I have an old Galaxy S4 that I purchased several years ago from FreedomPop. I'd like to put a custom ROM on the phone. I don't plan on placing the phone on any carrier's network. I'll just use it on WiFi for some personal tasks. I can't get the phone to boot to TWRP, so I can install a ROM. Below is what I've done. I hope someone can tell me what I'm doing wrong.
The phone is a Galaxy S4
Software Version: L720VPUGOK3
Hardware Version: L720.08
Device Name and Model Number: SPH-L720
Android Version: 5.0.1
I do have it in developer mode with USB Debugging turned on.
In the security settings, I do have Unknown Sources allowed.
I successfully used Odin to flash the "L720VPUGOK3_L720SPTGOK3_L720VPUGOK3_HOME.tar.md5" to the phone.
In the TWRP application on the phone:
I chose the device "Samsung Galaxy S4 Mini Sprint".
Back on the main screen, the "current device" shows as "serranoltespr"
I have downloaded the "twrp-3.6.2_9-0-serranoltespr.img" for flashing to the device.
Whether I try to flash it to recovery or boot, I receive the message, "Flash Failed!"
Notes:
When I run "Minimal ADB and Fastboot"
When I run "fastboot devices", nothing is returned (but I understand Samsung does not have a fastboot mode)
When I run "adb devices", I do receive "47d83255 device".
When I run the application "ReiBoot for Android" and select "One-Click to Recovery Mode"
the phone reboots to the screen shown in the attached image.
If any of these selections would help me, I'd love to know how to use it
After rebooting in recovery mode, "adb devices" in a command prompt returns nothing.
Any help getting TWRP to load, so I can install a custom ROM will be greatly appreciated.
SerenityNetworks said:
I have an old Galaxy S4 that I purchased several years ago from FreedomPop. I'd like to put a custom ROM on the phone. I don't plan on placing the phone on any carrier's network. I'll just use it on WiFi for some personal tasks. I can't get the phone to boot to TWRP, so I can install a ROM. Below is what I've done. I hope someone can tell me what I'm doing wrong.
The phone is a Galaxy S4
Software Version: L720VPUGOK3
Hardware Version: L720.08
Device Name and Model Number: SPH-L720
Android Version: 5.0.1
I do have it in developer mode with USB Debugging turned on.
In the security settings, I do have Unknown Sources allowed.
I successfully used Odin to flash the "L720VPUGOK3_L720SPTGOK3_L720VPUGOK3_HOME.tar.md5" to the phone.
In the TWRP application on the phone:
I chose the device "Samsung Galaxy S4 Mini Sprint".
Back on the main screen, the "current device" shows as "serranoltespr"
I have downloaded the "twrp-3.6.2_9-0-serranoltespr.img" for flashing to the device.
Whether I try to flash it to recovery or boot, I receive the message, "Flash Failed!"
Notes:
When I run "Minimal ADB and Fastboot"
When I run "fastboot devices", nothing is returned (but I understand Samsung does not have a fastboot mode)
When I run "adb devices", I do receive "47d83255 device".
When I run the application "ReiBoot for Android" and select "One-Click to Recovery Mode"
the phone reboots to the screen shown in the attached image.
If any of these selections would help me, I'd love to know how to use it
After rebooting in recovery mode, "adb devices" in a command prompt returns nothing.
Any help getting TWRP to load, so I can install a custom ROM will be greatly appreciated.
Click to expand...
Click to collapse
Hi, check my S4 Unified Collection & Guides.
@SPLESHER
Thank you. However, perhaps I'm not understanding the purpose of a custom ROM. I used Odin to restore the phone to the stock OS (L720VPUGOK3_L720SPTGOK3_L720VPUGOK3_HOME.tar.md5). My root access was lost, but looking at the "LineageOS on jfltespr" instructions, I saw that root was not required. So, I followed the instructions, installed LineageOS, and rebooted into recovery. I successfully received the 4 option prompt. At that point I didn't know what to do, so I chose the option to reboot. I did, but was only returned to the stock OS. I was thinking I would have a new OS that didn't contain the Google apps, but only a streamlined set of applications.
What gives? I'm trying to get rid of the FreedomPop OS and associated applications. Is this possible? If so, how do I go about it?
Note: The phone does not have a carrier plan. All I have is WiFi and USB access.
Thank you,
Andrew
PS. I wouldn't mind having a number of the Google apps and access to the play store. I followed the link to the GApps (MindTheGapps) pages and even downloaded the zip file, but I do not understand how to install it. But first things first. I'd like a fairly robust OS that gits rid of the FreedomPop stuff.
SerenityNetworks said:
@SPLESHER
Thank you. However, perhaps I'm not understanding the purpose of a custom ROM. I used Odin to restore the phone to the stock OS (L720VPUGOK3_L720SPTGOK3_L720VPUGOK3_HOME.tar.md5). My root access was lost, but looking at the "LineageOS on jfltespr" instructions, I saw that root was not required. So, I followed the instructions, installed LineageOS, and rebooted into recovery. I successfully received the 4 option prompt. At that point I didn't know what to do, so I chose the option to reboot. I did, but was only returned to the stock OS. I was thinking I would have a new OS that didn't contain the Google apps, but only a streamlined set of applications.
What gives? I'm trying to get rid of the FreedomPop OS and associated applications. Is this possible? If so, how do I go about it?
Note: The phone does not have a carrier plan. All I have is WiFi and USB access.
Thank you,
Andrew
PS. I wouldn't mind having a number of the Google apps and access to the play store. I followed the link to the GApps (MindTheGapps) pages and even downloaded the zip file, but I do not understand how to install it. But first things first. I'd like a fairly robust OS that gits rid of the FreedomPop stuff.
Click to expand...
Click to collapse
I don't know why you tag Splesher. I replied you xD
Check my guide to install custom recovery, then check my guide to install custom ROM. Everything is on the link above.
@Retrial , sorry. On my phone it appeared like splesher wrote the post. I now see it was you and his was a thumbs-up and you provided the information.
I'll take a look again at the material at the link you posted. But there is so much material and these are processes outside my experience. I confess I am kind of guessing what I need and what I need and what is unnecessary. I don't need all the Google Apps, but I might need access to the PlayStore. There are a few apps I want to install that I know are on the PlayStore. I don't know if there are other ways to get the apk files outside of the PlayStore. I don't necessarily need an OS that is constantly being developed. I just want a few working apps. I'll never be adding the phone to a carrier's network. I'll just be using WiFi. Knowing all this and that I just want to get rid of the FreedomPop OS and install a streamlined custom OS, would you mind just listing (in order) the high-level steps I need to perform?
Thanks,
Andrew
@Retrial UPDATE: I have...
Installed Bootloader and Modem
Installed TWRP (and can reboot to TWRP as needed)
Installed Magisk Root (and confirmed that I have successfully rooted the phone)
Now I have no clue what to do next. I just want a custom ROM that will get rid of the FreedomPop OS and let me install a few apps from the Google Play Store.
Thanks,
Andrew
SerenityNetworks said:
@Retrial UPDATE: I have...
