Database Users

Testers/Help needed to add OnePlus 1, 2 and 3 to Unified Android Toolkit

Hi,
Im working on adding the OnePlus 1, 2 and 3 device to the Unified Android Toolkit but need some help as I don't own any of the devices.
If anyone has a device which has not been unlocked or rooted, I need to know the error message displayed in the command prompt when the fastboot oem unlock command is run without enabling oem unlocking in developer options.
I also need a few people who could help test various procedures in the Toolkit. I am modifying the Nexus Toolkit so most things will be the same.
Any help and/or knowledge about the OnePlus devices would be appreciated.
Thanks, Mark.

Questions:
1. Can you fastboot boot on OnePlus devices (fastboot boot boot.img or fastboot boot recovery.img) or does the image need flashing first. I have looked at some root procedures for the OnePlus and they fastboot flash the imge first, then reboot to bootloader and fastboot the image. Im not sure what that is about.
2. Does the standard twrp recovery image work on the OnePlus devices? I have seen a lot of posts where twrp has failed and a different twrp recovery was recommended to fix the problem (which then worked).
3. I need links to all the builds for the OnePlus 1, 2 and 3 devices. Does anyone have these?
4. Does the Universal adb driver pack from koush (CWM) work with the OnePlus? I have found the official drivers made by OnePlus for their devices but I just want to make sure they are the best ones to use. I read that samsung drivers also work.
5. I have been told that the OnePlus devices usb mode does not revert to "charging only" like all the Nexus devices and that adb commands can be sent with the device in MTP mode (Nexus devices need to be switched to PTP to communicate). Can this be confirmed.
I think this is all I need to get a working Toolkit ready within a few days.
Mark.

mskip said:
Questions:
1. Can you fastboot boot on OnePlus devices (fastboot boot boot.img or fastboot boot recovery.img) or does the image need flashing first. I have looked at some root procedures for the OnePlus and they fastboot flash the imge first, then reboot to bootloader and fastboot the image. Im not sure what that is about.
2. Does the standard twrp recovery image work on the OnePlus devices? I have seen a lot of posts where twrp has failed and a different twrp recovery was recommended to fix the problem (which then worked).
3. I need links to all the builds for the OnePlus 1, 2 and 3 devices. Does anyone have these?
4. Does the Universal adb driver pack from koush (CWM) work with the OnePlus? I have found the official drivers made by OnePlus for their devices but I just want to make sure they are the best ones to use. I read that samsung drivers also work.
5. I have been told that the OnePlus devices usb mode does not revert to "charging only" like all the Nexus devices and that adb commands can be sent with the device in MTP mode (Nexus devices need to be switched to PTP to communicate). Can this be confirmed.
I think this is all I need to get a working Toolkit ready within a few days.
Mark.
Click to expand...
Click to collapse
1. Yes,
Code:
fastboot boot boot.img
works.
2. Old firmware needs old TWRP (link) as new firmware needs new TWRP (link).
There is also hybrid recovery which supports both firmware (link) or also this thread which lets you flash right firmware with the good recovery.
3. Thread to official zip and unofficial fastboot files for the Oneplus Two. Here for the Oneplus One. Thanks to @Spannaa. I think mirrors for the Oneplus 3 are actually not available.
4. I don't know.
5. Yes, in MTP, adb commands work. But I think without USB for Marshmallow, the connectivity will go back to Charge only.

mskip is in the house ??
Sent from my ONE A2005 using Tapatalk

Last thing to do is the stock firmware flashing procedure but I think everything else is done.
Does anyone have a OnePlus 1, 2 or 3 and can test any parts of the Toolkit? Main parts to test is driver install, unlock/relock, apk and folder backup and rooting.
Firmware flash procedure should be finished by tomorrow.
Mark.

Hi Mark,
I got a OnePlus 2 with latest OOS 3.0.2
Bootloader unlocked
rooted
TWRP 3.0.2-1
I'm willing to test...
Manuel

castor31 said:
Hi Mark,
I got a OnePlus 2 with latest OOS 3.0.2
Bootloader unlocked
rooted
TWRP 3.0.2-1
I'm willing to test...
Manuel
Click to expand...
Click to collapse
Thanks, what kind of testing can you do?
If you don't want to touch your rom then the basic functions (apk backup, booting to stock/custom recovery) but ideally if you can make a twrp backup or don't mind wiping the device then I need the bootloader unlock, flash stock firmware, rooting, etc tested. If you can do the more in depth testing I can compensate you with a pro code so you can also test the ALLINONE root procedure.
Let me know as the OnePlus 2 main code has been completed and the device modules are being built now.
Mark.

