Related
Hi,
don't know if this problem has already occurred before.
I had lineage and TRWP installed on my Axon 7 (EU version) and wanted to go back to the stock a2017g.
Therefore I deleted the ROM and wiped everything with TWRP.
Then I deleted TWRP and now i'm stuck at the the bootloader (which is unlocked), but TWRP seems to be gone.
The main problem is, whenever I try to flash a new stock rom (via recovery), I get the error "signature verification failed" and the process is aborted with no change to the system whatsoever.
Is there anything I can do at this point or is my phone practically dead?
Thanks in advance for any help.
tempest89 said:
Hi,
don't know if this problem has already occurred before.
I had lineage and TRWP installed on my Axon 7 (EU version) and wanted to go back to the stock a2017g.
Therefore I deleted the ROM and wiped everything with TWRP.
Then I deleted TWRP and now i'm stuck at the the bootloader (which is unlocked), but TWRP seems to be gone.
The main problem is, whenever I try to flash a new stock rom (via recovery), I get the error "signature verification failed" and the process is aborted with no change to the system whatsoever.
Is there anything I can do at this point or is my phone practically dead?
Thanks in advance for any help.
Click to expand...
Click to collapse
Try to boot into bootloader interface, and issue command "fastboot flash recovery TWRP.img" on your computer( the current working directory should contain the TWRP.img file) . If your bootloader is unlocked, you should see no error of this command. Then press up/down button to select recovery mode. You should see the familiar TWRP again. Good luck!
tempest89 said:
Hi,
don't know if this problem has already occurred before.
I had lineage and TRWP installed on my Axon 7 (EU version) and wanted to go back to the stock a2017g.
Therefore I deleted the ROM and wiped everything with TWRP.
Then I deleted TWRP and now i'm stuck at the the bootloader (which is unlocked), but TWRP seems to be gone.
The main problem is, whenever I try to flash a new stock rom (via recovery), I get the error "signature verification failed" and the process is aborted with no change to the system whatsoever.
Is there anything I can do at this point or is my phone practically dead?
Thanks in advance for any help.
Click to expand...
Click to collapse
Did you try flashing an official full zip, like B10? That's another thing you can try, since you're going to lose TWRP after you flash a stock rom anyways
If you dont have recovery, flash it from edl mode, you can flash twrp or stock.
Once you install it, performa a full wipe from stock recovery, and flash a full zip.
I have similar problems, I dont loose recovery, but stock dont boot after coming back from aosp, a factory reset did the job. I think is because different filesystems in data partition
Choose an username... said:
Did you try flashing an official full zip, like B10? That's another thing you can try, since you're going to lose TWRP after you flash a stock rom anyways
Click to expand...
Click to collapse
Hi, the B10 ROM from the ZTE homepage did the trick.
Worked out nicely.
Thank you so much.
One final question remains for myself: How can I relock the bootloader (so that the 5 second screen won't show up at the start).
Tried different ways with adb and fastload, but nothing seemed to have an effect here.
So what to do?
Thank you again for your help.
tempest89 said:
Hi, the B10 ROM from the ZTE homepage did the trick.
Worked out nicely.
Thank you so much.
One final question remains for myself: How can I relock the bootloader (so that the 5 second screen won't show up at the start).
Tried different ways with adb and fastload, but nothing seemed to have an effect here.
So what to do?
Thank you again for your help.
Click to expand...
Click to collapse
you shouldn't. Fastboot should do the trick, by doing fastboot oem lock, but many people reported bricking and bad stuff...
Actually that screen comes very handy in case of a brick or if you want to enter a specific mode.l, you just select the mode and voila
Do you have fastboot? I don't know if B10 still has it, but 7.0 hasn't got it
Choose an username... said:
you shouldn't. Fastboot should do the trick, by doing fastboot oem lock, but many people reported bricking and bad stuff...
Actually that screen comes very handy in case of a brick or if you want to enter a specific mode.l, you just select the mode and voila
Do you have fastboot? I don't know if B10 still has it, but 7.0 hasn't got it
Click to expand...
