Hi,
I have 2 problems.
1. Phone with 4G and WiFi enabled. Smart network switch is enabled. And there is 2 WiFi available. The phone is initially connected to WiFi A (5 GHz), which has similar strength as of B (2.4 GHz) and both are 5 bars. Then I move to another spot when A has 1-2 bars and B has 4 bars. The phone will remain connected to A and won't switch to B. I think there used to a setting to avoid WiFi with poor signal. But I can't find it any more. What could I do to make it auto-switch to B when A drops to 2 bars?
2. Tablet with WiFi only and no option for smart network switch. I have a set it up to auto connect to an open WiFi at a place and it works. However, when I leave that place, it will remains connected to it, even though it can no longer be found (miles away now). The WiFi tab should show it has 1 bar signal and it's connected. I have to manually connect to another WiFi. How could I fix this?
Thanks
Try WiFi Manager from Kostya Vasilyev at both problems. i believe it will help you
Since the last official update I'm always having problems when I turn on my wifi hotspot to use my other phone with the Zenfone Zoom Data.
When I turn it on it doesn't work, my connected devices show "no connection" when connected to the wifi hotspot, I manage to get it working always swearing while I reset the wifi and data settings, I turn on and off the data and the wifi hotspot. Sometimes I have to go to the VPN and re-tap on the correct VPN in use (that is already selected) and then the connection will stat working on my connected devices. Often I have to repeat those steps many times.
The other weird thing is that when I'm using the Zoom S as wifi hotspot, the connection on the phone itself stop working. It works only on the connected devices.
Never had those problems with previous android phones I had (several Nexus, a Note 3 and an Ulefone Power). I use the wifi hotspot really often since I still use my Note 3 and this is really frustrating.
EDIT Maybe I posted this in the wrong section. My mistake sorry. If some mod can move this I'll be glad.
try adding ",dun" to the access point types under the APN settings. I had a similar issue that fixed it.
Last week I used my Asus 3 Zoom to give my laptop internet by Wifi hotspot. Worked flawlessly.
Rate this thread to express how you think the Huawei MediaPad M5's Wifi performs. A higher rating indicates that it has excellent range, throughput, and signal strength. Like when you're taking a dump in the bedroom upstairs, do your videos have to buffer or do they come through without interruption?
Then, drop a comment if you have anything to add!
Wifi alone performs really well, but once you turn on bluetooth it becomes terrible. Download speeds of less than 1 mbps, barely usable.
@ZunsheV I cannot confirm the behavior you are describing. Having switched on bluetooth only without any traffic on it doesn't slow down the WiFi connection speed for me. It's a bit different when I am transferrring data over bluetooth in parallel or if bluetooth is scanning for devices. In those cases I can notice a slowdown, too.
Can more people chip in who bought m5? Does it have bluetooth/wifi problem? I plan on use it with bluetooth headphones so it would be major problem. I saw m3 had this problem.
I've got problems with the WiFi here, I've tested with Bluetooth speaker and gamepad with no slowdown at all
Sent from my CMR-W09 using Tapatalk
Using Wifi while connected to a bluetooth device slows downloads significantly.
I connected to my 5G wifi point and my Bragi headphones and it took several minutes to download a game from Google Play; turning off bluetooth and downloading a different game took only a few seconds (same wifi connection).
i'd go Samsung but the cheapest tablet with a fingerprint reader is running MARSHMALLOW (!).
I have no problems with bluetooth and wifi. No differences with bluetooth on and connected to my charge 3 and with bluetooth off. I have an M5 Wi fi only
I have the same problems. When the WiFi and Bluetooth is turned on, the speed falls dramatically.
I use WiFi 5 ghz router and Bluetooth jbl clip2.
No problems with my M5 8"LTE bluetooth or wifi, even when both are aktiv. Both works as it should.
edit: after some testing there is a "problem" with wifi speed 2.4Ghz when streaming music via BT, but not on 5Ghz.
Maybe not device relaited? Because my M2 8" LTE and my iPhone 7+ does the same
Hi everyone, how did you manage to get the mediapad m5 connected to 5ghz wifi, mine is not detecting any 5ghz wifi,
Zeryab23 said:
Hi everyone, how did you manage to get the mediapad m5 connected to 5ghz wifi, mine is not detecting any 5ghz wifi,
Click to expand...
Click to collapse
Probably you should try to change the channel of your router ...
Poor WiFi performance even when Bluetooth is off
I recently bought an Mediapad M5 and already next day i reclaimed it because of WiFi issues. At first start up i installed all availble system updates, restarted the Mediapad and checked WiFi performace. I noticed the downlink didnt gave me the normal speed as i have on my other devices (Galaxy TAB S, Galaxy S7 and Galaxy S9) and that was when all other connections as Bluetooth was switched off. I have an 250/100 MBit/s service from my ISP wich usually give me approx 245/100 MBits/s on the 5 GHz wireless network. The Medipad gave me 120/100 MBit/s (50 % downlink speed of what i am used to get) and poor latency in comparation to the others. I tried what was under my possibilitys to do, reset network settings and also as final a factory reset. Nothing of that solved the issues. So it was an easy decision to take and reclaim the Huawei Mediapad M5 crap mediapad and get the money back.
