Hey guys.
Anybody else struggling with their headphones volume not being loud enough? I have a pair of jabra headphones (elite 7) that worked great until i had to start cranking the volume to the MAX on android and the sound doesn't feel loud enough. They work as intended on the computer.
How could i diagnose the issue? Haven't installed anything that might be conflicting, i think. I tried volume boosters but none worked. I tried using VLC and testing the preamp to the max, but it just distorts the sound and there's no boost. Using the internal Dolby atmos sound EQ and boosting everything to the max, does make it better but does not fix the problem.
I am on Android 11, phone is not rooted, nor it has magisk. I ran a few searches but can't seem to find anything of help. Any tips would be appreciated.
Related
I am having issues with volume through the bluetooth audio. I am unable to find a mp3 player that has a preamp included in the equalizer. Is that not possible through android??? This is my first Android phone.
Is there a hack to boost volume?? Or is there a player that boosts volume??
I have to fix this fast...I work in a factory and need to hear my jamz
There's not a hack for it yet.
anyone know of a player with a preamp??
I was thinking the same thing, the volume is very low when playing music. I've tried with both my Bose In-Ear and Klipsch S4 headphones; both were barely audible above a lawn mower.
I agree volume is low,....waiting on an app, hack,...something.
so has there been any advances in volume boosting???
my main concern is my bluetooth volume...i need an mp3 player with a preamp or something that actually boosts system volume...
anyone????
I commited my volume hack to my github about a week ago, toast pulled it so now any kernel using ToastCFH's source will also have my audioboost code in it.
It in theory should boost the output volume of every interface on the device, but the only two that I've noticed to show a real increase are the phone headset (in call one) and the Bluetooth line out.
I don't know what kernels use it ATM but I know the FPS fix for Novatec panels implements it, just look around, most probably have it by this point since it seems like everyone is using toast's source.
Its not all BT that is quiet though. The Jawbone Icon is pretty quiet, as was the Blueant T1. BT audio through the LiquidAux is ok but not super loud. But the Moto H17txt is, well, louder than hell! Have to turn phone bt vol almost all the way down. 4 diff devices, 3 volume levels...
My concern is just with audio out through wired stereo headphones. I consider myself a self made audiofile and the dynamic quality of the audio output of the EVO is lacking IMO.
One way to go (audiophile quality, but pricey) is the Headroom total airhead. $99.
Runs on 4AA's and is 1/8" in and out.
You can find the older versions for less on e-bay.
I've got a headbanger amp, same basic thing as the Headroom.
Link also has some cheaper options like the boostaroo.
If you are DIY, there's instructions to be found to build the headbanger too.
JAson
Edit: Still can't post links so just google headphone amp and you'll be heading in the right direction.
Just an idea, google search "mp3 gain" this will normalize youre mp3s but you can also boost the volume by using a higher gain level when you normalize. This will clip the mp3 but i just kept a copy of the original file. I set mine to 110 percent then applied. Worked great.
Sent from my PC36100 using XDA App
Hi all, I was wondering if anyone knows of a way to boost bluetooth playback volume. I have beats wireless studio headphones and they are definitely not as loud as they were when using them with my g3 on CM12. I do remember them being this low on the stock lg rom but when I switched over to CM the sound drastically increased. I am looking for a no root solution if possible as I am stock for the time being. I can't even feel any bass from these things and that's what they are supposed to be for lol. Any help is appreciated, thank you!
Interesting. CM12 killed my BT volume on my HAM2. I find BT audio to be just as loud as other devices I have. One thing I've noticed is that BT max volume seems louder if I make sure volume is maxed out before pairing, especially on devices that take over phone volume controls.
Unpair the headphones. Turn phone volume to maximum. Turn headphones volume to maximum. Then pair.
I'm interested as well the mixer_paths would be where we need to look but they look different than I've seen before. I've found a mod from 2014 I'll report back.
http://forum.xda-developers.com/showthread.php?t=2799537
Has someone sorted out the bt volume? I also have a very low volume over the bluetooth music, as I'm using it in the car...
