Hey I've seen every guide available but when i press power+vol down, it vibrates then I'm pressing vol down and the phone just restarts. Any1 else having this trouble?
powerservice said:
Hey I've seen every guide available but when i press power+vol down, it vibrates then I'm pressing vol down and the phone just restarts. Any1 else having this trouble?
Click to expand...
Click to collapse
i think you are not using the keys correctly. I think after you pressed power key with v down and the phone vibrate,with a fast move press v up once then power then v down.give it a try
Related
Hi all, guys. So, the problem is the following...
I need to hard reset mi topaz, but the VolUP + VolDown + PowerON method doesn't work. The 1234 method can't be performed since I can't access start menu. I didn't try the VolUP + VolDown + RED button when Topaz is turned on.
I think it's strange that method 1 doesn't work. It boots normally, like ignoring I'm pressing the two Volume buttons...
Any suggestion, solution, guys?
Thanks in advance!
The RED button method worked, but It's strange why the VolUP + VolDown + PowerOn method is still not working...
the soft reset and power buttons do the same thing, it just reboots the phone, and while phone starts to boot, before splash screen appears, is when you have to hold the volume keys.
So it would be;
Power on, THEN hold both volume keys immediately before device starts to boot,
or
Hit soft reset, THEN hold both volume keys immediately before device starts to boot
Did you do exactly this?
To perform a Diamond 2 hard reset
1. With the device turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then briefly press the POWER button.
2. Continue pressing the VOLUME UP and VOLUME DOWN buttons until you see this message on the screen:
Bruce Inman said:
Power on, THEN hold both volume keys immediately before device starts to boot
Click to expand...
Click to collapse
This doesn't work. I think you got it mixed up.
ArtieQ wrote the correct way.
No, it works, you just aren't fast enough.
It's just different ways to get to the same place.
The point is, volumes must be pressed as device begins to boot.
I just soft reset and press them and it always works for me.
Bruce Inman said:
No, it works, you just aren't fast enough.
It's just different ways to get to the same place.
The point is, volumes must be pressed as device begins to boot.
I just soft reset and press them and it always works for me.
Click to expand...
Click to collapse
That's right! Thank you Bruce Inman, IT WORKS!
But the ArtieQ method is the one I always used... and the one that usually worked... but anyway, NOW IT WORKS! Thanks Bruce again!
I have a big problem with my i9000.
I installed Launcher Pro from Andriod Market. Then i restart the device.
When its restarting it gets to the unlock screen (drawing).
When i draw the right patron it starting to unlock for a second. (circles turn green)
Then i get a black screen for some seconds. After that i get the unlock screen again...
I tryed to connect the device with my pc, but no result.
Also tryed to reset is. (holding down-button and pressing power on)
Does someone know how to get a real hard-reset or some other solution?
gr
japperr said:
I have a big problem with my i9000.
I installed Launcher Pro from Andriod Market. Then i restart the device.
When its restarting it gets to the unlock screen (drawing).
When i draw the right patron it starting to unlock for a second. (circles turn green)
Then i get a black screen for some seconds. After that i get the unlock screen again...
I tryed to connect the device with my pc, but no result.
Also tryed to reset is. (holding down-button and pressing power on)
Does someone know how to get a real hard-reset or some other solution?
gr
Click to expand...
Click to collapse
The vol-dwn + power combination doesn't work - the real combination is vol-up+ home btn + power button. Should take you to the recovery menu(you move up and down with the vol key and select with the home button).
Toss3 said:
The vol-dwn + power combination doesn't work - the real combination is vol-up+ home btn + power button. Should take you to the recovery menu(you move up and down with the vol key and select with the home button).
Click to expand...
Click to collapse
Yes!! it works. Strange that everywhere i looked i get the wrong button combination.
No i have a nice clean Galaxy S!!!
Thank you.
Phone is super slow and the sound is messed up. I want to switch the phone back to original state with WM installed.
I cannot seem to get the phone back in tri color mode.
Power + Volume brings aMAGLDR V1.13
What am I doing wrong? Is there any other way to force the phone in tri color boot mode?
Thanks,
make sure phone is off then only press volume - button and then press power button.
it sounds like your waiting to long to hold the vol down and power button. you need to do that before the splash screen pops up, if the splash screen shows up its already to late. pull the battery out & then place it back in..hold power for just a split second and then press vol down. im not sure why but this seems to boot a little quicker for me doing it this way then holding power and vol down at the same time from the start.
Still no luck.
Remove the battery.
Press and hold "Vol down" key
Press Power for 2 sec.
Wait for 10 + sec. nothing happens.
Press and hold "Vol down" key
Press Power for 4 sec.
