Hi.
I started my T580 this afternoon, and now it suddenly says could not do normal boot invalid kernel length.
How can i get past that?
I have tried to go into ODIN mode and see if i can flash twrp again, but my pc says it cant recognize the tablet.
Is it forever bricked?
tuenbabz said:
I have tried to go into ODIN mode and see if i can flash twrp again, but my pc says it cant recognize the tablet.
Is it forever bricked?
Click to expand...
Click to collapse
Have you tried a factory reset from recovery mode?
lewmur said:
Have you tried a factory reset from recovery mode?
Click to expand...
Click to collapse
I think i figured it out.
Installed Samsung usb drivers, tried ODIN mode again, and installed newest TWRP recovery, and im back running Lineage 19.1
Related
So I am working on a SM-T230nu for a buddy, We were going top root it for him but after I installed twrp he took it home and i dont know what he did. I think he tried flashing twrp again, but it failed and he just rebooted.
point being that at this point it is a black screen, but when i plug it into the computer i get the "rocovery has encountered an issue , select recover in kies and try again" screen but it only flashes it for an instant every ten seconds. and the computer does not recognize it. when i go to odin it does not show any connected devices. i already tried every button combination and opened her up and pulled the battery ribbon, but it does the same thing as soon as i plug it back in. Has anyone seen this before? is there any way to get back to recovery mode?
Go to Download Modus.
Go into Odin and install a stock rom.
The Recovery should be overwritten with the standard one.
Then it should work and you can install TWRP again.
That works for me when i had a bootloop.
infinite reboot
I have the same situation, but already I flashed the stock rom, and the problem continue, infinite reboot, I can't into recovery mode, only download mode.....any idea?
You can also install a recovery with odin. I would try first to do that and then install another rom. No error in odin installing stock rom?
thyl123 said:
You can also install a recovery with odin. I would try first to do that and then install another rom. No error in odin installing stock rom?
Click to expand...
Click to collapse
Already I instaled 2 another recovery with odin, but the problem continue..........infinite reboot.......I can't into recovery neither to the android desktop
Hi,
I was flashing twrp with flashify when I just rebooted in recovery and since that moment my phone is stuch on an infinite bootloop showing me the:
"Recovery booting (recovery is not seandroid enforcing...)"
I'm plugging off the battery for some hours, but when plugged in nothing changed.
My phone has the usb port broken, so I can use it only to charge the battery, but no pc will recognize it.
Since the fact that I can't access download mode, or recovery mode to restore a nandroid backup, It's insane to buy a usb port to change it on the phone and try to link to a pc?
I mean, is there a way to access download mode?
Does JIG usb work in this situation of hard brick?
Any advice?
Thanks for answering.
whychange said:
Hi,
I was flashing twrp with flashify when I just rebooted in recovery and since that moment my phone is stuch on an infinite bootloop showing me the:
"Recovery booting (recovery is not seandroid enforcing...)"
I'm plugging off the battery for some hours, but when plugged in nothing changed.
My phone has the usb port broken, so I can use it only to charge the battery, but no pc will recognize it.
Since the fact that I can't access download mode, or recovery mode to restore a nandroid backup, It's insane to buy a usb port to change it on the phone and try to link to a pc?
I mean, is there a way to access download mode?
Does JIG usb work in this situation of hard brick?
Any advice?
Thanks for answering.
Click to expand...
Click to collapse
You need a working usb to flash a custom recovery or an offical fw. I thought flashify needs root access to work?. Or if you already have root, you could adb to flash twrp but it's too late now.
Try getting into download mode. When it asks to proceed or cancel, choose cancel. Some people are lucky that the phone boot into system again but they need to fix the broken recovery later.
Sent from my SM-G925F
Rosli59564 said:
You need a working usb to flash a custom recovery or an offical fw. I thought flashify needs root access to work?. Or if you already have root, you could adb to flash twrp but it's too late now.
Try getting into download mode. When it asks to proceed or cancel, choose cancel. Some people are lucky that the phone boot into system again but they need to fix the broken recovery later.
Sent from my SM-G925F
Click to expand...
Click to collapse
After 2 months of battery out, finally I got download mode to work, and pressing cancel my phone started.
Thanks.
