Related
Found a way to reboot to edl mode from fastboot
All credits to @emuzychenko
1) Download modified fastboot file
2) Reboot your phone to fastboot
3) Double click on edl.cmd
4) You are on 9008/edl mode
5) Flash any fastboot image from Mi flash
You successfully unbricked your device
Hi
Try with that method also. It seams to work .
Next time I brick it again (trust me, it will happen) I will give those a try.
This is the solution www(dot)htcmania.com(/)showthread(dot)php?t=1163463
Cheked by me, the brick was to try to unlock the bootloader without the Xiaomi message.
Sorry for my english, bu ti hope to be helpful.
To restore the default Bootloader copy paste the emmc_appsboot.mbn from Fastboot Rom to the Adb foldee
and type command on cmd
fastboot flash aboot emmc_appsboot.mbn
fastboot flash abootbak emmc_appsboot.mbn
fastboot reboot
For those who have failed and stuck on "HS USB 900E" and the bootloader stick locked here is the solution :
1. Enter fastboot by holding vol down + power
2. Plug your RN3Pro to PC
2. Flash original bootloader from official fastboot firmware
fastboot flash aboot emmc_appsboot.mbn
fastboot flash abootbak emmc_appsboot.mbn
3. Type again :
fastboot reboot
and quickly hold volume up untuk it enter "sideload" mode
4. Install Mi PC Suite from this link en.miui.com/thread-225600-1-1.html
5. Let the Mi PC Suite download the latest chinese firmware, just sit and wait until it done
6. Lets Brick the beast again
parfetto said:
Hi
Try with that method also. It seams to work .
Click to expand...
Click to collapse
this method only works for few very people, everyone cant access adb through recovery.
apixbuanget said:
For those who have failed and stuck on "HS USB 900E" and the bootloader stick locked here is the solution :
1. Enter fastboot by holding vol down + power
2. Plug your RN3Pro to PC
2. Flash original bootloader from official fastboot firmware
fastboot flash aboot emmc_appsboot.mbn
fastboot flash abootbak emmc_appsboot.mbn
3. Type again :
fastboot reboot
and quickly hold volume up untuk it enter "sideload" mode
4. Install Mi PC Suite from this link en.miui.com/thread-225600-1-1.html
5. Let the Mi PC Suite download the latest chinese firmware, just sit and wait until it done
6. Lets Brick the beast again
Click to expand...
Click to collapse
Have you tested this method yourself? I think this is for people who bricked the device but had stock recovery inside, what about people who has twrp and bricked the device? Also I dont think you can flash anything through fastboot in locked bootloader
IT WORKS
apixbuanget said:
For those who have failed and stuck on "HS USB 900E" and the bootloader stick locked here is the solution :
1. Enter fastboot by holding vol down + power
2. Plug your RN3Pro to PC
2. Flash original bootloader from official fastboot firmware
fastboot flash aboot emmc_appsboot.mbn
fastboot flash abootbak emmc_appsboot.mbn
3. Type again :
fastboot reboot
and quickly hold volume up untuk it enter "sideload" mode
4. Install Mi PC Suite from this link en.miui.com/thread-225600-1-1.html
5. Let the Mi PC Suite download the latest chinese firmware, just sit and wait until it done
6. Lets Brick the beast again
Click to expand...
Click to collapse
Worked like a magic. I can confirm for sure. Was stuck at HS USB 900E with locked bootloader.
Rajdip said:
Have you tested this method yourself? I think this is for people who bricked the device but had stock recovery inside, what about people who has twrp and bricked the device? Also I dont think you can flash anything through fastboot in locked bootloader
Click to expand...
Click to collapse
Yeah i bricked mine with twrp .. and i cannot enter into recovery mode now.. only fastboot works and i cannot flash stock recovery too because the bootloader is locked :/ stupid Mi :/
Dharani_V said:
Yeah i bricked mine with twrp .. and i cannot enter into recovery mode now.. only fastboot works and i cannot flash stock recovery too because the bootloader is locked :/ stupid Mi :/
Click to expand...
Click to collapse
So, did you try above mentioned method?
amsmu said:
So, did you try above mentioned method?
