Hi folks,
I'm aware of the registry hack to change the RingTone settings (such as vibrate length, etc), but can this be done for the notification alert? When I get a notification the phone just vibrates for too long.
Any help appreciated.
PaulB
Hi,
Any help on this would be most appreciated, as the vibrate just goes on too long, and not only annoys me but everyone in my (quiet) office!
You can set the vibrate length in seconds for RingTone0 in the registry so there must be an equivalent for the notification alert?
PaulB
i second this request, the whole scripting thing for ringtone0 is simple but bizarre especially as there seems to be no equivalent settings for text/email notifications. There must be a way!
Change duration of notification vibration (hey I'm a poet!)
Sorry to bump this again, but as some time has passed I wondered if anyone had managed to find the reg settings for the notification alert?
I really need to shorten the vibration duration for notifications.
I second this, the message alert is way to long. Hope someone have a sollution to this.
Jarle
Fix for long vibration
I recently switched from the Sidekick 3 (I had the sidekick 1, sidekick 1 color, and sidekick 2 as well) to the 8525/TyTN and immediately found this vibration issue described above extremely annoying. The sidekick uses the sound file normally played to generate the vibration pattern, meaning if the sound file has two large amplitude alerts 1 second apart, if the phone is in vibrate mode, it would vibrate twice, with a 1 second spacing.... along with "the beat" of the audio.
Anyways, I discovered today that Windows Mobile does this as well to some extent. If the phone is set to vibrate mode, then it seems that all notifications vibrate as the long, 5 second or so, vibrate that you're all familiar with. HOWEVER, if the notification is set to vibrate and sound acoustically, it vibrates for the duration of the sound file. Strangely, this does not work when the phone is set to only vibrate. To get around this, what you need to do is set your notification (text message, e-mail, whatever) to both play a short sound and vibrate, then set your phone's audio to be on, but then turn the volume all the way down. In this setting, the phone does not play a sound, but does vibrate according to the length of the audio file.
I haven't tested this extensively, but it seems to work so far. This actually was one of my biggest complaints about the phone and i'm very glad i've found a simple work-around.
Let me know your experiences and/or if it doesn't work for you,
Todd
quite a great idea there, but was hoping someone has figured out a better solution?
what about going one step further with this and make a short wav file of pulsed noise, but at 20kHz. you won't here it!
All,
I have just joined this board searching for a solution to EXACTLY this problem. What is required please is a registry tweak that shortens the vibration alert for text messages, etc, when the phone is set ot vibrate only.
The ringtone fix to shorten the vibration alert works when a call comes in but NOT when a message comes in.
Any help on this would be very much appreciated.
Thanks
WB
Oh wow. I have the same annoyance with my phone. You send a text on vibrate and it goes nuts for an hour! Not really that long, but for just a text message notification it should be a little 1 second bitz.
This long vibration is really bad when you are in class and it goes for so long. My phone hits right against those plastic chairs through my pocket and resonates though out the whole room.
Unfortunately the Notification registry entries don't have a script option.
If you go into
HKEY_CURRENT_USER\ControlPanel\Notifications
the Default String tells you what the each directory is for.
The other keys are
AvailableOptions - What options you can pick from in the Sound/Notifactions screen in settings,
Duration - the length of time the light flashes (5,10,15,20,30,45,60min, 0=no limit)
Options - what sort of notifications you want
1=play sound
2=vibrate
3=play sound, vibrate
4=flash light
5=play sound, flash light
6=flash light, vibrate
7=play sound, flash for, vibrate
8=nothing
9=play sound, display message
10=nothing (can only pick play sound and vibrate)
11=play sound, display message, vibrate
12=Display message, Flash light
13=play sound, display message, flash light
14=display message, flash light, vibrate
15=play sound, display message, flash light, vibrate
senergy said:
Unfortunately the Notification registry entries don't have a script option.
Click to expand...
Click to collapse
So what you are saying is there is no way of making the vibration shorter? No way at all? Could you add an option for time? Is there some program?
Senergy,
Many thanks for your response. Disappointing news as this is a serious nuisance.
I have lost count of the number of times I have been in meetings where the phone has gone off in vibrate mode only for the whole world to know I have had a message. Many a time I simply turn all alerts off which defeats the objective of having a discrete vibrate system.
I rang HTC's support team in the UK and got nowhere.
I wonder if a written query into them might get a more productive response?
WB
Anyone heard of any solutions yet? I've been searching google, forums, etc for days with no luck yet.