Installed Bootloader and Modem
Installed TWRP (and can reboot to TWRP as needed)
Installed Magisk Root (and confirmed that I have successfully rooted the phone)
Now I have no clue what to do next. I just want a custom ROM that will get rid of the FreedomPop OS and let me install a few apps from the Google Play Store.
Thanks,
Andrew
Click to expand...
Click to collapse
No need to root if you don't want to.
So assume you are on TWRP, follow my clean installation guide.
Choose a custom ROM of your choice from my collection and follow my guide.
In TWRP wipe the mentioned partitions from my guide, format data, connect your device to pc while you are in twrp, transfer the rom and gapps and flash them.
Let me know which ROM you want to flash so I can tell you exactly the steps and which gapps to flash.
@Retrial Thanks. I have downloaded the zip files for "crDroidAndroid-11.0-20220915-jfltexx-v7.22" and "LineageOS++-19.1-V1.0". I don't know which would be best to use. Any suggestions? I can move the zip files to the SD card in the phone, but when in TWRP the phone does not appear in Windows File Explorer. I don't know why.
SerenityNetworks said:
@Retrial Thanks. I have downloaded the zip files for "crDroidAndroid-11.0-20220915-jfltexx-v7.22" and "LineageOS++-19.1-V1.0". I don't know which would be best to use. Any suggestions? I can move the zip files to the SD card in the phone, but when in TWRP the phone does not appear in Windows File Explorer. I don't know why.
Click to expand...
Click to collapse
If you have sd card you can move the files there. Make sure have samsung USB drivers installed for PC to recognize your device. (You can find them in my collection)
The LineageOS++ 19.1 is for POCO F1 not for S4. Do not flash that. Read carefully the tags and what you download.
You can choose between these:
Official LineageOS 18.1
Optimized LineageOS 19.1
Official crDroid 18.1
Official DivestOS 18.1
Let me know what you want to flash to tell you what GApps you need. But if you read my guide everything is there explained with details.
(I may answer you tommorow since it late here)
@Retrial I was able to successfully flash "Optimized-LineageOS-19.1-V7.0" and "MindTheGapps-12.1.0-arm-20220605_111643". Most functions with the new OS seem to be working well. However, installing and updating apps seems to struggle. Last night I started the install for four apps and Google Play said four apps needed updating. As of this morning only one application had been installed. The others continued to show "Pending..." I cancelled the seven remaining installs & updates, and retried with just one. It just stays at "Pending...". Thoughts on how I can get apps to install and update?
Also, one suggestion. In the steps I followed, I finally got to the bullet point "Flash ROM > GApps [Optional]", but I couldn't find instructions on how to perform the flash. I had to go to another site and tutorial on how to perform that step. If those instructions are provided in your guides, I didn't find them. Perhaps a hyperlink to them would help other users.
Thanks again,
Andrew
Related
The objective of this post is to explain how to currently install a custom ROM in our device. (for total newbies like me, you can also refer -among others- to my previous post). I give the general procedure which wipes everything in your device, but you can check various precious posts in xda that variate this procedure.
The codename for our device is "pollux_windy", which is the Wifi-only version. The LTE version (I should probably get the LTE!) is "pollux" and I suppose the general procedure (with the corresponding firmwares to your specific device) will work for any Xperia device. You can also get the general idea from this post.
As a general rule of thumb do not forget after/before every firmware flashing to:
Enable developer mode (explained here)
Enable the USB Debugging mode (explained here)
Trust installation from unknown sources (explained here)
Steps.
A. Unlock the bootloader.
You can refer here and then check that it is successfully unlocked with these steps (taken from here ):
Open the Contacts app.
Click the menu button.
Click Settings.
Long press (for about 5 seconds) somewhere in the empty space just above status bar, as indicated by the red frame in the screenshot below, and then release your finger. A button named Enter service code will then appear in the same area (this may take a few tries).
Click Enter service code. A dialler will appear.
Dial *#*#7378423#*#* . Then go to -> "Service Info" -> "Configuration". If there is:
Bootloader unlock allowed - Yes << this means that your Bootloader is Locked
Bootloader Unlocked - Yes << this means that your bootloader is unlocked
B. Flash a firmware in which you will root the device
Download/install FlashTool.
Download and place to the FlashTool's folder "firmwares" the firmware "SGP312_10.5.A.0.230_VMo UK_IE.ftf". More information here . In sort, download and extract http://d-h.st/MrI and http://d-h.st/ULc
Open FlashTool and connect the powered-off device (USB cable) in Flashmode, holding the Volume Down button while you plugin the usb cable. The FlashTool should say that it is connected in Flashmode. Then flash the 10.5.A.0.230 firmware in it.
C. Gain root to the new firmware
Open the device, complete the setup wizard and connect to a wireless network. You do not have to setup the Google Account since you can download every application googling the respective APK files, but Google Play is easier to use.
Get (click λ) the towelroot APK, install it and run it (click "make it rain"). You should have root, which you can check with a Root Cheker like this one.
Download/Install SuperSU APK (this is actively developed, while SuperUser is abandoned at the moment) as described here.
D. Install a Recovery to easily flash new ROMs
NUT has done excellent work with XZDualRecovery.Follow the instructions for installing it in his thread. In short:
Download the installer, run it and follow its instructions.
Select SuperSU and of course grant access to your computer from your tablet (watch the tablet screen).
E. Download a Custom ROM and Google Apps
I had problems with Cyanogenmod (versions 11 and 12) that I cannot explain. I had no GPS and no media sound from the speakers, but I did have "notifications" sound! I could listen to "media" sounds using headphones, though. So I tried the nightly OmniROM which seems very stable and fast at the moment, with no sound problems and also has a working GPS! You can get it directly from their site (the NIGHTLY I downloaded is omni-4.4.4-20150223-pollux_windy-NIGHTLY.zip which runs just fine). Somewhere I read that PacMan ROM - also works perfectly but I have not tested it yet.
I had device recognition problems from the Recoveries ("Status 7 Error") that I think dear NUT will solve promptly. What I did to solve them is
Upack the ROM zip.
Remove the first line (from assert(...); till the column) of META_INF/com/google/android/updater-script and save the file.
repack the ROM to a zip.
Then copy this zip to your external SD card. If you need google apps (you probably do, to use Google Play instead of other applications like Aptoide), you will also need to download and place to your external SD card the corresponding google apps from here - (I found it in this post - which also explains the different gapps versions)
F. Install the Custom ROM
So now that both the ROM and (optionally) gapps are in the device's SD card:
Enter the Recovery while repeatedly pressing Volume Up or Down while the device boots.
Wipe everything (except the external SD card, obviously --- if you delete the zip files by mistake you must begin again from step B. using the FlashTool to flash the *.230* ftf).
Reboot and setup/enjoy your new ROM.
It seemed that with OmniROM I had lost root access so I had to reinstall SuperSU. I did this by downloading the flashable/installable zip - and flashing/installing it through the recovery.
