, you won't "see" anything different. You probably noticed that some of the applications you had are now gone (the ones installed by your carrier etc.) and that you now have root access (superuser application). It also has an extended power menu, allowing you to reboot to recovery and download mode directly.
There are also some other changes that you can't see, like the ROM being zipaligned and deodexed - those changes cannot be "seen", but they should make the ROM run smoother. Also, if you updated from stock 3.1 or something, you're now on android 3.2.
As this ROM has a stock kernel, it will not allow you to charge via USB, for that you will need pershoots kernel (look in the development part of the forums or click the link in my sig ). After you flash the kernel, you'll also need to enable USB charging. Again, search is your friend here, I think there is even a sticky that has all the info needed.
Click to expand...
Click to collapse
This helps. Been searching for solutions for enable USB charging on Overcome ROM. Was not dare to simply flash Pershoot kernel but sounds working great on u so will do try it. Thanks!!
Q&A for [USB OTG] [11DEC13] [PATCH] Externally Powered USB OTG
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [USB OTG] [11DEC13] [PATCH] Externally Powered USB OTG. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Paranoid Android 4.4
Hello!
first of all, thanks for your work. :good:
I would like to try the patch but I don't know which version to choose: I have a Paranoid Android 4.4
Could you help me?
Wifi Crash, Media Crash, Settings "Storage" Crash
Hey guys, I'm on PA 4.6 BETA5, when I flash the aosp or franko kernel (after going back to stock kernel before flashing the new one) my Wifi won't enable, android.something.media crashes and in the settings app, when I tap storage the app crashes...any way to solve this problem or an alternative? Thanks!
PS: I'm really sorry if this was asked before, I read the hole last 10 sites of the forum and didnt found anythings related to my problem, "just" 10 sites because I think its related to 4.4.4 and maybe PA.
Which OTG mod to download for stock 4.4.4?
Which OTG mod to download for stock 4.4.4? There are so many I can not figure out what is the correct one to use.
OTG Android Lollipop
Anything to Android 5.0? I have looking and I think that it isn't incorporate in the stock kernel
thanks
piedra96 said:
Anything to Android 5.0? I have looking and I think that it isn't incorporate in the stock kernel
thanks
---------- Post added at 11:38 AM ---------- Previous post was at 11:34 AM ----------
I have looking and I think that it isn't incorporate in the stock kernel. So, anything to Android 5.0?
thanks
Click to expand...
Click to collapse
There are custom kernels (unleased kernel series, Hells Doctor, Hellscore, ...) which supports OTG and also supports Lolipop.
Stock Lollipop
A zip file where i can make a modification to my stock kernel on the N4! I want to use the stock for a few days to test it!
pm_dsp_ra said:
There are custom kernels (unleased kernel series, Hells Doctor, Hellscore, ...) which supports OTG and also supports Lolipop.
Click to expand...
Click to collapse
mm okey! so, have you test Hells Doctor on Lollipop? I will try out it this afternoon. I'm running a 4.3 stock perfectly with the otg, but Lollipop look like so excited.
Lollipop
Is there a patch for android lollipop for OTG support? I have franco.Kernel installed.
Lollipop
Is there a patch for Lollipop? Or does the kitkat patch work on lollipop?
dangerelvis said:
Is there a patch for Lollipop? Or does the kitkat patch work on lollipop?
Click to expand...
Click to collapse
I have no idea! I have tested Hells Doctor and Hell Core kernels on my Nexus 4 running Stock Lollipop and anyone work. :crying: :crying:
Anyone tried this patch on stock Lollipop kernel? Does it work?
How does one "Simply install the zip in recovery"?
My screen is broken (just the touch; everything is still visible). I was hoping I could install this mod without being able to touch the lower half of my screen so that I could plug in a mouse so that I could copy some files off my device.
I can reboot into recovery mode, but USB debugging is *not* enabled. I've never used "adb" on this device before (I just says "offline" when I try to run it from my PC).
I have no idea how to "install a zip".
Phone is an Nexus 4, running android 4.something.
OTG on Paranoid 4.6 beta 6
Hello,
When I flash the kernel (R199) and the system load I can't turn on the wifi and every time I enter the storege settings they crash.
also tried the other versions of the kernel, no help.
please help.
