Database Users

Stock ROMs Factory v6.1 , v8.3 , v8.4 , v8.5 , v8.7, V9.0, V9.2-patch : v21

CAUTION TO NOT LOOSE TWRP
I read two posts that say v21, now again on V8.5, put the stock recovery back instead of twrp. This is probably a side effect of a fresh stock /system and wipe of /data.
As a preventive step, when done flashing and wiping reboot to recovery FIRST, before booting the system It will allow recovery to handle removing the recovery-from-boot.p that flashes stock recovery.
I just patched the modified V7.4.2 up to the newly released 8.3 now 8.4. 8.5, 8.7,9.0 -V9.2 Patch
New update has been made from V17 to V21 of the non prime version of R1-HD, Non prime is behind on security patch (2017-05-05)
Copied ROM from phone and made twrp install ROM from it.
* No preloader change (official updates change the preloader to block your ability to use sp flash tools for rom flashing)
* No lk.bin change __ this part is what allows you to choose boot options(boot menu when power and volume pressed together)
* No "FOTA" app Fota has now been left in to make it easier to get next update, if that ever happens.
* No opera browser
* No adds (removed in the modified 7.4.2)
* Custom boot logo (only done on v8.3, there was no interest in this so abandoned)
--Newer versions of rom left stock, Leaving mods up to user.
** while it is not necessary to do a wipe with this ROM, I still recommend it.
**Thanks:
** @vampirefo needed his patched v7.4.2 in order to apply this new 8.3 patch and again for 8.4
** @ColtonDRG OR @jasonmerc I do not remember which one made it: For the image used in the custom logo
and the modified zip is here .
Roms are rootable with SuperSU, flashed in twrp after install. Must be done in systemless mode. In order to patch system veridy in boot.img
Logo update did not work on original rom changing link to updated version
BLU rolled v8.3 back to v7.4.2 because of app compatability issues. V8.4 is there fixed release. Both 8.3 and 8.4 are modified prime roms with ads stripped
V21 is the non prime update.
Unmodified V6.1
==>NON-ROOTED-logo-not-replaced-modified-V8.3
==>Fixed Logo modified NON_ROOTED V8.3
==>>modified V8.4
==>>modified V8.5
==>>Full with Ads V8.7
==>>Full with Ads V9.0
==>>Patch For V9.2 must be flashed on top of fresh V9.0
****Run debloat ==>script to remove ads if you need/ want to, or remove from zip before flashing ****
alt. manual example: before reboot, while still in twrp. Select mount and put checkmark next to system. Then run these two commands in adb terminal
Code:
adb shell rm /system/priv-app/com.amazon.*/com.amazon.*.apk
adb shell rm /system/app/Adups*/*.apk
==>>Modified V21
** stand alone logo installs

I flashed this but I didn't get the custom boot logo.

mendelgordon said:
I flashed this but I didn't get the custom boot logo.
Click to expand...
Click to collapse
I had that happen to my second phone too.
I don't have an explanation yet.
I even made a separate update.zip , that one didn't make the logo change either. I did eventually change it with sp flash tool.
I tried with both recoveries.
and multiple /dev location formats. and for whatever reason my one phone did not accept the logo change from recovery.
And the other test phone it worked.

mendelgordon said:
I flashed this but I didn't get the custom boot logo.
Click to expand...
Click to collapse
Neither did I but it all seems to be working fine

Been using this for about a day now, likewise no custom boot logo, but that's fine. Otherwise, it's been running super well. A lot better than the previous mostly stock version did for me with the bloatware APKs removed after the install. A lot of the general idiosyncrasies of the previous version of the stock rom seem to have gone away for me. It seemed to have weird storage management issues, errors moving to SD, broken symlinks that prevent apps from moving or being reinstalled, and a lot of other little non-storage issues, but so far, none off that here.
Long story short, good work! I hope we eventually see proper 7.x roms through some of the efforts going on, but in the meanwhile, your work here has made life a little bit better on 6.

It seems that I was able to get the logo.bin to update when I applied the original update patch, but not when I used the same line in the rom install.
It is no big deal that it did not work, I was just trying to make it look different at boot time.
edit:
I think i found the problem with the logo not updating.
i used the update-binary from the official patch update. (the one that allowed the logo to change the first time)
and it changes . so since the ROM seems to install the way it is , only the logo didn't flash I put it in a separate update.zip if anyone is interested in it.
EDIT 2:
clarification.
It was not so much the binary allowing the logo to change but the format of the partition location I had been using that needed that binary.
Further test had shown me that I could have used the binary I was using but just change the partition naming line
Code:
package_extract_file("logo.bin", "/dev/block/mmcblk0p9")
the above code works with the same update-binary as rom install
But I was using
Code:
package_extract_file("logo.bin", "/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/logo")
Taken straight from the official patch, and thats why it needed the update-binary also.
I dont know what is different in the binary other than , major size difference.
The powered by me logo was just a test file to see changes in the logo.
**logo-update is same as composite but with alt updater-binary
**composite-logo screenshot is in op
**stock logo will return to original BLU logo

mrmazak said:
It seems that I was able to get the logo.bin to update when I applied the original update patch, but not when I used the same line in the rom install.
It is no big deal that it did not work, I was just trying to make it look different at boot time.
edit:
I think i found the problem with the logo not updating.
i used the update-binary from the official patch update. (the one that allowed the logo to change the first time)
and it changes . so since the ROM seems to install the way it is , only the logo didn't flash I put it in a separate update.zip if anyone is interested in it.
EDIT 2:
clarification.
It was not so much the binary allowing the logo to change but the format of the partition location I had been using that needed that binary.
Further test had shown me that I could have used the binary I was using but just change the partition naming line
Code:
package_extract_file("logo.bin", "/dev/block/mmcblk0p9")
the above code works with the same update-binary as rom install
But I was using
Code:
package_extract_file("logo.bin", "/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/logo")
Taken straight from the official patch, and thats why it needed the update-binary also.
I dont know what is different in the binary other than , major size difference.
The powered by me logo was just a test file to see changes in the logo.
Click to expand...
Click to collapse
Hahaha the scribbled "ME" is hilarious. Your work is awesome, I don't think anyone using this rom will have an issue with the boot image but thanks for being so helpful and explaining.
P. S. Do you have any plans with the Nougat update?

