Database Users

[Q] HELP! No wifi no camera no Sound on Samsung S4 GT-I9505 after flashing stock

hi there . i am new here and a noob .. i flashed my galaxy s4 gt-i9505 with stock ROM "I9505XXUBMEA" with odin after rebooting i have no sound ,when i launch the camera the device turn off ,WiFi wont turn on.
Please is there any repair for this. I don't care about any warranty or anything. I just want the device fully working with sound and wifi and camera on stock ROM. Please is there any solution to this problem, cant find the solution anywhere it does not matter jelly been or kitkat just working stock rom .thanks in advance.
version:
AP:I9505XXUBMEA
CP:I9505XXUBMEA
CSC:I9505XXOXXBMF1
Adroid Version: 4.2.2
Baseband: I9505XXUFNB9
Kernel Version: 3.4.0-768421
[email protected] #1

Why did you flash 4.2.2? My guess is your were on at least a 4.3 rom. Flash one of the latest roms. Atleast a 4.4.2 rom.

Lennyz1988 said:
Why did you flash 4.2.2? My guess is your were on at least a 4.3 rom. Flash one of the latest roms. Atleast a 4.4.2 rom.
Click to expand...
Click to collapse
I tried Lollipop it didn't work i was stuck in bootloop so i roled back to original one 4.2.2 . i also had the boot message "kernel is not seandroid enforcing set warranty bit kernel" .can u please suggest me what to do .

neoom said:
I tried Lollipop it didn't work i was stuck in bootloop so i roled back to original one 4.2.2 . i also had the boot message "kernel is not seandroid enforcing set warranty bit kernel" .can u please suggest me what to do .
Click to expand...
Click to collapse
Just flash the latest Lollipop again and it should be fixed.
What do you mean Lollipop didn't work? It works, so what steps did you take?

Lennyz1988 said:
Just flash the latest Lollipop again and it should be fixed.
What do you mean Lollipop didn't work? It works, so what steps did you take?
Click to expand...
Click to collapse
i just flashed it with latest Lollipop rom , but didn't start just bootloop , idid factory reset, wipe cache didn't work stuck in bootloop.

neoom said:
i just flashed it with latest Lollipop rom , but didn't start just bootloop , idid factory reset, wipe cache didn't work stuck in bootloop.
Click to expand...
Click to collapse
It should work. What version did you try to flash?

maybe you must more wait? Lollipop long boot after first clean install

Lennyz1988 said:
It should work. What version did you try to flash?
Click to expand...
Click to collapse
this one : I9505XXUHOB7_I9505OXXHOB4_I9505XXUHOB7_HOME.tar

neoom said:
this one : I9505XXUHOB7_I9505OXXHOB4_I9505XXUHOB7_HOME.tar
Click to expand...
Click to collapse
1. Perform a factory rest now
2. Try flashing that firmware again. Redownload it just to be sure.
https://mega.co.nz/#!R9YCjT5T!npRgHavTtiLTDOA3VNgwModN2zsz-q34rWIt5q3Cv1I
Wait at least 20 minutes for it to boot.

Lennyz1988 said:
1. Perform a factory rest now
2. Try flashing that firmware again. Redownload it just to be sure.
Wait at least 20 minutes for it to boot.
Click to expand...
Click to collapse
thks i will try it . i have a bad connection so it will take some time .i will feed back after .

KoNd2i0 said:
maybe you must more wait? Lollipop long boot after first clean install
Click to expand...
Click to collapse
i had a bootloop not a long boot .it just keep rebooting

Lennyz1988 said:
1. Perform a factory rest now
2. Try flashing that firmware again. Redownload it just to be sure.
Wait at least 20 minutes for it to boot.
Click to expand...
Click to collapse
ok just finished flashing . the same problem persist i bypassed the boot but still can't turn on wifi also no sound no camera .what to do ?

Hi, I have same problem as neoom. After flash to LP phone doesn't make any sound at all and the camera is off. I've tried flashing with firmware from Lenny1988 twice but it didn't change anything. I've tried flashing new modem and bootloader - still no sound. Anyone could help?