In the end a did a full backup with the TWRP recovery and one with Titanium backup
Magnus_E said:
The objective of this post is to explain how to currently install a custom ROM in our device. (for total newbies like me, you can also refer -among others- to my previous post). I give the general procedure which wipes everything in your device, but you can check various precious posts in xda that variate this procedure.
Click to expand...
Click to collapse
For installing customs (CM/AOSP/GPe based ROM's), you don't need to install .230 firmware, furthermore you don't need root (except for backup TA procedure), furthermore you don't need XZDualRecovery (cause it works only for Stock and Custom STOCK based rom's - see this post).
So you you only need to flash kernel via fastboot, and then enter recovery (integrated in kernel), and install .zip with custom, SuperSU and Gapps from there.
hello i was following this guide but im stuck on status 7 error, i tried deleting assert but the twrp recovery dont get any answer to "getprop ro.product.device" and it just doesnt proceed...
and Rootk1t i cant find any kernels flashable via fastboot or flashtool can you point one to me? all of the kernels i see are in '.zip's .... i want to have android 6.0 so i think i should have black kernel but how?
bluealef said:
hello i was following this guide but im stuck on status 7 error, i tried deleting assert but the twrp recovery dont get any answer to "getprop ro.product.device" and it just doesnt proceed...
and Rootk1t i cant find any kernels flashable via fastboot or flashtool can you point one to me? all of the kernels i see are in '.zip's .... i want to have android 6.0 so i think i should have black kernel but how?
Click to expand...
Click to collapse
.zips are installed through recovery, .ftf through flashtool.
6.0.1 ROM you can find here.
Hello guys.
I have successfully ported TWRP 3.0.0-0 for our Smart Prime 6.
It's 100% working !!
There are NO BUGS !! :good:
DOWNLOAD
NEW LINK: DOWNLOAD
________________________________________
How to install
Via app:
1) Download TWRP 3.0.0-0 from the link above and place it on internal storage of your phone.
2) Download Flashify app from Google Play Store.
3) Open Flashify app.
4) Grant root permissions.
5) Click "Recovery image" and then click "Choose a file"
6) Navigate to the folder where you placed TWRP 3.0.0-0 and choose the .IMG file.
7) Press "Yup!" button and wait.
8) After a while the phone will require reboot. So click "reboot" button.
9) Phone will reboot and automatically boot into TWRP, so you can press reboot to system.
10) Enjoy!
Special thanks to Oneb1t for modded .fstab file! :highfive:
edit: you can use Flashfire app too instead of Flashify, but it's not recommended, because the latest version of the Flashfire app is not flashing properly.
Brilliant! Thank you so much! Do you know any custom ROM what is better than the factory ROM?
There is no custom ROM for this phone yet.
But I'm trying to make LITE ROM.
Adreno306™ said:
There is no custom ROM for this phone yet.
But I'm trying to make LITE ROM.
Click to expand...
Click to collapse
Do you think it's easier/possible to adapt a ROM from a similar device like say, the Alcatel
Pop 2 (5) Premium ? I don't know if there's any ROM for that phone tho, but since it's branded as Alcatel you might get more support from the community here than by using Vodafone's name.
Hello, Demonlord6.
I have tried to make a stock flashable ROM via dumping the system folder and the boot.img file, but without success.
It does not boot properly.. when I tried to flash it without dalvik/system wipe everything was as before.
When I tried to wipe /system and dalvik first and then flash the ROM, it causes bootloop.
So now I'm trying to fix this issue..
I don't know where the problem is.
So when this issue will be solved I will try to build a ROM from Alcatel phones with same specs.
Adreno306™ said:
Hello, Demonlord6.
I have tried to make a stock flashable ROM via dumping the system folder and the boot.img file, but without success.
It does not boot properly.. when I tried to flash it without dalvik/system wipe everything was as before.
When I tried to wipe /system and dalvik first and then flash the ROM, it causes bootloop.
So now I'm trying to fix this issue..
I don't know where the problem is.
So when this issue will be solved I will try to build a ROM from Alcatel phones with same specs.
Click to expand...
Click to collapse
Hey, Andreno306
I don't know much about Rom's in that level of expertise I'm afraid :/ but I did some digging and came across this simple tutorial on XDA:
http://forum.xda-developers.com/showthread.php?t=2387941
I imagine it does not work for every single device out there, at least not with modifying stuff after, but it might be a good starting point I think, in fact I would try to actually make one myself had I a working PC currently at home. But even if I did I had no way of testing it because this is currently my daily driver phone.
Just wanted to say that I'm also very interested in getting a slim ROM for this device. I can't offer any expertise I'm afraid! Just wanted to show that there are people interested in your project.
:highfive:
Stock Kernel
Thanks, it works great.
This is little off-topic but does anyone has the stock kernel, i flashed NeoKernel but it is not that good and i forgot to make a backup do can anyone please link me to the stock kernel?
vojta_horanek said:
Thanks, it works great.
This is little off-topic but does anyone has the stock kernel, i flashed NeoKernel but it is not that good and i forgot to make a backup do can anyone please link me to the stock kernel?
Click to expand...
Click to collapse
I have one
https://mega.nz/#!tMJD3B4T!f6m2ELYCVupqGCcN2aGbkrNzEqijLu7au-7usEfeVL0
But I recommend to restore it with the flashify app, because that's how the backup was made.
If, for some reason, you don't/can't restore it, then you can always try Sugar on the PC which basically restores everything to factory settings (recovery, kernel, etc, it all gets reset)
Demonlord6 said:
I have one
But I recommend to restore it with the flashify app, because that's how the backup was made.
If, for some reason, you don't/can't restore it, then you can always try Sugar on the PC which basically restores everything to factory settings (recovery, kernel, etc, it all gets reset)
Click to expand...
Click to collapse
Restored and my phone keeps turning off after boot(once i saw the turn off screen, other times it just vibrates at boot screen), isnt it the wrong file? (flashed wia flashify)
I was able to restore the boot from TWRP (lucky i made a backup this time)
vojta_horanek said:
Restored and my phone keeps turning off after boot(once i saw the turn off screen, other times it just vibrates at boot screen), isnt it the wrong file? (flashed wia flashify)
I was able to restore the boot from TWRP (lucky i made a backup this time)
Click to expand...
Click to collapse
Sorry there about the bootloop but glad u could restore it from TWRP, maybe it was because we have different ROM versions ?
Demonlord6 said:
Sorry there about the bootloop but glad u could restore it from TWRP, maybe it was because we have different ROM versions ?
Click to expand...
Click to collapse
I got this one: http://www.needrom.com/download/vodafone-smart-prime-6-vf-895n-debloatedclean-stock/#
vojta_horanek said:
I got this one: http://www.needrom.com/download/vodafone-smart-prime-6-vf-895n-debloatedclean-stock/#
Click to expand...
Click to collapse
Yeap, that's not the same version as my ROM, mine is not 130FNN etc. Maybe that's why it didn't work
Enviado do meu GT-S5280 através de Tapatalk
Sorry for the stupid question but... does it works on Smart Prime 7 too?