DRChrysler,
No but see thread link below. Shantz may yet be able to help us out here.
Cheers
WB
http://forum.xda-developers.com/showthread.php?t=311838
I had the same issue when I had a Tytn II last year.
My issue is that when the phone rings while in normal mode, it is one constant vibration, which I dont like.
Also when i receive a text message in normal mode, the vibration is constant and lasts for about 4 seconds.
BUT
when the phone is in vibrate mode, the vibration for calls is a on/off vibration which I like, and for texts is 3 sharp vibrations which is a lot more useful in distinguishing whether it is a phone call or text that i am receiving when the phone is in my pocket.
Is there anything I can do to make the HD behave the way it does in vibrate mode for all calls?
There must be some sort of registry setting that can be tweaked.
Thanks in advance for any replies..
anyone?
Try this, It could be what your looking for.
http://forum.xda-developers.com/showthread.php?t=437279&highlight=Valert
Would also be interested.
i remember back in the day, my Nokia 6310i (yeah not even color phone) would vibrate to the ring tone.
valert is cool, but on the HD has a bug that disables volume keys
I've installed VAlert but cant find it anywhere?
Try the attached utility. It's conf is under system settings.
nezz, the app has cyrillic interface: any chance to have it in latin (or at least a translation of what the 3 checkboxes mean?)
thanks
Is there a reg tweak for this? When you turn the phone on it does 2 short vibrations. i would like to use this as the sms vibrate alert. Is that possible?
Thanks!
hey guys,
a few little annoyances that might be a quick fix: i'd like an option to specify whether or not the "Sound Off" slider on the lock screen goes to silent mode or vibrate mode. (one option turns off all sound, but turns on vibrate, the other option turns off sound and vibrate).
also, i think it's absurd that android's silent mode still allows media volume to come out of the speaker. i think silent mode should turn off the speaker, and only allow audio if headphones are plugged in, but i can see this being a much more involved and intricate change than the previous request. can anyone look into this?
I don't think this is going to happen.
i agree this is a very annoying "feature".. in every other phone silent mode means, vibrate when someone calls usually.
its very rare for me to want to disable notifcations of calls completly (i would rather just shutdown the phone?)
i never actually modded or even compiled android sources but i am a programmer by profession and it seems like a simple patch..
This really pisses me off that silent mode is actually won't ring but will bleep and wizz at every email and text. Silent should be silent.
hi all. I ask you a question, I wanted to know if you too the vibration of haptic feedback has a resonance noise
trxjam said:
hi all. I ask you a question, I wanted to know if you too the vibration of haptic feedback has a resonance noise
Click to expand...
Click to collapse
I know exactly what you mean, we all have the resonance sound from the vibration motor.
It was part of the reason why I chose to return my OnePlus 6 back in May, I couldn't get used to it.
Now I have a OnePlus 6T McLaren and although it has a bit less resonance sound than the old OnePlus 6, it's not perfect.
And I have compared with my friends who have a 6T, and they all sound the same.
Now you know
I think it all started with op5t. I switched from open back then... and noticed that nasty sound.
My gf keeps waking up when I try to type smthng in bed
geminium said:
I think it all started with op5t. I switched from open back then... and noticed that nasty sound.
My gf keeps waking up when I try to type smthng in bed
Click to expand...
Click to collapse
If you are talking about the sound/vibration I think you are, it goes away when you turn off Touch Vibration in the Vibration section within the Sounds settings. Or is it something else you are referring to?
I have a strange issue.
Firstly i turned off all system sound, the lockscreen sounds is OFF!!
But i always hear a clicking sound when i unlock the device. Than I thought maybe it is the NFC sound. I turned off, but no change!
Of course If the change the phone profil to the vibration the sound is disappear. maybe it is a bug or feature?
I have IN2020 with 10.5.12.IN11DA rom.
Bug report to OP? However it's really strange since I have no unlock sound with media sound fairly high. Which version are you on? Sure it's not the sound of the vibration motor which actually sounds like a deep "click" on this device.
Are you using any app that generates a lock screen overlay? Maybe to display more information or something like that?
Check Settings-System Sounds-Screen Locking Sounds?
I am not stupid, i have been two different sound after unlocking. The first was disabled, the second remained.
I have made a small progression.
If I turned off the media sound in the volume panel, the clicking sound is disappeared. Of couse i turned the sound on it will be reappear.
ANY IDEAS???SOMEBODY????