Click to expand...
Click to collapse
Yes i did .. and its not allowing me to flash anything .. Getting Error Device is locked :/
failed bro, getting error device is locked using QFIL.:crying:
Guys, please mention the reason behind your device getting bricked too when you are reporting what worked and what didn't. Like whether during unlock bootloader process(without xiaomi's permission) or flashing custom ROM(most probably MIUI official updates) via twrp.
Dharani_V said:
Yes i did .. and its not allowing me to flash anything .. Getting Error Device is locked :/
Click to expand...
Click to collapse
What were you doing when it bricked?
Go to service center. They will repair it
mine happened same..... hard bricked my mobile after restoring original bootloader.......
QFIL cannot do a thing ..... all the eror i get is unable to go to EDl mode......
nothing for me except download mode and fastboot......
so toook to service centre and got it repaired for free in 2hrs
puli where do u live[emoji14]
Sent from my Redmi Note 3 using XDA-Developers mobile app
Rajdip said:
Have you tested this method yourself? I think this is for people who bricked the device but had stock recovery inside, what about people who has twrp and bricked the device? Also I dont think you can flash anything through fastboot in locked bootloader
Click to expand...
Click to collapse
i've tried this myself. In HS USB 900E you can flash aboot through fastboot whether you stock recovery or twrp before bricked.
Rajdip said:
I have found few ways by which people may unbrick from HS USB 900E state without test point, but those guides are for other devices, needs thorough testing for Redmi note 3.
Tools needed:-
1) QPST http://www.androidbrick.com/downloa...qcn-for-lollipop-android-5-0-6-0-marshmallow/
2)Nubia tool studio https://drive.google.com/folderview?id=0BwtoIMKf470SRUxfdHA5cU14ZTQ#
Now follow these guides for reference,
1)http://www.androidbrick.com/ultimat...ide-snapdragons-are-unbrickable-qhsusb_dload/
2)http://www.androidbrick.com/unbrick...-you-have-the-right-kind-of-rom-qhsusb_dload/
Only people with hardbrick(900E) and locked bootloader can this test methods, Please try and leave your feedback, maybe we will find a way to unbrick without opening the phone and voiding warranty. Good Luck
Click to expand...
Click to collapse
Does anyone success ? Please share a guide !
apixbuanget said:
i've tried this myself. In HS USB 900E you can flash aboot through fastboot whether you stock recovery or twrp before bricked.
Click to expand...
Click to collapse
wow!!! thats great, but before you flashed aboot through fastboot did you check whether your bootloader was locked or not?
Hi there, let me explain...
I f*ckup re-installing the latest Oreo stock fastboot image onto my Lineage 16 December firmware, and guess what, without paying attention I choose "Flash all and lock".
So now I am bootlooping, I cannot flash anything (twrp/rom or other) through fastboot.
I can EDL flash, but since December Pie beta brought us rollback protection, flashing the latest stock Oreo fastboot with EDL image won't fix my problem.
I guess my one and only solution is to flash a Pie Fastboot image through edl. I tried with this one (https://www.theandroidsoul.com/how-to-download-mi-a1-android-pie-update/) but unfortunately mi flash tool gives my this error: "programmer file not found", I looked into the " flash_all.bat provided" and everything look fine...
So I am seeking you help. And maybe someone over here might be able to provide me a stock pie fastboot image?
Thanks in advance, cheers
I also faced this problem bro!!!
I enterd in fastboot mode and boot into twrp recovery then flashed only linegeOs 15.1 that means 8.1 then my mobile boots into system ?
i was also searching for pie fastboot image,,, but right now its not availabe,, so can you try this.. i am also using this pie https://forum.xda-developers.com/mi-a1/development/twrp-stock-8-1-0-t3856328
@Manojyaligar @taran181
Thanks for replying, my problem is I cannot flash anything through Fastboot as my phone's bootloader is actually locked.
So the only way I have to flash anything is through EDL, and I don't think that you can boot into TWRP from EDL.
Unipo said:
@[email protected]
Thanks for replying, my problem is I cannot flash anything through Fastboot as my phone's bootloader is actually locked.