Has anyone installed that linked ROM? It seems to be what we are looking for... a slim debloated rom.
I presume we need to be rooted, install this TWRP, then flash that ROM?
It mentions unlocking the bootloader, I dont think I've seen any info anywhere about unlocking the bootloader.
Can anyone give a quick lowdown on all the steps required to install that ROM please?
Hi everyone, I discovered that Elephone Trunk and Smart Prime 6 have (almost) identical specs: https://www.devicespecifications.com...ison/c584481c6
So it would be great to "port" (or build ?) the official Nougat-OmniROM for Trunk to VF-895N: http://dl.omnirom.org/trunk/
Last but not least, here's official Vodafone Smart Prime 6 sources: Vodafone_Smart_prime_6_20150413.tar.xz
TWRP for vodafone smart max 4 990N (coolpad 8890u).
I tried this recovery image for vodafone smart max 4 990N (coolpad 8890u).
The phone is in a bootloop state. I think i have usb debugging enabled already.
So, in fastboot mode i can see the device in my pc in adb fastboot cmd.
Im trying to ''fastboot boot recovery.img" but it stops in ''booting..''.
Dont know whats the problem but for sure i can not find a specific twrp image for this device.
If i enter fastboot oem device-info it says ''(bootloader) Device unlocked: true''.
Any ideas ?
hi i was wondering if you could share how you did this or if you can make one for the Vodafone smart n9 (VFD720) it would help a lot of people out looking for this
Needed to root a Vodafone Smart Prime 6 (VF 895N) (got it from a friend because it became unresponsive from all the updated google play stuff ) to get linux-deploy running. Just wanted to leave a big thank you here for Adreno306 for his TRWP 3.0.0-0. it did the job very well!
Only the procedure to get it installed differed quite a bit for me, since Flashify is no longer available.
I wanted to preserve boot and just flash trwp to recover, what worked quite well.
The first thing I did was to boot the phone manually in recovery mode (Power+Vol up) and reset it to factory settings from there. It takes a little while. Then follow the setup, go to phone settings, enable developer mode and set usb debugging. If "unlock oem" is not available there, reboot into recovery again, set unlock there and reboot into bootloader.
The prerequisites are adb and fastboot, both must work. Means adb devices and fastboot devices must show the phone. What can make problems under win10 as it sometimes does not detect the phone in bootloader mode. An actual google usb driver is needed, as provided by google.
For me adb worked well, but when rebooted into bootloader with adb reboot bootloader, fastboot didnt detect the phone. With the phone still connected, the windows device manager showed an unknown device with and exclamation mark (!). Right click, install driver, select driver manually, select driver from device list, mark all devices (first entry) and click "disk", then point to the usb driver director and select "ADB fastboot driver". ( A more comprehensive description is available here )
Once adb and fastboot detect the device, it is time to prepare it. Boot to system (normal operation) first. Make sure that the TRWP 3.0.0-0.img is renamed to trwp.img and then
adb reboot bootloader
fastboot devices
fastboot oem unlock
fastboot boot trwp.img
Now the phone should show the trwp menu, set it up to root the phone and install SuperSU. Reboot into bootloader and
fastboot flash recovery trwp.img
fastboot reboot
Verify with adb reboot recovery, you should see trwp now. Reboot to system.
Now finally go into the app selector, start SuperSU, and root the phone. SuperSu uses trwp recovery mode to install its image and root is done.
Again, big thanks for providing the TRWP image!
Adreno306™ said:
Hello guys.
I have successfully ported TWRP 3.0.0-0 for our Smart Prime 6.
It's 100% working !!
There are NO BUGS !! :good:
DOWNLOAD
NEW LINK: DOWNLOAD
________________________________________
How to install
Via app:
1) Download TWRP 3.0.0-0 from the link above and place it on internal storage of your phone.
2) Download Flashify app from Google Play Store.
3) Open Flashify app.
4) Grant root permissions.
5) Click "Recovery image" and then click "Choose a file"
6) Navigate to the folder where you placed TWRP 3.0.0-0 and choose the .IMG file.
7) Press "Yup!" button and wait.
8) After a while the phone will require reboot. So click "reboot" button.
9) Phone will reboot and automatically boot into TWRP, so you can press reboot to system.
10) Enjoy!
Special thanks to Oneb1t for modded .fstab file! :highfive:
edit: you can use Flashfire app too instead of Flashify, but it's not recommended, because the latest version of the Flashfire app is not flashing properly.
Click to expand...
Click to collapse
Hi, I would like to try your tutorial but I can't root this phone (which is an important step in the tutorial), is there any way someone could help me??
Thanks
Hi all,
How are you?
I've been looking at these forums for most of the day, though am still quite confused. If someone could assist to clarify it would be much appreciated (as I would like to avoid to brick my phone).
I'm currently running Stock Android, Marshmallow version 6.0.1 with the 1 November 2016 Security Patch.
The model of my phone SM-G900I (Australian edition).
So I've come across the following links with the instructions on how to root and install recovery, though quite confusing.
http://forum.xda-developers.com/show....php?t=2699648
Recovery Query?
I understand that you need to download the Samsung Drivers and Odin.
I've downloaded the TWRP files for my phone - twrp-3.0.2-2-klte.img.tar and twrp-3.0.2-2-klte.img.tar.asc
Do I need to use the twrp-3.0.2-2-klte.img.tar.asc file at all?
Root Query
Is the towelroot method of rooting the S5 still relevant. The reason I ask, is that when I had posted an initial question on the XDA assist, I was advised that this may not work.
If the towelroot method is no longer relevant, would the CF-Autoroot method below work?
http://forum.xda-developers.com/show....php?t=2696537
If neither of the above methods work I have seen mentions of "flashing root" via TWRP.
Are there any known instructions on how to do that on XDA or any other website?
Or is it just a matter of obtaining the superSU zip file from https://download.chainfire.eu/696/supersu/ and flashing it?
The other information seems straight forward re using the Samsung Tool to backing up the device and the EFS .
Any help would be much appreciated.
Thank you.
just flash the .img file in download mode, and dont use the asc file at all. also dont use twrp 3.0.2-2, just use 3.0.2 (not 3.0.2-1 or 3.0.2-2 as they can be pretty buggy). Towelroot has long since become irrelevant back in the 5.0 days unfortunately so all you need to do is find the appropriate supersu.zip file and put it on your phones sd card (either internal or external), boot into recovery an install that zip via TWRP then reboot. Should be good to go. The classic "root via recovery" method
Paul_Lunardi said:
Hi all,
How are you?
I've been looking at these forums for most of the day, though am still quite confused. If someone could assist to clarify it would be much appreciated (as I would like to avoid to brick my phone).
Recovery Query?
I understand that you need to download the Samsung Drivers and Odin.
I've downloaded the TWRP files for my phone - twrp-3.0.2-2-klte.img.tar and twrp-3.0.2-2-klte.img.tar.asc
Do I need to use the twrp-3.0.2-2-klte.img.tar.asc file at all?
