I've just set up a small wireless network at home through which I intend to use several devices to connect to the internet through my LAN!
The LAN gateway is running ISA 2004 and my home computer is running the necessary Firewall client (a completely secure connection with username and password)!
Now everything's working fine... the pocket pc hooks up just right and i can browse the network and do what I could probably do using my own personal computer BUT the internet doesn't work!
It keeps asking me for a username and password (which like i usually provide in internet explorer on my personal computer) which i do supply... three times in a row after which it gives me an error saying that ISA cannot authenticate me!
The home computer doesn;t run the internet without the firewall client, and i'm supposing the pocket pc is facing the same dilemma! is there any way to circumvent this issue? perhaps a mobile version of the isa firewall client?
Please help. Thanks!
afaik there isn't a mobile version of the firewall client.
I set my ISA server to allow anonymous internet access ,and set all my machines up as secure nat clients (set isa servers ip as default gateway, I use a dhcp scope to do this). There is lots of info on this on microsofts ISA server website, I'd suggest a look there first, or try a google for secure nat.
Good luck, works well for me but ymmv.
HI guys,
Does anyone know how to get a static IP address when using the GPRS connection to the internet. The reason being is because our corporate firewall has to recognise the device through it's IP. Is there any other possible methods for recognising the user?
Also does a VPN work well over GPRS and is there any extra configuration involved on the VPN server
Cheers
Any answers would be great.
Unfortunately there is no simple answer to your question. AFAIK you cant get a fixed ip on gprs, but if your using the right firewall and the right vpn host you dont need to.
I use and supply windows sbs 2003 servers and vpn into them regularly. I have also used citrix to achieve similar results. Might be a bit difficult to persuade your firms it dept to set up something like that for 1 person though.
PM me if youd like any advice.
BillyB said:
HI guys,
Does anyone know how to get a static IP address when using the GPRS connection to the internet. The reason being is because our corporate firewall has to recognise the device through it's IP. Is there any other possible methods for recognising the user?
Also does a VPN work well over GPRS and is there any extra configuration involved on the VPN server
Cheers
Any answers would be great.
Click to expand...
Click to collapse
Hello Billy,
You ask a good question, but the answer isn't simple. Most carriers do have two types of APN (Access Point Name) provision for your SIM: "private" APN (which provides a non-routable IP assignment from behind a NAT, for basic browsing and e-mail functionality) and "public" APN (that provides a routable IP assignment, which is the Minimum Requirement for a more sophisticated connection type, such as VPN, etc). However, both of them are assigned by a DHCP (Dynamic Host Configuration Protocol) Server on a GGSN (Gateway GPRS Support Node) of your particular GPRS network operator. In either case, the end result will obviously be a DYNAMIC IP address on your GPRS terminal (be it a laptop PC, a PDA, or phone)
Some carriers do offer what is called a "dedicated APN" provision, which gives the subscriber their own IP range to choose from (almost like a small subnet), but it is only available to corporate giants like Pepsi (for example).
Now, to sum it up, you must have the proper APN provisioned on your Mobile SIM account (which the provider will normally call something like a "VPN data package" in billing terms). Then, you must obviously establish a GPRS session before you can connect your VPN client (but remember that most basic VPN clients work the best). It is pretty sad to say, but Microsoft Windows-embedded VPN client on Win2k/XP Pro so far has performed the best with no quirks whatsoever. It has to be via PPTP...L2TP has also worked for me..otherwise, the fancier (and more secure) the VPN tunneling protocol, the more its likely to fail. Normally all you need for a basic MS WIndows VPN client config is the Server name (or IP address), the user name, and the password.
Hope this helps,
Let me know how it goes,
Alex
PS. PM me if you have further questions.
VPN and TS Its like pulling teeth
hi all this has got to be the most anoying problem ever. i can connect to O2 vpn access point and hence i can connect to my work vpn server. however as soon as i try to open a TS connection to my desktop (through the vpn) the VPN connection is dropped and i never connect. Can anybody tell me why? if i have a vpn connection to my work server why does TS try to make another connection and bomb out the original. Is there a fix or another way of doing this i.e. does a external IP have to be nat'd to my desktop IP on port 3389? all help greatly appreciated. Ian
I am trying to set up a vpn connection and can connect to our firewall but I cannot connect to the network. If I try to pin the network it just times out.
