Hi to all.
I'm working with Amlogic ICS M3 source tree... I have to implement latest Realtek 8192cu wifi driver to source tree.
I'm having problems connecting to any kind of encrypted wifi network. Open networks works just fine.
What I did:
- remove all amlogic wifi stuff
- overtook wpa_supplicant_8 from AOSP ics-mr1
- integrated realtek patches to wpa_supp, init.rc, BoardConfig... as described in realtek's sdk
- integrated driver in kernel, wifi module is built as module, cfg80211 is built-in
- I'm not using wext but nl80211
- kernel is Amlogic 2.6.34 release
Now crossed my mind that wifi.c/wifi.h from libhardware_legacy I obtained from CM ics branch.... maybe that could be a problem?
Any hint?
Regards
Code:
#include
/*
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or the current economic crisis caused by you following these
* directions. YOU are choosing to make these modificiations, and
* if you point your finger at me for messing up your device, I will
* laugh at you.
*/
The kernel is based off latest sources from "LGE OPEN SOURCE" and is compatible with D693 and D693n
ThunderSonic Sound Control Engine (credits to varunchitre)
Dynamic Fsync Control (credits to faux123)
EXFAT SUPPORT
FRANDOM SUPPORT
Disabled Gentle fair sleepers
Enabled arch power
block: Added SIO IOScheduler
block: Add BFQ IOScheduler
block: Add fiops scheduler
fs: added Samsung's F2FS support
Disabled CRC check in MMC for 30% extra performance with IO
cpufreq: ThunderX power saving CPU governor (credits to varunchitre)
cpufreq: Alucard
DOWNLOAD
Version 1
Version 2
INSTRUCTIONS
- Just flash the zip you want in recovery and you are good to go!
XDA:DevDB Information
[KERNEL][LP][3.10.84] LG OPTIMUS G3 STYLUS [MT6582] Phoenix V1, Kernel for all devices (see above for details)
Contributors
chijure, varun.chitre15, faux123, getakgt1
Source Code: https://github.com/chijure/android_kernel_lge_MT6582-common
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 01
Stable Release Date: 2016-11-16
Created 2016-11-17
Last Updated 2016-12-03
Changelog
Phoenix V1
Code:
- Initial Release
Phoenix V2
Code:
-Add EXFAT SUPPORT
-Add OTG SUPPORT
-Add FIOPS SCHEDULER
-Add SIO SCHEDULER
-Add ALUCARD GOVERNOR
-Add FRANDOM
-Disable crc check for 30% extra performance
-NOATIME and NODIRATIME by default
-Disabled GFS and enabled ARCH_POWER
reserved 2
are you sure otg support is added? i tested it and didn't worked, does it need some mod on the rom?
gkillershots said:
are you sure otg support is added? i tested it and didn't worked, does it need some mod on the rom?
Click to expand...
Click to collapse
Sorry but the otg support didn't work
Chijure, could you compile 3.10 kernel to an Alcatel Device (MT6572 KK) We have kernel sources. We'd appreciate all your help!
Thanks in advance!
@chijure is this built for stock official lollipop rom ?
eternal70 said:
@chijure is this built for stock official lollipop rom ?
Click to expand...
Click to collapse
yes lollipop roms or ports roms lollipop
imlatindev_Faustino said:
Chijure, could you compile 3.10 kernel to an Alcatel Device (MT6572 KK) We have kernel sources. We'd appreciate all your help!
Thanks in advance!
Click to expand...
Click to collapse
thank you
chijure said:
Changelog
Phoenix V1
Phoenix V2
Click to expand...
Click to collapse
:good: Great!
Can you build a new version with latest commits?
Herkese selam. Bu çekirdek çok güzel ama magisk yüklemiyor. Lütfen yardım ediniz..
/* WARNING*/
I will not be held responsible for anything that happens to your device after flashing this kernel. If you don't know the basic procedures of flashing/modding/unbricking your device please stay with stock MIUI.
/*Features*/
* Built using official sources
* Synced with stable Linux-3.18
* Wake gestures: doubletap2wake & sweep2wake
* Sweep2sleep
* Bfq I/O scheduler
* Underclocked both clusters to 400MHz
* Custom userspace voltage control
* Sound control: headphone digital gain & mic gain
* ChaCha20 based CRNG backport from Linux-4.9
* Sdcardfs synced with AOSP-3.18
* EXT4 FS synced with AOSP-3.18
* arm64/crypto backports from mainline Linux
/*Installation*/
* Make sure you are on stock MIUI kernel before flashing
* Flash kernel zip with twrp. No need to wipe anything.