Root Query
Is the towelroot method of rooting the S5 still relevant. The reason I ask, is that when I had posted an initial question on the XDA assist, I was advised that this may not work.
If the towelroot method is no longer relevant, would the CF-Autoroot method below work?
http://forum.xda-developers.com/show....php?t=2696537
.
.
Click to expand...
Click to collapse
1. Plug in your phone and let the drivers load.
If phone unrecognized then head to Playstore you can find loads of apps for drivers
2.unplug your phone and turn it off
3.Load odin.
Some versions of Odin are outdated. So watch for that.
4.Holding your turned off phone. Hold the volume down power and home buttons. Done correctly it should bring you to a page saying custom Roms can damage your blah blah. Volume up to continue down to reboot. Plug your phone in then Push volume up if you feel ready to Join us Oh Padawan.
Now I am sorry for the lengthy information, most likely you have already gotten to this point, but I just want to make the same page for you and future readers. No point in asking a bunch of potentially irrelevant questions when one explanation is sufficient.
5. Odin should find your phone which will be represented by a lit up colored square on the left side indicating a Com:value# which number is of little consequence just tells you which port it found it at. Do not dwell on this.
6. Using an extraction program such as .7z take your CF auto root .Tar file, not the .Asc, and extract. You should be able to find an file with ap in the extension.
7.Take the path from the URL bar of this window including the name of the ap file and copy it over to Odin. In Odin you will see the place to put it is represented by AP.
8. CLICK START AND WAIT WITH JEOPARDY MUSIC.
9. IT MAY REBOOT A FEW TIMES BUT UNTIL IT SAYS success OR FAIL IN ODIN DO NOT TOUCH.
10. Repeat steps 7-9 for twrp.img
10. Now taking this was a success turn your phone off. Unplug and holding volume UP power and home Gets you into twrp recovery. If all is well you can reboot into system. Ignore the kernel warning.
^^^^^ theres the long explanation LoL ^^^^^^^^ i disagree with step 9, but meh
Hi all,
Thanks for the detailed instructions.
So it appears that you can perform the task in 2 ways, ie
* By initially flashing TWRP first using Odin (whilst phone is in download mode), then running the TWRP and then copying over the supersu file to the sd card, then flashing this.
Or alternatively, following the above steps which first
* roots the phone by using Odin within download mode and the "cf auto root" file. Then once again using odin and flashing the TWRP file via odin.
This is my understanding.
Please let me know if I've misunderstood, otherwise thanks all. I'll be giving it a try soon.
My eventual goal is to install the Resurrection Remix Rom, so fingers crossed.
Paul_Lunardi said:
Hi all,
Thanks for the detailed instructions.
So it appears that you can perform the task in 2 ways, ie
* By initially flashing TWRP first using Odin (whilst phone is in download mode), then running the TWRP and then copying over the supersu file to the sd card, then flashing this.
Or alternatively, following the above steps which first
* roots the phone by using Odin within download mode and the "cf auto root" file. Then once again using odin and flashing the TWRP file via odin.
This is my understanding.
Please let me know if I've misunderstood, otherwise thanks all. I'll be giving it a try soon.
My eventual goal is to install the Resurrection Remix Rom, so fingers crossed.
Click to expand...
Click to collapse
the cf auto root file usually isnt necessary, nor is flashing supersu really as the newer twrps have the root function built right in. Itll ask you if you want to enable superuser rights the first time you boot into it. Just swipe right and its rooted. Alternatively, flashing supersu from within twrp or the cf auto root also work. CF is the acronym for the dev ChainFire, he is the man (or she, and conversely "the woman" or whatever LOL)!! But the crux of what you need is twrp installed, from there youre usually set. Get rooted, make a nand of your stock setup and flash away. Also, id make sure to download the stock tar.md5 file of your phones firmware in case all goes awry (or to hell in a handbasket or enter clever euphemism for stuff going bad here) so you can flash the stock tarball in Odin if you get stuck in an endless bootloop and your stock restore file doesnt work. Also, when resoring from AOSP to TouchWiz or vice versa, does require a few boxes to be checked for it to work, but it happens all the time. Happy flashing and feel free to ask away if you run into anything man!
Thanks all for clarifying.
I did have some difficulties along the way though I did successfully install twrp.
So I downloaded one of the latest versions of odin on mums computer. Laiche the twrp tar file in the ap section. Loaded it then restarted the device. Ran recovery though it was still the default android recovery ie it appeared as though nothing had changed. I looked at another forum which suggested to turn ooff the auto reboot option in odin and perform a battery pull and then launch directly into twrp. This actually worked after much agony.
I then loaded a superuser zip and flashed it onto the phone.
Rebooted confirmed that the phone was rooted.
I then relaunched the twrp recovery and ran a nand? backup of my device. Then I attempted to install a custom rom ie resurrection remix. Unfortunately it did load though the screen appeared to freeze after boot and was therefore unusable. Thank goodness the restoring of the backup worked.
I'll reattempt the installation of a custom rom very soon. Fingers crossed.
Thanks.
Hello dear Community!
It is depressing that my first appearance here is to ask for help, but I am going crazy.
So, I tried to Root my phone via Odin + CF Autoroot klte and it seemed to have been a success.
The root checker also said, that my device was rooted so I went on and installed TWRP to be able to install Lineage OS.
After getting Lineage to work I got a few error messages suddenly popping up, telling me that either "Music had stopped" or other android operation were closed because they didn't work properly.
I tried to install Gapps, it seemed to have worked but I was only able to open and enter the store once, afterwards the store never managed to load and then the app closed itself after starting it.
So I checked again with Root Checker, but this time it gave me an error message, too. It said, that my device was not rooted properly.
I guess this is were I made it worse by deciding to just root the phone again. Obviously, it didn't work either.
Afterwards I thought that maybe installing The Original Android OS and then unrooting the phone would be the best solution to be able to start anew.
First I tried to flah Lineage again and that made it impossible for me to boot the phone. The farthest I got was the setup page, were it tells you Hello and were you can choose a Language, but clicking the arrow key didn't do anything at all.
The recovery mode was also not the TWRP one anymore, but the original Android one and that was a huge problem for me.
Then I tried to flash the 6.1 OS for the S5 (I made sure it was the correct version), but now it is stuck at the "Samsung" screen while it boots.
It never boots though.
I don't know what to do anymore.
Please, I beg you, could anyone help me out?
Don't flash the latest Lineage OS ROM
Hello AsylumAlice u shouldn't have flashed the latest Lineage OS ROM because now u will need a new motherboard for your S5 since the ROM corrupts the MMC chip now u will need to get a new MMC chip or a new Motherboard sorry that your s5 is now hard bricked but when u get it fixed flash the DreamUX S8 Rom it works flawless on my S5 SM-G900i
Yours Sincely
Matty Bourke
mattybourke1994 said:
Hello AsylumAlice u shouldn't have flashed the latest Lineage OS ROM because now u will need a new motherboard for your S5 since the ROM corrupts the MMC chip now u will need to get a new MMC chip or a new Motherboard sorry that your s5 is now hard bricked but when u get it fixed flash the DreamUX S8 Rom it works flawless on my S5 SM-G900i
Yours Sincely
Matty Bourke
Click to expand...