Click to collapse
Hi,
I tried adb and fastboot via pc and with the axon toolkit.
The adb worked fine, but no sign of effect by the fastboot commands.
So I guess I don't have it.
Is there any other solution to at least bypass the 5 second screen?
Thanks
tempest89 said:
Hi,
I tried adb and fastboot via pc and with the axon toolkit.
The adb worked fine, but no sign of effect by the fastboot commands.
So I guess I don't have it.
Is there any other solution to at least bypass the 5 second screen?
Thanks
Click to expand...
Click to collapse
Lol fastboot is not something like EDL, it looks similar to the 5 sec screen...
When you get the 5 sec screen, use the vol keys and pwr to get to the Fastboot option and enter - it should reboot and get to fastboot after some time
You should look up what fastboot, EDL, ADB and DFU are before doing all this stuff - you can mess up badly, and by not knowing you're complicating everything - my explanation and your understanding
I think I messed up my PH-1 something royally.
All I was trying to do is unlock my bootloader and load Magisk.
To preface this, my PH-1 seemed to act a little wonky from the get-go. I bought it 3rd person from a guy on craigslist so anything warranty involved I think I'm out of luck.
The phone would take a while to power on, it took something like 10secs on the power button just to turn it on. And if I set it to reboot , it boots into the bootloader. Also, I was never able to access the recovery (even using power + up). It always felt like I had to hold the buttons for way to long to get to its destination; e.g. up and power to get into fastboot.
Ok where I'm at now. In can occasionally get into fastboot mostly after it bootlooping a few times. It won't get past the Essential logo if I try to boot it up.
PS I was able to unlock the bootloader.
Steps I took to remedy this:
> erase all user data in fastboot
> hold power + u + d to hard power off
> follow this guide https://forum.xda-developers.com/essential-phone/how-to/guide-rooting-essential-ph-1-magisk-t3701976
> attempt to install stock system image via flash-all
>a ton other
Here are the results of that.
https://imgur.com/a/iVwwS
Help me guys please. :crying:
A little progress, I was unable to unlock_critical but its still hanging here
https://imgur.com/a/IdZum
jAm-0 said:
I think I messed up my PH-1 something royally.
All I was trying to do is unlock my bootloader and load Magisk.
To preface this, my PH-1 seemed to act a little wonky from the get-go. I bought it 3rd person from a guy on craigslist so anything warranty involved I think I'm out of luck.
The phone would take a while to power on, it took something like 10secs on the power button just to turn it on. And if I set it to reboot , it boots into the bootloader. Also, I was never able to access the recovery (even using power + up). It always felt like I had to hold the buttons for way to long to get to its destination; e.g. up and power to get into fastboot.
Ok where I'm at now. In can occasionally get into fastboot mostly after it bootlooping a few times. It won't get past the Essential logo if I try to boot it up.
PS I was able to unlock the bootloader.
Steps I took to remedy this:
> erase all user data in fastboot
> hold power + u + d to hard power off
> follow this guide https://forum.xda-developers.com/essential-phone/how-to/guide-rooting-essential-ph-1-magisk-t3701976
> attempt to install stock system image via flash-all
>a ton other
Here are the results of that.
https://imgur.com/a/iVwwS
Help me guys please. :crying:
Click to expand...
Click to collapse
read through this and follow the steps should be good to go.
https://forum.xda-developers.com/essential-phone/development/stock-7-1-1-nmj20d-t3701681
This is also very helpful
https://mata.readthedocs.io/en/latest/
That's the exact process I was going through, and it finally booted up.
The issue I was having was a bad usb connection which wouldn't allow me to unlock_critical.