It also depends on the headphone I have different Bluetooth headphones and some are loud and some are not.
Well it's not headphone previous nexus 5x was fine, if there is a way to increase bt volume
Viper4arise solved the problem, however 7.1.2 also make the bt volume normal, problem fixed
Just is someone have the samr issue
The P9 is also a little less loud on BT than any other phone i had.
Hi All,
Just wanted to share my experience with Viper. I tried A.R.I.S.E on supermanRom 2.4 and found samsung adapt sound to be much cleaner and superior to VIPER on my sennheiser earphones. All Viper did was just amp the sound with the AGC turned on and make it sound like i am inside a boombox. I tried turning off the AGC, still i feel samsung adapt sound to be more punchy and cleaner. What is your experience? I've read all this hype on Viper, but all to realize its just a hype.
You results will vary based on what settings you use, choosing too many may lead to overprocecing. You may want to look at profiles for viper. For me a.r.i.s.e deuteronomy 2.4 works great. Also, did you try any other options, agc is meant to amp the sound.
coolbuy said:
Hi All,
Just wanted to share my experience with Viper. I tried A.R.I.S.E on supermanRom 2.4 and found samsung adapt sound to be much cleaner and superior to VIPER on my sennheiser earphones. All Viper did was just amp the sound with the AGC turned on and make it sound like i am inside a boombox. I tried turning off the AGC, still i feel samsung adapt sound to be more punchy and cleaner. What is your experience? I've read all this hype on Viper, but all to realize its just a hype.
Click to expand...
Click to collapse
I don't necessarily disagree with you. I think it depends on the headphones being used. Personally I find I get the best sound with viper and a custom IRS. The best sound I ever got out of the aux port on a Samsung phone with the Wolfson chip requires faux sound; I find it is the only way to increase the gain without crackling. Realistically I would be fine without any audio modifications if I could increase the gain through faux sound.
donkeykongking said:
I don't necessarily disagree with you. I think it depends on the headphones being used. Personally I find I get the best sound with viper and a custom IRS. The best sound I ever got out of the aux port on a Samsung phone with the Wolfson chip requires faux sound; I find it is the only way to increase the gain without crackling. Realistically I would be fine without any audio modifications if I could increase the gain through faux sound.
Click to expand...
Click to collapse
Surely using the volume mod is enough?
I found a lot of sound mods simply raised the noise floor of my headphones and increased background hiss regardless. Ears got used to it after a while but I am happy using my RHA MA 750i and M50x without Viper or ARISE. I hear no additional noise when using the sound mod that increases volume from the headphone jack.
Galactus said:
Surely using the volume mod is enough?
I found a lot of sound mods simply raised the noise floor of my headphones and increased background hiss regardless. Ears got used to it after a while but I am happy using my RHA MA 750i and M50x without Viper or ARISE. I hear no additional noise when using the sound mod that increases volume from the headphone jack.
Click to expand...
Click to collapse
It's not that the volume mod is "enough". I always found that volume mods which modify the mixer values push the gain to a point that causes it to crackle at certain decible levels. Whenever I modified the EQ after boosting the volume with faux sound I could get clear bass and treble at high volumes without a crackling sound. Is it because faux sound worked at a kernel level? Therefore actually boosting the amount of power outputted through the headphone jack, whereas mixer value changes attempted to reach a certain decibel level with stock power output?
I would like to add that I am not unappreciative of all the work developers have put into audio development for our phone. Without Zubi's sound mod the audio on the s7 edge would be pathetic IMO.
donkeykongking said:
It's not that the volume mod is "enough". I always found that volume mods which modify the mixer values push the gain to a point that causes it to crackle at certain decible levels. Whenever I modified the EQ after boosting the volume with faux sound I could get clear bass and treble at high volumes without a crackling sound. Is it because faux sound worked at a kernel level? Therefore actually boosting the amount of power outputted through the headphone jack, whereas mixer value changes attempted to reach a certain decibel level with stock power output?