Serenitybs said:
Hahaha the scribbled "ME" is hilarious. Your work is awesome, I don't think anyone using this rom will have an issue with the boot image but thanks for being so helpful and explaining.
P. S. Do you have any plans with the Nougat update?
Click to expand...
Click to collapse
Nougat is going to take a full build from scratch. We don't have 100% identical hardware with any other nougat device to my knowledge. We might have the same MTK chipset, but there are several other differences. All we really need is an official device overlay and the vendor files released by BLU themselves. We can then apply those to the latest Lineage or AOSP (I prefer AOSP myself) and build. Then the only problem we'll run into is anything that has changed in 7.x that isn't compatible with our kernel we use in 6.0. It'd be a slight chance our current kernel would work without some patches on 7.x We can't even get our official sources for anything else, so I'm almost certain we'll not find any patches to for the kernel to work properly with Nougat, at least not from BLU or any similar devices. None The less Nougat has been well thought of, and we have been trying to debug issues with a broken Port. But a broken port from a different device is just that - Broken. We need a team of knowledgeable devs to build Nougat + Kernel from scratch and then we'll have it working. I can't do it alone with the old computer I have, the R1HD would be long forgot of by the time I got Android Compiled haha.
Mr. Mazak I flashed your rom it went smooth, I was hoping the newest update was for 6.0.1. But I didn't lose any functionality, hopefully on my Cricket Service this update has patched some things to the radio device that will retain connection more steadily. I experienced a lot of coming and going with the 7.4.2 rom. None The Less you did a good job with this update Mr. My suggestion is find the same MTK chipset with a fully working 7.x rom and just port the /System but keep all our libs and inits from this release just for a test starter. And don't replace the camera app thats in AOSP 7.x. )

linuxsociety said:
Nougat is going to take a full build from scratch. We don't have 100% identical hardware with any other nougat device to my knowledge. We might have the same MTK chipset, but there are several other differences. All we really need is an official device overlay and the vendor files released by BLU themselves. We can then apply those to the latest Lineage or AOSP (I prefer AOSP myself) and build. Then the only problem we'll run into is anything that has changed in 7.x that isn't compatible with our kernel we use in 6.0. It'd be a slight chance our current kernel would work without some patches on 7.x We can't even get our official sources for anything else, so I'm almost certain we'll not find any patches to for the kernel to work properly with Nougat, at least not from BLU or any similar devices. None The less Nougat has been well thought of, and we have been trying to debug issues with a broken Port. But a broken port from a different device is just that - Broken. We need a team of knowledgeable devs to build Nougat + Kernel from scratch and then we'll have it working. I can't do it alone with the old computer I have, the R1HD would be long forgot of by the time I got Android Compiled haha.
Mr. Mazak I flashed your rom it went smooth, I was hoping the newest update was for 6.0.1. But I didn't lose any functionality, hopefully on my Cricket Service this update has patched some things to the radio device that will retain connection more steadily. I experienced a lot of coming and going with the 7.4.2 rom. None The Less you did a good job with this update Mr. My suggestion is find the same MTK chipset with a fully working 7.x rom and just port the /System but keep all our libs and inits from this release just for a test starter. And don't replace the camera app thats in AOSP 7.x. )
Click to expand...
Click to collapse
Somebody already tried this out

linuxsociety said:
Nougat is going to take a full build from scratch. We don't have 100% identical hardware with any other nougat device to my knowledge. We might have the same MTK chipset, but there are several other differences. All we really need is an official device overlay and the vendor files released by BLU themselves. We can then apply those to the latest Lineage or AOSP (I prefer AOSP myself) and build. Then the only problem we'll run into is anything that has changed in 7.x that isn't compatible with our kernel we use in 6.0. It'd be a slight chance our current kernel would work without some patches on 7.x We can't even get our official sources for anything else, so I'm almost certain we'll not find any patches to for the kernel to work properly with Nougat, at least not from BLU or any similar devices. None The less Nougat has been well thought of, and we have been trying to debug issues with a broken Port. But a broken port from a different device is just that - Broken. We need a team of knowledgeable devs to build Nougat + Kernel from scratch and then we'll have it working. I can't do it alone with the old computer I have, the R1HD would be long forgot of by the time I got Android Compiled haha.
Mr. Mazak I flashed your rom it went smooth, I was hoping the newest update was for 6.0.1. But I didn't lose any functionality, hopefully on my Cricket Service this update has patched some things to the radio device that will retain connection more steadily. I experienced a lot of coming and going with the 7.4.2 rom. None The Less you did a good job with this update Mr. My suggestion is find the same MTK chipset with a fully working 7.x rom and just port the /System but keep all our libs and inits from this release just for a test starter. And don't replace the camera app thats in AOSP 7.x. )
Click to expand...
Click to collapse
It was just wishful thinking. I have no idea how all of this is done. All I know is @mrmazak has helped me to fall in love with my phone again with this V8.3. The 7.4.2 did seem a bit buggy for my phone but this update works beautifully and I didn't even root it. If this remains true I will be happy with this phone for awhile even on 6.0

Really confused right now.
I was browsing through the settings menus. And found in the Settings-security- menu a toggle labeled "quick boot" ( not to be confused with "fastboot") . I enabled it then rebooted to see if it booted quicker. Didn't seem to make much if any difference. So I went back to turn it back off. And it wasn't there. I checked in my other phone , it wasn't there on that one either.
Did any body see this menu item, and if so where is is it?
Edit 1:
Few more power off , power on cycles to compare times. With other phone and defiantly seems to have turned on some faster boot option.
This phone goes from off to on in 5-6 seconds other phone takes about 20.
Edit 2:
OK , I panicked for a minute.
Couldn't find the setting and thought that it was another way to block sp flash tool by preventing you from ever being fully powered off.
But the setting was in accessibility not security.

Mrmazak, first of all, thanks for the ROM, installed it yesterday. But I have a problem with SELinuxModeChanger app. First, I'm getting a security warning when installing it, then - when running it. And another message, with this app running - "can't obtain root", although SuperSU shows its status with green #, like every other app it gives root privileges to. On my other Prime phone, running 6.1 out of the box stock ROM, FM radio works just fine with SELinuxModeChanger app behaving flawlessly (no security warnings whatsoever). Any ideas?

detroitredwings said:
Mrmazak, first of all, thanks for the ROM, installed it yesterday. But I have a problem with SELinuxModeChanger app. First, I'm getting a security warning when installing it, then - when running it. And another message, with this app running - "can't obtain root", although SuperSU shows its status with green #, like every other app it gives root privileges to. On my other Prime phone, running 6.1 out of the box stock ROM, FM radio works just fine with SELinuxModeChanger app behaving flawlessly (no security warnings whatsoever). Any ideas?
Click to expand...
Click to collapse
The mode changer app is technically a security issue. I did have that warning a few times when using mode changer app from the XDA thread of the developer, then when I used the app downloaded from f-droid it worked with systemless root and didn't give the security warning.

The app downloaded from f-droid worked for me as well, many thanks!

Big thanks for getting this out, updated from previous debloated, rooted version to this modified 8.3 stock rom, rooted with SU v2.79 SR3, all is good - only App that won't show up nor install, even tried the ones off APK Mirror site - is my Dunkin Donuts App, LOL. Play Store now said it's not compatible and the APK started to install then failed - any ideas or suggestions on what to do ??
Otherwise, it's all good - I will survive without DD App, just run that from another device when I need my caffeine fix.