SOLVED. Still no Magisk, we'll worry about that another time. 5hrs of troubleshooting is enough for one night.
https://imgur.com/a/ZiBzp
SO close to getting Magisk to install, any reason the refuses to flash the boot partition? I used the stock boot.img and had Magisk patch it before I flashed
SO close to getting Magisk to install, any reason the refuses to flash the boot partition? I used the stock boot.img and had Magisk patch it before I flashed
jAm-0 said:
SO close to getting Magisk to install, any reason the refuses to flash the boot partition? I used the stock boot.img and had Magisk patch it before I flashed
Click to expand...
Click to collapse
You have to flash magisk in twrp recovery NOT bootloader mode.
It's right in the OP from the rooting guide you followed:
Do not set up a password if you are on 8.1 twrp doesn't work.
You need to read through that rooting guide and make sure you know what you're doing before you try.
This phone is easy to hard brick and there is no solution to recover from that.
OREO 8.0/8.1
REQUIREMENTS:
An unlocked bootloader.
A working ADB/Fastboot environment on your computer. Knowledge on how ADB and Fastboot works is also preferred.
The stock boot image for whatever build you're running/trying to root.
The latest TWRP build for our device.
If on 8.1, remove your pin/pattern/passcode until the root process is done.
1. Download both the stock boot image for whatever build you're running and the Magisk or SuperSU zip. Transfer both files to your device's internal storage.
2. Reboot your phone into the bootloader, then open up your command prompt or terminal and flash the latest TWRP build for the device using:
Code:
fastboot flash boot twrp.img
3. Once TWRP has finished flashing, reboot into your recovery. When prompted, enter your pattern/passcode/password to decrypt your data in order to gain access to your internal storage.
4. Once you're in TWRP, install the stock boot image and then the Magisk/SuperSU zip.
5. Whenever Magisk/SuperSU finishes installing, simply reboot your device! You should now be rooted.
*NOTE: TWRP will NOT remain installed on your device.
wolfu11 said:
You have to flash magisk in twrp recovery NOT bootloader mode.
It's right in the OP from the rooting guide you followed:
Do not set up a password if you are on 8.1 twrp doesn't work.
You need to read through that rooting guide and make sure you know what you're doing before you try.
This phone is easy to hard brick and there is no solution to recover from that.
OREO 8.0/8.1
REQUIREMENTS:
An unlocked bootloader.
A working ADB/Fastboot environment on your computer. Knowledge on how ADB and Fastboot works is also preferred.
The stock boot image for whatever build you're running/trying to root.
The latest TWRP build for our device.
If on 8.1, remove your pin/pattern/passcode until the root process is done.
1. Download both the stock boot image for whatever build you're running and the Magisk or SuperSU zip. Transfer both files to your device's internal storage.
2. Reboot your phone into the bootloader, then open up your command prompt or terminal and flash the latest TWRP build for the device using:
Code:
fastboot flash boot twrp.img
3. Once TWRP has finished flashing, reboot into your recovery. When prompted, enter your pattern/passcode/password to decrypt your data in order to gain access to your internal storage.
4. Once you're in TWRP, install the stock boot image and then the Magisk/SuperSU zip.
5. Whenever Magisk/SuperSU finishes installing, simply reboot your device! You should now be rooted.
*NOTE: TWRP will NOT remain installed on your device.
Click to expand...
Click to collapse
I realize all that, the issue is I cannot access any sort of recovery because I think my bootloader is defective.
For example from a cold restart if I press the power button for say 3 -5 seconds it wont boot, just boot to the Essential logo and loop. To get the phone to boot I have to hold the power down for 15-20 seconds while it bootloops a couple times then it'll boot.
Is there a possible way to reflash the bootloader software if it is defective? It's unlocked btw
There is a way to install magisk via fastboot with a patched_boot img which I'm working on. Cant seem to find the right boot img to patch for 8.1
PS Is it possible to flash .zips through fastboot? e.g. custom roms etc
Was finally able to get into recovery, so all is well. Thanks for the help yall
OP, what was your process to successfully get into recovery and fix your problems?
It may help others sometime?
gimpy1 said:
OP, what was your process to successfully get into recovery and fix your problems?
It may help others sometime?
Click to expand...