Use kies tool to upgrade your phone. Go to tools, firmware upgrade and initialization, enter the model number (ex : GT-I9505 with capital letters), then the s/n that you will find on the back sticker behind battery and kies will find and restore the correct csc, will repartition your phone, will wipe all the partitions and will flash the most appropriate firmware for your phone depending on the correct region. Your wifi and camera may not work because toy have a mismatching cp and ap so let the Samsung kies do the job for you remember not to connect the phone while inputting the model number and sn but only when it tells you to connect it in Odin mode.

Kies says GT-I9505 does not support initialization.

neoom said:
ok just finished flashing . the same problem persist i bypassed the boot but still can't turn on wifi also no sound no camera .what to do ?
Click to expand...
Click to collapse
The flashing was succesfull right? Odin gave no errors?
Then flash the firmware again only in this case with a pit and re-partition.
Get the pit from here:
http://forum.xda-developers.com/showthread.php?t=2265477

Maybe you are using the wrong version of Kies? Use Kies3. Because as you can see in this image, i can start initialization.(i cannot enter S/N because i have the gt-i9506) but pay attention to the capital letters! Write it down as the sticker behind the battery sais!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Lennyz1988 said:
The flashing was succesfull right? Odin gave no errors?
Then flash the firmware again only in this case with a pit and re-partition.
Get the pit from here:
[/QUOTE]
,i tried this methode now...art. tried wipe data .and cache same issue .
Click to expand...
Click to collapse

nikosdd said:
Maybe you are using the wrong version of Kies? Use Kies3. Because as you can see in this image, i can start initialization.(i cannot enter S/N because i have the gt-i9506) but pay attention to the capital letters! Write it down as the sticker behind the battery sais!
Click to expand...
Click to collapse
Let me be clear - of course i used Kies3, I'm getting the messege of not supported model after entering proper serial number (checked in Settings menu in phone and on the back sticker).

Hmm that's really weird. Then try to start this procedure while phone is connected to kies. I've done this on a i9505 to friend of mine so I know that there is a way to filly restore phone. Otherwise download the official rom from sammobile depending on your country and flash it via Odin.

just got my edge and ya.... i brokeded it

so i followed the instructions here on how to flash 935U to my verizon variant and i cant get the ODIN process to work. keis and smart switch tell me my phone isnt supported because i tried to restore the phone.. help please. i followed the instructions which are simple to follow. i put my phone in download mode. started odin and loaded all the files and it failed. what can i do now.. waiting for the stock firmare to dowload now but its taking forever

oh and just incase this is why. im on a mac running windows 10 bootcamp. maybe i dont have some drivers needed ?

Head to sammobile and get the official 935v firmware again, or download through samfirm. Make sure you have ODIN 3.12 and leave the phone unplugged and in dl mode. Unzip the fw files and place them in the appropriate boxes (bl, ap, cl, csc) and once they are all in Odin plug your phone in. If the box goes blue as recognized you are hits to press start. Tart will get you back to original asks try again.
And get a pc, lol

thanks for the reply
i have a pc but i am at school for 2 months without it.. i booted windows just to get by for now.
i downloaded the firmware from sammobile and it may have been currupt becasue it didnt work as well. i am worried but i dont think its hardbricked. i just cant seem to figure out why i cant flash the 935U FW
justinsch03 said:
Head to sammobile and get the official 935v firmware again, or download through samfirm. Make sure you have ODIN 3.12 and leave the phone unplugged and in dl mode. Unzip the fw files and place them in the appropriate boxes (bl, ap, cl, csc) and once they are all in Odin plug your phone in. If the box goes blue as recognized you are hits to press start. Tart will get you back to original asks try again.
And get a pc, lol
Click to expand...
Click to collapse

I wouldnt worry about U. Get V back up and then there is whole separate U thread here with a lot of tweaks. If anything else, look at the PH1 firmware thread (may be under beta thread) and try flashing that, then update to PI3.