/*DOWNLOAD*/
https://drive.google.com/folderview?id=1SClj6ZWSkVBLWHYFvwdKpH-eZ0r7yC95
/*FAQ*/
*Will you add tons of those cool sounding custom governors/schedulers?
- No. Interactive & bfq ftw.
* Will it work on custom roms?
- It might work but expect things to be broken
* Will you add custom rom support in future?
- I'm a hardcore MIUIer. So no.
* Will you add overclocking?
- I've already unlocked the max available frequencies from caf i.e big - 1.49GHz/little - 1.2GHz. Beyond this I believe it's completely useless on modern chipsets.
* Will you add QC 2/3/4/5/6....∞ support?
- No
* How power efficient is your kernel?
- Just don't expect the battery life of an inverter.
XDA:DevDB Information
Aftershock, Kernel for the Xiaomi Redmi 4X
Contributors
Ashish94
Source Code: https://github.com/AshishM94/Santoni
Kernel Special Features:
Version Information
Status: Beta
Current Beta Version: Rc1
Beta Release Date: 2018-03-09
Created 2018-03-09
Last Updated 2018-03-09
/* WARNING*/
I will not be held responsible for anything that happens to your device after flashing this kernel. If you don't know the basic procedures of flashing/modding/unbricking your device please stay with stock MIUI.
/*Features*/
* Built using official sources
* Synced with stable Linux-3.18
* Wake gestures: doubletap2wake & sweep2wake
* Sweep2sleep
* Bfq I/O scheduler
* Underclocked both clusters to 400MHz
* Custom userspace voltage control
* Sound control: headphone digital gain & mic gain
* ChaCha20 based CRNG backport from Linux-4.9
* Sdcardfs synced with AOSP-3.18
* EXT4 FS synced with AOSP-3.18
* arm64/crypto backports from mainline Linux
/*Installation*/
* Make sure you are on stock MIUI kernel before flashing
* Flash kernel zip with twrp. No need to wipe anything.
/*DOWNLOAD*/
https://drive.google.com/folderview?id=1SClj6ZWSkVBLWHYFvwdKpH-eZ0r7yC95
/*FAQ*/
*Will you add tons of those cool sounding custom governors/schedulers?
- No. Interactive & bfq ftw.
* Will it work on custom roms?
- It might work but expect things to be broken
* Will you add custom rom support in future?
- I'm a hardcore MIUIer. So no.
* Will you add overclocking?
- I've already unlocked the max available frequencies from caf i.e big - 1.49GHz/little - 1.2GHz. Beyond this I believe it's completely useless on modern chipsets.
* Will you add QC 2/3/4/5/6....∞ support?
- No
* How power efficient is your kernel?
- Just don't expect the battery life of an inverter.
XDA:DevDB Information
Aftershock, Kernel for the Xiaomi Redmi 4X
Contributors
Ashish94
Source Code: https://github.com/AshishM94/Santoni
Kernel Special Features:
Version Information
Status: Beta
Current Beta Version: Rc1
Beta Release Date: 2018-03-09
Created 2018-03-09
Last Updated 2018-03-09
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at yo
*/
Compatibility:
Treble or non-treble AOSP ROM (or aosp based rom)
Lineage OS 14.x (Since 180523)
Lineage OS 15.x (Since 180612)
Lineage OS 16 (Since 190222)
Installation:
Backup your boot partition.
Backup all data and files.
Flash the zip in your recovery.
Reboot then enjoy.
!!!WARNING!!!
Not work on RR and PE!
Just test down on LineageOS and COSP ROM.
Thanks to:
abhishek987
krasCGQ
Features:
NTFS filesystem support.
Chinese UKSM support.
SDFAT.
White light torch.
F2FS support.
SK WAKELOCK V3
Linux 3.18.136
CPU Freq 652-1700MHz.
Very nice battery life.
Force quickcharge support.
SK Security model by SK APT Team (thanks for L0ne1y)
Probably more......
Download:
https://1drv.ms/f/s!AlKTiDTlcvIRhjzyJK-qOpLq9g2h
链接:https://pan.baidu.com/s/102p2lRok00XjR9tyPtTdXQ 密码:5195
Changelog & More description
190222
Linux 3.18.135
190226
Linux 3.18.136
190323
GCam force fix
My blog:
http://www.fou.ink/
Source code:
https://github.com/lianglixin
大佬