Database Users

How to update model Bnd-L24 already unlocked and twrp installed

Just bought a 7x off swappa for my wife and it has the bootloader unlocked but not rooted, with TWRP as recovery and it still has the November(b101) update so it hasn't been updated. What would be the best way to update it to the latest firmware as I don't want to brick it since I can't find any fix, it's model Bnd-L24.... Any help would be most welcome thanks all

Ultraman666 said:
Just bought a 7x off swappa for my wife and it has the bootloader unlocked but not rooted, with TWRP as recovery and it still has the November(b101) update so it hasn't been updated. What would be the best way to update it to the latest firmware as I don't want to brick it since I can't find any fix, it's model Bnd-L24.... Any help would be most welcome thanks all
Click to expand...
Click to collapse
You can't install an ota with TWRP as your recovery. You'd have to flash the stock recovery

XandeR180 said:
You can't install an ota with TWRP as your recovery. You'd have to flash the stock recovery
Click to expand...
Click to collapse
So I can flash the stock recovery thru twrp right?

Ultraman666 said:
So I can flash the stock recovery thru twrp right?
Click to expand...
Click to collapse
Uhhh not that I know of. Only method I'm aware of is flashing through Fastboot mode. Not sure about flashing through TWRP

XandeR180 said:
Uhhh not that I know of. Only method I'm aware of is flashing through Fastboot mode. Not sure about flashing through TWRP
Click to expand...
Click to collapse
Ok cool I'll research some more for the adb method

Ultraman666 said:
Ok cool I'll research some more for the adb method
Click to expand...
Click to collapse
It's really simple. If you flashed TWRP to your phone via the fastboot method, it's almost the same procedure to get it back. You just need to get the recovery images for the Honor 7x (since there's none available for the Mate SE. They're pretty much identical, though).

XandeR180 said:
It's really simple. If you flashed TWRP to your phone via the fastboot method, it's almost the same procedure to get it back. You just need to get the recovery images for the Honor 7x (since there's none available for the Mate SE. They're pretty much identical, though).
Click to expand...
Click to collapse
That's my issue I have no idea how they installed TWRP, since I bought it used I want to make sure I don't brick it ?

Ultraman666 said:
That's my issue I have no idea how they installed TWRP, since I bought it used I want to make sure I don't brick it ?
Click to expand...
Click to collapse
http://www.desinerd.co.in/how-to-huawei-mate-se-root-twrp-recovery/
Follow the procedure on this site, but instead of TWRP recovery, use the Honor 7x Stock recovery. I'll see if I can find there I found mine but if I can't I'll just upload the ones I have

XandeR180 said:
http://www.desinerd.co.in/how-to-huawei-mate-se-root-twrp-recovery/
Follow the procedure on this site, but instead of TWRP recovery, use the Honor 7x Stock recovery. I'll see if I can find there I found mine but if I can't I'll just upload the ones I have
Click to expand...
Click to collapse
Thanks bro much appreciated

Ultraman666 said:
Thanks bro much appreciated
Click to expand...
Click to collapse
No problem. If you have anything specific you need help with, feel free to ask

XandeR180 said:
No problem. If you have anything specific you need help with, feel free to ask
Click to expand...
Click to collapse
Just let me know when you have the files it the site, and if I need anything else I will ask. Huge help thanks

Ultraman666 said:
Just let me know when you have the files it the site, and if I need anything else I will ask. Huge help thanks
Click to expand...
Click to collapse
Couldn't find where I specifically got these from so I put them up myself.
https://drive.google.com/open?id=1NF-IQD4SBNyrBXbpWeqPvvju2XS7pYvs
When you get to the step where it has you flash the recovery image, you gotta do it a little differently
"fastboot flash recovery recovery.img"
then
"fastboot flash recovery2 recovery2.img"
make sure they're both in the same folder and that you open up a cmd prompt in that folder (shift + right click, then "open command prompt here"

XandeR180 said:
Couldn't find where I specifically got these from so I put them up myself.
https://drive.google.com/open?id=1NF-IQD4SBNyrBXbpWeqPvvju2XS7pYvs
When you get to the step where it has you flash the recovery image, you gotta do it a little differently
"fastboot flash recovery recovery.img"
then
"fastboot flash recovery2 recovery2.img"
make sure they're both in the same folder and that you open up a cmd prompt in that folder (shift + right click, then "open command prompt here"
Click to expand...
Click to collapse
Awesome thanks I will let you know how it goes, again much appreciated