Thanks,
Is the OP willing to develop the patch for lollipop too? Or is there any nice kernel with USB host support?
nexus 4 lolipop 5.0.1 and xbox wireless gamepad
Hello. I want use xbox360 wireless gamepad on my nexus 4 lolipop 5.0.1. I think first I need kernel with OTG support. What kernel I can download on 5.0.1 android? I need y-cable for receiver of xbox360. what about mouses and keyboards they also need y-cable?
What can be the problem, why OTG still doesn't work
Hey guys,
however I'm completely new to this stuff, I managed to get through every barriers, and I put Cyanogenmod 11 snapshot M12 on my Nexus 4 and after that flashed the suggested kernel and patch successfully to try out OTG. The phone works withput problem, the installations seem to be successful, therefore I tried to connect an external storage to the phone to check if OTG works on it.
For that, I used a SIMPLE OTG cable like this:
<<<LINK CANNOT BE SHOWN SINCE I AM NEW TO THE FORUM - picture is the second picture of the first post in this thread>>>
connected to an Y-cable SIMILAR to this:
<<<NO LINK AGAIN - the 3rd picture of the first post in this thread>>>
The difference from the one on the picture is that mine has a male mini USB end instead of a female normal USB end as in the picture. My cable is the cable of an external wichester otherwise.
So, I tried with this cable setup, the result was that both the phone and the connected storage received electricity from the external power source, but the storage was not detected by the phone. I had a feeling that it doesn't get enogh power, so I attached it to a USB phone charger just to be sure, but the situation remained the same: the light on the storage was green, which means it is charging, the light on the phone was also on, but the storage was not detected.
My question is if I should try with the exact same cable set that can be found in the first post of this thread on the first picture or mine also should do the job, and there should be still some software related problem?
Please also tell me if you need more information on this to answer it, however I tried to be specific.
Thank you for your help in advance.
Hello. What i can do on lolipop? There is no solution? I have a 32gb flash drive, y-otg cable, standart power adapter micro-usb-male. Rooted nexus4
Which zip I need to download?
Hi, i'm really beggining on Android stuffs, since I didnt had one until the last week, so I'm really in doubt about which one of the zip files i need to install in my system to make the OTG cable work properly.
Once I downloaded a random ziddley zip on the internet and when I installed it in recovery mode, i needed to reinstall the android system on my phone, since the phone wont boot anymore.
So, can anyone help me? I'm sharing in this post a screenshot of the Android Version screen on the settings. I've rooted my phone using the King Root app
Considering that my android version is 4.4.4, I consider that I may download one of the following:
4.4.x: 2013.12.11 1604ET: [fk r199] [fk r199-CM]
4.4.x: 2013.12.06 1445ET: [aosp r7]
But which one?
And just another noob question. Is this the right way to install the ziddley zip on my phone?
(www).addictivetips.com/mobile/how-to-install-a-rom-or-app-from-zip-file-to-android-device-from-recovery/
Sorry for the noob questions and thanks to anyone who helps, because I REALLY need the otg cable to work, so I can develop some things using the XBOX 360 cable!
Removed
Well you all would have already know that-↓
Lineage 15 is released for our Z2 Plus and is also available for download
I tried to install that rom
But I was getting error 7 and then error 6 !!
But Somehow I managed to get rid from it installed the rom successfully as well as gapps but it's not booting up
:crying:
And yes I how did I manage to install it?
I was getting error 7 and error 6 then I opened the "update script" file into the rom and deleted all asserts coding and even then it did not work. So after trying for 2 to 3 times it installed easily but was not booting up.
Just want that if you guys can check it and somehow it boots up
Download link for Rom
https://yadi.sk/d/a-h59kHU3MThx6
Download link For Android 8.0 UNOFFICIAL GAPPS
http://www.lineageosroms.org/forums/topic/gapps-lineageos-15-android-oreo-roms/
For Source or Thread
http://www.lineageosroms.org/forums/topic/lineageos-15-zuk-z2-lenovo-z2-plus-android-oreo-8-0-rom/
I did not understand what you were doing
Nitink200 said:
Well you all would have already know that-↓
Lineage 15 is released for our Z2 Plus and is also available for download
[/SIZE]
I tried to install that rom
But I was getting error 7 and then error 6 !!