Letitride said:
Big thanks for getting this out, updated from previous debloated, rooted version to this modified 8.3 stock rom, rooted with SU v2.79 SR3, all is good - only App that won't show up nor install, even tried the ones off APK Mirror site - is my Dunkin Donuts App, LOL. Play Store now said it's not compatible and the APK started to install then failed - any ideas or suggestions on what to do ??
Otherwise, it's all good - I will survive without DD App, just run that from another device when I need my caffeine fix.
Click to expand...
Click to collapse
I also had an app that previously work, say is not compatible now.
Maybe has to do with apps that have links to pay accounts. And that has something to do with trustzone. (Tee1 & tee2)
Those sections I left out of the update. I will add it back in and test. Update when I do. It is also possible this problem is why Blu rolled back there update.
**EDIT**
well that didn't go well at all.
I flashed the new trustzone.bin files from the official update. Now phone no longer turns on and no longer connects to flash tool
**EDIT 2**
After much persistence and many failed attempts to get phone recognized in pc again. Finnaly got to a point that phone was cycling between "preloader" driver and "usb serial device", and with careful timing was able to start sp flash tool at just right time and the flashing back to original trustzone files seems to have recovered phone.
for the record i am not sure what steps made it work. But I was shifting back and forth between leaving phone sit on charge, then on charge with rubber band wrapped around power button, then not plugged in , and not plugged in with rubber band on power button.

Okay... persistence is key in customization, i guess! I am getting somewhere here!
mrmazak said:
The first link is needed to get phone unlocked so you can install twrp.
Click to expand...
Click to collapse
Finally got thru the steps in order (1-2-3-4) then Step (5) and sub-step 1. I can also boot to TWRP.
Now this brings me to this thread, 8.3 Stock ROM. The thread assumes one knows how to install it and I suspect this could be as easy as uploading it to a folder in the phone then booting to TWRP and INSTALLING the ZIP file? Could someone clarify the steps to install this 8.3 ROM?
Thanks!

OldSkewler said:
Okay... persistence is key in customization, i guess! I am getting somewhere here!
Finally got thru the steps in order (1-2-3-4) then Step (5) and sub-step 1. I can also boot to TWRP.
Now this brings me to this thread, 8.3 Stock ROM. The thread assumes one knows how to install it and I suspect this could be as easy as uploading it to a folder in the phone then booting to TWRP and INSTALLING the ZIP file? Could someone clarify the steps to install this 8.3 ROM?
Thanks!
Click to expand...
Click to collapse
Yes. You are correct
Either put the zip file on external sd card , put card into phone boot into recovery mode and install , or put file directly onto phone .
Many ways to do that.
Easiest is to copy to phone while phone is connected to PC.
Cam also download file from internet with your phone.
Bottom line is get zip file to the phone boot to recovery and install

Anyone else having wifi issues after upgrading? While watching videos it seems the internet cuts out. The phone says it's still connected but I have to turn wifi off and back on for anything to work. Could be my router also but it didn't seem to be doing this until I installed 8.3

mrmazak said:
Yes. You are correct
Either put the zip file on external sd card , put card into phone boot into recovery mode and install , or put file directly onto phone .
Easiest is to copy to phone while phone is connected to PC.
Bottom line is get zip file to the phone boot to recovery and install
Click to expand...
Click to collapse
Right on man! I am officially running 8.3 ROM with April 5th 2017 Security Patch Level! Geez.. it was not easy but I got this working!
MrMazak, I followed all your instructions on both links, so could you tell me what exactly I have on my phone? Is it rooted? Bootloader Unlocked? The phone seems to be working fine but I don't know what level of access I have. Honestly I don't even know exactly what the differences between all these terms are.
Also, do I have or not SU? One of the steps under the .bat I believe install it. How do I access it?
Thanks again!
---------- Post added at 10:19 PM ---------- Previous post was at 10:18 PM ----------
Weasel0 said:
Anyone else having wifi issues after upgrading? While watching videos it seems the internet cuts out. The phone says it's still connected but I have to turn wifi off and back on for anything to work. Could be my router also but it didn't seem to be doing this until I installed 8.3
Click to expand...
Click to collapse
My install is pretty fresh, couple of hours, but as far as I can tell all is working fine with Wifi, As a matter of fact this is a new device only connected with Wifi and no SIM Card.... internet works fine.

Please Recommend Me The Top 2/3 Most Stable Slim Roms - New Axon 7 User!

I hate asking this as each has his own preference, however, I have only just ordered my ZTE Axon device as it was such a good offer, being even cheaper than brand new 2018 mid rangers! I purchased the device brand new and sealed for just £193 ($274) so you cannot go wrong.
My current phone was the Sony Xperia XZ Premium but I am giving it away to my wife and need another to replace it.
After some reading it seems the first thing I need to do is install all drivers and run the Axon 7 Tool kit. This will unlock bootloader, root and flash recovery from my understanding.
Then I can proceed to installing a custom rom of my choice followed by immediately flashing a modem otherwise I will not have any signal. Would this be everything needed to successfully running a custom rom trouble free?
Lastly, I would like a simple rom, preferably based on stock/vanilla Android, slim and bloat free. Something very basic, bug free and made for pure speed and decent battery. What are the top recommended roms with this regard? I did look into these, anything better? What are the differences? Thank you so much for your advise.
https://forum.xda-developers.com/axon-7/development/rom-slm-dfnr-t3716825
https://forum.xda-developers.com/axon-7/development/rom-slm-version-t3704143
https://forum.xda-developers.com/axon-7/development/rom-dark-rom-t3654264

kanej2006 said:
I hate asking this as each has his own preference, however, I have only just ordered my ZTE Axon device as it was such a good offer, being even cheaper than brand new 2018 mid rangers! I purchased the device brand new and sealed for just £193 ($274) so you cannot go wrong.
My current phone was the Sony Xperia XZ Premium but I am giving it away to my wife and need another to replace it.
After some reading it seems the first thing I need to do is install all drivers and run the Axon 7 Tool kit. This will unlock bootloader, root and flash recovery from my understanding.
Then I can proceed to installing a custom rom of my choice followed by immediately flashing a modem otherwise I will not have any signal. Would this be everything needed to successfully running a custom rom trouble free?
Lastly, I would like a simple rom, preferably based on stock/vanilla Android, slim and bloat free. Something very basic, bug free and made for pure speed and decent battery. What are the top recommended roms with this regard? I did look into these, anything better? What are the differences? Thank you so much for your advise.
https://forum.xda-developers.com/axon-7/development/rom-slm-dfnr-t3716825
https://forum.xda-developers.com/axon-7/development/rom-slm-version-t3704143
https://forum.xda-developers.com/axon-7/development/rom-dark-rom-t3654264
Click to expand...
Click to collapse
As for the SL!M roms i made ( making some advertisement here ) i only can advise looking at these ones as they are aroma roms and can be debloated further. Battery tweak is included and choice between SuperSU and Magisk is possible. These roms are stock-based as to preserve, imo, the sound quality of the phone as it came out of the box. No bug issues imo and fully up to date :
https://forum.xda-developers.com/axon-7/development/rom-slm-dfnr-t3716825
Based on MiFavor5.0 (CN) but fully applyable on all versions
https://forum.xda-developers.com/axon-7/development/rom-slm-dfnr-t3735003
Based on stock G version but fully applyable on all versions and with the latest security patches of the A2017G-N(ougat)-B09
But then again others can comment on my slim roms better then i can perhap :cyclops:
Futhermore i do not advice https://forum.xda-developers.com/axon-7/development/rom-slm-version-t3704143 as it is was my first version of MiFavor 5.0. Instead use the first link.
Didn't used the last one you mentioned based on LOS but others can advice more into this.
Good Luck and ENJOY !