Ultraman666 said:
Awesome thanks I will let you know how it goes, again much appreciated
Click to expand...
Click to collapse
Before proceeding take a complete nandroid backup.
It will help you in case device is bricked.
Also backup system image through adb

miststudent2011 said:
Before proceeding take a complete nandroid backup.
It will help you in case device is bricked.
Also backup system image through adb
Click to expand...
Click to collapse
Ya planned on backing up first just incase, didnt think about the system image good call!! thanks much

Ok successfully removed twrp and stock recovery is there..... I have tried to enter Huawei erecovery to download latest version and recovery but i get this error after its connected to the wifi, getting package info from server..... Getting package info failed? How do I update the phone?

That's because there's no stock ROMs on the Huawei server for the BND-L24. You have to be a little bit patient for the release.
Sidenote: If you are willing to assist. Can you do myself and a few others on this forum a favour by kindly doing a full backup of your L24 and share for the benefit of us who bricked ours. Would greatly appreciate it

wisdomzw said:
That's because there's no stock ROMs on the Huawei server for the BND-L24. You have to be a little bit patient for the release.
Sidenote: If you are willing to assist. Can you do myself and a few others on this forum a favour by kindly doing a full backup of your L24 and share for the benefit of us who bricked ours. Would greatly appreciate it
Click to expand...
Click to collapse
Ok didn't know there wasn't any OTA's for this version
So the November security patch is the latest? If so that's scary
Sure I will do a full backup when I get a sec....

Ultraman666 said:
Ok didn't know there wasn't any OTA's for this version
So the November security patch is the latest? If so that's scary
Sure I will do a full backup when I get a sec....
Click to expand...
Click to collapse
1 March is the latest security patch but only if you signed up for the beta and got the OTA pushed to you. Thanks, will await your backup ?

XandeR180 said:
Couldn't find where I specifically got these from so I put them up myself.
https://drive.google.com/open?id=1NF-IQD4SBNyrBXbpWeqPvvju2XS7pYvs
When you get to the step where it has you flash the recovery image, you gotta do it a little differently
"fastboot flash recovery recovery.img"
then
"fastboot flash recovery2 recovery2.img"
make sure they're both in the same folder and that you open up a cmd prompt in that folder (shift + right click, then "open command prompt here"
Click to expand...
Click to collapse
By chance do you have TWRP 3.1.1 openkirin img you can send me, the one in The TWRP thread isn't working I need to root this thing thanks

Couldn't update Installation problem with august update

So this week i hadn't time enough to install the august update since my phone is rooted so i decided to do it now. What i did before trying to download the update :
1.Deleted all magisk modules that i had then rebooted
2.Unistalled magisk using restore image then rebooted
3.Went to sys update downloaded and it says installation failed
What do to? I'm not rooted now and i don't have twrp installed.
PS. don't want to install it via fastboot/miflash

Follow this guide in future. https://github.com/topjohnwu/Magisk/blob/master/docs/tips.md#ota-installation-tips
To fix your problem now, find a stock boot image for your update version you are currently on and flash it.

emiljano539 said:
PS. don't want to install it via fastboot/miflash
Click to expand...
Click to collapse
If you don't want to use Miflash (Why ?) you can boot temporary TWRP and flash .zip here:
https://forum.xda-developers.com/showpost.php?p=77353883&postcount=542

sipollo said:
If you don't want to use Miflash (Why ?) you can boot temporary TWRP and flash .zip here:
https://forum.xda-developers.com/showpost.php?p=77353883&postcount=542
Click to expand...
Click to collapse
Do i lose my data if i flash this via twrp?
Idk i don't really trust miflash

emiljano539 said:
Do i lose my data if i flash this via twrp?
Idk i don't really trust miflash
Click to expand...
Click to collapse
You won't lose your data.