But Somehow I managed to get rid from it installed the rom successfully as well as gapps but it's not booting up
:crying:
Just want that if you guys can check it and somehow it boots up
You can find Source in LINEAGE ROMS WEBSITE
Click to expand...
Click to collapse
How did you finally manage to install the rom? Did you succeed? You did not write clearly. And where are the files located?
Wait for Oreo releases of the XDA Devs here instead of flashing untrusted stuff from the internet.
Z2 Plus is not officially supported by Lineage OS for now, so possibility of getting early builds is kind of unlikely, so please verify the source of the download once and refrain from flashing anything thats not released by our devs for now
I am new to XDA and That's why I was not permitted to add any external link to the rom (files) itself.
If I still can add external link so please tell me how to do it
And yes I how did I manage to install it?
I was getting error 7 and error 6 then I opened the "update script" file into the rom and deleted all asserts coding and then it did not work. So after trying for 2 to 3 times it installed easily but was not booting up.
Here's the link to download rom ↓↓
https://yadi.sk/d/a-h59kHU3MThx6
(This download link can also be located in thread itself)
And for thread in LINEAGE OS visit the link below↓↓
http://www.lineageosroms.org/forums/topic/lineageos-15-zuk-z2-lenovo-z2-plus-android-oreo-8-0-rom/
DISCLAIMER:
THIS IS AN INITIAL BUILD WHICH MAY NOT BOOT AT ALL. EVEN IF IT BOOTS, IT MAY HAVE MANY MORE BUGS THAN YOU CAN IMAGINE. HAVE A BACKUP BEFORE FLASHING THIS AND TRY AT YOUR OWN RISK.
Click to expand...
Click to collapse
Do you even read at all?
I have read it all and That's why posted a question here so that you guys can somehow make it bootable because I am too excited and Oreo is ported without boot related bugs even for the older device like Moto x 1st Gen then why not for our device?
Nitink200 said:
I have read it all and That's why posted a question here so that you guys can somehow make it bootable because I am too excited and Oreo is ported without boot related bugs even for the older device like Moto x 1st Gen then why not for our device?
Click to expand...
Click to collapse
calm yourself and just gently show patience.
the devs here on XDA are working on Oreo, check the Offical AEX thread, Davide stated that the next build is going to be Oreo.
I wouldn't flash any ROM without having the ability to see the source code atleast. The site you found the ROM at does not look legitime to me at all.
Who knows what it will do/did to your device.
I mean if you dont care..
calm yourself and just gently show patience.
the devs here on XDA are working on Oreo, check the Offical AEX thread, Davide stated that the next build is going to be Oreo.
I wouldn't flash any ROM without having the ability to see the source code atleast. The site you found the ROM at does not look legitime to me at all.
Who knows what it will do/did to your device.
I mean if you dont care..
Click to expand...
Click to collapse
Thanks
calm yourself and just gently show patience.
the devs here on XDA are working on Oreo, check the Offical AEX thread, Davide stated that the next build is going to be Oreo.
I wouldn't flash any ROM without having the ability to see the source code atleast. The site you found the ROM at does not look legitime to me at all.
Who knows what it will do/did to your device.
I mean if you dont care..
Click to expand...
Click to collapse
Thanks
a user sent me a PM with a link to a Russian forum that may contain roms for both T560 and T561.
I can see links for CM 11 to 13 and Lineage 14 but I am not sure if these are actual roms, fix or bug reports.
So anyone here speak Russian?
link here: MOD Edit :- Links Removed
Let's discuss here
Was able to download the firmware for CM 13 (MM 6.0.1) and Lineage 14 but haven't flashed them yet since the link for boot.img for the roms is dead. hmmm
Lineage 14: MOD Edit :- Links Removed
CM 13: MOD Edit :- Links Removed
I tried cm12.1, 13, 14.1 in my sm-t560.
Cm12.1 it works but then it restarts
CM 13 no bugs
lineage 14.1 no works
JanValentine said:
I tried cm12.1, 13, 14.1 in my sm-t560.
Cm12.1 it works but then it restarts
CM 13 no bugs
lineage 14.1 no works
Click to expand...
Click to collapse
Hi so CM 13 is ok from the following links? Did you need to flash the boot.img?