raystef66 said:
As for the SL!M roms i made ( making some advertisement here ) i only can advise looking at these ones as they are aroma roms and can be debloated further. Battery tweak is included and choice between SuperSU and Magisk is possible. These roms are stock-based as to preserve, imo, the sound quality of the phone as it came out of the box. No bug issues imo and fully up to date :
https://forum.xda-developers.com/axon-7/development/rom-slm-dfnr-t3716825
Based on MiFavor5.0 (CN) but fully applyable on all versions
https://forum.xda-developers.com/axon-7/development/rom-slm-dfnr-t3735003
Based on stock G version but fully applyable on all versions and with the latest security patches of the A2017G-N(ougat)-B09
But then again others can comment on my slim roms better then i can perhap :cyclops:
Futhermore i do not advice https://forum.xda-developers.com/axon-7/development/rom-slm-version-t3704143 as it is was my first version of MiFavor 5.0. Instead use the first link.
Didn't used the last one you mentioned based on LOS but others can advice more into this.
Good Luck and ENJOY !
Click to expand...
Click to collapse
^ Thank you very much raystef66 for your speedy response! I will go for this version - https://forum.xda-developers.com/axon-7/development/rom-slm-dfnr-t3735003
Fingers crossed I should receive my Axon 7 Sunday or Monday at the very latest. First Thing I'll run the Axon 7 Toolkit so that I can unlock the bootloader, have recovery and root then I'll be able to flash your rom, looking forward into doing so!
I'll keep you informed in the coming days when complete. :good:

kanej2006 said:
^ Thank you very much raystef66 for your speedy response! I will go for this version - https://forum.xda-developers.com/axon-7/development/rom-slm-dfnr-t3735003
Fingers crossed I should receive my Axon 7 Sunday or Monday at the very latest. First Thing I'll run the Axon 7 Toolkit so that I can unlock the bootloader, have recovery and root then I'll be able to flash your rom, looking forward into doing so!
I'll keep you informed in the coming days when complete. :good:
Click to expand...
Click to collapse
Yeah, very exciting isn't it :good: It's a damn good phone, quick, nice quality screen and an amazing sound... !
I assume you'll get the G version ? The SL!M➃ is based on this G-version (btw, take a look at the DownloadCenter to have all necessary files) and keeps all things to stock. Just some minor mods and improvements, nothing fancy as to stay stock. With the battery tweak included i always get >7h SOT. But that depends of course on usage. But then again i do alot in a day . Some others have no benefit on the battery tweak but i'll hope you end up with a descent SOT.
Keep us posted :good:

raystef66 said:
Yeah, very exciting isn't it :good: It's a damn good phone, quick, nice quality screen and an amazing sound... !
I assume you'll get the G version ? The SL!M➃ is based on this G-version (btw, take a look at the DownloadCenter to have all necessary files) and keeps all things to stock. Just some minor mods and improvements, nothing fancy as to stay stock. With the battery tweak included i always get >7h SOT. But that depends of course on usage. But then again i do alot in a day . Some others have no benefit on the battery tweak but i'll hope you end up with a descent SOT.
Keep us posted :good:
Click to expand...
Click to collapse
Sounds good! I would be happy with around 7 hours SOT. Once received I'll let you know what version I receive, however, I'm guessing I'll get the Chinese version as it's coming from Dubai, UAE (Middle East) and most likely it'll come from China and not EU as it's much closer.
I have everything ready accept for a flashable TWRP. The link appears down for me and I was not able to find a flashable version, could you please give me a link of a working one? I was only able to find a non flashable version which is run via CMD/fastboot commands.
I would much rather a flashable recovery in which I can flash once installing your rom along with SuperSU or Magisk. Regards!

kanej2006 said:
Sounds good! I would be happy with around 7 hours SOT. Once received I'll let you know what version I receive, however, I'm guessing I'll get the Chinese version as it's coming from Dubai, UAE (Middle East) and most likely it'll come from China and not EU as it's much closer.
I have everything ready accept for a flashable TWRP. The link appears down for me and I was not able to find a flashable version, could you please give me a link of a working one? I was only able to find a non flashable version which is run via CMD/fastboot commands.
I would much rather a flashable recovery in which I can flash once installing your rom along with SuperSU or Magisk. Regards!
Click to expand...
Click to collapse
The TWRP is inside the toolkit, so you can flash it downthere imo. Never done this that way though as in those early days i used this one to do everything. But use the toolkit and you're good to go.

raystef66 said:
The TWRP is inside the toolkit, so you can flash it downthere imo. Never done this that way though as in those early days i used this one to do everything. But use the toolkit and you're good to go.
Click to expand...
Click to collapse
Ah good to hear, glad it's included in the kit. So I can simply use the one from the kit to flash recovery after flashing your rom? Because in the instructions it mentions we have to manually flash recovery after the rom.