ludditefornow said:
Follow this guide in future. https://github.com/topjohnwu/Magisk/blob/master/docs/tips.md#ota-installation-tips
To fix your problem now, find a stock boot image for your update version you are currently on and flash it.
Click to expand...
Click to collapse
flashed the stock boot image tried to install it but again it shows that error , i guess the only thing i can do is to flash it manually via fastboot/miflash

sipollo said:
You won't lose your data.
Click to expand...
Click to collapse
Okay thanks, do i have to remove the magisk and flash the stock boot.img or it doesn't matter?

emiljano539 said:
Okay thanks, do i have to remove the magisk and flash the stock boot.img or it doesn't matter?
Click to expand...
Click to collapse
It doesn't matter. You'll have to reinstall Magisk (if you want to).

sipollo said:
It doesn't matter. You'll have to reinstall Magisk (if you want to).
Click to expand...
Click to collapse
which one should i install from them because there are 2 tissot-T files ( for twrp)
"tissot-T-OPM1.171019.026.8.8.23.zip" or "tissot-T-OPM1.171019.026.V9.6.5.0.ODHMIFE.zip" ?

emiljano539 said:
which one should i install from them because there are 2 tissot-T files ( for twrp)
"tissot-T-OPM1.171019.026.8.8.23.zip" or "tissot-T-OPM1.171019.026.V9.6.5.0.ODHMIFE.zip" ?
Click to expand...
Click to collapse
tissot-T-OPM1.171019.026.V9.6.5.0.ODHMIFE.zip
The other file is the latest beta.

sipollo said:
tissot-T-OPM1.171019.026.V9.6.5.0.ODHMIFE.zip
The other file is the latest beta.
Click to expand...
Click to collapse
I installed the zip from twrp and now after reboot i am stucked in bootloop now i can't even boot into twrp. What to do?
After i flashed it in the end says:
Failed to mount /system Invalid argument

Which TWRP did you use?

sipollo said:
Which TWRP did you use?
Click to expand...
Click to collapse
the official one. what version should i use?
its funny now that i flashed the stock rom via mi flash tool and now again the installation shows error..

ludditefornow said:
Follow this guide in future. https://github.com/topjohnwu/Magisk/blob/master/docs/tips.md#ota-installation-tips
To fix your problem now, find a stock boot image for your update version you are currently on and flash it.
Click to expand...
Click to collapse
I'm facing same issue and I was following the guide.

Same here, can't install set Ota, even after remove magisk.
Other thing, cell won't show screen to put pin to boot, previous pin of sim so I think encryption is disable!? Any idea?

[ROM][STOCK IN2011_11_C.21][FASTBOOT] Easily return method to OOS from custom ROMs or simply reflash OOS

Oneplus 8 Fastboot ROMs
DOWNLOADS:
https://www.androidfilehost.com/?w=files&flid=326825
Mirror:
Current version: IN2011_11_C.21_202205172355
PASSWORD: XDA2021 or XDA2022 (newest files)
​

infected_ said:
Made this little project using the script from @mauronofrio FASTBOOT ROMs to return OP8 to latest OOS, since I was always having issues doing so, and always ended up using the unbrick tool for OP8.
Enjoy! If you have any issues, just let me know using a post.
Regards.
Current FASTBOOT ROM 11.0.5.5 download link:
AFH Server:
OP8 OOS 11.0.5.5 FASTBOOT ROM
OP8 OOS 11.0.5.5 MAGISK PATCHED BOOT.IMG
Click to expand...
Click to collapse
I have a T-Mobile device, which I converted to Global and finally installed a custom ROM. For any updates, I have to follow the same route - go back to T-Mobile, then global and then any other ROM. Can I use this utility to go back directly to Global from custom or would I still need to first flash T-Mobile ROM?

sjgoel said:
I have a T-Mobile device, which I converted to Global and finally installed a custom ROM. For any updates, I have to follow the same route - go back to T-Mobile, then global and then any other ROM. Can I use this utility to go back directly to Global from custom or would I still need to first flash T-Mobile ROM?
Click to expand...
Click to collapse
Technically, this process would be the same as a conversion. Just see if you need to backup any other extra partition, like persist.img or other.
Regards.

thank you so much for this, ive been stuck or soft bricked for the last 4 days and this might just be my out.