Furthermore there was other annoying issues on the Mediapad M5. It was not possible to use all of the apps i earlier bought from Google Play and are using on my old Galaxy TAB S and on my Galaxy S9. Apps for monitoring WiFi connection, e.g WiFi Overview 360 Pro and WiFi Analyzer - both are well reputation apps, didnt work properly on Mediapad M5 depending of Huaweis app regulations. Using these apps on the Mediapad M5 i was only allowed to see the network i was attached to. Nothing else. I spoked with Huawei support desk and they confirmed that Huawei have restrictions for what apps users are allowed to run on Huawei devices.
So if you are going to purchase a new tablet, make a proper consideration before you choose a Huawei Mediapad device.
Good on my M5 10.8
I use 5GHz wifi and bluetooth is always on (and connected sometimes), i still get a link speed equivalent to my desktop with a dedicated PCIE wifi card (867mbps) and with a case on it sometimes beats my desktop wifi speed.
Haven't tried bluetooth with 2.4GHz, it's slower yes, but i never noticed it, only 2.4GHz wifi ive used is out and about on public wifi and that's slow anyway (verify with my phone)
Also worth noting that i think my model might be a cellular model in disguise, it has the gyroscope which is exclusive to the cellular model, and a thermal sensor for the modem.
The WiFi / Bluetooth issue is not specific to this device. It happens on everything using the 2.4G WiFi band. Ise 5G and problem is gone.
edited because i cant delete
---------- Post added at 03:01 AM ---------- Previous post was at 02:46 AM ----------
Is using a USB bluetooth adapter over OTG an option?
You should have a good router for a stable 5ghz connection. I had dir-809. The signal was very unstable even in the same room a few meters away, the speed of my internet is 150 mbit, but ive got rarely above 90mbit, because of the 100 mbit wan port.
Now I'm using very cheap but much, much better tenda ac10 router. The signal is strong and stable even in the room next to the router, where i haven't signal before. The link speed on my p20 is 520-750 mbit, on the mediapad around 390-433 mbit. I've got 150 mbit internet speed (150 is the isp limitation.) I'd wish the tablet to support mu-mimo, but as i know only p20/p20 pro/mate 10 pro Porsche support the technology.
https://drive.google.com/file/d/1JpigHhjzodw6UEAbmRw8zQh6IE46OOfx/view?usp=drivesdk
Worst. 4 times less speed than before Turbo GPU and August Security Patch update. Avoid!
Edit: I panicked a little bit too much. After that I played with my router's 2,4Ghz and 5Ghz bands, divided it into two different wifi names, then connected to my M5. After everything - changed to that one wifi name with 2 bands. Now it's working as it should.
I get about half the speed on the M5 than i do with my Mate 10 or my desktop, with bluetooth off.
Also the wifi signal is good if you're in direct sight of the router and within 20 meters, once i go behind a wall i lose signal.
tmzbeme said:
I get about half the speed on the M5 than i do with my Mate 10 or my desktop, with bluetooth off.
Also the wifi signal is good if you're in direct sight of the router and within 20 meters, once i go behind a wall i lose signal.
Click to expand...
Click to collapse
Try working with your router - a change of channel number could solve the problem. Also, check if you connect to 5ghz band as this could get you nicer speeds.
There is significant speed decrease in wifi speed with Bluetooth on. It appears on 5ghz network too. With Bluetooth off i get around 200 mbit/s.
The problem doesn't appear on p20. I've got around 400 mbit/s with Bluetooth always on.
*happens only on my J2 Lte but not other devices connected to the same network
While connected to my home wifi router, the internet works fine on my Samsung J2 but when i reboot the router or the router loses internet for whatever reason, my J2 (while still showing wifi is connected) has no active internet connection.
(It does after a couple of hours but an active connection on my devices is needed at all times so cant wait that long)
After my router reboots, i have to manually go to my wifi tile on my device and turn it off and back on and then it connects and works like normal.
Rooted
Android 6.0.1
on5pro stock rom port for j2lte https://forum.xda-developers.com/galaxy-j2/development/on5pro-stock-j2lte-t3792985
Bumping this thread because still havnt found a fix for it.
What are some particulars why my G3 is suddenly getting intermittent wifi at a certain range when it's been in the same room for years and never had an issue? It was working fine before and now it cannot sustain wifi connection despite "showing" an initial max/good signal, especially when it starts initiating such as loading a video on YouTube. However, it works fine when in close range to the router which makes it confusing if it's the WiFi antenna hardware already or some sort of new interference.
tl;dr
1. Works fine when near the router. No connection loses. WiFi signal in my room is good/excellent regardless.
2. WiFi SSIDs show up, then remains SAVED, the says no internet, then randomly connects and works.
3. Connection drops the moment I open a YouTube video, load an app, etc. basically when there is loading involved.
4. Phone has been in my room for years so the range is good and consistent.
5. Other devices can see the WiFi connection just fine, it is just this phone recently that showed a problem suddenly. WiFi signal at good/excellent for every other device.
6. There are other WiFi SSIDs of neighbors but only around 3 or so and they've existed for a while already. We are also in the appropriate channel away from theirs via WiFi Analyzer.
7. The router signal strength is able to reach even up to the house beside ours in the garden.
What I tried:
1. Reset network settings via Backup and Restore.
2. Changed ROM.
3. Removed Blokada / VPN. Private VPN is off.
4. Turned on Airplane mode, then turned on WiFi.
5. Channel WiFi channel, router Mhz, connected to 5 Ghz.
6. Removed Bluetooth devices in the area, Bluetooth toggle at off.
7. Went near the router to connect, it's sustained, then walked over to the room, connection drops. Other devices sustain it.
I understand the phone is showing its years but curious what could be possible reasons for this new issue to appear.