I read you said no bugs but to be sure, does the USB OTG work on the CM 13 still?
Can you lay down what you did exactly. Thanks buddy!
cmlosaria said:
Hi so CM 13 is ok from the following links? Did you need to flash the boot.img?
I read you said no bugs but to be sure, does the USB OTG work on the CM 13 still?
Can you lay down what you did exactly. Thanks buddy!
Click to expand...
Click to collapse
Do not install the boot.img.
OTG works.
Thanks buddy
Will just do a backup and flash this. We can talk about features here as well so others will know. I have a T561
Are you using TWRP 3.0 on your T560? It's a requirement for flashing lineage 14.
However, I'm using T561 and I can't find a compatible TWRP version 3.0 for my device.
Will try to flash CM 13 now. Will update.
cmlosaria said:
Are you using TWRP 3.0 on your T560? It's a requirement for flashing lineage 14.
However, I'm using T561 and I can't find a compatible TWRP version 3.0 for my device.
Will try to flash CM 13 now. Will update.
Click to expand...
Click to collapse
3.0.2-0, the one that is published here.
Yes I saw T560 has a TWRP version 3. However T561 doesn't have it and the one on the Russian forum seems pouting to a dead link. Will try to contact the author. He was the one who sent me a PM.
Anyway, so CM 13 worked for me. Still testing but I find the animations a little sluggish. Not sure but in the early days of Android ROM flashing it was advised to let a new rom settle for a couple of hours, even days. I will be patient with this. It's a fresh sight over TouchWiz.
Anyway quite happy I found a working rom after months of searching (CM 13).
All essentials are working so far.
Wifi
USB OTG
Camera
Sim (t561)
USB MTP seems broken. My laptop can detect it and shows as removable storage but it doesn't show on the windows explorer. Not sure what's going on. Anyway not a biggie I can use the OTG to transfer files.
Attaching some pictures here.
Will update on performance.
cmlosaria said:
Yes I saw T560 has a TWRP version 3. However T561 doesn't have it and the one on the Russian forum seems pouting to a dead link. Will try to contact the author. He was the one who sent me a PM.
Anyway, so CM 13 worked for me. Still testing but I find the animations a little sluggish. Not sure but in the early days of Android ROM flashing it was advised to let a new rom settle for a couple of hours, even days. I will be patient with this. It's a fresh sight over TouchWiz.
Anyway quite happy I found a working rom after months of searching (CM 13).
All essentials are working so far.
Wifi
USB OTG
Camera
Sim (t561)
USB MTP seems broken. My laptop can detect it and shows as removable storage but it doesn't show on the windows explorer. Not sure what's going on. Anyway not a biggie I can use the OTG to transfer files.
Attaching some pictures here.
Will update on performance.
Click to expand...
Click to collapse
Do you have the img of 14.1?
Nope non, haven't tried flashing lineage 14 since it says it requires TWRP 3.0 which I don't have.
How do you find CM 13 so far? Wonder if the lineage 14 OS is much faster. Haven't heard from the creator yet. He did mention he isn't as active here.
One thing I noticed is the CM 13 (marshmallow) does not support moving of app from internal to partitioned SDcard via App2SD or Link2SD.
Not sure if it's a Marshmallow thing (adoptable storage) or a rom thing.
Thoughts?
Edit:
Moving2SD isn't supported but linking to SD is.
cmlosaria said:
Are you using TWRP 3.0 on your T560? It's a requirement for flashing lineage 14.
However, I'm using T561 and I can't find a compatible TWRP version 3.0 for my device.
Will try to flash CM 13 now. Will update.
Click to expand...
Click to collapse
https://drive.google.com/file/d/1BdV8Qrn7Vl-8vB7LmYT1AB5DOy-Ry4Y3/view
All thanked for Ma3a_XaTa
Wow thank you for this. Yes he was the one who sent me a message. Do I need to flash this via Odin or flashing it via existing TWRP is ok? Have you tried Lineage 14?
EDIT:
Flashed the TWRP 3.0 via TWRP 2.8. Will update if Lineage 14 is ok.
EDIT:
The device boots up on Lineage 14 but I am always notified of the following warning.
"com.android.phone has stopped"
I am able to set up the tablet but that warning always pops up even after two install attempts.