kanej2006 said:
Ah good to hear, glad it's included in the kit. So I can simply use the one from the kit to flash recovery after flashing your rom? Because in the instructions it mentions we have to manually flash recovery after the rom.
Click to expand...
Click to collapse
That depends. I dont know what version of twrp is installed via the toolkit. Perhaps it checkes for the latest when it updates but not sure. But if a certain version is installed which is not the latest, put the latest twrp.img onto your int or extSD and flash via your twrp you've installed.
Second, if your phone would be an CN version and not a G, you'll have to install the Universal BL and your specific modem as described in the rom thread. You can find them in the link of the rom thread. So, after installing the Universal BL (which has an older version of twrp !) , you'd have to install the latest via twrp too. So just flash the twrp image and you're good to go.
Btw, i made a flashable zip before of that Universal BL which replaces the old twrp with the 3.1.1.0 version, which will do fine too.
Here's the link : https://androidfilehost.com/?fid=673791459329066038 (it also works on the SLIM4 as it just replaces twrp)
So after installing this version, you dont need to flash another twrp (as it brings you to the 3.1.1.0 as said)

kanej2006 said:
Ah good to hear, glad it's included in the kit. So I can simply use the one from the kit to flash recovery after flashing your rom? Because in the instructions it mentions we have to manually flash recovery after the rom.
Click to expand...
Click to collapse
Uuhh. I think you'll get the G version. Anything else than China and US gets G. With that said, I recommend you two things:
- (If you get a G) Use Controllerboy's guide instead of the toolkit. Lately a lot of stuff is going wrong with the toolkit
-Whatever happens, DO NOT ATTEMPT TO RELOCK THE BOOTLOADER.
-Once you have TWRP, just follow the instructions on each ROM. Never flash stuff from other models.
-Take the TWRP img either from raystef66's download center or from twrp.me

raystef66 said:
I dont know what version of twrp is installed via the toolkit. Perhaps it checkes for the latest when it updates but not sure. But if a certain version is installed which is not the latest, put the latest twrp.img onto your int or extSD and flash via your twrp you've installed.
Second, if your phone would be an CN version and not a G, you'll have to install the Universal BL and your specific modem as described in the rom thread. You can find them in the link of the rom thread. So, after installing the Universal BL (which has an older version of twrp !) , you'd have to install the latest via twrp too. So just flash the twrp image and you're good to go.
Btw, i made a flashable zip before of that Universal BL which replaces the old twrp with the 3.1.1.0 version, which will do fine too.
Here's the link : https://androidfilehost.com/?fid=673791459329066038 (it also works on the SLIM4 as it just replaces twrp)
So after installing this version, you dont need to flash another twrp (as it brings you to the 3.1.1.0 as said)
Click to expand...
Click to collapse
Will do. You are right, the toolkit automatically checks for the latest update and it finds version 3.1.1.0.
Choose an username... said:
Uuhh. I think you'll get the G version. Anything else than China and US gets G. With that said, I recommend you two things:
- (If you get a G) Use Controllerboy's guide instead of the toolkit. Lately a lot of stuff is going wrong with the toolkit
-Whatever happens, DO NOT ATTEMPT TO RELOCK THE BOOTLOADER.
-Once you have TWRP, just follow the instructions on each ROM. Never flash stuff from other models.
-Take the TWRP img either from raystef66's download center or from twrp.me
Click to expand...
Click to collapse
I did see on the forum users attempting to relock the bootloader and it worsened things, I will not attempt this.
Should be able to let you know tomorrow or the day after what version I get and hopefully when I successfully gain recovery and root access!
I just hope I don't get the dead microSD bug that many people have mentioned. Top of the range 64Gb/128Gb MicroSD cards can be costly so I would not like to have them corrupted!

@raystef66, Do you have any other download links for your rom aside from androidfilehost? I tried several different servers but all keep randomly freezing otherwise saying 5 hours, 6 hours, 11 hours and 15 hours. Extremely slow download.

If you want to try a more Android vanilla ROM, then I suggest AICP. Be sure to use the unofficial builds by genesixxbf3. They are very stable and have good features.
https://forum.xda-developers.com/axon-7/development/rom-aicp-12-1-t3611013

kanej2006 said:
@raystef66, Do you have any other download links for your rom aside from androidfilehost? I tried several different servers but all keep randomly freezing otherwise saying 5 hours, 6 hours, 11 hours and 15 hours. Extremely slow download.
Click to expand...
Click to collapse
Yeah, sometime AFH can be cruel. Just depends. I tried the Washington DC just a moment and no problems there. I just advice, take one and let it take it's time. Some way or another the download speed gets stable enough And then again, you still have a bit of time don't you or has it dropped of yet with the postman :cyclops: Do I Hear a heartbeat there ? :good:

raystef66 said:
Yeah, sometime AFH can be cruel. Just depends. I tried the Washington DC just a moment and no problems there. I just advice, take one and let it take it's time. Some way or another the download speed gets stable enough And then again, you still have a bit of time don't you or has it dropped of yet with the postman :cyclops: Do I Hear a heartbeat there ? :good:
Click to expand...
Click to collapse
Haha, no, not yet received! Where I am living at the moment, the weekend is Friday and Saturday, Sunday to Thursday work, strange but that's the way it is.
The seller estimates the item to arrive on Sunday or Monday, hopefully Sunday.
In the end the Netherland's sever finally managed to get me the 2.1Gb download complete. I did try others but were slower. Good thing in your rom you included the 3 different models for the Axon 7. I'm yet to see which one I receive!

Confirmed G version received.

kanej2006 said:
Confirmed G version received.
Click to expand...
Click to collapse
The AcTiOn can begin :good:
Use this guide like said above and you'll be ok.

raystef66 said:
The AcTiOn can begin :good:
Use this guide like said above and you'll be ok.
Click to expand...
Click to collapse
Not working, been trying for hours.
Not connecting despite all drivers installed, including Qualcom driver. Followed all instructions as stated. Stuck from number 20. When entering this command I get ''failed to connect''
When typing in adb devices it finds my device.
1) Backup all the data of your phone's internal memory that you don't want to lose. Copy it to your PC
2) Download the axon7tool from here: http://www.filedropper.com/axon7tool-15-win64
3) Download minimal adb and fastboot from here: https://www.androidfilehost.com/?fid=457095661767103465
4) Unzip the minimal adb and fastboot file, place the folder with the files in it somewhere you can easily find it
5) Place the axon7tool exe in the same folder as adb.exe and rename it to "axon7tool.exe" (it's easier to work with that way)
6) Download the TWRP .img and .bin files from here: https://drive.google.com/open?id=0B4...nlaZU1NRldoRjA
7) Place the TWRP .img file in the same folder as "adb.exe" and "axon7tool.exe", rename it to "recovery.img"
8) Make a copy of the "recovery.img" file and name it "recovery.bin". Leave it in the same folder
9) Go to settings in your phone and go to "About Phone". Tap "Build Number" 7 times to make the Developer Options available
10) Go to "Developers options" and tick "Allow OEM unlock" and "Android Debugging"
11) Connect your Axon 7 to your PC
12) Open a command window by holding shift and right-clicking in a blank space in the folder where the "adb.exe", " axon7tool.exe", "recovery.img" and "recovery.bin" files are located. Click "Open command window here"
13) Type "adb devices" and hit enter. You should see one device with some code listed
14) Type "adb reboot edl" and hit enter. Your device will reboot to EDL mode. It appears to be off, but it is in fact in EDL mode.
15) Go to Device Manager on your pc and verify your Axon 7 is listed as "QUSB_BULK"
16) In command, type "axon7tool -r gpt boot recovery" and hit enter
17) After it is executed, your phone will reboot. Wait until it has fully booted.
18) In command, type "adb reboot edl"
19) Verify you now have 3 backup files in your ADB folder for gpt, recovery and boot. These are backup files in case something goes wrong
20) In command, type "axon7tool -w recovery" - STUCK HERE - FAILED

kanej2006 said:
Not working, been trying for hours.
20) In command, type "axon7tool -w recovery" - STUCK HERE - FAILED
Click to expand...
Click to collapse
You're on nougat ? Look into about phone for that.
Afaik, you'll have to be on MM. So downgrade/rollback if on Nougat (look into DownloadCenter for B10 or B11) and do the procedure all over again.
Imo it's due to that.
edit: sure you have the recovery.img and bin in your adb folder ?