I would like to add that I am not unappreciative of all the work developers have put into audio development for our phone. Without Zubi's sound mod the audio on the s7 edge would be pathetic IMO.
Click to expand...
Click to collapse
It is possible that it is due to the kernel, but with zubi's sound mod I get no noticeable distortion on bass or crackling highs, even on my modded Piston 2 that is very sibilant. Volume levels are also way above what I would need, so I am just a bit surprised that you have to crank the volume up so much that EQ boosts are actually causing this. Power hungry cans, I can imagine causing this but if you are talking about IEMS then yeah I am surprised lol
I use one of the DFX-Hiphop-modern with the AudioPhile4 pofile, and both the sound in my car and in mu headphones are insane!
My car has Bowers & Wilkins with 27 speakers. It plays like hell has burnt over with my S7 and Bluetooth connection
Yes the stock ROM sound is punchier and cleaner than what viper has to offer.. I removed viper after thorough testing..
Hello all ZF3 owners,
I own ze520kl model and It is just me or sound is terrible after updating to Android 7? I have (almost) no bass sounds, anyone else feels this kind of difference? Equalizer makes a little of difference, but not like previously did on Android 6.0.
2 different set of headphones and 2 different player apps.
Regards,
Dan.
Others reported the same.
Looks like I have to hold on to update my phone.
The Android N update for the Zenfone 3 enables AudioWizard audio processing with wired headphones, meaning that any EQ you have on your phone's speakers will carry over to the headphones. There also may be a bug that activates certain AudioWizard presets on headphones without warning. Either way, you can fix the problem of headphone audio sounding tinny or weird by going into the Sound and Vibration settings menu while your headphones are plugged in, and selecting AudioWizard. Once in AudioWizard, set the preferences to your liking or just select Pure mode if you don't want any EQ or anything like that.
Big thanks, it worked like a charm!
Regards!
sensi277 said:
The Android N update for the Zenfone 3 enables AudioWizard audio processing with wired headphones, meaning that any EQ you have on your phone's speakers will carry over to the headphones. There also may be a bug that activates certain AudioWizard presets on headphones without warning. Either way, you can fix the problem of headphone audio sounding tinny or weird by going into the Sound and Vibration settings menu while your headphones are plugged in, and selecting AudioWizard. Once in AudioWizard, set the preferences to your liking or just select Pure mode if you don't want any EQ or anything like that.
Click to expand...
Click to collapse
Will try that settings. Thanks for the advice. :good::good::good:
Sorry for reviving this old thread. I updated to Nougat the day I got this phone and learned that audio quality is worse than my last phone, even with AudioWizard set to Pure. Will audio sound better with the AudioWizard app and service disabled?
http://imgur.com/a/XtSMR
I also found two audio packages, "com.asus.maxxaudio" and "com.asus.maxxaudiowizard" which I can't disable via ADB because I'm not rooted.
X727 on stock 21s. In call speaker volume is low. Noticed that even when it's on speaker, the built in headphone is actually working and it is louder than the two speakers combined. I find the volume levels to be just fine when playing music or video, only have problems in calls. Dolby Atmos is on. Any ideas?
nwaves said:
X727 on stock 21s. In call speaker volume is low. Noticed that even when it's on speaker, the built in headphone is actually working and it is louder than the two speakers combined. I find the volume levels to be just fine when playing music or video, only have problems in calls. Dolby Atmos is on. Any ideas?
Click to expand...
Click to collapse
Seems to be a problem across multiple roms including the custom ones...I've tried both dolby atmos and viper4android....they don't really seem to do alot for it...the old hacks to the mixer_paths.xml don't really match the micer_paths_tasha.xml file we have in /system/etc. It's really sad I have to enable speakerphone just go get decent volume from the earpiece.