Hi Mark.
OnePlus One with latest COS-13.1-ZNH2KAS1KN
stock
bootloader unlocked
not rooted
twrp backup done
Willing to help with more in depth testing if still needed.
Frank

mskip said:
Thanks, what kind of testing can you do?
If you don't want to touch your rom then the basic functions (apk backup, booting to stock/custom recovery) but ideally if you can make a twrp backup or don't mind wiping the device then I need the bootloader unlock, flash stock firmware, rooting, etc tested. If you can do the more in depth testing I can compensate you with a pro code so you can also test the ALLINONE root procedure.
Let me know as the OnePlus 2 main code has been completed and the device modules are being built now.
Mark.
Click to expand...
Click to collapse
Yes, I can test all this.
I did a dirty flash when the OOS3 community build was released in March. So its time for me to wipe my device and do a clean install...
I'm using your Toolkit with pro for my GNex, n8000 and Nexus5. would be great if you can provide a pro code.
Best
Manuel

UPDATE - TEST RELEASE FOR ONEPLUS DEVICE SUPPORT
I have finished all the work on the OnePlus modules for the 1, 2 and 3 devices and it is ready for testing.
You can download and test the Toolkit from the below link. Please remember that this IS a test version at the moment as I do not own any OnePlus devices but I have checked all the code thoroughly and don't see any problems. I am especially pleased with the unlock/lock routines and will probably implement the code for the Nexus modules if it works well.
Everything can be checked (and please do) except downloading a stock build directly from the Toolkit as I am waiting to hear back from AndroidFileHost to see if I can get direct links to use in the Toolkit. The fastboot flash routines are working though and the Toolkit will detect the storage of the device (16GB or 64GB) and flash the relevant userdata image so you do not have to do that manually anymore.
I have used the Universal USB driver pack from CWM so if anyone has not installed OnePlus drivers yet PLEASE test if this works. I did originally include the official drivers from OnePlus but they close the Toolkit when the drivers installation starts and thats not great.
The ALLINONE routine should work fine and I have sent out some pro codes to testers to check it all works.
All builds are covered and the correct version of TWRP will be downloaded depending on the build selected. Please check everything and let me know of any bugs or textual errors (as I used a lot of the Nexus code) so I can release it publicly as soon as possible.
Download Link: http://skipsoft.net/?wpdmdl=2627
Thanks, Mark.

Frudge1701 said:
Hi Mark.
OnePlus One with latest COS-13.1-ZNH2KAS1KN
stock
bootloader unlocked
not rooted
twrp backup done
Willing to help with more in depth testing if still needed.
Frank
Click to expand...
Click to collapse
Mark- I have the same version on my OnePlus One but unable to unlock the bootloader also. Can you share the procedure to do it. So far, I was trying to use the Toolbox V6 and when I do unlock bootloader in fastboot mode but phone doesnt get detected even. Please help

reply.rathi said:
Mark- I have the same version on my OnePlus One but unable to unlock the bootloader also. Can you share the procedure to do it. So far, I was trying to use the Toolbox V6 and when I do unlock bootloader in fastboot mode but phone doesnt get detected even. Please help
Click to expand...
Click to collapse
Has the bootloader been unlocked before or is this the first time you want to unlock it?
Do you have adb and fastboot drivers installed?
Do you have any knowledge of using adb/fastboot commands in the command prompt?
First thing is to make sure you have the correct drivers installed: http://www.skipsoft.net/?page_id=1302
You can try the Toolkit to see if the bootloader will unlock or I can talk you through the procedure but its a simple command (fastboot oem unlock, or from the toolkit fastboot-toolkit oem unlock).
If it won't unlock you may need to boot to stock recovery and flash a stock image back to your device.
Mark.