But now it seems that there is no custom recovery installed, so when i go in custom recovery, the loop starts again.
How may I install again a custom recovery, knowing that:
1) I can't connect to pc, cm 12.1 has a bug, no pc recognizes my phone;
2) rom manager doesn't install any custom recovery on my phone;
3) flashify made my phone in boot loop, and I can't understand what I was wrong 2 months ago.
Thank you, man.
See your other post man .
Flash the tar version of TWRP using Odin. If there is no tar version, you can use Cygwin to convert an img file to a tar file.
Hi
I have mistakenly put my j5 in odin download mode instead of recovery mode, though i could come out of the odin download mode easily. But when i restarted my device it was behaving v slow. I restarted it into recovery mode for factory reset there i have seen downloading system update and then no command error. I could come out of it and did factory reset my device twice. But so far my device is behaving slow and differently and the no command error is also there in recovery mode.
Should i flash firmware through odin or is there any other fix into this.
Regards
maqs95 said:
Hi
I have mistakenly put my j5 in odin download mode instead of recovery mode, though i could come out of the odin download mode easily. But when i restarted my device it was behaving v slow. I restarted it into recovery mode for factory reset there i have seen downloading system update and then no command error. I could come out of it and did factory reset my device twice. But so far my device is behaving slow and differently and the no command error is also there in recovery mode.
Should i flash firmware through odin or is there any other fix into this.
Regards
Click to expand...
Click to collapse
I don.t know about that slow thing that you had but the ,,no command,, error is not an error.. Stock recovery shows that when you are not doing anything (right after you boot into stock recovery mode)
MaDaLiNoSt said:
I don.t know about that slow thing that you had but the ,,no command,, error is not an error.. Stock recovery shows that when you are not doing anything (right after you boot into stock recovery mode)
Click to expand...
Click to collapse
I understand that i am facing internet connectivity issues, mobile is hanging, draining battery, i am unable to activate my knox container, apps are in hybernation. I have tried to hard reset my device 3 times i have even wiped cashe but still the problem persists. No command error shows up every time i reset my device and that is not be disturbing me much, i just need to get out of these problems that i am facing
Regards
Hello I have a device j5 prime The device after the flash restarted on its own and I have been flushed by a factory but did not succeed
please help
Today i tried to flash a rom. I flash twrp recovery through odin (latest). Went to twrp, flashed lineage os but forgot to factory reset the device. I end up with encryption unsuccessful with a option to reset phone (which i dont why i cant click it). Tried to go in download mode. Got into download mode but canoot use the volume up key. I have tried to get access with tge adb tge device doesnt show up in the listed devices. So please if anyone can help me.
Daydrea said:
Today i tried to flash a rom. I flash twrp recovery through odin (latest). Went to twrp, flashed lineage os but forgot to factory reset the device. I end up with encryption unsuccessful with a option to reset phone (which i dont why i cant click it). Tried to go in download mode. Got into download mode but canoot use the volume up key. I have tried to get access with tge adb tge device doesnt show up in the listed devices. So please if anyone can help me.
Click to expand...
Click to collapse
Go to twrp again,do a full wipe and reflash lineageos.
So, i tried to flash twrp on my galaxy a40 through odin, i did it step by step as it should be done, odin said pass, but it didnt. I rebooted, and it immediately booted into download mode, again and again, whenever i tried to reboot. I tried everything i know i could try, but nothing works. Is there any way to get the twrp on it? Thanks.
Have you enabled USB debugging and OEM unlocked the phone (in the settings)?
What phone do you have? You need to flash original rom via odin. I think that your phone is bricked.
it often happens quiet it can be solved very simply by installing the patched Vendor if you want I can send you the vendor that you will have to flash it with odin and then restart the phone and return to download mode and flash TWRP from the official website
Alexmalek836316 said:
So, i tried to flash twrp on my galaxy a40 through odin, i did it step by step as it should be done, odin said pass, but it didnt. I rebooted, and it immediately booted into download mode, again and again, whenever i tried to reboot. I tried everything i know i could try, but nothing works. Is there any way to get the twrp on it? Thanks.
Click to expand...
Click to collapse
have you installed vbmeta?
the phone behaves similarly without vbmeta installed.
.