raystef66 said:
You're on nougat ? Afaik, you'll have to be on MM. So downgrade/rollback if on Nougat (look into DownloadCenter for B10 or B11) and do the procedure all over again.
Imo it's due to that.
edit: sure you have the recovery.img and bin in your adb folder ?
Click to expand...
Click to collapse
No, I am on stock MM.

kanej2006 said:
No, I am on stock MM.
Click to expand...
Click to collapse
Should work then.
Can you download recovery again. Check all characters if they're all written ok.
Sure the toolkit cannot bring enlightment too ?

wifi not working on android p

I've upgraded to Android p and a few minutes ago I've rooted my phone
Since then my wifi won't work, what can I do?
Ok the root did not work

TheZadok42 said:
I've upgraded to Android p and a few minutes ago I've rooted my phone
Since then my wifi won't work, what can I do?
Ok the root did not work
Click to expand...
Click to collapse
Kernel or firmware mismatch
Sent from my PH-1 using Tapatalk

Reflash it
TheZadok42 said:
I've upgraded to Android p and a few minutes ago I've rooted my phone
Since then my wifi won't work, what can I do?
Ok the root did not work
Click to expand...
Click to collapse
Rooting a Beta Rom is usually a bad thing. My only suggestion is reflash following Essential's steps...

Wolfhawke said:
Rooting a Beta Rom is usually a bad thing. My only suggestion is reflash following Essential's steps...
Click to expand...
Click to collapse
Why? Root works fine with it, this has nothing to do with that.

crixley said:
Why? Root works fine with it, this has nothing to do with that.
Click to expand...
Click to collapse
Root works fine with what? A dev preview OS.
If someone is having issues then it must not be working ok.

jmill75 said:
Root works fine with what? A dev preview OS.
If someone is having issues then it must not be working ok.
Click to expand...
Click to collapse
Yes it works fine and the issue has nothing to do with root. Probably half of us using it are rooted without issue

Bit of a thread-dig here, but I just got a PH1 and went straight to P (not rooted yet) and saw no WiFi. Wouldn't even turn on.
The phone came with 7.1.1 and I flashed P via fastboot. Tried rebooting and monkeying with it, but never saw any progress, no list of networks, etc.
7.1.1 did see WiFi for the 5 minutes I ran it.
Flashed latest stable 8.1 and it WiFi worked again immediately.
Then flashed 9 a second time and now WiFi works fine.
My best guess is the 7.1.1->9 transition has some kind of issue (doesn't quite make sense to me, given that I think EVERYTHING is being flashed by the 9 update, but this did fix it).

tliebeck said:
Bit of a thread-dig here, but I just got a PH1 and went straight to P (not rooted yet) and saw no WiFi. Wouldn't even turn on.
The phone came with 7.1.1 and I flashed P via fastboot. Tried rebooting and monkeying with it, but never saw any progress, no list of networks, etc.
7.1.1 did see WiFi for the 5 minutes I ran it.
Flashed latest stable 8.1 and it WiFi worked again immediately.
Then flashed 9 a second time and now WiFi works fine.
My best guess is the 7.1.1->9 transition has some kind of issue (doesn't quite make sense to me, given that I think EVERYTHING is being flashed by the 9 update, but this did fix it).
Click to expand...
Click to collapse
Just got my Essential Phone today as well and did the exact same thing, flashed straight from 7.1.1 to P. I thought I was seriously going to have to send the phone back due to a broken Wi-Fi chip or something. You are seriously a lifesaver!

rignfool said:
Kernel or firmware mismatch
Sent from my PH-1 using Tapatalk
Click to expand...
Click to collapse
What can be done about this? I am having the same issue, but I have flashed the whole "Back to Stock" set for P beta 2 from the other thread.

Saundersmtt said:
What can be done about this? I am having the same issue, but I have flashed the whole "Back to Stock" set for P beta 2 from the other thread.
Click to expand...
Click to collapse
If I take your post at face value... You have a bad flash and need to try again... Or blame your cable... And go buy a new one...
Otherwise... You have a bad download... Or there is something wrong wrong with your zip or batch/script... Or you're not completely unlocked

Listen guys, the issue is bc the ota zip for p doesnt flash both slots and the fastboot images zip doesnt either. If u look at the script (flashall. Bat) with a text editor it specifically shows only flashing one slot. To fix the wifi issue, u need the july oreo images file and that flashall. Bat flashes both slots and will fix the lost wifi and or Bluetooth. Once u do that, it reboots twice and go back to dev options and renable usb debugging. Now u reboot bootloader and flash p. Now it should all work. Also, in doing this, you will have to lose your data.

Same here but can't roll back to Oreo
See.issue here but I seem.to not be able.to resolve wifi issue or roll back to Oreo. When I try to reflash it just says it expects a newer version of is. Any ideas?

1jason said:
See.issue here but I seem.to not be able.to resolve wifi issue or roll back to Oreo. When I try to reflash it just says it expects a newer version of is. Any ideas?
Click to expand...
Click to collapse
Yes flash the july oreo flashall. Bat

Saundersmtt said:
What can be done about this? I am having the same issue, but I have flashed the whole "Back to Stock" set for P beta 2 from the other thread.
Click to expand...
Click to collapse
I had the same problem. went back to stock on July's build (was on January's stock build previously) and reflashed P. Been smooth sailing ever since

jacksummers said:
Listen guys, the issue is bc the ota zip for p doesnt flash both slots and the fastboot images zip doesnt either. If u look at the script (flashall. Bat) with a text editor it specifically shows only flashing one slot. To fix the wifi issue, u need the july oreo images file and that flashall. Bat flashes both slots and will fix the lost wifi and or Bluetooth. Once u do that, it reboots twice and go back to dev options and renable usb debugging. Now u reboot bootloader and flash p. Now it should all work. Also, in doing this, you will have to lose your data.
Click to expand...
Click to collapse
The reason is because one of the OTAs did not have the partition you're looking for... And it created a mismatch somewhere...
You DO NOT need to have the same software on A and B... It just makes troubleshooting easier from our perspective... And... It forces you to reflash and probably fix the problem...
As intended... There should ALWAYS be a mismatch between A and B... At least a monthly security update... If not an Android versioning difference