Looking for full Firmware File to fix a bricked Lenovo Tab 4 8 TB-8504F

Hi!
I borrowed this tablet from a friend who said I could use it for awhile. I was installing OTA OS updates to the device and I think I inadvertently hit the power button at a bad time while futzing with putting it in a case. Now it won't boot and just hangs on the LENOVO logo screen.
I can hold volume up + power and get to the Android 8.1 Recovery menu. I've cleared all the data and cache, but that didn't fix it. I think I will have to restore the firmware on it, but am open to other suggestions.
Now, finding that firmware has been a real challenge. It looks like a russian "lenovo forums" website hosted the file at one point, and literally everything links to that russian website and file, but all I get is a 404 when trying to download the firmware file. I was able to find the Tab4 8 Plus file, but that doesn't match this tablet.
I already told my friend who said not to worry about it, but I feel bad and want to fix it. I can't find anything useful on the Lenovo support pages, except other people mentioning the russian website and getting the firmware file from there. Thanks for any help you can provide.
This is the site that I keep getting links to: -x--snip--x- I guess I can't post URLs yet since this is a new account.
Some of the OTA incremental updates I can download, but I need to find the full firmware file. Judging by the linking to this file I see in other threads and forums, this file link stopped working sometime between July 2019 and today. Thank you.

I was just in a similar situation yesterday.
https://forum.xda-developers.com/showpost.php?p=81833275&postcount=2055
Lenovo MOTO Smart Assistant downloads the QFIL file and rewrites the internal flash via EDL mode to restore the stock ROM.
https://pcsupport.lenovo.com/jp/en/...er-list/component?name=Software and Utilities

I have the same problem I downloaded the program but it can not install stock rom.When I open the device it enters fastboot and I can not configure anything. I can access fastboot twrp but when. Any help?

giorgakis1966 said:
I have the same problem I downloaded the program but it can not install stock rom.When I open the device it enters fastboot and I can not configure anything. I can access fastboot twrp but when. Any help?
Click to expand...
Click to collapse
I'm just a noob, but i recovered from a similar scenario this morning... I found that pushing volume+ and powering on doesn't enter EDL like it needs to, but rather boots to TWRP, if you can boot into the ROM you can run the command "adb reboot edl" which gets it into the Emergency Download Mode. I would imagine that you could boot into TWRP then run a similar command in the terminal

ROM Unbrick LenovoTAB 4 8 Plus Stock Rom_Rooting File1- BOOT.img RECOVERY.img for Fastboot flashing— File2- For QFIL resulting in Android 7.1.1. which will find the OTA update to Oreo after completing the installation. File3- For TWRP Restore. (use

[GUIDE] Convert TMO to EU via MSM Tool, no SIM Unlock or Bootloader Unlock needed!