Also, The SIM card isn't detected on this ROM, which is a no biggie but would help if anyone knows of a fix?
This is the error I am recieving. Hope there's a fix for this
Edit:
Edit:
Tried the following steps
Clear Cache and Data of the Phone App, SIM Toolkit, Reboot. The problem still persists.
Lineage 14 is so much faster then CM 13. We're so close already to having a useable Nougat ROM. Maybe it has something to do with that boot.img for lineage which can't be downloaded.
Found a temporary fix.
Activate developer options > USB Debugging. Then when the warning prompts again, there is now an option > hide till device restarts.
cmlosaria said:
Wow thank you for this. Yes he was the one who sent me a message. Do I need to flash this via Odin or flashing it via existing TWRP is ok? Have you tried Lineage 14?
EDIT:
Flashed the TWRP 3.0 via TWRP 2.8. Will update if Lineage 14 is ok.
EDIT:
The device boots up on Lineage 14 but I am always notified of the following warning.
"com.android.phone has stopped"
I am able to set up the tablet but that warning always pops up even after two install attempts.
Also, The SIM card isn't detected on this ROM, which is a no biggie but would help if anyone knows of a fix?
Click to expand...
Click to collapse
If you want to do a good job, you and the experienced people can find solutions to some problems in this rom
I wrote a guide on how to install this Nougat based ROM in my website, along with initial review and fix to the pesky notifications.
I hope this is allowed, otherwise please delete but don't ban me mods please!
Link: MOD Edit:- Links Removed
Credits goes to Ma3a_XaTa, Mahareg, Ashky, LineageOS team and the XDA Community.
cmlosaria said:
I wrote a guide on how to install this Nougat based ROM in my website, along with initial review and fix to the pesky notifications.
I hope this is allowed, otherwise please delete but don't ban me mods please!
Link: MOD Edit:- Links Removed
Credits goes to Ma3a_XaTa, Mahareg, Ashky, LineageOS team and the XDA Community.
Click to expand...
Click to collapse
Good work many thanks for you and we wating fixes thank you
So far so good using this tablet on Lineage 14. I am using a very good launcher called Sentio Launcher. Allows me to work on the tablet like a laptop. I have a Bluetooth keyboard.
This is good as a daily driver. Wish the SIM function can be fixed but I don't mind really :3
sm-t560 does not work (7.1.2), do not pass the boot.img?
Hi, as the title says I have a Samsung Galaxy Tab 4(SM-T530) with Android 5.0.2 and I wonder if it is possible to have a newer Android version installed on it? Or maybe a custom rom?
I have done some searching but I can't find the required info.
Thanks for any help.
I did search but cannot find anything...help is appreciated.
Nobody who knows?
There are none which are terribly up-to-date, but I'm using https://forum.xda-developers.com/tab-4/development/rom-resurrection-remix-5-8-0-t3544283 and there's also https://www.cyanogenmods.org/forums/topic/lineage-os-14-1-galaxy-tab-4-10-1-wifi-android-7-1-rom/ .
sandalle said:
There are none which are terribly up-to-date, but I'm using https://forum.xda-developers.com/tab-4/development/rom-resurrection-remix-5-8-0-t3544283 and there's also https://www.cyanogenmods.org/forums/topic/lineage-os-14-1-galaxy-tab-4-10-1-wifi-android-7-1-rom/ .
Click to expand...
Click to collapse
Try this rom witch I made witch has working camera & microphone but no Skype yet, no bloat, very little lag, and come with gapps, Open Camera, Pixel Launcher, Pixel Icons fot scock LineageOS apps https://forum.xda-developers.com/ta...ht-project-t3877643/post78389814#post78389814
Another Newbie with questions
DJABHipHop said:
Try this rom witch I made witch has working camera & microphone but no Skype yet, no bloat, very little lag, and come with gapps, Open Camera, Pixel Launcher, Pixel Icons fot scock LineageOS apps https://forum.xda-developers.com/ta...ht-project-t3877643/post78389814#post78389814
Click to expand...
Click to collapse
Hi DJABHipHop,
Thanks for all the work you've done.