Click to collapse
It's really hard to say, my phone has a serious problem with it. sometimes I cant get it to boot, it will boot into the bootloader over and over and over. I've managed to get Lineage 15.1 on if for a bit until I tried to get back into the recovery which sent it manic.
I just got lucky I was able to get into TWRP and flash lineage.
my first issue not being able to flash the stock image via fastboot because I didn't unlock_critical which can sometimes fail when the usb connection is bad.
Currently flashing stock again if my phone will boot up. I'm not sure whats wrong with my bootloader but its causing a ton of havoc
My essential phone stuck in boot logo,bootloader work but recovery doesn´t work
Bootloader locked.
Oem unlocking disable.
Usb debugging disable.
How to flash stock recovery or twrp on bootloader locked ? please
Thank you!
katastyle971 said:
My essential phone stuck in boot logo,bootloader work but recovery doesn´t work
Bootloader locked.
Oem unlocking disable.
Usb debugging disable.
How to flash stock recovery or twrp on bootloader locked ? please
Thank you!
Click to expand...
Click to collapse
Same boat for me - just keep rebooting to show Powered by Android Screen and then reboot again and again. Was able to see my device using fastboot devices command but all attempts to access recory just repeat the bootloop entry. I would happily check the OEM UNLOCK option in dev settings but can't even get it to book to any OS to make that option happen. Still shows bootloader locked on bootloader screen - any help someone can suggest?
I had this problem tonight also. In my case I suspect it had to do with the install of magisk in which I checked both boxes and patched the bootloader. on reboot I was stuck on boot. Just wanted to add my solution. I got the pie back to stock zip here https://forum.xda-developers.com/essential-phone/development/stock-7-1-1-nmj20d-t3701681 then I put it into the adb folder and ran the flashall.bat script. I tried the no wipe one and it saved my information. very happy I didnt have to resetup my phone in the end.
katastyle971 said:
My essential phone stuck in boot logo,bootloader work but recovery doesn´t work
Bootloader locked.
Oem unlocking disable.
Usb debugging disable.
How to flash stock recovery or twrp on bootloader locked ? please
Thank you!
Click to expand...
Click to collapse
I am in the same boat. I tried to re-install the OS, but because my USB debugging was not enabled, Fastboot worked but ADB would not and since I basically wiped the recovery area, my phone will only boot into Fastboot but will not allow any loading of recovery. I would pay for someone to help. This is so hard to figure out. I have contacted Essential but since my phone is over 12 months old, the warranty has expired.
Help please. It seems like such a waste to have a bricked phone.
Hi - I am trying to reinstall TWRP on my OP6T after upgrading to OOS 10.3.0.
I am running Minimal ADB and Fastboot v1.4.3 on my Win10 PC. I have connected my phone to my PC, and entered Fastboot mode. The OP6T is detected when I do a fastboot devices command.
Next, I try doing a temporary Recovery Mode boot into TWRP with a fastboot boot twrp-3.3.1-1-fajita.img command. This is where I run into a problem ... While the Minimal ADB and Fastboot window says that the TWRP image was sent to the OP6T, I am still stuck on the Fastboot screen, and the phone is locked up and doesn't reboot the image.
What is going wrong?
¿GJ?
¿GotJazz? said:
Hi - I am trying to reinstall TWRP on my OP6T after upgrading to OOS 10.3.0.
I am running Minimal ADB and Fastboot v1.4.3 on my Win10 PC. I have connected my phone to my PC, and entered Fastboot mode. The OP6T is detected when I do a fastboot devices command.
Next, I try doing a temporary Recovery Mode boot into TWRP with a fastboot boot twrp-3.3.1-1-fajita.img command. This is where I run into a problem ... While the Minimal ADB and Fastboot window says that the TWRP image was sent to the OP6T, I am still stuck on the Fastboot screen, and the phone is locked up and doesn't reboot the image.
What is going wrong?
¿GJ?
Click to expand...
Click to collapse
I'm having the same problem
¿GotJazz? said:
Hi - I am trying to reinstall TWRP on my OP6T after upgrading to OOS 10.3.0.