*** Use this at your very own risk.
*** You will lose all data
*** Backup your working modem and persist, just in case
*** Read the entire post and follow the steps closely before asking for help. Post all error messages and steps you took. Screenshots and MSM logs will be best.
!!! I have officially retired my 8T, and can no longer provide additional support on this device !!!​
It's finally here! A MSM tool that will convert your T-Mobile OnePlus8T+5G to EU KB05BA. From here you can local upgrade to any OOS flavor you want. This gives you Local Upgrade option, faster upgrades, open betas, dual SIM, and more! In fact, after conversion, you can unlock the bootloader without the unlock token (still need to be SIM unlocked, but in case you don't want to wait for the unlock token or if OnePlus's website is broken)!
If you are still SIM locked, you lose the Unlock app for when your device becomes unlocked, it's only available in the stock TMO ROM. If you want to go back to TMO ROM at any point, flash back with the TMO MSM: https://forum.xda-developers.com/t/...l-to-restore-your-device-to-oxygenos.4180981/
Steps:
Download the MSM Conversion package:
AFH
MD5: 5ddb543c8a5e7587e0b2ad24d2025e77
Run MsmDownloadTool V4.0.exe (Windows 7 users may need to run the win7 version included)
Select User type: "Other" and press Next.
Press "Start". Don't mess with the default settings.
Put your phone in EDL mode.
Code:
adb reboot edl
or completely turn off your device, hold vol up + vol down and plug in the cable.
Wait about 5 minutes while it works.
Done! If you keep the bootloader locked and run it stock, the About Phone page will be missing some fields.
If you run into any MSM tool issues, most likely you have a driver problem. See the FAQ in @Some_Random_Username's post
Instructions to Bootloader Unlock a SIM locked device:
In ADB:
Code:
adb shell pm uninstall -k --user 0 com.qualcomm.qti.uim
Reboot
Go to dev settings and enable OEM Unlock
Reboot to bootloader
Code:
fastboot oem unlock
No unlock.bin needed
Old fastboot method
*** Know how to use the MSMTool, Don't start before figuring it out.
*** DO NOT ATTEMPT THIS IF YOU ARE NOT FAMILIAR WITH THE STEPS DESCRIBED IN THIS GUIDE
* The steps in this guide will convert your TMO KB2007/KB05CB to Global 11.0.5.6.KB05AA, or EU 11.0.3.4.KB05BA
* NR and LTE bands are flashed in nvRAM, not in modem.img or any other partition. You cannot get global bands by flashing a global ROM, nor can you lose TMO bands by flashing another ROM.
* Instructions are the same as running any other MSM unbrick tool.
* You can use this guide to convert to your own variant by extracting payload and flashing from a full OTA. See manual instructions towards the end.
* Use the latest platform tools: https://developer.android.com/studio/releases/platform-tools, https://forum.xda-developers.com/android/general/tool-adb-fastboot-installer-tool-windows-t3999445. DO NOT USE MINIMAL ADB, it has not been updated for years and will cause a crash where you'll need to MSM back to stock.
* Make sure your drivers are up to date. This guide will not walk you through setting up platform tools or updating drivers. When encountering fastboot issues, make sure to include the output of fastboot --version in your post.
* Do not ask for OTAs, MSMs, or anything else not related to the steps described herein. There are plenty of threads around for those.
* This guide does not pertain to Cyberpunk conversion. See other threads.
* This guide converts you to an older firmware so you can take a FULL OTA via Oxygen Updater. Do not skip this step if you want a stable build.
Steps to convert your device to Global or EU
As simple as possible:
You need your device bootloader and SIM unlocked. Follow the instructions here (It says 6T, but applies to all OP devices): https://support.oneplus.com/app/answers/detail/a_id/588/~/how-to-unlock-bootloader-for-oneplus-6t-(t-mobile-edition)
Download and unzip the conversion package:
Global 11.0.5.6
EU 11.0.3.4
Boot to fastbootd.
From adb:
Code:
adb reboot fastboot
From fastboot/bootloader:
Code:
fastboot reboot fastboot
If you are having trouble booting into fastbootd, and have a FC number at the bottom of the bootloader screen, you'll need to MSM to factory first.
[*]You should be at a screen that says "fastbootd" on top. DO NOT CONTINUE IF YOU ARE NOT HERE. SEE HIDDEN FOR AN EXAMPLE.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Execute "flash_all.bat" for Windows, or "flash_all.sh" for Linux, from the unzipped directory from step 2 as cwd.
Optional: Flash magisk'd boot
Code:
fastboot flash boot boot_magisk_patched.img
Reboot into recovery, and wipe everything.
Once fully booted, download Oxygen Updater, set your device to OnePlus 8T of your regional choice and local upgrade to the latest OTA of your regional choice.
Optional: You can re-lock your bootloader at thois point. DO NOT TRY before the full OTA upgrade above, or you'll have to MSM.
Manually:
Unlock bootloader
Download the full OTA of your choosing
Extract the OTA payload with https://github.com/vm03/payload_dumper or https://androidfilehost.com/?fid=818070582850510260
With the output of the payload as your cwd, execute:
Code:
fastboot flash product product.img
fastboot flash abl abl.img
fastboot flash aop aop.img
fastboot flash bluetooth bluetooth.img
fastboot flash boot boot.img
fastboot flash cmnlib cmnlib.img
fastboot flash cmnlib64 cmnlib64.img
fastboot flash devcfg devcfg.img
fastboot flash dsp dsp.img
fastboot flash dtbo dtbo.img
fastboot flash featenabler featenabler.img
fastboot flash hyp hyp.img
fastboot flash imagefv imagefv.img
fastboot flash keymaster keymaster.img
fastboot flash logo logo.img
fastboot flash mdm_oem_stanvbk mdm_oem_stanvbk.img
fastboot flash modem modem.img
fastboot flash multiimgoem multiimgoem.img
fastboot flash odm odm.img
fastboot flash qupfw qupfw.img
fastboot flash recovery recovery.img
fastboot flash spunvm spunvm.img
fastboot flash storsec storsec.img
fastboot flash system system.img
fastboot flash system_ext system_ext.img
fastboot flash tz tz.img
fastboot flash uefisecapp uefisecapp.img
fastboot --disable-verity flash vbmeta vbmeta.img
fastboot --disable-verity flash vbmeta_system vbmeta_system.img
fastboot flash vendor vendor.img
fastboot flash xbl xbl.img
fastboot flash xbl_config xbl_config.img
Replace boot.img with your magisk'd boot if desired
Reboot to recovery and wipe everything
Troubleshooting
Error: "remote: no such file or directory"
You are not in the correct cwd. Fastboot needs to be accessible from the same directory as the .img files, so fix your PATH or make a copy fastboot.exe in the same directory as the .img files
Error: "remote: Flashing is not allowed for Critical Partitions"
You are not in fastbootd. Check step 4.
Error: "Invalid sparse file format at header magic"
Ignore this message, not an error
Special thanks to:
@jwarrior319 for the initial linux script
@cammykool and @awr128 for helping debug some of the steps and clarifying pain points
@radiohead7778580 for a better Global conversion
Fixing the About Phone page
These steps are optional, and will fix the "About Phone" page. There are no performance differences.
You need to rooted with Magisk
Download the fix: here
In the Modules page in MagiskManager, Install the downloaded zip file via "Install from storage"
Reboot, the About Phone page is filled out.
Issues so far (please post if you run into more):
In OOS11, "About phone" page does not work properly.
Use the magisk module above to fix it.
In OOS12, Dual SIM is not supported.
A11 based A12 ROMs support Dual SIM after conversion, use my enable_dsds module.
Unlocked bootloader without unlock_token must be done while in OOS11, as OOS12+ ABL will check that a token is needed

