So far I've gotten remote adb on my phone and have gotten flauncher and launcher manager installed and gotten some crap off the TV but I would love a list of adb commands that is useful for Android tv to change to make the TV run better and for longer since the settings are so limited.
Related
Hi you all,
this is probably not the right forum for this request (I don't have a Shield TV, but a Sony 4K TV with built in Android TV).
But I didn't find a better suitable Forum than this one.
I'm new here and generally relatively new with Android. I only got two Android devices at home:
- an Amazon Fire TV in my office and
- a Sony KD 55x8505c 4K Android TV in the living room.
My Smartphones and Tablets all run on iOS - but I realize more and more that it might be helpful to get a small Android Tablet in the near future to benefit from all possibilities Android offers.
Now to my problem:
I wanna use the German Sky Go App on my Android TV. The current version 1.4.3 is installed an it works. However, it's far from perfect because the menus are out of alignments, you can't see episode numbers and if you click anywhere else than the PLAY button, the app crashes.
I had exactly the same issue on the Amazon Fire TV - but there I found a solution. You simply needed to change the display density by typing "am display-density 280" before starting the app and it works perfect. You can automate that by using the app Tasker. So on Fire TV in the office - everything's perfect.
Now I wanted to achieve the same on my Android TV - and therefore I need your help. The command "am display-density 280" doesn't work an the Android TV. I tried entering it directly through a Shell / Terminal. When I started the Tasker App I couldn't get past the Disclaimer. There was no Accept button to be found. In a different forum I found a possible way for tasker by extracting an already activated tasker version from a different Android Device and installing this version on the Android TV. However, I only got the Fire TV as a different device and I have no idea how to extract the app from the Fire TV including the necessary data. But without knowing the right command to actually change the display-density, Tasker wouldn't help me anyway.
So the most important thing is to find a way to change the display-density to 280 first. Afterwards I need to find a way to automate that when the App is launched. Can you please help me?
Greets
z0dac
Hi,
I'm trying to do the same as you. I also read the Fire TV thread and tried Tasker on my Shield TV, which didn't work.
So i guess i'll set up tasker on my phone to change density to 280 when starting SkyGo and back to standard when leaving the app.
Then i have to backup the app+data - either with Helium (no root) or if that fails (which is likely) with Titanium (root, my Shield TV isn't rooted... yet ).
If i succeed, i could share the Tasker backup with you, if you're interested. I'm busy this week, but i might give it a try next week / weekend.
so here´s what i did:
i changed the display density with the adb command "adb shell wm density 280 %% adb reboot"
i could watch a trailer in sky go, but no luck with live streams or movies. so for now no solution from my side
Thank you!
I finally did it!
I installed Android Studio on my Mac including all SDKs. Then I turned Developer Mode on on my Android TV and connected through adb. With your command I was able to switch the display density to 280 and now finally Sky Go looks and works as it should.
However - now the whole Android TV OS is in density 280. I already noticed that the screen keyboard looks a bit odd.
Now the only thing I miss is the possibility to switch the density only for the Sky Go App. On Fire TV I can do that with Tasker, but on Android TV Tasked doesn't work. If anybody could help me with that...?
Thanks again and
Greets
z0dac
Hi,
I am thinking how nice it would be to work with my new Shield TV box, connected to the family TV set downstairs, from my PC in my upstairs study.
Is anything like that possible?
I mean installing applications, trying and configuring launchers, and the like.
I use a program called AdbLink for the PC, or on Android you can use Easy Fire tools I believe is the name. ADB link you can do just about anything. EFT can be used to install apks on your Android device.
Currently it's kinda hard to navigate because it's not possible to type with joycons. Apps like YouTube are also impossible to use in docked mode. Does anyone already experimented a bit and got a better experience?
You could try to remote control your switch with your smartphone.
Something like DroidMote should work. I might try DroidMote myself but the Server app is paid and I don't really want to add my Google account to the switch (I am not using GAPPS on switch). Maybe buying it on my phone, backing up with Titanium Backup and restoring it on the switch will do the trick.
You *may* be able to get an android tv bluetooth remote and connect it. I have not tried.