I am running Minimal ADB and Fastboot v1.4.3 on my Win10 PC. I have connected my phone to my PC, and entered Fastboot mode. The OP6T is detected when I do a fastboot devices command.
Next, I try doing a temporary Recovery Mode boot into TWRP with a fastboot boot twrp-3.3.1-1-fajita.img command. This is where I run into a problem ... While the Minimal ADB and Fastboot window says that the TWRP image was sent to the OP6T, I am still stuck on the Fastboot screen, and the phone is locked up and doesn't reboot the image.
What is going wrong?
¿GJ?
Click to expand...
Click to collapse
3.3.1.-1???...
cultofluna said:
3.3.1.-1???...
Click to expand...
Click to collapse
Affirmative. Fajita 3.3.1-1. See attached screenshot from TWRP.me. Should I be booting into a different version?
¿GotJazz? said:
Affirmative. Fajita 3.3.1-1. See attached screenshot from TWRP.me. Should I be booting into a different version?
Click to expand...
Click to collapse
Those "official" TWRP builds don't work properly on Android 10. Here is a link to the one you need:
https://forum.xda-developers.com/on...overy-unofficial-twrp-touch-recovery-t3861482
jp0469 said:
Those "official" TWRP builds don't work properly on Android 10. Here is a link to the one you need:
https://forum.xda-developers.com/on...overy-unofficial-twrp-touch-recovery-t3861482
Click to expand...
Click to collapse
Thanks, @jp0469! This helps a lot!
Just to be clear (and to get to a successful conclusion without a bricked phone), I won't be installing a TWRP installer ZIP file after booting into this TWRP image (The old style method), but instead installing the same TWRP IMG file as a "Recovery RAM Disk", correct?
¿GJ?
¿GotJazz? said:
Thanks, @jp0469! This helps a lot!
Just to be clear (and to get to a successful conclusion without a bricked phone), I won't be installing a TWRP installer ZIP file after booting into this TWRP image (The old style method), but instead installing the same TWRP IMG file as a "Recovery RAM Disk", correct?
¿GJ?
Click to expand...
Click to collapse
Need a little more info before you proceed.
I know you said that you're currently on Android 10.3.0
Are you rooted with Magisk? If not, are you planning on rooting?
jp0469 said:
Need a little more info before you proceed.
I know you said that you're currently on Android 10.3.0
Are you rooted with Magisk? If not, are you planning on rooting?
Click to expand...
Click to collapse
I was rooted with Magisk, but that got lost when I did the 10.3.0 update. Definitely planning on TWRPing and rooting again, as long as it's safe.
¿GotJazz? said:
I was rooted with Magisk, but that got lost when I did the 10.3.0 update. Definitely planning on TWRPing and rooting again, as long as it's safe.
Click to expand...
Click to collapse
Stick to good old ones...
Once booted in twrp via fastboot flash the installer zip. It has always worked and will always. Always latest version. And flash Magisk after.
¿GotJazz? said:
I was rooted with Magisk, but that got lost when I did the 10.3.0 update. Definitely planning on TWRPing and rooting again, as long as it's safe.
Click to expand...
Click to collapse
Put the latest Magisk zip and TWRP installer (zip file) on your phone's internal memory if you don't already have them there. Now you can fastboot boot the TWRP img file (Q version). Next flash the TWRP zip to permanently install TWRP into recovery. Reboot back to recovery to make sure it worked and then flash Magisk to re-gain root.
Reboot
Thanks, guys - The only reason I asked about the alternate "RAM Disk" method was because it was listed as the installation method by the developer on the link that @jp0469 provided earlier.
I'll try the old-fashioned method, since y'all say that it works OK.