craznazn said:
*** Use this at your very own risk.
*** You will lose all data
*** Backup your working modem and persist, just in case
*** Know how to use the MSMTool, in case you do soft brick anything
*** DO NOT ATTEMPT THIS IF YOU ARE EASILY OFFENDED WHEN THINGS DON'T WORK PERFECTLY
* I've done this with the EU KB05BA.
* You can patched the boot.img prior to doing all this, to make things easier if you want root in your target build.
* This method should work for other builds, if you can find a full OTA of KB05AA (for Intl/Global)
Download the EU Full OTA. Or use another FULL OTA if you have it:
11.0.1.2
11.0.3.4
Extract the payload.bin, and dump the payload using Payload Dumper
The "About Phone" screen seems to be broken: Processor, Camera, and Screen all show "None"
5G
AOD
Fingerprint sensor
Click to expand...
Click to collapse
Nice! Thank you. So aside from the "About Phone" info not displaying correctly, am I understanding everything else appears to be working? My apologies if I missed something, reading this from mobile on XDA Labs.
Edit: I am SIM unlocked & I do have my bootloader unlock token so I should be good (just haven't actually unlocked my bootloader YET). I think you may want to mention those requirements in the OP, hopefully to help avoid unnecessary questions. It seems obvious, but you know... it's the internet.
Sent from my OnePlus 8T using XDA Labs

stmims1124 said:
Nice! Thank you. So aside from the "About Phone" info not displaying correctly, am I understanding everything else appears to be working? My apologies if I missed something, reading this from mobile on XDA Labs.
Sent from my OnePlus 8T using XDA Labs
Click to expand...
Click to collapse
I'm just starting to play with it now, so far everything I've been doing seems to work. I also can't get SafetyNET to pass, so that might be an issue for some.