Hi, thanks for this! Now I have a question, I have latest OOS with Magisk, but since upgrade to 11 i have System UI crashes and serious lags and freeze, I did 4 factory resets and its still there, I want to reflash all from 0, can I use this?

Thank you very much for the contribution

nikola1970 said:
Hi, thanks for this! Now I have a question, I have latest OOS with Magisk, but since upgrade to 11 i have System UI crashes and serious lags and freeze, I did 4 factory resets and its still there, I want to reflash all from 0, can I use this?
Click to expand...
Click to collapse
try reflashing on both slots.

infected_ said:
try reflashing on both slots.
Click to expand...
Click to collapse
Ok, so first I need to flash slot a, and right after that i am gonna flash b slot? Thanks man

showing my ignorance...where is the flash-all.bat script? Is that somewhere in this thread?

gloster2 said:
showing my ignorance...where is the flash-all.bat script? Is that somewhere in this t
Click to expand...
Click to collapse
There's a self extracting file (*.exe) inside the zip file. Have you run it, and checked the extracted files?

infected_ said:
There's a self extracting file (*.exe) inside the zip file. Have you run it, and checked the extracted files?
Click to expand...
Click to collapse
Thanks -- I didn't notice it was an executable. I think I'm ready to go, but just checking. Here's what I've done so far with my T-Mobile version OnePlus 8:
1. completed process to unlock the bootloader (unlocked phone, got token, applied token)
2. set up fastboot in a directory on my Windows PC
3. ran the self-extraction on OnePlus8Oxygen_15.E.35_OTA_0350_all_2103221815-FASTBOOT
Now I'm going to run flash-all.bat. Before I do that, do I need to back up any files, e.g. modem files? Thanks!

gloster2 said:
Thanks -- I didn't notice it was an executable. I think I'm ready to go, but just checking. Here's what I've done so far with my T-Mobile version OnePlus 8:
1. completed process to unlock the bootloader (unlocked phone, got token, applied token)
2. set up fastboot in a directory on my Windows PC
3. ran the self-extraction on OnePlus8Oxygen_15.E.35_OTA_0350_all_2103221815-FASTBOOT
Now I'm going to run flash-all.bat. Before I do that, do I need to back up any files, e.g. modem files? Thanks!
Click to expand...
Click to collapse
backup persist.img and modem.img just in case, and you should be ok to go.
PS: i'm going to upload the fastboot rom without the self extracting method to be easier for users.

Deleted

@infected_ Considering that I am coming from an unlocked bootloader, will this method re-lock the bootloader and is this carrier-branded compatible?

rodken said:
@infected_ Considering that I am coming from an unlocked bootloader, will this method re-lock the bootloader and is this carrier-branded compatible?
Click to expand...
Click to collapse
No, it won't relock the bootloader

infected_ said:
No, it won't relock the bootloader
Click to expand...
Click to collapse
Safe to use for Verizon OP8 5G UW or is this a method to go Global from a carrier-branded version?

infected_ said:
backup persist.img and modem.img just in case, and you should be ok to go.
PS: i'm going to upload the fastboot rom without the self extracting method to be easier for users.
Click to expand...
Click to collapse
sorry for another simple question; I haven't done system level things with Android in a long time. Where are instructions on how to backup those files? I did a little searching, but haven't found anything that works yet.

gloster2 said:
sorry for another simple question; I haven't done system level things with Android in a long time. Where are instructions on how to backup those files? I did a little searching, but haven't found anything that works yet.
Click to expand...
Click to collapse
There is an app for that.

rodken said:
There is an app for that.
Click to expand...
Click to collapse
Thanks! Now I realize that even though I have an unlocked bootloader, I don't have root access. Now I have to figure out how to get that. Sigh.

And...I see much conflicting information on how to root my bootloader unlocked T-Mobile version OnePlus 8. Any advice/pointers to info on the best/easiest way to root it?