are there steps i am not informed on like do certain files need to be in folders together or do i need to run something that was left out in the instructions? i have rooted and flashed with odin before and it always seems to be an interesting experience to say the least. but seriously im getting soooo pissed off right now

yeah tried odin 3. 12 with stock firmware.. put the home file in and the other 3 files in the right places.. still failed.. any other advice?

putting all these files on a flash drive and taking them over to a regular pc to see if this helps.. im really at a loss. this should be EASY right now seriously easy. how am i screwing this up!

tried another computer... didnt work. tried different files and methods.. nothing works.. tried verizon repair tool...joke..... tried everything.

It sounds like Odin/PC is not seeing the phone when it's plugged in. Do you have the Samsung drivers loaded?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Don't use home CSC use csc_vzw

it was seeing it when i plugged in.. and it would say so in the log.
suprisingly the verizon repair tool brought it back to life. it restored it to factory settings and firmware.. i want to root but im worried it wont take again
mefloump said:
It sounds like Odin/PC is not seeing the phone when it's plugged in. Do you have the Samsung drivers loaded?
Click to expand...
Click to collapse

puchodog1977 said:
it was seeing it when i plugged in.. and it would say so in the log.
suprisingly the verizon repair tool brought it back to life. it restored it to factory settings and firmware.. i want to root but im worried it wont take again
Click to expand...
Click to collapse
I'm not trying to suggest anything bad by this but did you boot to download mode?

Verizon repair tool fixed it. I dont why the flashing didnt work. I spent too much time. Im not rooting this ****

Error

I'm trying to install the factory rom of my samsumg j320m device, I'm using Odin in the current version (I already tested other previous versions) well in Odin no appears no error says that the rom was successfully installed the problem happens when the device it restarts, it goes to the screen that appears the robot of the android and begins to proceed with the installation but when it arrives in 15% or so it goes to that screen of which I can not leave again, I gave several hard reset, I searched the internet and I did not find anything that could solve this problem if someone can help me thank you very much
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

hollyxerecas said:
I'm trying to install the factory rom of my samsumg j320m device, I'm using Odin in the current version (I already tested other previous versions) well in Odin no appears no error says that the rom was successfully installed the problem happens when the device it restarts, it goes to the screen that appears the robot of the android and begins to proceed with the installation but when it arrives in 15% or so it goes to that screen of which I can not leave again, I gave several hard reset, I searched the internet and I did not find anything that could solve this problem if someone can help me thank you very much
Click to expand...
Click to collapse
How did you set up Odin? Send a pic of the settings tab

ffpp.2003 said:
How did you set up Odin? Send a pic of the settings tab
Click to expand...
Click to collapse

All seem to be ok. I see that it's a TAR file. Personally, I recommend you that use a .tar.md5 file, other than it takes longer, it's safer, because the file could be corrupted, and using the md5 extension, it makes a full revision of the file, looking for corruptions in the file, or information that is incorrect. I also have a j320m, and that never happened to me. Try redownloading the file, without deleting the .md5 extension. And if still getting that error, I'll give you the Odin version that i use with the j320m and other devices that are working perfectly fine.

ffpp.2003 said:
All seem to be ok. I see that it's a TAR file. Personally, I recommend you that use a .tar.md5 file, other than it takes longer, it's safer, because the file could be corrupted, and using the md5 extension, it makes a full revision of the file, looking for corruptions in the file, or information that is incorrect. I also have a j320m, and that never happened to me. Try redownloading the file, without deleting the .md5 extension. And if still getting that error, I'll give you the Odin version that i use with the j320m and other devices that are working perfectly fine.
Click to expand...
Click to collapse
I recorded a video trying to install the rom and then the error, take a look please. I downloaded the original firmware of the device directly from this site: https://www.sammobile.com/firmwares/galaxy-j3/SM-J320M/ZTO/
I downloaded almost everything from the first rom to the most current and nothing
https://www.youtube.com/watch?v=7bOHrvyJaB4
I also tried installing TWRP to install a custom rom, without success: /