So the only way I have to flash anything is through EDL, and I don't think that you can boot into TWRP from EDL.
Click to expand...
Click to collapse
You can try flashing a nougat fastboot image. That might allow you to boot up and enable unlocking the bootloader.
Unipo said:
@Manojyaligar @taran181
Thanks for replying, my problem is I cannot flash anything through Fastboot as my phone's bootloader is actually locked.
So the only way I have to flash anything is through EDL, and I don't think that you can boot into TWRP from EDL.
Click to expand...
Click to collapse
just flash oreo 8.1.1.0 version january patch 2018... you will be able to boot ... there is a chance you will loose imei,, but then flash pie through twrp you will get imei back and phone will be normal
@taran181
Will I be able to flash this ROM despite the anti-rollback protection?
Anyway I am going to give it a shot tomorrow, thank you.
Wow that was something
So tried to follow the guide on "Guides, news and discutions". But end up loosing my imei, and nothing worked I flashed nougat January and Oreo march and november, unable to recover imei.
I had to downgrade to nougat, and write back imei on nvram.
But it's all sorted now :victory:
every time I do the procedure to install the gcam with temporary root, when uninstalling the magisk, my mi a1 gets stuck in the "no command" screen, I saw in several sites that this happens when the magisk does not make a backup correct boot.img, has anyone gone through this?
die.henrique said:
every time I do the procedure to install the gcam with temporary root, when uninstalling the magisk, my mi a1 gets stuck in the "no command" screen, I saw in several sites that this happens when the magisk does not make a backup correct boot.img, has anyone gone through this?
Click to expand...
Click to collapse
Mine too, had to flash the original rom with mi flash. Get the og boot.img then when you're in fastboot mode type : "fastboot boot boot.img" the boot.img needs to be the stock unpatched boot image
emiljano539 said:
Mine too, had to flash the original rom with mi flash. Get the og boot.img then when you're in fastboot mode type : "fastboot boot boot.img" the boot.img needs to be the stock unpatched boot image
Click to expand...
Click to collapse
but will not this reset the device? can I flash the stock boot.img without erasing the data?
die.henrique said:
but will not this reset the device? can I flash the stock boot.img without erasing the data?
Click to expand...
Click to collapse
Yes, but you can keep the data by selecting to flash only the system.
And you can also flash only the stock boot.img with command "fastboot flash boot boot.img"
emiljano539 said:
Yes, but you can keep the data by selecting to flash only the system.
And you can also flash only the stock boot.img with command "fastboot flash boot boot.img"
Click to expand...
Click to collapse
Omg, thanks for the answers, just one more thing, the boot.img do I have to download from the internet or do a backup of my current device?
die.henrique said:
Omg, thanks for the answers, just one more thing, the boot.img do I have to download from the internet or do a backup of my current device?
Click to expand...
Click to collapse
You should download the boot.img for mi a1 which corresponds with your update. For ex. boot.img of january rom.
device not found in adb fasboot after uninstall magisk
emiljano539 said:
Mine too, had to flash the original rom with mi flash. Get the og boot.img then when you're in fastboot mode type : "fastboot boot boot.img" the boot.img needs to be the stock unpatched boot image
Click to expand...
Click to collapse
[HELP] after uninstalling magisk, my mi a2 stuck at no command and does not found in adb (device not listed in fastboot). what should i do? i want to flashboot.
caan90 said:
[HELP] after uninstalling magisk, my mi a2 stuck at no command and does not found in adb (device not listed in fastboot). what should i do? i want to flashboot.
Click to expand...
Click to collapse
Because you have lost the stock boot.img. find the stock boot img of your patch then flash it via fastboot directly
emiljano539 said:
Because you have lost the stock boot.img. find the stock boot img of your patch then flash it via fastboot directly
Click to expand...
Click to collapse
Thank you so much... it work.. my mi a2 just come back to life..
caan90 said:
Thank you so much... it work.. my mi a2 just come back to life..
Click to expand...
Click to collapse
I'm glad it worked. Make sure you leave a like in my comment if it was useful . Peace
my mi a2 is not detect in adb and in fastboot too what can i do
Hi so I been seeing many people getting stuck on fastboot after flashing ROM so here is the method u can use if u can't boot to TWRP also.