OnePlus 8 [IN2015]-[A13-F15]-Stock Boot-Recovery & Patched Boot vs Modded Recovery with ADB Enabled

OnePlus 8 series has just got F15 Update with Dec Security Patch and few improvements. Since it's Incremental Update so it'll be little annoying to extract stock images from payload.bin. So attached to this post are :
+ Stock boot image of IN2105-F15
+ Magisk patched boot image of IN2105-F15
+ Stock recovery image of IN2105-F15 ( in case )
+ Modded recovery image of IN2105-F15 with ADB Enabled, Allow-mock-location and Debuggable are both enabled.
How :
Just simply flashing the images u want using fastboot command.
Cheers! [And Happy New Year Yall]

Hi, I just bought this phone with this F15 update. Should I root it and flash your version ? I'm looking to have the full cam back. thanks

LinhBT said:
OnePlus 8 series has just got F15 Update with Dec Security Patch and few improvements. Since it's Incremental Update so it'll be little annoying to extract stock images from payload.bin. So attached to this post are :
+ Stock boot image of IN2105-F15
+ Magisk patched boot image of IN2105-F15
+ Stock recovery image of IN2105-F15 ( in case )
+ Modded recovery image of IN2105-F15 with ADB Enabled, Allow-mock-location and Debuggable are both enabled.
How :
Just simply flashing the images u want using fastboot command.
Cheers! [And Happy New Year Yall]
Click to expand...
Click to collapse
Thank you so much man! May I ask how do you extract boot.img from incremental updates?

karib97 said:
Hi, I just bought this phone with this F15 update. Should I root it and flash your version ? I'm looking to have the full cam back. thanks
Click to expand...
Click to collapse
Yes, if your bootloader is unlocked.

LinkinLover2013 said:
Thank you so much man! May I ask how do you extract boot.img from incremental updates?
Click to expand...
Click to collapse
I used modified payload_dumper script bro. But in fact, if you're already rooted, you can do it easily since our device is A/B

LinhBT said:
I used modified payload_dumper script bro. But in fact, if you're already rooted, you can do it easily since our device is A/B
Click to expand...
Click to collapse
Yes but always when I update my phone I need to unroot and then I can't get boot.img of incremental. Btw I flashed F15 boot.img modified with magisk and now my wifi isn't working and is stuck on turning on. Strange. What to do Now?

LinkinLover2013 said:
Yes but always when I update my phone I need to unroot and then I can't get boot.img of incremental. Btw I flashed F15 boot.img modified with magisk and now my wifi isn't working and is stuck on turning on. Strange. What to do Now?
Click to expand...
Click to collapse
You sure that ur device's IN2015? Cuz this happened means smt wrong with the kernel ( which inside boot.img and sometimes in dtbo.img too ). And I can only give out 1 guess that is ur device is not In2015

LinkinLover2013 said:
Yes but always when I update my phone I need to unroot and then I can't get boot.img of incremental. Btw I flashed F15 boot.img modified with magisk and now my wifi isn't working and is stuck on turning on. Strange. What to do Now?
Click to expand...
Click to collapse
About the OTA update without lossing root, just don't reboot when System update finished its job and ask to reboot. Instead, Open Magisk, disable all modules, then choose to install to Inactive Slot. After finish, reboot like normal and u'll still have root!

LinhBT said:
You sure that ur device's IN2015? Cuz this happened means smt wrong with the kernel ( which inside boot.img and sometimes in dtbo.img too ). And I can only give out 1 guess that is ur device is not In2015
Click to expand...
Click to collapse
Ye I have IN2015.

LinhBT said:
About the OTA update without lossing root, just don't reboot when System update finished its job and ask to reboot. Instead, Open Magisk, disable all modules, then choose to install to Inactive Slot. After finish, reboot like normal and u'll still have root!
Click to expand...
Click to collapse
Well the problem is that If I try to install update it won´t install when I´m rooted. Always saying error and only thing that helps is to flash stock boot.

LinkinLover2013 said:
Well the problem is that If I try to install update it won´t install when I´m rooted. Always saying error and only thing that helps is to flash stock boot.
Click to expand...
Click to collapse
Use Oxygen Updater to download the update build! Btw, did u fix the wifi?