hollyxerecas said:
I recorded a video trying to install the rom and then the error, take a look please. I downloaded the original firmware of the device directly from this site: https://www.sammobile.com/firmwares/galaxy-j3/SM-J320M/ZTO/
I downloaded almost everything from the first rom to the most current and nothing
I also tried installing TWRP to install a custom rom, without success: /
Click to expand...
Click to collapse
Hmmmmmm...
It's so rare...
I don't know why it's doing that. When I get home, I'll give you my Odin version, stock rom, and probably drivers, if I still having it. Other than that... I don't know what is generating that problem.
Sent from my Samsung SM-J320M using XDA Labs

ffpp.2003 said:
Hmmmmmm...
It's so rare...
I don't know why it's doing that. When I get home, I'll give you my Odin version, stock rom, and probably drivers, if I still having it. Other than that... I don't know what is generating that problem.
Click to expand...
Click to collapse
Well, I uploaded the file in OneDrive
https://1drv.ms/u/s!AvJ6DFiBtFQij12NYeyKycNa2VG7
There is a zip, wich contains:
-Drivers
-Latest stock ARO rom (Argentina, without carrier, so, it's basically the same as all other clean ROMs)
-Odin (don't remember what version)
-A tool to download the correct and latest firmware for your device (with correct codes for making your "Firmware status" original again)
The only thing it's that when you install the rom, the status of the phone probably will be modified, 'cause the location of the phone is different than the firmware.
Sent from my Samsung SM-J320M using XDA Labs

ffpp.2003 said:
Well, I uploaded the file in OneDrive
https://1drv.ms/u/s!AvJ6DFiBtFQij12NYeyKycNa2VG7
There is a zip, wich contains:
-Drivers
-Latest stock ARO rom (Argentina, without carrier, so, it's basically the same as all other clean ROMs)
-Odin (don't remember what version)
-A tool to download the correct and latest firmware for your device (with correct codes for making your "Firmware status" original again)
The only thing it's that when you install the rom, the status of the phone probably will be modified, 'cause the location of the phone is different than the firmware.
Sent from my Samsung SM-J320M using XDA Labs
Click to expand...
Click to collapse
Ok, I thank you very much :fingers-crossed:

Tell me if it worked!:laugh:
Sent from my Samsung SM-J320M using XDA Labs

odin keeps failing

I've tried several combined files and regular firmware files, no success, odin just fails, any ideas what i could be doing wrong ?
Image of downloading mode screen:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
MODEL NAME: SM-G950F
MODEL NUMBER: SM-G950FZKASEB
CSC: SEB
COUNRY/REGION: Baltic

What is the error it shows. Most common issues include bad drivers,wrong Odin try 3.13b, try usb 2.0 instead of 3.0. Some people have issues in win 10, flashing wrong firmware, and or older firmware than on the device. Those are common issues.
---------- Post added at 06:53 PM ---------- Previous post was at 06:53 PM ----------
Ayylmao42000 said:
I've tried several combined files and regular firmware files, no success, odin just fails, any ideas what i could be doing wrong ?
Image of downloading mode screen:
MODEL NAME: SM-G950F
MODEL NUMBER: SM-G950FZKASEB
CSC: SEB
COUNRY/REGION: Baltic
Click to expand...
Click to collapse
Up

TheMadScientist said:
What is the error it shows. Most common issues include bad drivers,wrong Odin try 3.13b, try usb 2.0 instead of 3.0. Some people have issues in win 10, flashing wrong firmware, and or older firmware than on the device. Those are common issues.
---------- Post added at 06:53 PM ---------- Previous post was at 06:53 PM ----------
Up
Click to expand...
Click to collapse
When i use combination file G950FXXU4ARI1 i get the following error:
When i use firmware file i get the following error:
I'm using Odin 3.13b, USB 2.0, tried on WIN 8.1/10
I really don't know what to do anymore ... :crying:

Ayylmao42000 said:
When i use combination file G950FXXU4ARI1 i get the following error:
When i use firmware file i get the following error:
I'm using Odin 3.13b, USB 2.0, tried on WIN 8.1/10
I really don't know what to do anymore ... :crying:
Click to expand...
Click to collapse
Does the device show fused binary or anything. It should show some kinda error on the device itself

TheMadScientist said:
Does the device show fused binary or anything. It should show some kinda error on the device itself
Click to expand...
Click to collapse
No errors appear on the downloading mode screen

Ayylmao42000 said:
No errors appear on the downloading mode screen
Click to expand...
Click to collapse
Hmm i dont know then i own a US model and things are a bit different

I would like recommend to you a few tips (maybe you already know these tips) for solving your problems with Odin. I think that should be a line "Added" in Odin's log right after connecting your phone in download mode. So it's worth to try reinstall phone drivers in your computer. Next tip is about version of Odin - you should try Odin in version v3.13.1. In this version i flashed my phone several times (on Windows 10 1809) and the process was always fine (before I had a similar problem like you). I would also suggest use the latest firmware for your phone - SEB/G950FXXS4DSE1 (you can download via SamFirm app). At the end if i were you i'd check the check box "Re-Partition" in Options tab (in Odin), which mustn't be checked.
I have also the same phone like you (SM-G950F) just with different CSC (ETL).
I hope that will help you.
Ayylmao42000 said:
I've tried several combined files and regular firmware files, no success, odin just fails, any ideas what i could be doing wrong ?
Image of downloading mode screen:
MODEL NAME: SM-G950F
MODEL NUMBER: SM-G950FZKASEB
CSC: SEB
COUNRY/REGION: Baltic
Click to expand...
Click to collapse

parmen225 said:
I would like recommend to you a few tips (maybe you already know these tips) for solving your problems with Odin. I think that should be a line "Added" in Odin's log right after connecting your phone in download mode. So it's worth to try reinstall phone drivers in your computer. Next tip is about version of Odin - you should try Odin in version v3.13.1. In this version i flashed my phone several times (on Windows 10 1809) and the process was always fine (before I had a similar problem like you). I would also suggest use the latest firmware for your phone - SEB/G950FXXS4DSE1 (you can download via SamFirm app). At the end if i were you i'd check the check box "Re-Partition" in Options tab (in Odin), which mustn't be checked.
I have also the same phone like you (SM-G950F) just with different CSC (ETL).
I hope that will help you.
Click to expand...
Click to collapse
thanks for the reply,
when i connect the phone it gets added to odin, no issues, i use the latest samsung usb drivers, even tried windows 10 build 1809, i've also tried odin version 3.13.1, tried flashing SEB/G950FXXS4DSE1 and odin just fails, re-partition is unticked

First, i use Odin 3.12.3, no need to use a beta, second, you can decrease the wait time A LOT if you are certain your files are not corrupted and remove the "md5" part of the extension, leaving only .TAR, also, you can open the CSC file, you will find a pit file inside, you can try extracting it and putting it in odin's PIT section, that fixes it a lot of time, make sure you are using the correct PIT
Edit: to open the TAR file, i recommend using 7zip

use samfirm to download the latest stock firmware and flash all 4 files using csc instead of home csc

Galaxy S7 sm-g930F stuck on recovery boot loop. 50$ bounty if you help me

Galaxy S7 stuck on recovery boot loop. This phone that i am trying to flash is stuck in a recovery boot loop and i am not getting past the no command screen. Pressing power then vol up gives me the fail to open recovery cause no such folder exist screen. ODIN flash is always returning with kernel rev check fail device 2 binary 1 message on the phone and fail message on odin. Help if anyone knows how to get it to boot please. Photos in the link below
Thanks
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Cant see your screenshot it's corrupt
([emoji813]9/[emoji725]/9[emoji813])

PoochyX said:
Cant see your screenshot it's corrupt
([emoji813]9/[emoji725]/9[emoji813])
Click to expand...
Click to collapse
Can send you a link, Unable to post the link on the page as XDA will not let me post any links for 10 posts?
photos.app.goo.gl/p7tuacPoH3YR2E1E6

https://youtu.be/l8-ccufk4Q0
Have you tried to follow this video?