craznazn said:
I'm just starting to play with it now, so far everything I've been doing seems to work. I also can't get SafetyNET to pass, so that might be an issue for some.
Click to expand...
Click to collapse
Perhaps an update to the very latest Magisk Canary & Magisk manager might help? Canary gets updated often, and I ran into that a few times on my 7 Pro. It's also entirely possible it may take extra work...I don't know, but I hope not!
Sent from my OnePlus 8T using XDA Labs
---------- Post added at 02:58 AM ---------- Previous post was at 02:57 AM ----------
craznazn said:
I'm just starting to play with it now, so far everything I've been doing seems to work. I also can't get SafetyNET to pass, so that might be an issue for some.
Click to expand...
Click to collapse
Oh, also I'm sure this is pretty obvious but I've also made this mistake... Forgot to turn on Magisk Hide and then scratch my head wondering why it won't pass.
Sent from my OnePlus 8T using XDA Labs

stmims1124 said:
Oh, also I'm sure this is pretty obvious but I've also made this mistake... Forgot to turn on Magisk Hide and then scratch my head wondering why it won't pass.
Click to expand...
Click to collapse
LOL that was it... feels like a dummy man

craznazn said:
LOL that was it... feels like a dummy man
Click to expand...
Click to collapse
Dude, I've doing this s**t since 2010 with the HTC Evo and still do that type of s**t all the damn time. I just get comfortable (cocky is more accurate), like, "oh I know what to do, I can do this in my sleep"...and then yeah, scratching my head, wiping my phone or some dumb s**t because I didn't do the easy trouble shooting stuff.
Sent from my OnePlus 8T using XDA Labs

SafetyNet is fine if you do the global Magisk Hide

So if I opt to not root. Will I just get OTAs like the normal global variant? I assume so. But just curious.

craznazn said:
*** Use this at your very own risk.
*** You will lose all data
*** Backup your working modem and persist, just in case
*** Know how to use the MSMTool, in case you do soft brick anything
*** DO NOT ATTEMPT THIS IF YOU ARE EASILY OFFENDED WHEN THINGS DON'T WORK PERFECTLY
* I've done this with the EU KB05BA.
* You can patched the boot.img prior to doing all this, to make things easier if you want root in your target build.
* This method should work for other builds, if you can find a full OTA of KB05AA (for Intl/Global)
You need your device bootloader unlocked. Follow instrustions here (It says 6T, but applies to all OP devices): https://support.oneplus.com/app/ans...-bootloader-for-oneplus-6t-(t-mobile-edition)
Download the EU Full OTA. Or use another FULL OTA if you have it:
11.0.1.2
11.0.2.3
11.0.3.4
Also check this thread
Extract the payload.bin, and dump the payload using Payload Dumper
Execute the following starting from ADB and in the payload output directory. You can start at Fastboot if you are already there:
I haven't used it much yet, but here's what I know so far:
Issues (please post if you run into more):
The "About Phone" screen seems to be broken: Processor, Camera, and Screen all show "None"
What appears to work:
5G
Dual SIM, though I can't test without a proper 2-SIM tray
AOD
Fingerprint sensor
Click to expand...
Click to collapse
If you have the dual SIM tray from the the 7T it will work in the 8T, doesn't fit perfectly flat to the body (if you have a case, probably wouldn't he able to tell) but it will read the sim card 1, I can't confirm it will read sim 2, maybe someone could try, or see if an 8 sim tray would work.

awr128 said:
If you have the dual SIM tray from the the 7T it will work in the 8T, doesn't fit perfectly flat to the body (if you have a case, probably wouldn't he able to tell) but it will read the sim card 1, I can't confirm it will read sim 2, maybe someone could try, or see if an 8 sim tray would work.
Click to expand...
Click to collapse
The dual sim tray made for the 8t can be bought on ebay
Sent from my OnePlus KB2007 using XDA Labs

jwarrior319 said:
The dual sim tray made for the 8t can be bought on ebay
Click to expand...
Click to collapse
Nice, I looked for one a few days ago and couldn't find any.

LLStarks said:
SafetyNet is fine if you do the global Magisk Hide
Click to expand...
Click to collapse
Whats going on buddy, nice to see you! Broke down and bought the 8t as well I see

I am successfully on the European. I extracted the payload before but I wasn't flashing correctly in fastboot, had everything working except the phone.
Now all good..
Thing to test is to see if I lose data like I did randomly with the 8.

cammykool said:
So if I opt to not root. Will I just get OTAs like the normal global variant? I assume so. But just curious.
Click to expand...
Click to collapse
Not sure yet, it might not but the local upgrade option is now available, at least in the EU version. I tested that to install the EU version on the second slot and it worked fine.