Edited. We are all just trying to help others. Lets keep it that way.

so, uhmmm like yea...... there is this thread here, called the stock images thread (link for posterity https://forum.xda-developers.com/essential-phone/development/stock-7-1-1-nmj20d-t3701681 ) this is firmware images, directly from essential. I have added the remaining images that you dont get from essential, so that way you can reflash, and get the same version of software on both sides. there are wipe and no wipe bat files in there, twrp11 (the working twrp we have), and the fix red boot (in case you broke verity), and a stockboot.img (coincidentally the same file as called boot in the zip, but renamed for your twrp/rooting pleasure).
These images work great, many many many people have used them to go back and forth between O and P, OTA, or recover from catastrophe. As usual, beware of dragons, make SURE SURE SURE SURE you have a working adb/fastboot environment (use the version that comes with essentials drivers) (you can always do ADB VERSION or FASTBOOT --VERSION ) to check your version and where its working out of. It is 1 stop shopping. I also know the guy that makes the zips

jacksummers said:
Edited. We are all just trying to help others. Lets keep it that way.
Click to expand...
Click to collapse
Sorry if my post came off as harsh... I'll edit it... But this forum is literally littered with VAST amounts of guessing and misinformation...

rignfool said:
Sorry if my post came off as harsh... I'll edit it... But this forum is literally littered with VAST amounts of guessing and misinformation...
Click to expand...
Click to collapse
No prob, i understand the frustration.i assure you i was not guessing. I only post what i know is for sure. When faced with the exact same issue as OP i was forced to flash both slots to fix it. Yes, they could boot up with slightly different partitions, but the wifi was broken still. I believe the whole phone needed both slots flashed with each corresponding img simultaneously in order to resolve said issue. For whatever reason, i had both a and b screwed up. At the time i was trying to fix the ril and camera issues on the pixel 2 system image after flashing it on my essential. I want to get that working fully to release as a port.

jacksummers said:
No prob, i understand the frustration.i assure you i was not guessing. I only post what i know is for sure. When faced with the exact same issue as OP i was forced to flash both slots to fix it. Yes, they could boot up with slightly different partitions, but the wifi was broken still. I believe the whole phone needed both slots flashed with each corresponding img simultaneously in order to resolve said issue. For whatever reason, i had both a and b screwed up. At the time i was trying to fix the ril and camera issues on the pixel 2 system image after flashing it on my essential. I want to get that working fully to release as a port.
Click to expand...
Click to collapse
Wouldn't it be easier to attempt to port the 2 or 3 features we don't have as a separate systemui.apk or framework-res.apk?
And use Magisk?
Since we don't have that fancy hardware photo rendering thingymabob

OnePlus 8 Pro refuses to install TWRP. Qualcomm Crash Dumps every time. Any advice?

I want to install TWRP as my recovery I've tried at least four different versions that are listed here and a few others from other links:
https://forum.xda-developers.com/t/...p-for-oneplus-8-8-pro-unified-stable.4101313/
I'm not having driver issues anymore so I'm working with adb and fastboot fine. All commands are going through fine and I've tried flashing to recovery_a and recovery_b. Factory resetting doesn't resolve the issue. Every walkthrough I find I get to says flash then boot to TWRP but every time I flash it qualcomm dumps and every time I boot to it it qualcomm dumps.
Is there something corrupted in my recovery I need to wipe somehow? If so how do I wipe it because the only command I found online that would run was fastboot -w and that didn't fix the issue either.
Honestly really annoying at this. This is my 4th OnePlus phone and I've never had so many issues flashing it.
Edit:
I have also tried to do whatever steps are needed to go back to base stock and OS and it doesn't seem to work either. Any help would be appreciated.
Edit 2:
I did it. For anyone who finds this thread in the future the MSM tool did finally work. This is the video I used in the end
(I muted it.) and the first few starts it failed. I went into the properties of the MSM exe and under compatibility checked ran as admin. I also did install the qualcomm driver at some point way before this so not sure if that helped. The MSM tool still didn't work until I started it, turned my phone off, held both volume buttons (not the power) while plugging the phone in. All the stuff online I saw had people starting the program at this point but mine had started already and was in a "waiting for device" state when it worked.
What a lifesaver. Won't be messing around with this again until TWRP is available.

Because you are unable to flash phone's Stock ROM take phone to authorized service center and let them fix it.

Flash stock recovery. TWRP is but compatible with OOS11 for 8/Pro.
Edit: not

Lossyx said:
Flash stock recovery. TWRP is but compatible with OOS11 for 8/Pro.
Click to expand...
Click to collapse
I have had so much trouble figuring that out too. Do you have a good link for that? I can't find an easy way to do it. I've seen people recommend the msmdownloadtool but every time I use it it doesn't pick up my phone.
I've settled with Lineage OS and Gapps until I figure out more.

TheFloppyDisk said:
I have had so much trouble figuring that out too. Do you have a good link for that? I can't find an easy way to do it. I've seen people recommend the msmdownloadtool but every time I use it it doesn't pick up my phone.
I've settled with Lineage OS and Gapps until I figure out more.
Click to expand...
Click to collapse
Meant to say it's **not** compatible with Android 11 yet.

Lossyx said:
Meant to say it's **not** compatible with Android 11 yet.
Click to expand...
Click to collapse
Sorry if I wasn't clear either. I was wondering if you have a good resource for flashing the stock again. I haven't been able to myself.

TheFloppyDisk said:
Sorry if I wasn't clear either. I was wondering if you have a good resource for flashing the stock again. I haven't been able to myself.
Click to expand...
Click to collapse
The same way to flashed TWRP.
fastboot flash recovery recovery_a and _b.
In the future, you should not flash both slots, just flash without specifying _a or _b.
Recovery image can be obtained here;
Android Dumps / oneplus / oneplus8pro · GitLab
GitLab Enterprise Edition
dumps.tadiphone.dev
Although i am not sure which OOS version you use, so you might have to change branch

Lossyx said:
The same way to flashed TWRP.
fastboot flash recovery recovery_a and _b.
In the future, you should not flash both slots, just flash without specifying _a or _b.
Recovery image can be obtained here;
Android Dumps / oneplus / oneplus8pro · GitLab
GitLab Enterprise Edition
dumps.tadiphone.dev
Although i am not sure which OOS version you use, so you might have to change branch
Click to expand...
Click to collapse
I hate to be this much of a noob about it but I see a recovery file listed in the link you sent. Is that the recovery I flash? And if so after flashing is this branch also a stock rom? I've been trying for a while now just to get back to the basic oxygen that comes with the phone but it's been a nightmare for me and it feels like no resource I find fully explains it.