Kodi can give you a great dashboard for an htpc setup with a custom theme. You can even have it auto launch when you boot into android so you never see the android interface just a nice tv setup. That's how I have my Android tv boxes. I use one of these style remotes as well for the keyboard:
https://www.amazon.com/ILEBYGO-Back...e+tv+keyboard&qid=1564503866&s=gateway&sr=8-4
You will want to use Android TV apps for landscape apps like youtube etc.
I use one of these when it's in docked mode. Just have the dongle plugged into the dock and you have an easy to use mouse and keyboard.
https://www.amazon.com/Upgraded-Rii-Wireless-Keyboard-Raspberry/dp/B00Z81U3YY
Try hal launcher and the leakback keyboard.
sorry for kidnapping your thread, but when you use docked mode, does it go to fullscreen? Mine stays with black bars up and down... would say that it's not outputting the correct resolution...
Just want to recommend airscreen so you can use it as a Chromecast.
Replace the default launcher with TV Launcher or HALauncher. Use a blue tooth or wireless keyboard until the soft keyboard get fix. The current Amazon Fire TV remote can be paired using blue tooth and works with this android build.
I think would be great if someone with more experience could port this solution https://drive.google.com/folderview?id=0ByIKEmoQi-hpYXBpbV9Sb3JFeVk
It is way to convert Shield Tablet into Android TV Shield. I've found this pdf with guide and files in zips folder. It obviously doesn't flash because Lineage has different file structure, but maybe it doesn't require much tweaking. It would be great, because it comes with Chromecast support and there are plenty Android TV apps which require full Android TV structure.
The scripts itself seems compatable, the only thing that needs proper porting would be TV Gapps. If anyone can port these successfully let me know.
Think it shouldn't be to hard to transform the OS into a Android TV. Just don't have a Switch to play with it, but i really like the Idea... Think i will grab a Switch around Christmas and make it happen...
is it technically possible to implement framerate switching and widevine level 1 support for drm protected content playback in hd in the switch android port?
see my questions here:
https://forum.xda-developers.com/ni...wers/to-change-tv-refreshrate-docked-t3992615
i'm really curious about that.
would be awesome to watch stuff with the proper refreshrate for smooth playback and the drm protected content in hd in docked mode
I am estonished how less information I could find about that topic. Control a TV set via standard IR remote control is painful. Just think about type in a search word for the different apps.
Wouldn't it be much easier to use smartphone for this? I found in PlayStore quite a few apps that promise things like that, but I get non of them working. Most time they doesn't even find my Android TV, although all is in same net.
The only app I could found that does at least a little was the "Android TV Remote" (yellow icon) - but only after manually type in my IP. But it can just move curser a bit, so not so helpful.
I heard about Googles own app: "Android TV Remote Service".
RIP Android TV remote app, hello Google TV remote app
Out with the old, in with the new.
www.theverge.com
While I could found that app on PC google store, it was not available at smart phone? Why that. So I go for some other place to download as:
Android TV Remote Service APK Download
Download Android TV Remote Service APK - Android TV Remote Service is an application from Google designed to work specifically with Android TV devic...
mobile.softpedia.com
but couldn't install it.
Anyone has some ideas how to solve the problem?
same interest
Keyboard & Mouse Tanpa Server - App su Google Play
Trasforma il tuo dispositivo Android in mouse e tastiera remoti Bluetooth!
play.google.com
Check this app. I'm currently using it and I find it quite useful
Any keyboard for Android TV which has full-size? I mean like hacker keyboard but support remote?
Use KDE Connect.
I'd recommend installing using "adb install -g" to grant all permissions except for accessability.
Hi there,
I have inherited a Panasonic TV model TX-58DX780 which I believe is from year 2016. The operating system is Firefox OS, which is discontinued. The app market is pretty limited, obviously.
I would like to know whether it's possible to install Android TV in this device, so as to erase the original Firefox OS and having the same system as I would have if I bought a TV today running Android TV. I haven't found any references online about how to do this in my specific device.
This is my first smart TV. I have installed Linux from scratch in some computers over the years, but I'm not a developer and I have no clue about TVs. I'm assuming the process can be similar: booting the TV from a USB drive containing the new OS to be installed.
A second question is whether this is actually worthy: if it's going to be a can of worms, perhaps I'll be better off with just buying a Chromecast? My purpose is not to experiment, but to have a TV with a OS that I can use to install modern apps.
Thanks in advance for any help anyone can provide.
Cheers, Manuel