Hi! I just bought and installed a 8227L Android Navi on my car. Everything worked fine until it crashed,rebooted itself and now it doesn't recognize the volume knob on the unit. I can set the volume but only from my steering wheel. I tried to set it within factory settings at key study, but it does not recognize, it says key study fail. Other buttons I can remap.
Any tips to fix the issue??
Android: 9211B_00020_V001
Android os: Android 11.0 XY AUTO: F7.3 (X2)
CAN Pro: 9.0.3 (connect): jotan / Sagitar / Jetta / Bora / Tic
DDR: 2G
FLASH: 16G
cpu: A7 1.3GHZ x 4
display: 1024+600
MCU: 4.0 (X2)
Attached you have some pics with more info about the unit. Thanks in advance!
Related
Hello I have an unbranded headunit from eBay. I’ve already contacted the seller and tried my best to scour these threads but that hasn’t helped. I have no control of my subwoofer port on the back of there unit. The upgraded firmware that they show on the advertisement has an equalizer that includes sub, lo, mid, and hi but I have a 4 band with hz. I’m looking for the right firmware/mcu version
What my unit says now.
Android: YT9213A_00009_V001_20200312
Android os: 9.1 XY AUTO: 3.2 (8227L)
CAN Pro: 3.0 (8227L)
DDR: 2G FLASH:16G
Cpu: a7
Display: 1024x600
MCU: 3.1
What I’m looking for it to say
Android: YT_9217c_00005_V003_20181222 HIFI
Not important
Amplifier: ac7315 mos Bile duct 45wx4
Mcu: HW8227L 3.3- SWO-1.3
If that’s not possible I at least would like the most current update for this device or if I can flash another mcu firmware or software from a different device to it that would work too. I just want/need something better than what I’m working with now.
. Thanks in advance for any help.
Hi everybody!
I recently bought a 8227L_demo unbranded Chinese android stereo.
Unfortunately, I can’t control the screen on the dashboard because the simulated buttons are not working…so I can't access the clock and time settings on my display...
Below you can see all my system information (unfortunately I can't attach picture because I'm a newbie).
I have a CANBUS Raise psa-rz-15 device.
Steering Wheel Controls are regularly functioning.
My car is a Citroen C3 (year 2008).
I set the Peugeot 307 (2002-2013) Canbus protocol; however, I tried all the available protocols one by one but nothing changes.
Anybody else has the same problem? What can I do to solve?
Maybe with a firmware update?
Thanks again in advance
Android: YT9213AJ_AHD_00011_V001_20200323
Android os: 9.1
XY AUTO: 3.2 (8227L)
CAN PRO: 3.0 (8227L): )/Peugeot307(2002-2013)
DDR: 1G
FLASH: 16G
Cpu: A7 1.3Ghz x 4
Display: 1024*600
MCU: 3.1 (8227L)
Kernel version
3.18.22
[email protected] #4
Mon Mar 23 17:18:00 CST 2020
Build number
android-trunk-m0.AC8227L-V1.0
What did the reseller suggest?
marchnz said:
What did the reseller suggest?
Click to expand...
Click to collapse
Unfortunately I wasn't able to contact the seller...
Go to -> Car setting -> General
Touch the gear top right.
Enter 8888
Change CanBus Settings to Peugeot 307
Hi!
I already set the Peugeot 307 (2002-2013) Canbus protocol and I tried all the available protocols one by one but nothing changes...
My problem is shown here: https://youtu.be/IWp7nXfxk94?t=1152
bosun8472 said:
My problem is shown here:
Click to expand...
Click to collapse
Hi,
Do you solve your problem ? i have the same for my 308 car with PSA-RZ-15 CANBUS ?
Which canbus do you have ?
So I bought this head unit from Amazon specific for my 2009 Toyota Corolla. It has the fake android 10 but want to flash a working rom. Right now my head unit keeps closing apps and nothing works at this point. Even tried to reset it using the little pin hole on the front of the head unit but doesn’t do anything at all. Please help! All I need to know is which rom to flash to this head unit.
Specs of my head unit
Android: YT9216BF_00007_V004
Android OS: 10.1
XY Auto: 3.4 (8227L)
Can Pro: 3.1 (8227L)
DDR: 2G
Flash: 32G
CPU: A7 1.3GHz x 4
Radio: NXP6856
Display: 1024 x 600
MCU: 3.1 (8227L)
If it doesn't do anything when pushing reset you should return the head unit. The reset button is hardware related and has nothing to do with the firmware so I think there is a technical defect.
Buy a head unit you can find some information here on xda if you expect to get help from other users. Don't buy exotic unknown devices.
For Toyota Corolla Junsun V1 is available. No the best head unit but also not the worst. Or a PX6 could be a good choice.
I need help with Chinese Headunit using iPhone. I did factory reset and now nothing works. PLEASE HELP ME. I am not tech savvy on these units.
Hi to everyone,
I explain you what's my thought since a month. I have a chinese radio head unit and the original radio app it's a little bit bugged and doesn't work well. My question is if there is an other app that I could install on that head unit or if I can change something from the system, such as the mode of searching the FM or the region of searching, etc..
Here's the details of the radio:
- Brand: Ankeway
- System: 9.1
- XY Auto: 1.1 (8227L)
- Ram: 1G
- CPU: A7 1.3 GHz x 4
- Resolution: 1024 x 600
- MCU: 3.5 (8227L)
Thank you in advance
None?
Honestly, the hu is oddball junk
I know I know, but prpbably there was a chance to do it
I just installed the following H.U.
Android: YT5760B_00002_V001
Android os: Android_12.0 XY AUDIO: J1.73 (AC825
CAN BUS: 10.0.3 (disconnect) 2-2009
DDR: 8G
FLASH: 128G
CORE: 8 (64bit) FREQ: 2.5GHz
Radio: AM+FM+RDS
Display: 1280*720(mipi)
MCU1: 0.7 (AC8259) Audio decoder: ADI
DSP: ADI-1701
Everything is working fine except that the car ventilation system is at full speed in the back of the car. I cant seem to be able to control it from the dash oars (car dashboard).
I gave seen a thread with someone mentioning it but after hours of search i cant find that comment/thread anymore.
As it is my first H.U, i just need some idea about this issue. Probably the canbus? Does the canbus message (disconnect) means it is not connected or does this message has nothing to do with the fact it is correctly installed?
P.S the sound Quality is simply amazing!!
Tx in advance
I fixed it by changing the Canbus settings.