I have tired on PA ROM and it works so idk about others ROMs ..
fastboot flash dtbo dtbo.img
fastboot flash logo logo.img
fastboot flash vbmeta vbmeta.img
fastboot flash boot boot.img
fastboot flash misc misc.img (u can get on fastboot rom not .zip)
fastboot flash recovery recovery.img (recommend used twrp-3.3.1-2-davinci-fix).. Russian one
And after those comands do run TWRP auto installer.
U can find those files from fastboot stock ROM. This will save ur data and u won't needed to flash Stock ROM ..
Hope I explained everything if anything else needed comment down below.
Hi, i'm stuck in this fastboot limbo but can't find some of these files you mentioned: logo.img and misc.img
Where do i get them?
edit: nevermind, solved flashing fastboot miui with miflash pro.
EDIT 2: after flashing a rom i get stuck in fastboot everytime. How to avoid this?
Also tried flashing those files in that exact sequence but still stuck in fastboot.
My persist.img is shown not writable in cmd if I try to flash it. If I flash a rom using TWRP an error pops up saying "failed to mount /persist' (Invalid Argument).
SOLVED- Flashing persist.img from twrp "Install Image" works.
farhan20 said:
Hi so I been seeing many people getting stuck on fastboot after flashing ROM so here is the method u can use if u can't boot to TWRP also.
I have tired on PA ROM and it works so idk about others ROMs ..
fastboot flash dtbo dtbo.img
fastboot flash logo logo.img
fastboot flash vbmeta vbmeta.img
fastboot flash boot boot.img
fastboot flash misc misc.img (u can get on fastboot rom not .zip)
fastboot flash recovery recovery.img (recommend used twrp-3.3.1-2-davinci-fix).. Russian one
And after those comands do run TWRP auto installer.
U can find those files from fastboot stock ROM. This will save ur data and u won't needed to flash Stock ROM ..
Hope I explained everything if anything else needed comment down below.
Click to expand...
Click to collapse
Could you (or anyone) please provide these files.
Reep1324 said:
Could you (or anyone) please provide these files.
Click to expand...
Click to collapse
Hi, this u can get from fastboot stock Rom, download fastboot stock Rom and extract them u will find.. if need help just tag me ..
farhan20 said:
Hi, this u can get from fastboot stock Rom, download fastboot stock Rom and extract them u will find.. if need help just tag me ..
Click to expand...
Click to collapse
i got the .img file but i cant install it via twrp or fastboot cause this partition is unmountable
do you have any idea? i flashed stock rom via fastboot but the error insists
Dr.Dinel said:
i got the .img file but i cant install it via twrp or fastboot cause this partition is unmountable
do you have any idea? i flashed stock rom via fastboot but the error insists
Click to expand...
Click to collapse
Hello, seems u need to repair ur partition from TWRP.
Also what u did that cause this ?
PS: I'm not expert or anything but I will try to help if I could.
farhan20 said:
Hello, seems u need to repair ur partition from TWRP.
Also what u did that cause this ?
PS: I'm not expert or anything but I will try to help if I could.
Click to expand...
Click to collapse
thanks for replying
i finally solved it, used a chinese twrp that has the option to install on persist partition and the rest was easy
My k20 bricked after install miui 11 Chine version i try to flashing with flash tool but after processing not working "error antirolback check error" please someone help me
hamidezat20 said:
My k20 bricked after install miui 11 Chine version i try to flashing with flash tool but after processing not working "error antirolback check error" please someone help me
Click to expand...
Click to collapse
Hi, please follow this setups and it should be fine .
If you run into errors flashing fastboot images to your device, edit the .bat files that came with it. Usually you want to edit "flash_all.bat"
For "Missmatching image and device":
Remove the lines highlighted in the screenshot from the file, save and try flashing it again.
For Antirollback Error:
Remove ALL lines ABOVE the highlighted lines in the screenshot from the file, save and try flashing it again.