porphyria said:
Galaxy S7 stuck on recovery boot loop. This phone that i am trying to flash is stuck in a recovery boot loop and i am not getting past the no command screen. Pressing power then vol up gives me the fail to open recovery cause no such folder exist screen. ODIN flash is always returning with kernel rev check fail device 2 binary 1 message on the phone and fail message on odin. Help if anyone knows how to get it to boot please. Photos in the link below
Thanks
Click to expand...
Click to collapse
like the above person said. just installed TWRP and you will be able to boot. If still not work then download Latest firmware of june 2019 month and install it. it has new bootloader and modem and everything... Last good luck

syednawaz said:
like the above person said. just installed TWRP and you will be able to boot. If still not work then download Latest firmware of june 2019 month and install it. it has new bootloader and modem and everything... Last good luck
Click to expand...
Click to collapse
Already tried before posting. OEM unlock and USB debugging is not activated, so the phone's not taking a custom recovery. Downloaded 10+ different firmwares from sammobile, still AP is returning with invalid MD5 error in ODIN. Some even can't unzip. Same results on 2 computers. Don't know what am doing wrong.

porphyria said:
Already tried before posting. OEM unlock and USB debugging is not activated, so the phone's not taking a custom recovery. Downloaded 10+ different firmwares from sammobile, still AP is returning with invalid MD5 error in ODIN. Some even can't unzip. Same results on 2 computers. Don't know what am doing wrong.
Click to expand...
Click to collapse
OK bro. just try this last steps.
Found some bootloader and modem thanks to this person djb77. here is the link for his rom,
https://forum.xda-developers.com/s7-edge/development/rom-galaxy-project-t3792787
just click on link below and download modem and BL.
Here is his modem link
https://androidfilehost.com/?w=files&flid=271403
and here is bootloader link
https://androidfilehost.com/?w=files&flid=271397
CLick on your device version in the link and select the modem and BL of May 16, 2019 and download them as they are latest.
Now i hope you already know that you must have installed samsung driver and you must be using Odin3_v3.13.1
Now boot in download and connect it to pc. if desktop use the backports of usb. Now in odin(try run it as admin sometime) click on BL and select the Bootloader which you have downloaded. And then click CP and select the modem you have downloaded. and click start. Sometime antivirus mess things up too. Try turning it off too.
this is last from me brother. if it works which i pray it should then i would be glad. if it doesn't work. then i am sorry bro.

I will fix it for you by teamviewer But i won't be taking bounty ?

Nisar Ahmed Nisar said:
I will fix it for you by teamviewer But i won't be taking bounty
Click to expand...
Click to collapse
Thanks for that. Might as well give it a try when you're free?

porphyria said:
Thanks for that. Might as well give it a try when you're free?
Click to expand...
Click to collapse
I am always free,
I want you to check your inbox.

porphyria said:
Thanks for that. Might as well give it a try when you're free?
Click to expand...
Click to collapse
have you fixed it??

syednawaz said:
have you fixed it??
Click to expand...
Click to collapse
NISAR Ahmed NISAR is helping me get if fixed. Some progress as it took some rom on Odin, not booting to recovery now, but stuck on boot screen. Hopefully tonight.

Just my two cents-- but I'll bet you might be using the wrong version of Odin. I was in a similar bootloop after I tried flashing it with an Odin I found in some S7 Edge threads and it kept failing with all different types of firmwares. Odin3_v3.13.1_3B_PatcheD is the version that worked for me.

That is true, use correct odin version plus correct rom plus correct method, always know what you are doing or there is a chance you will even make conditions worse..
Also, be specific in your op, tell what you were doing when that started happening, which rom were you using before and your exact model and firmware, so others can help you easily and readers may get a benefit if there is a solution.
Pls, this is not general help forum, post all help related queries on related forum.
Sent from my S7 Edge using XDA Labs