After we follow the guide can we just do the local upgrade option as normal

jwarrior319 said:
The dual sim tray made for the 8t can be bought on ebay
Sent from my OnePlus KB2007 using XDA Labs
Click to expand...
Click to collapse
I couldn't find one, but it looks like the 8 tray may fit so I got one of those. Even if it doesn't work, it's not that expensive until I can find a dual-tray 8T

cammykool said:
After we follow the guide can we just do the local upgrade option as normal
Click to expand...
Click to collapse
The option is there.

This doesn't seem as simple, I think I'll wait for a easier way using the MSM Tool method to convert like it was with the other T-Mobile OP devices

SmileBigNow said:
This doesn't seem as simple, I think I'll wait for a easier way using the MSM Tool method to convert like it was with the other T-Mobile OP devices
Click to expand...
Click to collapse
If ur BL is unlocked u shld be able to just dl oxygen updater, select whichever variant u want to convert to, dl the local upgrade apk and after dl'ing the update to internal go into an activity launcher and launch the local upgrade apk and install. Then once converted extract ur boot img from the OTA zip and patch magisk if u want root u don't even have to be rooted to covert

Shooter7889 said:
If ur BL is unlocked u shld be able to just dl oxygen updater, select whichever variant u want to convert to, dl the local upgrade apk and after dl'ing the update to internal go into an activity launcher and launch the local upgrade apk and install. Then once converted extract ur boot img from the OTA zip and patch magisk if u want root u don't even have to be rooted to covert
Click to expand...
Click to collapse
if this works ill do this, BUt currently bsdiff4 is kicking my ass and refuses to install

[ROM][STOCK][FASTBOOT] Stock OxygenOS Fastboot ROMs For OnePlus 8T

Ever wanted to unbrick your device or switch to stock ROM from a custom ROM without using MSM Unbrick tool and keeping your bootloader unlocked after that well fastboot ROMs are here to help you . I have extracted all images from the stock zip and i have made a new zip with the Fastboot ROM with a flash-all.bat included. This will work only if your bootloader is unlocked. This will erase all your data and will wipe your internal storage.
HOW TO FLASH
1). Download the zip
2). Unpack the zip in a folder
3). Reboot the OnePlus 8T in fastboot-bootloader mode (Power and volume + and volume-)
4). Connect the OnePlus 8T to PC
5). Run flash-all.bat flasher
6). Wait until the process end
7). Voila! your OnePlus 8T will now boot into OxygenOS
POINTS TO REMEMBER
* "Invalid sparce file format at header magic" is not an error, you need to wait a bit when you see that string, just wait.
* These ROMs can't be used to update or downgrade your phone but just to restore your phone.
* This can’t be used to switch from ColorOS to OxygenOS you can use MSM unbrick tool to do that.
* !!! IMPORTANT !!!
Before flashing make sure you know about which type of ram your device supports i.e LPDDR4X/LPDDR5 as flashing wrong xbl config will hardbrick your device.
Here’s how you can check what type of ram your device has:-
Now, as to exactly find out which variant that you have, turn on USB debugging and enter this command:-
Code:
adb shell getprop ro.boot.ddr_type
If the value is 0, that means you have LPDDR4X. If the value is 1, that means you have LPDDR5.
This command is more reliable than the Devcheck and other apps.
DOWNLOAD:- https://sourceforge.net/projects/op8t-9r-fastboot-roms/files/

Thank you for this...
Is there also a DL for the OP8T+ 5G firmware? Or does this ROM contain the firmware?
TIA

Wisiwyg said:
Thank you for this...
Is there also a DL for the OP8T+ 5G firmware? Or does this ROM contain the firmware?
TIA
Click to expand...
Click to collapse
This already contains firmware

Not working here, installation stops by error, and phone enters qualcomm crashdump mode.

mzmudzin said:
Not working here, installation stops by error, and phone enters qualcomm crashdump mode.
Click to expand...
Click to collapse
hmm what error? can u share a screenshot pls

Didnt make a screenshot. Tried to used this rom on op8T european version, with ddr5. Tried flash two times, both failed. Sorry that i can`t help you more.

mzmudzin said:
Didnt make a screenshot. Tried to used this rom on op8T european version, with ddr5. Tried flash two times, both failed. Sorry that i can`t help you more.
Click to expand...
Click to collapse
so u have no idea at which point it failed?

