Hey everyone,
I have a Carlinkit adapter model CPC200-CMAP and have been using it with iPhone to display CarPlay.
The AutoKit SW version is 2022.08.18.1707
The dongle box version is 2022.04.25.1323
The CarPlay functionality works great, but I'm having weird issues with audio.
Whenever I'm listening to audio via the phone (e.g. music, podcasts) and there's an audio "switch" (like notification from Waze or a phone call), the audio immediately switches to the car (builtin) radio and disconnects the phone audio.
Essentially what happens is, I get a phone call, answers it, and immediately hear the full volume of the radio and need to switch to the phone speaker to hear the call.
Anyone else experiencing this issue? It is the only thing preventing me from enjoying this amazing product.
Related
Finally got bluetooth in my car stereo and reviewed some threads prior to posting, but not sure anyone asked / answered the question I have. I'm basically wondering how people are using their bluetooth stereo's. From what I can tell so far I have 2 options.
1. Phone pairs, i listen to my car stereo and if a phone call comes in the stereo picks up the call if i say, and upon completion back to my car stereo
2. Phone pairs, put the car into BT Audio mode and stream audio from my phone including phone calls.
The problem is, i'm looking for a way to combine both. For example I'd like to be able to listen to my car stereo, and if i get a notification i hear it over the radio, not just phone calls. I haven't tried yet, but i'm guessing the nav will be the same way, if i'm listening to the stereo and running nav on my phone i will get no turn by turn like i would if i was listening to music on my phone and running nav.
Is there a way to do this? Am I missing something? I have the Sony Xplōd™ MEX-BT3900U. Is this a limitation of my stereo, or just not how most people use their bluetooth?
I just ordered a replacement radio as well with BT support. I'd be curious wth what other people have to say with experience as well.
I use this all the time.
Both options will work provided the head unit you bought supports media streaming.
Your phone will connect both phone and media over Bluetooth. You listen to your media and if a call comes in you can take it while the media is paused. Media will resume after call completed.
Notifications and navigation will pause and resume media as needed.
Sent from my NookColor
I've found the quality of the audio over bluetooth to be very degraded. Have a rear AUX 1/8th port and run a cable to mount, Then use BT headset for all if need be, but have Pandora playing Excision & Downlink radio the entire time
Hi guys, so I'v tried to use my Nexus 4 and my RAZR HD and they both have the same issue. When I connect my phone to my car stereos bluetooth, it works fine for audio. Music plays through the speakers just great, and my stereo can reach my contacts. The problem I have is with calling. My stereo has a built in microphone, but for some reason, when I call or receive a call, my phone plays the other persons voice over my car speakers, but the stereo's microphone doesn't work. If I turn the audio mode on my phone manually to "headset" instead of "bluetooth" then the microphone works, but the other person voice doesn't go over the speakers anymore! It seems like the audio out is tied to my cars speakers, whereas the microphone is registered under "headset." Has anyone else ever heard of this happening? I just want both the audio in and audio out to be on bluetooth when I make a call.
Hello.
I am using my S4 in car.
It connects at same time to my car hands free (Audi MMI) with Call Audio profile and it connects to my A2DP Music receiver (connected to my car IPOD cable) using A2DP profile.
This dongle supports also Call Audio profile but I have paired it using only A2DP.
Connections are good and phone always connect to both without connection issues.
Sometimes (often) when it is connected to both devices, music and sound stop playing (the player is going on with playing and with time counter but I can't hear any sound from car or from phone speaker).
If I disconnect car hands free, music starts playing from car audio speakers.
If I reconnect car hands free again, music stops playing.
When this happen, the only way I found to solve is to restart the phone and then all is ok (phone hands free and music streaming).
I have the problem with 4.3 but it was the same also with previuos 4.2.2 android version.
I think it is a phone problem since restarting always solve it.
Someone had the same problem or has any advice?
Thank you
Chris
Seicane s09206 Bluetooth Issue in Phone Calls & Connected BT Devices Not Displayed
Hi there!
I purchased this Android 8 radio from Seicane for my 2007 Jeep Grand Cherokee:
***seicane.com/seicane-s09206-android-gps-radio-car-stereo-for-2002-2007-chrysler-300-m-300c-300-limited-touring-with-dvd-player-gps-navigation-system-mirror-link-touch-screen-rearview-camera-tv-video-wifi-canbus-obd2-bluetooth-usb-sd-steering-wheel-control
It is using MCU: ZHAN_(NOR)__90_C9RD6686_CAN(A)PX5D1808140
Which looks like this s200 platform: ***roadnav.com.cn/show_content.php?id=949
I am having the following issues:
1) I can not hear audio from my car speaker with Bluetooth calls but it will send audio through the microphone. I can hear streaming Bluetooth music from my car speakers fine. I believe this may be a result of a phone audio setting for the Bluetooth device however I can not see paired devices from the radio.
2) I can not see currently paired devices from the radio. I believe this feature is disabled. Is there a way to enable this? I am able to pair my iPhone by just going to my phone setting but the list of connected Bluetooth devices does not show on the android radio. I have tried installing third party bluetooth managers and they are also blocked from seeing the connected devices.
3) The EQ fader goes to zero volume when the speakers are all the way to the front, and all speakers have full volume when it's faded all the way to the rear. Balance left and right work perfectly. This may also be related to the Bluetooth issue as I head most BT phone calls just use the front speakers.
Thanks for your time!
Jayzo
Hi My problem is that I can dial out manually but I have no steering wheel control both phone and volume control l hope can help me thank you in advance Ned
Hey guys. Bought a JY-UO138P4 last year and installed it on my Ford F350 -- had no problems with it whatsoever.
Transferred it to my Dodge Diesel, and now everything works EXCEPT for bluetooth audio. Youtube videos, phone calls, all bluetooth audio (including keypad) goes completely mute with phone connected. With phone disconnected, radio and keypad tone work.
Anyone have any ideas what the problem might be