Hi
I have installed Lineage on my device and has been using it for years. Lately only in airplane mode as back up phone for my Healy device. After few days of not using it I turned it on and it keeps on restarting. It fully boots and then restarts. I am able to start fastboot but I cannot see the mobile on my Windows 11 computer. I am able to see my Samsung mobile. I have never connected Xiaomi on this computer. I have not updated Lineage for years.
Would you have any suggestions what to do to be able to use the mobile again?
Thank you
Radek
Hope it helps.
https://forum.xda-developers.com/t/bootloop-on-mi4w.3558835/
Related
Upon returning home from work a week ago, my Omnia 7 would not switch on. The only way it shows that it is still alive is that I can boot into Download mode. The phone was running a 7720 build of WP7 which I had installed a few days prior.
I thought I would try flashing another rom, however in WP7 Downloader ver 7.03, my phone is not found. When booting into Download mode and connected to my computer, an error message appears saying 'USB Device not Recognised'.
I also should probably mention that I can only boot into download mode when the phone is plugged into the computer with the battery taken out. With the battery in, nothing happens.
Could this be an issue with the software I have installed, or is it more likely that it is a battery fault?
Thanks in advance
My phone is currently on Oxygen OS 3.5.6. OnePlus two is not recognising or no pop-ups after plug into laptops. While plugging phone is showing charging..... There is no pop-ups to select mode for transfering files. Does anyone help to fix this issue..... Currently phone is having locked bootloader with oxygen OS recovery.... I had flashed the oxygen OS again and again but failed to fix it. Please help me to fix this.....
Change your cable
chandhulal.mr said:
My phone is currently on Oxygen OS 3.5.6. OnePlus two is not recognising or no pop-ups after plug into laptops. While plugging phone is showing charging..... There is no pop-ups to select mode for transfering files. Does anyone help to fix this issue..... Currently phone is having locked bootloader with oxygen OS recovery.... I had flashed the oxygen OS again and again but failed to fix it. Please help me to fix this.....
Click to expand...
Click to collapse
I got the same problem, my laptop did not recognize my OP2, i have to manually change the driver of my USB port and it worked.
It happens on each OS rev. I have to manually change from MPT to "charging" and back. each time...Cable is irrelevant.
This actually a reason for "no-go" with any of OPO again. Will not take a risk.
Hi all,
My nexus 6p is not recognized by any PC since I flashed Resurrection Remix 6.1.0 [8.1.0_r33 Oreo] 5 months ago. I have been busy and never bothered about that. Recently I tried to flash StatixOS 9.0 and got stuck at the boot logo. I thought of going back to stock rom by using fastboot and wiped the memory. Now fastboot and ADB doesn´t recognize my phone and I am stuck with no OS and no option to flash one.
Previously I used my laptop several times to fastboot flash roms to my phone and it worked flawlessly, I have installed drivers again, used different PCs, swapped cables, USB OTG, tried Wugfresh, SDK manager drivers/manual drivers installation but none worked. PC doesn't even recognizes in other devices or anywhere in device manager.
Any possible solution? It does charge without any issues. Since flashing RR 6-1-0 it never even showed which type of connection I want (charging only/ MTP/ etc).... is this a software issue ?? what am I missing something here? or the daughter board needs to be replaced??
I have been through every possible threads in and outta XDA but no luck trying those tricks.....
TIA
I let a friend of mine borrowed my 2+ a couple weeks ago and he just returned it to me and it will not boot. It was running Lineage 15.1 when I gave it to him and when I try to boot it, it just sits at the boot animation screen but does nothing else. He wiped the memory card so I no longer have a back up to restore and when I try to use LG Bridge, it does not detect the phone and when I try to use LGUP, the phone just shuts itself off after 30 seconds. I've got the 64-bit version of TWRP installed but when I try to connect the phone to my pc to transfer a copy of the Lineage 15.1 zip to the internal memory, the pc says that the device has been disconnected even though I have not touched it and the screen is on. I can't even push the file to the internal memory nor sideload it using the adb sideload feature in TWRP. Is my phone f*cked or is there something I haven't tried that will get the phone back up and running. It's not my daily driver but I would like to get it back up and running if at all possible because it's my play around with phone that I was using to test out different things I've been cooking up.
Hi
I have a nexus p6 stuck in google loop the phone keep restart without stop. I tried to connect to my computer but in vain the phone is not recognized.
I tried several computers with various os (windows 7 and 10) but no connection. when the phone was working I'm sure I had enabled OEM (bootloader ) and USB debugging.
I tried to flash and restore it but it is undetectable by the computer.
could anyone provide me with help or advice so i could fix my phone
thank you
djaf19811 said:
Hi
I have a nexus p6 stuck in google loop the phone keep restart without stop. I tried to connect to my computer but in vain the phone is not recognized.
I tried several computers with various os (windows 7 and 10) but no connection. when the phone was working I'm sure I had enabled OEM (bootloader ) and USB debugging.
I tried to flash and restore it but it is undetectable by the computer.
could anyone provide me with help or advice so i could fix my phone
thank you
Click to expand...
Click to collapse
Only thing I could suggest is making sure your drivers are up to date from google. Uninstall, reboot the computer then reinstall.
You could also try using a Linux based computer/laptop. Linux works much better for me with issues like this than windows does.
You don't have a custom recovery installed right ?
Lawlrus said:
Only thing I could suggest is making sure your drivers are up to date from google. Uninstall, reboot the computer then reinstall.
You could also try using a Linux based computer/laptop. Linux works much better for me with issues like this than windows does.
You don't have a custom recovery installed right ?
Click to expand...
Click to collapse
i don't have custom recovery installed i will try linux distro thx
1. You have the massively known issue with the Snapdragon 810 CPU - your 4 of the 8 cpu cores dont start up any more.
2. Your fix is to use the 4 left cores and you can do this by using this method: https://forum.xda-developers.com/nexus-6p/general/bootloop-death-blod-workaround-zip-t3819515
Conclusion: From now on every single time when you flash a image you have to flash N5X-6P_BLOD_Workaround_Injector_Addon-AK2-signed.zip with TWRP afterwards.
PS: You wont ever get a connection with your computer when you dont press the volume buttons to get to the bootloader and flash from there TWRP.
ncc8uetou5et said:
1. You have the massively known issue with the Snapdragon 810 CPU - your 4 of the 8 cpu cores dont start up any more.
2. Your fix is to use the 4 left cores and you can do this by using this method: https://forum.xda-developers.com/nexus-6p/general/bootloop-death-blod-workaround-zip-t3819515
Conclusion: From now on every single time when you flash a image you have to flash N5X-6P_BLOD_Workaround_Injector_Addon-AK2-signed.zip with TWRP afterwards.
PS: You wont ever get a connection with your computer when you dont press the volume buttons to get to the bootloader and flash from there TWRP.
Click to expand...
Click to collapse
thank you
my mean problem now is that i'am unable to to connect the phone to the computer and it is not recognize