LinhBT said:
I used modified payload_dumper script bro. But in fact, if you're already rooted, you can do it easily since our device is A/B
Click to expand...
Click to collapse
Yes but always when I update my phone I need to unroot and then I can't get boot.img of incremental. Btw I flashed F15 boot.img modified with magisk and now my wifi isn't working and is stuck on turning on. Strange. What to do Now?
LinhBT said:
Use Oxygen Updater to download the update build! Btw, did u fix the wifi?
Click to expand...
Click to collapse
Nah I tried flashing stock boot.img back from the files u provided but it didn't do anything. Guess I'll need to do fresh install od F13...

LinkinLover2013 said:
Yes but always when I update my phone I need to unroot and then I can't get boot.img of incremental. Btw I flashed F15 boot.img modified with magisk and now my wifi isn't working and is stuck on turning on. Strange. What to do Now?
Nah I tried flashing stock boot.img back from the files u provided but it didn't do anything. Guess I'll need to do fresh install od F13...
Click to expand...
Click to collapse
Strange! How did u flash the magisk patched image? And did u do the disable verity with vbmeta?

LinhBT said:
Strange! How did u flash the magisk patched image? And did u do the disable verity with vbmeta?
Click to expand...
Click to collapse
I got your stock boot.img; patched with magisk app; flashed through PC fastboot (fastboot flash boot boot.img) and that´s all. I wasn´t disabling any verity; what´s that? Also do you have an app that works for updating with oxygen updater pls? I downloaded a zip but can´t find an working updater app that install zips...

LinkinLover2013 said:
I got your stock boot.img; patched with magisk app; flashed through PC fastboot (fastboot flash boot boot.img) and that´s all. I wasn´t disabling any verity; what´s that?
Click to expand...
Click to collapse
When flash non-stock images into stock firmware, we'll have to disable AVB ( Android verified boot ) by flashing vbmeta image ( fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img ) ( OOS13 on 1+ devices may need to flash vbmeta_system too )

LinhBT said:
When flash non-stock images into stock firmware, we'll have to disable AVB ( Android verified boot ) by flashing vbmeta image ( fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img ) ( OOS13 on 1+ devices may need to flash vbmeta_system too )
Click to expand...
Click to collapse
Well. Where can I find Vbmeta.img for F15 pls?

LinkinLover2013 said:
Well. Where can I find Vbmeta.img for F15 pls?
Click to expand...
Click to collapse
I used these files!

LinhBT said:
Use Oxygen Updater to download the update build! Btw, did u fix the wifi?
Click to expand...
Click to collapse
Well. I don't quite understand how to use oxygen updater to update since when I download incremental in oxygenupdater and try to install it through OPocalupdate it fails after like 20% installing same like if i try to install it through classic updater. In oxygenupdater it recommends to switch to full but when you switch to full it doesn't show incrementals, just big system updates like from OOS12.1 to OOS13.

LinkinLover2013 said:
Well. I don't quite understand how to use oxygen updater to update since when I download incremental in oxygenupdater and try to install it through OPocalupdate it fails after like 20% installing same like if i try to install it through classic updater. In oxygenupdater it recommends to switch to full but when you switch to full it doesn't show incrementals, just big system updates like from OOS12.1 to OOS13.
Click to expand...
Click to collapse
I always do the Magisk flash to Inactive slot and never failed. May be there's smt wrong from ur side?

LinhBT said:
I always do the Magisk flash to Inactive slot and never failed. May be there's smt wrong from ur side?
Click to expand...
Click to collapse
So you do it in this order: Go to magisk and select flash to inactive slot -> do OTA update through OPlocalupdate app -> restart phone? Does it have any effect to select flashing magisk to inactive slot before I start OTA udpate? Because it seems like the incremental OTA udpates can install only on unrooted phone with Stock boot.img if I leave it rooted it always stops due to error.