Always make sure that you got the right image for your device. Removing check lines from these files can permanently brick your device if you use the wrong fastboot image.
farhan20 said:
Hi, please follow this setups and it should be fine .
If you run into errors flashing fastboot images to your device, edit the .bat files that came with it. Usually you want to edit "flash_all.bat"
For "Missmatching image and device":
Remove the lines highlighted in the screenshot from the file, save and try flashing it again.
For Antirollback Error:
Remove ALL lines ABOVE the highlighted lines in the screenshot from the file, save and try flashing it again.
Always make sure that you got the right image for your device. Removing check lines from these files can permanently brick your device if you use the wrong fastboot image.
Click to expand...
Click to collapse
like me please help me after installing miui 11 Chine version
hamidezat20 said:
like me please help me after installing miui 11 Chine version
Click to expand...
Click to collapse
U r stuck on fastboot right and u said u can't flash fastboot rom because u r getting anti roll back error so I gave u solution
How to fix this problem
Hello same me how to fixed step by step
First you need fastboot rom extract fastboot rom on your pc after extract find 3 file
1-boot
2-recovery
3-system
Flash with fastboot
Turn off your phone and going to fastboot
Type
Fastboot devices
Fastboot flash boot boot.img
Fastboot flash recovery recovery.img
Fastboot flash system system.img
Done device can't boot but you can install twrp China version link ?
https://www.lanzous.com/i6ahykh
after installation you can go to twrp
Download fastboot miui install from twrp
Sorry for me English
Oh my god, you saved me!
HI guys i flashed my mi 9t with twrp-3.3.1-2-davinci-fix it worked with miui.eu 9.8.15 after trying to flash miui 11 for about 6 hrs lol, anyway my phone is working but i would like to go back to stock and relock the bootloader but i cant find the mi 9t fastboot rom
timbook2 said:
HI guys i flashed my mi 9t with twrp-3.3.1-2-davinci-fix it worked with miui.eu 9.8.15 after trying to flash miui 11 for about 6 hrs lol, anyway my phone is working but i would like to go back to stock and relock the bootloader but i cant find the mi 9t fastboot rom
Click to expand...
Click to collapse
You're able to flash miui 11 after such long time or just 9.8.15?
farhan20 said:
Hi, please follow this setups and it should be fine .
If you run into errors flashing fastboot images to your device, edit the .bat files that came with it. Usually you want to edit "flash_all.bat"
For "Missmatching image and device":
Remove the lines highlighted in the screenshot from the file, save and try flashing it again.
For Antirollback Error:
Remove ALL lines ABOVE the highlighted lines in the screenshot from the file, save and try flashing it again.
Always make sure that you got the right image for your device. Removing check lines from these files can permanently brick your device if you use the wrong fastboot image.
Click to expand...
Click to collapse
hey i am getting file missmatching image and device error so i deleted those lines from .bat file but still getting the same error
lucifer said:
hey i am getting file missmatching image and device error so i deleted those lines from .bat file but still getting the same error
Click to expand...
Click to collapse
Hi, u deleted from flash all. Bat right and what's the error u r getting?
farhan20 said:
Hi, u deleted from flash all. Bat right and what's the error u r getting?
Click to expand...
Click to collapse
well it worked after i moved the file to c:/ drive but after flashing i lost widewine L1
When I got 9.8.15 working I stopped at least I got a working phone now, I will try and flash stock later.
I got anti rollback error trying to flash stock with miflash tool.
Hello,
I want to install the twrp-3.3.1-12-davinci-mauronofrio.img with modified_vbmeta.img. I have installed MIUI Global 11.0.4!
It´s not working, I get always a bootloop
why it´s not working?? Need help, thanks
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot flash recovery twrp.img
Works for me every time. Verity breaks your boot for security reasons, so it needs disabled.
xer0o0x said:
Hello,
I want to install the twrp-3.3.1-12-davinci-mauronofrio.img with modified_vbmeta.img. I have installed MIUI Global 11.0.4!
It´s not working, I get always a bootloop
why it´s not working?? Need help, thanks
Click to expand...
Click to collapse
Or just use the official TWRP.
No need to modify anything:
https://eu.dl.twrp.me/davinci/