Doesn't work for me too. Flash is going well but after reboot, after splashscreen (the one of security related to unlocked bootloader) i got i crashdump. Fastboot is working, recovery is not. So i had to restore with MSM

HELLBOY017 said:
Ever wanted to unbrick your device or switch to stock ROM from a custom ROM without using MSM Unbrick tool and keeping your bootloader unlocked after that well fastboot ROMs are here to help you . I have extracted all images from the stock zip and i have made a new zip with the Fastboot ROM with a flash-all.bat included. This will work only if your bootloader is unlocked. This will erase all your data and will wipe your internal storage.
HOW TO FLASH
1). Download the zip
2). Unpack the zip in a folder
3). Reboot the OnePlus 8T in fastboot-bootloader mode (Power and volume + and volume-)
4). Connect the OnePlus 8T to PC
5). Run flash-all.bat flasher
6). Wait until the process end
7). Voila! your OnePlus 8T will now boot into OxygenOS
POINTS TO REMEMBER
* "Invalid sparce file format at header magic" is not an error, you need to wait a bit when you see that string, just wait.
* These ROMs can't be used to update or downgrade your phone but just to restore your phone.
* This can’t be used to switch from ColorOS to OxygenOS you can use MSM unbrick tool to do that.
* !!! IMPORTANT !!!
Before flashing make sure you know about which type of ram your device supports i.e LPDDR4X/LPDDR5 as flashing wrong xbl config will hardbrick your device.
Here’s how you can check what type of ram your device has:-
Now, as to exactly find out which variant that you have, turn on USB debugging and enter this command:-
Code:
adb shell getprop ro.boot.ddr_type
If the value is 0, that means you have LPDDR4X. If the value is 1, that means you have LPDDR5.
This command is more reliable than the Devcheck and other apps.
DOWNLOAD:- https://sourceforge.net/projects/op8t-9r-fastboot-roms/files/
Click to expand...
Click to collapse
Thank you!!! I've been going crazy trying to use msm tool and it didnt work. Great job!

xin chào, sau khi tôi flash nó, điện thoại của tôi không khởi động được, màn hình đen

Can you make one for the new 8t global update 11.0.11.11

Is this for ddr4 or ddr5. Tells you to check but doesn't say specific.

Thanks for this! Came in clutch tonight, wish I had seen this about a week ago! lol

kjslabber said:
Is this for ddr4 or ddr5. Tells you to check but doesn't say specific.
Click to expand...
Click to collapse
I am wondering the same thing... i can see when I look in the folder the xpl_ld5 file and the other lp5 file... do I just delete those if I have the ddr4x version???

I found out, when you run the script it will ask which DDR you have. It's all good.

kjslabber said:
Is this for ddr4 or ddr5. Tells you to check but doesn't say specific.
Click to expand...
Click to collapse
Both

Thanks @HELLBOY017 .
It worked like a charm with just a single click.

Tmobile version?
Can this be used to convert the Tmobile version to some other variant ? MSM does not work for me

how do i fix no sim error on 8t?

This worked smoothly for me and fixed my bricking. Thanks very much.
I had some issues getting fastboot to recognise my device on Windows. Turns out, USB drivers are a bit of a hassle to install, but following this thread did the trick for me: https://forum.xda-developers.com/t/...owing-up-in-fastboot-mode-windows-10.4194491/

Oneplus 8 pro stuck on fastboot mode

Hi, folks!
I tried install LineageOS but something go wrong and my phone bricked. I read about MSM tool but I'm arch linux user i can't find alternatives for linux. Maybe someone help me figure out. Please don't judge me it's my first expiration with android.

I ran into the same issue when I flashed the OP8 rom over my OP8P tonight (Though not LineageOS), The following article seemed to help out.
[ROM][STOCK][FASTBOOT][OP8P] Stock Fastboot ROMs for OnePlus 8 Pro
Moderator Information This project is not under active development, take precautions when you are installing it. Things are changing with the advent of project treble and seamless updates. OnePlus will no longer release ROMs flashable via...
forum.xda-developers.com
I personally had to swap to my other slot using `fastboot --set-active=b` then using `fastboot reboot fastboot` to get into fastbootd for most of the commands to work. ( Fastbootd will be listed at the top of the screen )