Click to collapse
What are the grounds for your claims?
You needn't root via CF-autoroot if your end goal was to flash lineage. CF autoroot was intended to root stock roms with ease and less effort.
Flash The LATEST, official TWRP via odin then do a FULL WIPE. Wipe system, data, cache and dalvik cache.
From here on, you have two options:
1.) Sideload the LineageOS rom via ADB
2.) Transfer it to the phone's storage via MTP and flash it from TWRP.
As for how to accomplish this, the forum search bar and Google has your back. You need only choose one procedure.
If you need the Play Store, flash gapps AFTER flashing LINEAGE AND BEFORE REBOOTING.
Since you were under the idea that utilizing CF-autoroot was a necessity, I suggest that you re-read this post thoroughly before actually putting it into practice.
Kinloch said:
What are the grounds for your claims?
You needn't root via CF-autoroot if your end goal was to flash lineage. CF autoroot was intended to root stock roms with ease and less effort.
Flash The LATEST, official TWRP via odin then do a FULL WIPE. Wipe system, data, cache and dalvik cache.
From here on, you have two options:
1.) Sideload the LineageOS rom via ADB
2.) Transfer it to the phone's storage via MTP and flash it from TWRP.
As for how to accomplish this, the forum search bar and Google has your back. You need only choose one procedure.
If you need the Play Store, flash gapps AFTER flashing LINEAGE AND BEFORE REBOOTING.
Since you were under the idea that utilizing CF-autoroot was a necessity, I suggest that you re-read this post thoroughly before actually putting it into practice.
Click to expand...
Click to collapse
Thank you so much for your fast reply!
-> I flashed the newest Version for klte via Odin, but I can't get into the boot mode.
I only am able to enter the download mode. What can I do now?
Flash TWRP via odin again, untick the Auto-Reset option of Odin first. Then try booting to recovery via long holding the power, home and volume up button simultaneously without releasing any of the buttons until you successfully see the TWRP splash screen.
If that still doesn't work, reboot to recovery via adb from download mode. You need the adb and the usb drivers for your device.
If that still doesn't work, you might have flashed an incompatible version of TWRP.
Kinloch said:
Flash TWRP via odin again, untick the Auto-Reset option of Odin first. Then try booting to recovery via long holding the power, home and volume up button simultaneously without releasing any of the buttons until you successfully see the TWRP splash screen.
If that still doesn't work, reboot to recovery via adb from download mode. You need the adb and the usb drivers for your device.
If that still doesn't work, you might have flashed an incompatible version of TWRP.
Click to expand...
Click to collapse
Thank you so much, it worked perfectly!
I can now start my phone and use it normally.
But the Root Checker still says:
"Sorry! Root access is not properly installed on this device.
Device: SM-G900M
Android version: 7.1.2"
What should I do from now on?
Thank you so much for your help (agaiN).
And as for why I used the auto-root, well I just followed a guide that I found, it only had positive reviews so I assumed it was a correct tutorial.
AsylumAlice said:
Thank you so much, it worked perfectly!
I can now start my phone and use it normally.
But the Root Checker still says:
"Sorry! Root access is not properly installed on this device.
Device: SM-G900M
Android version: 7.1.2"
What should I do from now on?
Thank you so much for your help (agaiN).
And as for why I used the auto-root, well I just followed a guide that I found, it only had positive reviews so I assumed it was a correct tutorial.
Click to expand...
Click to collapse
just flash supersu in twrp
AronFerr said:
just flash supersu in twrp
Click to expand...
Click to collapse
I thought about doing that, but wasn't sure how exactly to proceed and what Version to install.
I downloaded SuperSU v.2.82 and put it on my internal storage.
Just install over TWRP the same way that I Installed Lineage and Gapps I suppose?
I guess if it doesn't work out, I just follow the steps from above again and retry?
Thank you so much. I feel like in idiot in this situation.
AsylumAlice said:
I thought about doing that, but wasn't sure how exactly to proceed and what Version to install.
I downloaded SuperSU v.2.82 and put it on my internal storage.
Just install over TWRP the same way that I Installed Lineage and Gapps I suppose?
I guess if it doesn't work out, I just follow the steps from above again and retry?
Thank you so much. I feel like in idiot in this situation.
Click to expand...
Click to collapse
yes just flash it but no wipes
Hey guys, this is my first post. I just bought a Samsung SM-T510 and would like to unlock all the features. I'm currently trying to follow multiple guides on how to do so. To my understanding, my best bet is lineageOs 16. I've been following https://forum.xda-developers.com/gal...-16-0-t3987317 alongside with https://forum.xda-developers.com/gal...howto-t3989361 and I'm pretty confused on the method order i need to follow. What I mean is do I install rom first, TWRP, Magisk etc.?
More guides ive been following:
https://forum.xda-developers.com/gal...-10-1-t3934805
https://forum.xda-developers.com/app...mless-t3473445
https://topjohnwu.github.io/Magisk/i...system-as-root
I see posts saying I need and don't need Multidisabler so I'm confused on what I actually need: https://forum.xda-developers.com/gal...ption-t3963020
Another one: https://forum.xda-developers.com/gal...ption-t3919714
https://forum.xda-developers.com/gal...eries-t3918699
I have so many tabs open currently; I know I'm missing a few important ones.
So given all that info, i think i have all the software to do this between kernels, rom, twrp, odin, magisk, multi disabler? and i think thats all.
My sm-t510 build number is T510XXU2ASK5, looking through the lineage rom guide, I click the link https://samfrew.com/model/SM-T510/ and i see different versions. I'm honestly completely confused about this file and how I'm going to use it. I understand it to be the stock rom? as in factory software? With TWRP too, the numbers don't match my current build number leaving me very confused.
Do I need to downgrade my build number (i don't know if it's even a thing just asking)?
I think i can do everything relatively easy once I have an understanding of what to do first (order of things) and the specific files for the specific steps. When I'm reading these guides, I honestly have no idea which download goes for what. For ex. going back to https://forum.xda-developers.com/gal...-16-0-t3987317 like what do I need to download, the build number listed in notes regarding kernel or go to the download section right below and use that? Or both and if both, how do I use them separately for there a specific purpose? I cannot find anything that makes me feel comfortable rooting/custom rom on my device. Not comfortable in terms of I don't know what I'm doing exactly. I have put days of reading into this and still, I cannot figure out how to do this. I would really appreciate it if someone could help me. This is stressing me out and I would like to get this done before Monday due to me having some serious surgery. The reason being; I won't be as fresh on everything I've read recently.
I'm sorry if this post is choppy and all over the place. I'm just exhausted and clueless at this point. If I left any info out in order for someone to help me please let me know so I can provide it.
EDIT: The TWRP file ends in build number SK1, the file lineage-16.0-20191019-UNOFFICIAL-T510XXU2ASI4.tar.md5 doesn't match the TWRP file as well as my current build number; which ends in SK5. So nothing is matching the 3 last characters in my build number across all guides besides the samfrew link.