The firewall is configured to allow the device through.
Can abyone help with this??
Thanks
Sorry I'm no expert on VPN or much else.
I use Remote Desktop through a router, firewall enabled.
Took a while to get through the firewall until I had set everything up properly.
You have to enable a virtual server port on the router to allow the traffic in, have you set one up and if so the right port number for VPN. From what I have seen its 1723.
Not much help I know, but seach on the internet for help on setting it up correctly, check your settings and double check.
Hi quest,
let me answer some questions to see things more clearly:
1. Do you use built-in (Microsoft) VPN-Client or 3rd party product
2. If Microsoft, what type of VPN did you set up? L2TP or PPTP?
3. If L2TP, how do you authenticate: Preshared Key or Certificate?
4. How do you know that the device connects to your firewall?
5. How do you know that the device doesn't connect to the network?
6. What exactly is the rule permitting your device passing the firewall?
The answers to your questions are:-
We are using the built in MS VPN client of Win Mobile v5.0 (5.1.1700 build 14352.0.1.0)
I have tried both PPTP and L2PT
When L2TP, I was authenticating with a preshared key
Firewall logs show PPTP negotiation successful, and issues a VPN IP address to the device
It can ping the firewall external interface, but times-out trying to reach an internal address
The VPN session is established, but the firewall logs don't register either deny or allow traffic for each internal ping request, rather the firewall packet error count increments for each failed attempt.
Any help is greatly appreciated.
The answers to your questions are:-
We are using the built in MS VPN client of Win Mobile v5.0 (5.1.1700 build 14352.0.1.0)
I have tried both PPTP and L2PT
When L2TP, I was authenticating with a preshared key
Firewall logs show PPTP negotiation successful, and issues a VPN IP address to the device
It can ping the firewall external interface, but times-out trying to reach an internal address
The VPN session is established, but the firewall logs don't register either deny or allow traffic for each internal ping request, rather the firewall packet error count increments for each failed attempt.
Any help is greatly appreciated.
For anyone interested in data security the ability to encrypt network traffic is obviously important-- especially in light of the myriad of recent well publicized reports of private and government electronic snooping. It is also relevant to mention that to date no one has come close to cracking "TwoFish" encryption which can be used by SSH. With this in mind, consider the following tutorial which describes a method for encrypting all 3g, 4g, and Wi-Fi data, thus beefing up phone and personal data security.
Setting up a global SSH Tunnel on Android phones
This tutorial assumes the reader possesses a fully configured SSH server and rooted phone. In lieu of a server, (eg., the reader only has only a Windows-based operating system), research into CYGWIN is recommended. I use CYGWIN to run my SSH server and I have found that it is the most robust option for Windows users; however, setting this up on Windows can be a daunting task.
Setting up global SSH Tunnel on Android
1. Download 2 apps from the Google Playstore: ConnectBot and ProxyDroid
2. Install ConnectBot and ProxyDroid on your phone.
3. In ConnectBot set up Port forwards for your SSH connection. For "Type" field use "Dynamic (SOCKS)." For “Source Port” use 56001 or any local port not being used. The reasoning behind using port 56001 is this: System Ports (0-1023), User Ports (1024-49151), and the Dynamic and/or Private Ports (49152-65535)
4. Open ProxyDroid and configure as follows:
Host: 127.0.0.1
Port: 56001 (or the port you chose to use in step 3)
Proxy Type: SOCKS5
Global Proxy: Check the box
The above procedure accomplishes several things. First, ConnectBot remotely connects to your SSH server. Next, the ConnectBot connection forwards to the local port 56001. ProxyDroid then redirects all network traffic through the localhost on port 56001. Once you are connected through ConnectBot and ProxyDroid is activated all of your data will be tunneled through the encrypted ConnectBot session. This is an excellent way to set up a global proxy because it does not require manual configuration of any applications to connect through the proxy. You can test the functionality of the connection by opening up your phone browser and performing the Google search: What is my IP. If the proxy is functional you will see the WAN IP of the network of your SSH server. Additional and more thorough testing can be done with packet sniffers such as WireShark.