Question [Help] Bootloader loop | No access to EDL

I'd like to begin with a little backstory, it consists of me unrooting the phone via magisk android app and re-flashing the bootloader with a non patched .img of the same version. Afterwards I've decided to lock the bootloader, and that's where the problem struck me.
I've tried all unbricking methods I could find, I can't flash product.img as well as odm.img. I tried switching partitions and re-doing the process, however, nothing works...
I came to a conclusion that the only way for me to fix it was the EDL Unbricking tool, however I cannot put the phone into it. I used the replacement fastboot.exe from the forum as well as a separate EDL Reboot v2 .cmd script but the phone just reboots to the bootloader.
P.S: I have re-flashed the super partition multiple times, flashed boot.img and vector_boot.img in order to enter recovery. But, ironically enough, the recovery mode was even more helpless than I am.
These are the methods I've tried:
[GUIDE][HowTo] Unlock and root Nothing Phone (1)
ANNOUNCEMENT: I'M STOPPING THE FOLLOW UP AND UPDATE OF THIS TOPIC TODAY, IF SOMEONE WANTS TO TAKE OVER, CONTACT THE MODERATOR IN THIS LINK. THE TOPIC REMAINS AS IT IS AND WILL NOT BE UPDATED ANYMORE (BY ME ANYWAY!) GOOD CONTINUATION TO ALL...
forum.xda-developers.com
How to unbrick Nothing Phone 1 fastboot bootloop
Welcome to this unbrick tutorial NB: I state immediately that i'm not responsible for any damage that occurs on your phone. This process worked for my Nothing Phone on 1.1.3, but maybe not on yours. I do not suggest following this tutorial if...
forum.xda-developers.com

How are you even able to flash partitions if your bootloader is locked?

TheNewHEROBRINE said:
How are you even able to flash partitions if your bootloader is locked?
Click to expand...
Click to collapse
I have unlocked it after the bootloader loop took place

aChrome said:
I have unlocked it after the bootloader loop took place
Click to expand...
Click to collapse
ah, I didn't know this was possible. Can you tell on what version you were when the problem happened and what versions have you tried flashing so far?

TheNewHEROBRINE said:
ah, I didn't know this was possible. Can you tell on what version you were when the problem happened and what versions have you tried flashing so far?
Click to expand...
Click to collapse
I was on patched 1.5.3, I tried flashing the stock 1.5.3 and thats when the problem happened. After that I tried re-flashing each and every image using 1.1.7, since its the latest Global Full OTA which isnt incremental and can be disassembled using the payload dumper

aChrome said:
I was on patched 1.5.3, I tried flashing the stock 1.5.3 and thats when the problem happened. After that I tried re-flashing each and every image using 1.1.7, since its the latest Global Full OTA which isnt incremental and can be disassembled using the payload dumper
Click to expand...
Click to collapse
Try flashing 1.5.3 hotfix from
[ROM][Restore][Unbrick] Nothing OS v1.5.4 Global/EEA Fastboot ROM(Full ROM) & boot.img & QFIL ROM (EDL)
Update! : 2023/05/05 20:00 (UTC+9:00) Fastboot ROM and boot.img for NothingPhone(1) are now available. v1.5.4 is available. Sorry for my poor English, I'm Japanese... News: The DSU has been restored in this version. It seems to be usable as long...
forum.xda-developers.com

TheNewHEROBRINE said:
Try flashing 1.5.3 hotfix from
[ROM][Restore][Unbrick] Nothing OS v1.5.4 Global/EEA Fastboot ROM(Full ROM) & boot.img & QFIL ROM (EDL)
Update! : 2023/05/05 20:00 (UTC+9:00) Fastboot ROM and boot.img for NothingPhone(1) are now available. v1.5.4 is available. Sorry for my poor English, I'm Japanese... News: The DSU has been restored in this version. It seems to be usable as long...
forum.xda-developers.com
Click to expand...
Click to collapse
Thanks, I managed to flash partition b successfully. However, the issue still persists.

Can you send a screenshot of the output in the cmd?

TheNewHEROBRINE said:
Can you send a screenshot of the output in the cmd?
Click to expand...
Click to collapse
Wtf, I just re-flashed it with the same OTA and it booted up. Man you are a magician... Also, am I safe to lock the bootloader now?

aChrome said:
Wtf, I just re-flashed it with the same OTA and it booted up. Man you are a magician... Also, am I safe to lock the bootloader now?
Click to expand...
Click to collapse
You should, but the only way to find out is to try.

TheNewHEROBRINE said:
You should, but the only way to find out is to try.
Click to expand...
Click to collapse
Alright, it worked. Thanks a lot man. You rescued me.

aChrome said:
Alright, it worked. Thanks a lot man. You rescued me.
Click to expand...
Click to collapse
You're welcome