Wait for 10 + sec. nothing happens.
Press and hold "Vol down" key
Press Power for 8 sec.
Wait for 10 + sec. nothing happens.
Phone powers up.
"Stick Tgether"
aMAGLDR V1.13
Build: Feb 1 2011 03:46:07
by Cotulla 2011
Guy....just HOLD VolDown and press SHORT power button.
Are you sure your volume down button works?
It doesn't matter if you short press or long press the power button it works either way the main thing is the phone has to be completely off before first pressing and holding the volume down button and while it is still down press the power button and keep the volume down pressed until bootloader screen appears.
You can also try, with the phone off or on, press the volume down button and then press something into the reset button under the battery door quickly and keep holding the volume down button.
If none of these work let me know exactly what happens after you try these. Where does it go, does it start Android?
Sent from my HD2 using XDA App
It looks like the problem is the volume button.
I let the phone boot normally.
I noticed if I press the volume up button then the animation for vluome come up on the screen but if I press the volume down button animation does not appear.
Therefore, when I hold the volume down and press reset button, phone boots normally. I guess I am out of luck?
I am not sure how to bypass this problem but there have been others with your same problem search the other general forums for volume down button broken or something like that and I am sure there is some way to remap your buttons
Sent from my HD2 using XDA App
I don't think that you can remap it so it works on that early time on bootup.
baboog said:
Phone is super slow and the sound is messed up. I want to switch the phone back to original state with WM installed.
I cannot seem to get the phone back in tri color mode.
Power + Volume brings aMAGLDR V1.13
What am I doing wrong? Is there any other way to force the phone in tri color boot mode?
Thanks,
Click to expand...
Click to collapse
Try to hold down both UP + DOWN vol and then press POWER. Keep on holding it until you see the TRI color screen. This is a hard reset method, hope this works.
Just curious what ROM you currently running on the phone?
when in magldr can you scroll down? if so then the volume down works. magldr wont let you charge the phone in an off state so if you can scroll down. shut off phone or pull battery and wait like 15 seconds, than hold down the volume button than plug the phone in and you should be in tri-color screen if not than you need a new phone. hope this helps a little.
I flashed the 5.0 OTA update, and everything went smoothly. Lollipop is working well, but I was going to flash the incremental updates so I can have 5.0.1.
Everything works until I try the button combo to get recovery to start. I press VOL DOWN + Power, get into fastboot mode, boot into recovery and I can see the Android with red triangle. However, when I press VOL DOWN + VOL UP and then tap the Power button, nothing happens.
Any advice?
It takes a couple times of pressing power volume up
Android The Greek said:
It takes a couple times of pressing power volume up
Click to expand...
Click to collapse
I've tried it multiple times, but the options still don't come up.
EDIT: Nevermind, I had to wait for a couple minutes and then I button mashed it and the options finally came up. Thanks!
I observed the same thing. Its a crapshoot... Looks like a bug in lollipop.
The button combination changed on Lollipop.
Hold the power button 4-5 secs and tap the volume up button.
Hit thanks
Trekker56 said:
The button combination changed on Lollipop.
Hold the power button 4-5 secs and tap the volume up button.
Hit thanks
Click to expand...
Click to collapse
Just rushed in to post the solution - you beat me to it
Happy Christmas, God bless you all.
Trekker56 said:
The button combination changed on Lollipop.
Hold the power button 4-5 secs and tap the volume up button.
Hit thanks
Click to expand...
Click to collapse
is that what it is? I've been holding both power and vol+ for about 5 secs and the menu pops up when i let go. Not that this is useful info, I just need to get some posts.
MERRY CHRISTMAS!
Trekker56 said:
The button combination changed on Lollipop.
Hold the power button 4-5 secs and tap the volume up button.
Hit thanks
Click to expand...
Click to collapse
Wow, lol. Thanks for this!
For KitKat recovery, the button sequence is: hold down UP and then press POWER
For Lollipop recovery, the button sequence is: hold down POWER and then press UP
Something just happened to my phone where the touchscreen actions went a little crazy for a second or two and then the Volume Down and Power button don't seem to work anymore.
The Volume Up button still works though...
Has this happened to anyone else? Is there a way to turn off or reboot the device without using the power button?
Volume down, power and home button. All 3.
Sent from my Star-Tac
Brava27 said:
Volume down, power and home button. All 3.
Sent from my Star-Tac
Click to expand...
Click to collapse
Thank you!
Actually, I found in this case holding down Volume Down and Power caused the phone to reboot. I wonder if something got stuck...
It happened to me as well and I found some article which said to hold power +down button for some time and it will reboot