I have a brand new hp windows 10 PC and a new op6t converted to international version. Running pie latest oxygen os. I need to get minimal adb fastboot installed so I can install twrp and root. Ik it's a little different process to get twrp on 6t but I need some help. Can someone provide me with the correct fastboot to install
[email protected] said:
I have a brand new hp windows 10 PC and a new op6t converted to international version. Running pie latest oxygen os. I need to get minimal adb fastboot installed so I can install twrp and root. Ik it's a little different process to get twrp on 6t but I need some help. Can someone provide me with the correct fastboot to install
Click to expand...
Click to collapse
I always install the latest directly from Google. There is a link on this page to the latest version of Windows ADB and Fastboot. Just unzip the file you download into a directory of your choice.
Everytime I try to boot twrp It says waiting on device. What's that mean
[email protected] said:
Everytime I try to boot twrp It says waiting on device. What's that mean
Click to expand...
Click to collapse
It mean you didn't install driver on your PC.
---------- Post added at 03:38 AM ---------- Previous post was at 03:35 AM ----------
¿GotJazz? said:
Hi - I am trying to reinstall TWRP on my OP6T after upgrading to OOS 10.3.0.
I am running Minimal ADB and Fastboot v1.4.3 on my Win10 PC. I have connected my phone to my PC, and entered Fastboot mode. The OP6T is detected when I do a fastboot devices command.
Next, I try doing a temporary Recovery Mode boot into TWRP with a fastboot boot twrp-3.3.1-1-fajita.img command. This is where I run into a problem ... While the Minimal ADB and Fastboot window says that the TWRP image was sent to the OP6T, I am still stuck on the Fastboot screen, and the phone is locked up and doesn't reboot the image.
What is going wrong?
¿GJ?
Click to expand...
Click to collapse
Type Command: fastboot flash boot
And Use TWRP 3.3.1.30 .
Hi - I am trying to reinstall TWRP on my OP6T after upgrading to OOS 10.3.0.
I am running Minimal ADB and Fastboot v1.4.3 on my Win10 PC. I have connected my phone to my PC, and entered Fastboot mode. The OP6T is detected when I do a fastboot devices command.
Next, I try doing a temporary Recovery Mode boot into TWRP with a fastboot boot twrp-3.3.1-1-fajita.img command. This is where I run into a problem ... While the Minimal ADB and Fastboot window says that the TWRP image was sent to the OP6T, I am still stuck on the Fastboot screen, and the phone is locked up and doesn't reboot the image.
What is going wrong?
Click to expand...
Click to collapse
same thing happened to me, but my screen went black and i cant seem to turn it back on again. what a day. fml
i really need help, i only have that one phone for daily usage. arghhhh
uncleheng said:
same thing happened to me, but my screen went black and i cant seem to turn it back on again. what a day. fml
i really need help, i only have that one phone for daily usage. arghhhh
Click to expand...
Click to collapse
press volume down,up and power button same time for 10sec your phone will boot to bootloader mode.
After doing the fastboot boot twrp-3.3.1-30-fajita-Q-mauronofrio.img in Fastboot Mode, I installed twrp-3.3.1-30-fajita-installer-mauronofrio.zip in the booted TWRP Recovery Mode, and everything is working fine again.
Thanks, guys!
Hey I am running Android 10.3.7 and am having the same problem, I tried unofficial twrp linked abouve and still stuck on fastboot screen, I think I'm using abd 1.43, if twrp doesn't work is there an alternative? I'm newish to rooting I've rooted other phones but that was back in the good old days where it wasn't complicated. I am running a T-Mobile phone converted to international with bootloader unlocked
I really need help with finding a good custom ROM for my ONN 8' inch tablet. It is already rooted and has TWRP recovery installed. Thanks in advanced.
I really like Pixel Experience, I have a Pixel so I guess it makes my life easier with the same UI. Bliss worked well too for me. I've read that Havoc is good but I haven't used it.
razredge said:
I really like Pixel Experience, I have a Pixel so I guess it makes my life easier with the same UI. Bliss worked well too for me. I've read that Havoc is good but I haven't used it.
Click to expand...