TheFloppyDisk said:
I hate to be this much of a noob about it but I see a recovery file listed in the link you sent. Is that the recovery I flash? And if so after flashing is this branch also a stock rom? I've been trying for a while now just to get back to the basic oxygen that comes with the phone but it's been a nightmare for me and it feels like no resource I find fully explains it.
Click to expand...
Click to collapse
If you want OOS back / new start, best way is really to use MSM. Haven't really used it, so can't help you much. There are tutorials online / YouTube though

Lossyx said:
If you want OOS back / new start, best way is really to use MSM. Haven't really used it, so can't help you much. There are tutorials online / YouTube though
Click to expand...
Click to collapse
Gotcha. Unfortunately I haven't been able to get MSM to recognize my phone yet but I guess I will keep working on it and see what I can do. Thanks for your help.

TheFloppyDisk said:
Gotcha. Unfortunately I haven't been able to get MSM to recognize my phone yet but I guess I will keep working on it and see what I can do. Thanks for your help.
Click to expand...
Click to collapse
It is very sensitive to which USB port you use. For some people only USB2.0 works, for me USB3 works fine as long as it's chipset USB3. The second ASMedia controller doesn't work.
Also, use original cable, and switch off the phone completely, get MSM to the point it's waiting for device so start the download before connecting phone, then while holding the volume keys connect the USB cable and it should instantly start flashing.

Question Android 12 for Cricket Dream 5G?

Anyone have the Android 12 firmware that Cricket released from this Reddit thread? There is one custom rom developed in this XDA thread but not sure how stable it is.

Hey dude, I'm currently using the a teams custom ROM From here.
I've used all three attached, only issues I found in them are as followed
Android 12 rom's Bluetooth will connect but won't send audio, to fix this go to settings/phh settings/misc/ there you'll find a bunch of options, Im using Android 11 rn so I can't tell u which one needs to be enabled ATM
Android 11 one doesn't have this issue, and all three won't allow lock screen or fingerprint, I couldn't find a fix for this)

Riotruth said:
Hey dude, I'm currently using the a teams custom ROM From here.
I've used all three attached, only issues I found in them are as followed
Android 12 rom's Bluetooth will connect but won't send audio, to fix this go to settings/phh settings/misc/ there you'll find a bunch of options, Im using Android 11 rn so I can't tell u which one needs to be enabled ATM
Android 11 one doesn't have this issue, and all three won't allow lock screen or fingerprint, I couldn't find a fix for this)
Click to expand...
Click to collapse
Thanks for the reply.
I'm a little confused with the aio toolkit requirement.
1. Is the aio toolkit is to help install TWRP and Magisk?
2. Where is the download link to aio toolkit?
3. How do you install the aio toolkit?

I couldn’t tell you on that, I never played around with it. Over on that thread you get 3 downloads, 2 android 12 gsm, and 1 android 11 gsm.
I
They all come with magisk pre installed, all you need is TWRP.

Riotruth said:
I couldn’t tell you on that, I never played around with it. Over on that thread you get 3 downloads, 2 android 12 gsm, and 1 android 11 gsm.
I
They all come with magisk pre installed, all you need is TWRP.
Click to expand...
Click to collapse
Ok. That's what I have in mind too. Normally you need to unlock bootloader and then install TWRP before you can flash the custom rom.
I thought the aio toolkit include the TWRP and Magisk. So you install it then boot to the stock recovery to flash the rom.

Yeah. Theres another post here for getting just twrp and magisk. I'm to lazy to quote it lol, but that's how I got it originally, I then flashed these ROM's without a issue.

Riotruth said:
Yeah. Theres another post here for getting just twrp and magisk. I'm to lazy to quote it lol, but that's how I got it originally, I then flashed these ROM's without a issue.
Click to expand...
Click to collapse
I finally installed the custom GSI roms. There is one major issue is that the phone don't ring for incoming calls. After 5 rings, it goes to the voicemail. I can make calls.
Did you have this problem? Which rom are you using?
I installed TWRP using AIO Toolkit. Not sure how you install your TWRP.
I wonder if the modified boot.img from Magisk might be the cause to the phone ring issue since my stock ROM is updated to Android 11 2023 February. The developer created the custom GSI roms and TWRP and Pre-patched using an older Android 11 in May 2022.

magi44ken said:
I finally installed the custom GSI roms. There is one major issue is that the phone don't ring for incoming calls. After 5 rings, it goes to the voicemail. I can make calls.
Did you have this problem? Which rom are you using?
I installed TWRP using AIO Toolkit. Not sure how you install your TWRP.
I wonder if the modified boot.img from Magisk might be the cause to the phone ring issue since my stock ROM is updated to Android 11 2023 February. The developer created the custom GSI roms and TWRP and Pre-patched using an older Android 11 in May 2022.
Click to expand...
Click to collapse
hi.
i have not noticed that at all. but i dont do calls lol.
i installed twrp myself, and am using the roms. would you mind explaining how you used AIOToolkit?

Riotruth said:
hi.
i have not noticed that at all. but i dont do calls lol.
i installed twrp myself, and am using the roms. would you mind explaining how you used AIOToolkit?
Click to expand...
Click to collapse
1. AiO Toolkit
Sure. In case you don't have a copy of the full AIO Toolkit that includes unbrick roms and rooted stuff. I upload a lite of the AIO Toolkit that includes only the rooted stuff, not full rom. It's only 360MB.
Public - Google Drive
drive.google.com
You will have to use Linux in order. I recommend Ubabutu v22 instead v23. I couldn't get it work in Windows.
Follow the direction in the readdme.md to install MTKClient and requirements: https://github.com/bkerler/mtkclient
After completing the installation, make sure you enable USB debugging and run `adb devices` and confirm to enable "Allow to use usb debugging" in the phone.
Run the AIO Toolkit CLI script: Main_Menu.sh. The simplest way to run this Main_Menu.sh is open the File Manager and right click on it and select Run. It will give you instruction what to do after you select the menu choice.
In the main meanu, select the bootloader menu item for unlocking the bootloader and select recovery menu item installing TWRP and Magisk.
If it ask to enter brom mode, just power off the phone, hold the volume up and down buttons for 2 seconds and connect the USB cable to PC. It should automatically recognize and do it stuff.
2. Bluetooth Fix
Also there is a fix for bluetooth by enabling this settings in any of the custom rom you use.
Go Settings > Phh Settings > Misc Features. Under Other section, check "Force disable A2DP Offline"
3. Phone call ring
Can you do a quick call test for me if you don't mind? Just have someone call your Dream 5G phone. If it rings, it means it works. If it works, can you list baseband version and custom rom you are using?
I really wanted to use Android 12 if I can fix the phone call ringg issue.
4. TWRP v3.7 update?
What version of TWRP are you using? is 3.6.x? Have you upgrade to v3.7x that is fully Android 12 compatiable?
I was going to do the manual process but there was only threads about it and not sure how relaible. So I use the AIO Toolkit.
However if you able to upgrade to v3.7, please share the steps.
Let me know if you need to help.