Also, I keep seeing i need a .tar TWRP file for recovery (?) but when I unzip both files are .img (named boot/recovery)
You don’t unzip the .tar files. Keep them as is.
secretwolf98 said:
You don’t unzip the .tar files. Keep them as is.
Click to expand...
Click to collapse
I don't get a .tar file until I unzip the folder; I get a filed with .tar.md5
My recommendation would be to first upgrade to T510XXS2ASK1 of the OEM firmware, since that's the latest version for which Samsung has published kernel source. Use the latest release of Odin and install BL, AP and HOME_CSC. After this, unlock the bootloader and prevent VaultKeeper from relocking it by always enabling Debugger Options while connected to the Internet after a factory wipe.
From there, you could just install TWRP, install the latest MultiDisabler, and live with the Samsung firmware. You could even install Magisk to root. However, I prefer a clean Google OS without all the OEM bloatware, so I'd recommend installing the latest Nexus Stock (which includes TWRP and the custom kernel that disables Knox boot security features). Again, use Odin and install it to AP and do a factory wipe in TWRP because file-based encryption is still unsupported on these custom ROMs.
You could install LineageOS instead, but I haven't yet updated that for T510XXS2ASK1. I've just been busy and Andy hasn't been releasing any new LineageOS 16 GSIs. We're also pretty close to releasing a LineageOS 17 build.
fountainb234 said:
I don't get a .tar file until I unzip the folder; I get a filed with .tar.md5
Click to expand...
Click to collapse
Just rename the file cutting off the .md5.
is it possible to downgrade from sk5 to sk1? you cannot upgrade to a later version, and I know downgrading can have reverse effects on the tablet. I have same tablet I would like to know. if I flash sk1 is there a way to fix it if it bricks?
Magendanz said:
My recommendation would be to first upgrade to T510XXS2ASK1 of the OEM firmware, since that's the latest version for which Samsung has published kernel source. Use the latest release of Odin and install BL, AP and HOME_CSC. After this, unlock the bootloader and prevent VaultKeeper from relocking it by always enabling Debugger Options while connected to the Internet after a factory wipe.
From there, you could just install TWRP, install the latest MultiDisabler, and live with the Samsung firmware. You could even install Magisk to root. However, I prefer a clean Google OS without all the OEM bloatware, so I'd recommend installing the latest Nexus Stock (which includes TWRP and the custom kernel that disables Knox boot security features). Again, use Odin and install it to AP and do a factory wipe in TWRP because file-based encryption is still unsupported on these custom ROMs.
You could install LineageOS instead, but I haven't yet updated that for T510XXS2ASK1. I've just been busy and Andy hasn't been releasing any new LineageOS 16 GSIs. We're also pretty close to releasing a LineageOS 17 build.
Click to expand...
Click to collapse
fountainb234 said:
Hey guys, this is my first post. I just bought a Samsung SM-T510 and would like to unlock all the features. I'm currently trying to follow multiple guides on how to do so. To my understanding, my best bet is lineageOs 16. I've been following https://forum.xda-developers.com/gal...-16-0-t3987317 alongside with https://forum.xda-developers.com/gal...howto-t3989361 and I'm pretty confused on the method order i need to follow. What I mean is do I install rom first, TWRP, Magisk etc.?
More guides ive been following:
https://forum.xda-developers.com/gal...-10-1-t3934805
https://forum.xda-developers.com/app...mless-t3473445
https://topjohnwu.github.io/Magisk/i...system-as-root
I see posts saying I need and don't need Multidisabler so I'm confused on what I actually need: https://forum.xda-developers.com/gal...ption-t3963020
Another one: https://forum.xda-developers.com/gal...ption-t3919714
https://forum.xda-developers.com/gal...eries-t3918699
I have so many tabs open currently; I know I'm missing a few important ones.
So given all that info, i think i have all the software to do this between kernels, rom, twrp, odin, magisk, multi disabler? and i think thats all.
My sm-t510 build number is T510XXU2ASK5, looking through the lineage rom guide, I click the link https://samfrew.com/model/SM-T510/ and i see different versions. I'm honestly completely confused about this file and how I'm going to use it. I understand it to be the stock rom? as in factory software? With TWRP too, the numbers don't match my current build number leaving me very confused.
Do I need to downgrade my build number (i don't know if it's even a thing just asking)?
I think i can do everything relatively easy once I have an understanding of what to do first (order of things) and the specific files for the specific steps. When I'm reading these guides, I honestly have no idea which download goes for what. For ex. going back to https://forum.xda-developers.com/gal...-16-0-t3987317 like what do I need to download, the build number listed in notes regarding kernel or go to the download section right below and use that? Or both and if both, how do I use them separately for there a specific purpose? I cannot find anything that makes me feel comfortable rooting/custom rom on my device. Not comfortable in terms of I don't know what I'm doing exactly. I have put days of reading into this and still, I cannot figure out how to do this. I would really appreciate it if someone could help me. This is stressing me out and I would like to get this done before Monday due to me having some serious surgery. The reason being; I won't be as fresh on everything I've read recently.
I'm sorry if this post is choppy and all over the place. I'm just exhausted and clueless at this point. If I left any info out in order for someone to help me please let me know so I can provide it.
EDIT: The TWRP file ends in build number SK1, the file lineage-16.0-20191019-UNOFFICIAL-T510XXU2ASI4.tar.md5 doesn't match the TWRP file as well as my current build number; which ends in SK5. So nothing is matching the 3 last characters in my build number across all guides besides the samfrew link.
Also, I keep seeing i need a .tar TWRP file for recovery (?) but when I unzip both files are .img (named boot/recovery)
Click to expand...
Click to collapse
without reading answers i can say that im with YOU! Im almost 3 days to root my T510! We must RAMDISK YES in Magisk but to do that we need to extract recovery.img (https://www.droidwin.com/install-magisk-in-recovery-root-android/) from stock original ROM T510OXM5CUJ1 and Im stucked at the part NORAMDISK trying to patch recovery.img with Magisk Manager (with recovery mode checked) but i only get the "waiting for device in ADB" and I conect disconect USB C and nothing...Still NO RAMDISK...
I used 3 different ROMS but no lucky and tried with firmware CUJ1 but no lucky again. Without "NORAMDISK: YES" no root...stucked. But i saw a T510 with OrangeFOX!
framC0 said:
without reading answers i can say that im with YOU! Im almost 3 days to root my T510! We must RAMDISK YES in Magisk but to do that we need to extract recovery.img (https://www.droidwin.com/install-magisk-in-recovery-root-android/) from stock original ROM T510OXM5CUJ1 and Im stucked at the part NORAMDISK trying to patch recovery.img with Magisk Manager (with recovery mode checked) but i only get the "waiting for device in ADB" and I conect disconect USB C and nothing...Still NO RAMDISK...
I used 3 different ROMS but no lucky and tried with firmware CUJ1 but no lucky again. Without "NORAMDISK: YES" no root...stucked. But i saw a T510 with OrangeFOX!