Click to collapse
Do you think you can send me a link with the ROM download and instructions on how to install it? I have TWRP and root access so don't worry about that. Pixel or Bliss.
antoinejr1111 said:
Do you think you can send me a link with the ROM download and instructions on how to install it? I have TWRP and root access so don't worry about that. Pixel or Bliss.
Click to expand...
Click to collapse
Here's a full list.
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-%28GSI%29-list
I think you can find the flashing instruction in this sub-forum. Just look around. I think it's in How to Unlock by tek3195 but I'm not sure.
razredge said:
Here's a full list.
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-%28GSI%29-list
I think you can find the flashing instruction in this sub-forum. Just look around. I think it's in How to Unlock by tek3195 but I'm not sure.
Click to expand...
Click to collapse
Which one should I download?
https://github.com/EnesSastim/Downloads/releases/download/2019-08-24/PixelExperience_Plus-9.0-arm64_ab.7z
Honestly if I were you I'd read up a bit before attempting to flash a GSI. Do you know the difference between A and A/B? Do you know you need a copy of your vbmeta?
razredge said:
https://github.com/EnesSastim/Downloads/releases/download/2019-08-24/PixelExperience_Plus-9.0-arm64_ab.7z
Honestly if I were you I'd read up a bit before attempting to flash a GSI. Do you know the difference between A and A/B? Do you know you need a copy of your vbmeta?
Click to expand...
Click to collapse
I know what type of devices my tablet is, but I do need a "vbmeta.img"
I know how to flash it though.
I tried to install Pixel Experience but it wont go past the Google Logo help!
https://github.com/EnesSastim/Downl...19-08-24/PixelExperience_Plus-9.0-arm64_ab.7z
antoinejr1111 said:
I tried to install Pixel Experience but it wont go past the Google Logo help!
https://github.com/EnesSastim/Downl...19-08-24/PixelExperience_Plus-9.0-arm64_ab.7z
Click to expand...
Click to collapse
When on that boot logo use adb to iissue the following command: adb shell setprop debug.stagefright.ccodec 0
After booted up and you make it through setup make sure to modify build.prop manually and add debug.stagefright.ccodec=0 to the end of the file so you dont need adb every reboot.
Sent from my SM-G975U1 using XDA Labs
jwarrior319 said:
When on that boot logo use adb to iissue the following command: adb shell setprop debug.stagefright.ccodec 0
After booted up and you make it through setup make sure to modify build.prop manually and add debug.stagefright.ccodec=0 to the end of the file so you dont need adb every reboot.
Sent from my SM-G975U1 using XDA Labs
Click to expand...
Click to collapse
I know this is old but I have the same issue with one thing different. I followed everything I needed to from here: https://www.xda-developers.com/flash-generic-system-image-project-treble-device/
I was rooted with Magisk but they say that shouldn't matter. I have the same device BTW, android 9. Unlocked bootloader and can flash in fastboot, twrp and even SP flash tool.
So I boot to TWRP, do a factory reset and reboot back to twrp and flash the GSI you linked to. everything goes great...no errors nada. It boots to the letter G, but in a few seconds it says to enter the password to access the device (it's encryption). Reboot to fastboot, flash vbmeta from stock, reboot and same thing. Reboot to twrp and format the data (removes encryption). Reboot system again and this time i hear the PC acknowledge its connected once the device boots to the letter G, but no ADB or storage access and just hangs on the big letter G. So I reboot to twrp, ADB works. I pull the build.prop and add the recommendation above and remount the device using ADB remount and pushed it back to system. Reboot and again, boots to the letter G and hangs there.
razredge said:
I really like Pixel Experience, I have a Pixel so I guess it makes my life easier with the same UI. Bliss worked well too for me. I've read that Havoc is good but I haven't used it.
Click to expand...
Click to collapse
My Onn 8" is A-only. Pixel Experience requires an AB-partitioned phone.
DragonFire1024 said:
I know this is old but I have the same issue with one thing different. I followed everything I needed to from here: https://www.xda-developers.com/flash-generic-system-image-project-treble-device/
I was rooted with Magisk but they say that shouldn't matter. I have the same device BTW, android 9. Unlocked bootloader and can flash in fastboot, twrp and even SP flash tool.