I have a Sumsung SM-T530 (matissewifixx)
OS: Lollipop 5.0.2
Bootloader: T530XXU1BQB2
After a quick learning curve I've been following the https://www.getdroidtips.com/lineage-os-17-1-galaxy-tab-4-10-1#Pre-Requirements article:
1) Used Odin3-v3.10.6.exe to root my device
2) Installed the latest TWRP 3.0.0-0-.matisse.img <-- It appears you're using a newer version (TWRP-3.2.3-0_matissewifi-180918.img) - question to follow
3) Attempted (unsuccessfully) to install the lightning-17.1-20201012-UNOFFICIAL-matissewifi-Unsweetened-XDA-BUILD
I receive an Error 7 - basically not identifying my device correctly from what the error says
Now the article actually mentions this exact issue...
To install Lineage OS 17.1 on your Samsung Galaxy Tab 4 10.1, you need to unlock bootloader and running the latest TWRP Recovery. If you are on the old version, you will see error 7 warning text while installing the custom ROM on Galaxy Tab 4 10.1 (matisse) device.
Click to expand...
Click to collapse
Because I'm new to this whole process, I want to be sure I am doing the right thing (don't want to brick the device)
Do I need to use the TWRP version you reference in https://forum.xda-developers.com/tab-4/development/samsung-galaxy-tab-4-light-project-t3877643/post78389814#post78389814?
srekcuSuoY said:
Hi DJABHipHop,
Thanks for all the work you've done.
I have a Sumsung SM-T530 (matissewifixx)
OS: Lollipop 5.0.2
Bootloader: T530XXU1BQB2
After a quick learning curve I've been following the https://www.getdroidtips.com/lineage-os-17-1-galaxy-tab-4-10-1#Pre-Requirements article:
1) Used Odin3-v3.10.6.exe to root my device
2) Installed the latest TWRP 3.0.0-0-.matisse.img <-- It appears you're using a newer version (TWRP-3.2.3-0_matissewifi-180918.img) - question to follow
3) Attempted (unsuccessfully) to install the lightning-17.1-20201012-UNOFFICIAL-matissewifi-Unsweetened-XDA-BUILD
I receive an Error 7 - basically not identifying my device correctly from what the error says
Now the article actually mentions this exact issue...
Because I'm new to this whole process, I want to be sure I am doing the right thing (don't want to brick the device)
Do I need to use the TWRP version you reference in https://forum.xda-developers.com/tab-4/development/samsung-galaxy-tab-4-light-project-t3877643/post78389814#post78389814?
Click to expand...
Click to collapse
3.0.0-0 isn't the latest TWRP. Check https://forum.xda-developers.com/tab-4/development/recovery-twrp-recovery-matisse-millet-t4019831 and install matisse version. Then, you can install lfr 17.1 or los 16.
And to get more precise informations, check always XDA, not external bad blogs...
matteo0026 said:
3.0.0-0 isn't the latest TWRP. Check https://forum.xda-developers.com/tab-4/development/recovery-twrp-recovery-matisse-millet-t4019831 and install matisse version. Then, you can install lfr 17.1 or los 16.
And to get more precise informations, check always XDA, not external bad blogs...
Click to expand...
Click to collapse
Thanks matteo,
Your tip/link has worked I've now upgraded to twrp-3.4.0-3-matisse and the 17.1 OS install has now been successful.
Good advice on the 'external' blogs... my next step is to install the 'GApps', that 'external' blog suggested some more external links to get the right Apps, more confusing for a newbie that the original article...
any advice would be greatly appreciated.
srekcuSuoY said:
Thanks matteo,
Your tip/link has worked I've now upgraded to twrp-3.4.0-3-matisse and the 17.1 OS install has now been successful.
Good advice on the 'external' blogs... my next step is to install the 'GApps', that 'external' blog suggested some more external links to get the right Apps, more confusing for a newbie that the original article...
any advice would be greatly appreciated.
Click to expand...
Click to collapse
opengapps.org --> arm 10 pico // and you are good to go
looking for a rom with android 9
is it possible or not?
found nothing
Medical Detective said:
looking for a rom with android 9
is it possible or not?
found nothing
Click to expand...
Click to collapse
If you aren't able to search on XDA... https://forum.xda-developers.com/t/rom-unofficial-matisse-millet-lineageos-16-0.4032901/