I updated my T95Z Plus Android12.0 TV Box H618 to the latest firmware. But, the device was erased and set to factory settings. Will this happen every time the device is updated?
Related
I successfully rooted using teletype's guide Shield Android TV rooted from this forum, combined with Tutorial: Root Shield Android TV 500GB (Marshmallow) from the Nvidia Shield Zone website. I think the main reason I had to borrow from the latter was that I could not get a cursor to load on the screen in TWRP using the file in the first guide, despite trying 4 different types of mice. Also, there was something in it about drivers which helped I think.
I was able to use Market Helper fine a few days ago but when I tried last night it told me it could not activate as the device was not rooted.
Did this happen because of an update and is there anyway to avoid this happening in the future while still receiving updates?
Can I re-root without having to reconnect my laptop up again?
Installed 5.0 update to my Shield Tv 16 & now my box loose network about every 5 mins
I came home from a trip and my shield tv tells me I can now install the 5.0 experience. So I get all happy and install it. But now I cant seem to keep it connect via Ethernet very long. It works if i reboot the box. But it does not last and then what ever im doing says i've lost the internet connection. I reboot and its back again for a while. Anyone else having this problem ?
Had exacttly the same behaivior. I tought this must be a faulthy Update process and I treid to flash recovery. Now I'm stuck there and nothing boots.
https://forum.xda-developers.com/sh...ng-anymore-t3546666/post70773145#post70773145
Please could someone help us.
Do you got any news here? I got my shield replaced and the new/refurbished one has exacttly the same problem.
Hi.
Short history. I tried to flash an update on my MXQ-4K, It failed and now it's bricked. I can enter the Maskrom Mode and flash a New rom but none of the ones that I found worked. Some ROMs just doesn't boot and others stay frozen with a bugged screen. The only firmware that worked and booted os not for the MXQ-4K, is for MK809IV so the Wi-Fi and the remote Control doesn't work. What can I do? Anyone have a real stock firmware for this?
MXk-4k have so many different fake variations, so the best way is to open the housing and check which wifi chip this device used. And then find firmware for this chip + your SoC and 90% even RC will work with it
I. order a amlogic it was a RK322A version Android 6.1.1 ARM
everything works KingRoot , Netflix , Kodi etc........ (for my kids)
now I,m waiting for my X96 Mini 2g ram 16gb flash 2ghz Amlogic s905w 64bit
Thought i'd post my experience after a few days of pain in order that it might help someone else. XDA forum was complex in info but couldn't have been more valuable. I'll reference helpful posts below.
Car:Kia Sorento 2010
Head Unit: Pumpkin Android CN10
Android version: 6.01
Processor: quadcore-R16
Model / SKU: CN10-02201b-02A
Model is no longer available on amazon.
After a few weeks of use all the apps stopped launching and just returned to the home screen. Radio (UK) was dropping out every 30 seconds. The time never stayed set and changing it seems to have a bug that affects the system. Thats as much as I got from pumpkin forums. The weird thing was that there was no MCU info on the about screen.
So contacted Pumpkin who provided firmware updates. I would have thought it possible for manufacturers to track products, hardware and firmwares in a version control system but they insist on email 1-1 with firmware upgrades as solutions- but that's another story.
First round of firmware seemed to have bricked it - it was stuck in a boot loop or not booting at all. 3-4 firmware updates via some frosty email exchanges and its still stuck on boot with android logo.
Thats taken 7 days. Ouch
Then managed to find this thread https://forum.xda-developers.com/android-auto/android-head-units/allwinner-r16-astard7-android-6-0-1-t3523906
Since it mentioned the 'Allwinner quad core R16' i assumed it was relevant to this unit due to the chip info above. Since the unit was going back for a refund i didn't worry too much about screwing it up further.
So i took the rar file link from here:
KED1 (MEDEKE?) firmware (thanks):
V7.3.1_20170720.152039_KED1
"V7.3.2_20170826.102252_KED1.rar"
unpacked it on to sdcard:
81cb828c-9b57-11e6-ad2a-df6786178d62
827ba428-9b57-11e6-8dfb-37398ea70e52.0
827ba428-9b57-11e6-8dfb-37398ea70e52.1
827ba428-9b57-11e6-8dfb-37398ea70e52.2
Instead of doing what pumpkin said installing one file at a time on sdcard i put them all on root of card altogether and ran the upgrade. To my surprise everything installed OK. Rebooted and its working.
I'm pretty sure Pumpkin have no idea what they are doing with firmware as their forum seems littered with apologies for wrong firmware. Maybe they do . Luckily i have flashed a few roms and persevered with some success. The interface is different from factory settings but I now have a fully functioning radio , bluetooth, and installable sat nav app (map.me).
Some questions lingering in my mind.
1. Is this a eonon base unit?
2. Is there any core factory reset available?
3. Should i try and update the MCU to a newer version as listed in the post above?
4. How can I make a back up of my working settings?
5. Can i get any other GUI updates?
Hope this helps someone else with a CN10 R16 unit
Thanks for all the hardwork mods and devs do thru this forum too.
I tried flashing my Onn Anroid TV Box with this update https://developer.android.com/tv/release/12 and now it is bricked solid. Someone please make a specific ONN (Or Google TV) version on the release 12.