So I boot to TWRP, do a factory reset and reboot back to twrp and flash the GSI you linked to. everything goes great...no errors nada. It boots to the letter G, but in a few seconds it says to enter the password to access the device (it's encryption). Reboot to fastboot, flash vbmeta from stock, reboot and same thing. Reboot to twrp and format the data (removes encryption). Reboot system again and this time i hear the PC acknowledge its connected once the device boots to the letter G, but no ADB or storage access and just hangs on the big letter G. So I reboot to twrp, ADB works. I pull the build.prop and add the recommendation above and remount the device using ADB remount and pushed it back to system. Reboot and again, boots to the letter G and hangs there.
Click to expand...
Click to collapse
So I figured it out. If you are doing this from stock, you will have to grab the vbmeta image from the firmware then boot to fastboot and erase a few things. first start by erasing the system. When done, you have to flash the vbmeta image to vbmeta with option --disable-verity. then flash vbmeta again and use option --disable-verification. whenever you flash an image, even when flashing TWRP to its recovery, you have to flash vbmeta and disable verity and verification before and after flashing. This tablet is encrypted in boot, recovery, system, cache and userdata. Vendor seems to not need manual flashing. Miss disabling verity/verification before and after on any of those, the tablet will hang at the boot logo forever. In some cases I managed to get it to still boot, only to have the systemUI and other apps crash within minutes because they could not store data.
$cronos_ said:
My Onn 8" is A-only. Pixel Experience requires an AB-partitioned phone.
Click to expand...
Click to collapse
AB here...weird.
Hello,
I recently tried to degoogle my phone with Lineage and twrp. It's been a bit of a brick wall. Long story short i'm stuck in twrp. It boots into recovery fine from that. Everything else is DOA. When I plug it in the pc recognizes it and I can see my storage. I run adb devices and it comes up. When I reboot to bootloader I see download as I should on the phone screen and I hear it connect to the pc. Then that's it, it doesn't show up as storage or when I run adb of fastboot commands. I fairly certain TWRP F'd this all up. I have the recovery image for lineage but like I said nothing gets done.
So the question is, is it totally bricked or is there a soulotion I haven't found yet?
Thanks for the listen.
Some LineageOS build working with own recovery so you can try to flash with LineageOS recovery via sideload option...
gouthamram said:
Some LineageOS build working with own recovery so you can try to flash with LineageOS recovery via sideload option...
Click to expand...
Click to collapse
That's the whole problem. I can't even do that.
mech1164 said:
That's the whole problem. I can't even do that.
Click to expand...
Click to collapse
First of all flash LineageOS recovery on fastboot mode then restart to LineageOS recovery & flash LineageOS rom via adb sideload...
Everything you will do even working fastboot mode...
A/B partition system is caused whole problem so this is only the method to flash custom rom...
As I said this has been the whole problem. I boot back to bootloader where It says Download Mode. When I try to flash the recovery image this is what I get.
C:\Users\rpwor\NexusTools>fastboot flash recovery lineage-18.1-20210831-recovery-PL2.img
< waiting for any device >
And there it sits never to move again. Now do you understand what i'm dealing with?
The problem might be the recovery image you want to flash as it's for a Nokia 6.1 (PL2) not Nokia 6.1 Plus (DRG).
If your device is actually a Nokia 6.1, then you could try the `Install Recovery Ramdisk` option in TWRP, under `Advanced`.
mech1164 said:
As I said this has been the whole problem. I boot back to bootloader where It says Download Mode. When I try to flash the recovery image this is what I get.
C:\Users\rpwor\NexusTools>fastboot flash recovery lineage-18.1-20210831-recovery-PL2.img
< waiting for any device >
And there it sits never to move again. Now do you understand what i'm dealing with?
Click to expand...
Click to collapse
How is your brick? Did you find a way to revive it?