Click to expand...
Click to collapse
I just finished flashing the latest Nexus ROM and rooted it with Magisk merely by flashing the Magisk zip file. You can flash the Nexus ROM without first flashing anything else but the latest CUL1 (not CUJ1) stock ROM. Nexus includes both TWRP and gapps. The only time you have to patch things to get Magisk installed is when you are trying to root a stock ROM instead of a custom ROM. Custom ROMs always to the patching for you.
lewmur said:
I just finished flashing the latest Nexus ROM and rooted it with Magisk merely by flashing the Magisk zip file. You can flash the Nexus ROM without first flashing anything else but the latest CUL1 (not CUJ1) stock ROM. Nexus includes both TWRP and gapps. The only time you have to patch things to get Magisk installed is when you are trying to root a stock ROM instead of a custom ROM. Custom ROMs always to the patching for you.
Click to expand...
Click to collapse
Wow i will try this today and will post feedback. Are you on Android 11? Thank You!
UPDATE: So...flashed with T510XXU5CUL1...
From OEM stock firmware:
Unlock bootloader -> done
Hold Vol Up & Vol Down buttons during restart to enter Download mode
Install TWRP to AP with Odin --> twrp-3.6.0_11-2-T510XXU5CUL1-20220218.tar ---> this put the tablet into emergency mode... had to do again "Hold Vol Up & Vol Down buttons during restart to enter Download mode" and reflash it again. stucked at this point. cant flash TWRP with that! Maybe this TWRP file its for Android 11.2 and im on 11?
framC0 said:
Wow i will try this today and will post feedback. Are you on Android 11? Thank You!
UPDATE: So...flashed with T510XXU5CUL1...
From OEM stock firmware:
Unlock bootloader -> done
Hold Vol Up & Vol Down buttons during restart to enter Download mode
Install TWRP to AP with Odin --> twrp-3.6.0_11-2-T510XXU5CUL1-20220218.tar ---> this put the tablet into emergency mode... had to do again "Hold Vol Up & Vol Down buttons during restart to enter Download mode" and reflash it again. stucked at this point. cant flash TWRP with that! Maybe this TWRP file its for Android 11.2 and im on 11?
Click to expand...
Click to collapse
You don't need to flash TWRP if you flash https://forum.xda-developers.com/t/...k-for-2019-galaxy-tab-a-10-1-sm-t510.4234889/ TWRP is built into this ROM. After installing stock CUL1, did you boot it, connect to wifi, skip the rest of setup and then enable Dev mode before rebooting to download and flashing from Odin?
edit: Don't attempt to download from the regular download link. Use the link under Build archives that says Android File Host and scroll down till you find the CUL1 md5 file.
lewmur said:
You don't need to flash TWRP if you flash https://forum.xda-developers.com/t/...k-for-2019-galaxy-tab-a-10-1-sm-t510.4234889/ TWRP is built into this ROM. After installing stock CUL1, did you boot it, connect to wifi, skip the rest of setup and then enable Dev mode before rebooting to download and flashing from Odin?
edit: Don't attempt to download from the regular download link. Use the link under Build archives that says Android File Host and scroll down till you find the CUL1 md5 file.
Click to expand...
Click to collapse
AH! So donwloaded Nexus_Stock_CR_T510XXU5CUL1-20220219.tar and put into AP in Odin... and FAIL. Error: "Only official released binaries are allowed". Before i flashed with T510XXU5CUL1 didnt conect wifi and enabled usb debug.
EDIT: i dont have OEM unlock option in DEV but its unlocked, i checked when in downloaded mode it says "lock device and..." so its unlocked.
framC0 said:
AH! So donwloaded Nexus_Stock_CR_T510XXU5CUL1-20220219.tar and put into AP in Odin... and FAIL. Error: "Only official released binaries are allowed". Before i flashed with T510XXU5CUL1 didnt conect wifi and enabled usb debug.
Click to expand...
Click to collapse
You must connect wifi and enable Dev mode before flashing. If, after flashing CUL1, you went through the regular setup routine and put in a Google Account, you must also enable OEM in Dev options.
lewmur said:
You must connect wifi and enable Dev mode before flashing. If, after flashing CUL1, you went through the regular setup routine and put in a Google Account, you must also enable OEM in Dev options.
Click to expand...
Click to collapse
YES!!!!!! YOU ARE THE BEST!!!! Done! It booted directly to TWRP!!! THANK YOU!!!! So now will flash Magisk with twrp right? Alawys rooted my devices but this 510 wow...never saw a thing like this
Edit: The fight continues - So i did wipe and format data in TWRP and reboot system and im IN. Installed Magisk 23.0.apk and noticed that im still with "RAMDISK: no"... Searching how to do next to root! Im very near of the goal!!!! Finally! Big thanks to lewmur!
lewmur said:
I just finished flashing the latest Nexus ROM and rooted it with Magisk merely by flashing the Magisk zip file. You can flash the Nexus ROM without first flashing anything else but the latest CUL1 (not CUJ1) stock ROM. Nexus includes both TWRP and gapps. The only time you have to patch things to get Magisk installed is when you are trying to root a stock ROM instead of a custom ROM. Custom ROMs always to the patching for you.
Click to expand...
Click to collapse
I just finished flashing the latest Nexus ROM and rooted it with Magisk merely by flashing the Magisk zip file.
Click to expand...
Click to collapse
Sorry just one more question im very near. I will flash this Magisk (magisk_patched-24300_tkk90.img) in TWRP or Odin? And is this file from https://forum.xda-developers.com/t/...019-galaxy-tab-a-10-1-sm-t510.4234889/page-18 ?
My brain will explode few days in a row to get it rooted
EDIT: Since an older version dont know witch, Magisk Manager and Magisk are joined in apk so i just flashed Magisk 23.0.apk in TWRP...rooted!!! DONE!!!! FINALLY
framC0 said:
Sorry just one more question im very near. I will flash this Magisk (magisk_patched-24300_tkk90.img) in TWRP or Odin? And is this file from https://forum.xda-developers.com/t/...019-galaxy-tab-a-10-1-sm-t510.4234889/page-18 ?
My brain will explode few days in a row to get it rooted
Click to expand...
Click to collapse
Download latest Magisk from https://magiskapp.com/zip/ and flash with TWRP.
lewmur said:
Download latest Magisk from https://magiskapp.com/zip/ and flash with TWRP.
Click to expand...
Click to collapse
Thank you!! Im facing a problem when connect USB to PC...sometime tablet restarts and sometimes dont appear on PC even in device manager. Did you got this also? Not very important because i will access via FTP. Just to learn...thanks!
framC0 said:
Thank you!! Im facing a problem when connect USB to PC...sometime tablet restarts and sometimes dont appear on PC even in device manager. Did you got this also? Not very important because i will access via FTP. Just to learn...thanks!
Click to expand...
Click to collapse
USB cables are notorious for being flaky. Sometimes it helps to just turn the cable over and plug it back in. I always keep several on hand so that if I have connection problems I can try another cable.