An application called "SSH Tunnel" is an alternative to accomplishing the above. However, I find ConnectBot and ProxyDroid is more elegant and gives better control-- not to mention being more sophisticated/chic. When correctly performed the ConnectBot and ProxyDroid method encrypts all 3g, 4g and Wi-Fi data on your phone. This is obviously useful for phone access of sensitive materials especially using unfamiliar or alien network connections. With the current proliferation of identity theft via electronic snooping on mobile devices I do not advocate using cellular phones for any banking or electronic transactions without setting up a robust and reliable encrypted connection.
I'm having trouble with this exact setup on Android 4.3 with DNS Proxy (proxydroid) enabled in China. When DNS Proxy is enabled, no traffic will come through at all. If I disable DNS Proxy, it works but without proxied DNS requests, I can't get to Youtube/twitter/FB.
Any ideas?
SSHTunnel for 4.2.2 is a much better alternative than running 2 separate apps and I still use it on my 4.2.2 tablet. But I don't want to downgrade my phone to 4.2.2 just for this
Android 4.3?
strifej said:
I'm having trouble with this exact setup on Android 4.3 with DNS Proxy (proxydroid) enabled in China. When DNS Proxy is enabled, no traffic will come through at all. If I disable DNS Proxy, it works but without proxied DNS requests, I can't get to Youtube/twitter/FB.
Any ideas?
SSHTunnel for 4.2.2 is a much better alternative than running 2 separate apps and I still use it on my 4.2.2 tablet. But I don't want to downgrade my phone to 4.2.2 just for this
Click to expand...
Click to collapse
Unfortunately, I have not done any testing with android 4.3 yet so I'm not sure why the dns request wouldn't be proxied. I'll look into it and get back to you.
DNS proxy on android 4.3
strifej said:
I'm having trouble with this exact setup on Android 4.3 with DNS Proxy (proxydroid) enabled in China. When DNS Proxy is enabled, no traffic will come through at all. If I disable DNS Proxy, it works but without proxied DNS requests, I can't get to Youtube/twitter/FB.
Any ideas?
SSHTunnel for 4.2.2 is a much better alternative than running 2 separate apps and I still use it on my 4.2.2 tablet. But I don't want to downgrade my phone to 4.2.2 just for this
Click to expand...
Click to collapse
So I finally had a chance to upgrade to 4.3 this week. I tested the dns proxy with proxydroid and it seems to be working fine. What rom are you using? I'm on Sacs rom and I would highly recommend it. Heres the link:
http://forum.xda-developers.com/showthread.php?t=2512983
4.4
Dr.Tautology said:
So I finally had a chance to upgrade to 4.3 this week. I tested the dns proxy with proxydroid and it seems to be working fine. What rom are you using? I'm on Sacs rom and I would highly recommend it. Heres the link:
http://forum.xda-developers.com/showthread.php?t=2512983
Click to expand...
Click to collapse
Tested on kitkat and is working fine. Ssh tunnel app not working however.
Dr.Tautology said:
So I finally had a chance to upgrade to 4.3 this week. I tested the dns proxy with proxydroid and it seems to be working fine. What rom are you using? I'm on Sacs rom and I would highly recommend it. Heres the link:
http://forum.xda-developers.com/showthread.php?t=2512983
Click to expand...
Click to collapse
I use pacman rom on nexus 4.
thank you for this tutorial!
I have been looking for a new way to setup SSH tunneling since the app "ssh tunnel" from the Google Play store stopped working with Android 4.2+
I can't wait to try this out..
I have two phones both SGS4's one running CM 10.2 and the other stock on 4.3 so i will try both of them out and report back here how it works out.
Thanks again for the tutorial!
-droidshadow
Thank you Dr.Tautology
Thank you Dr.Tautology
I was searching a big time for the solution you gave me.
First I was using SSHtunnel app from google play and it worked on my note 3 SM-N9005 (rooted) with jb 4.3. After upgrade to 4.4.2 kitkat (rooted) I could connect but there was no changing to my home ip in the browsers that I use with surfing by example to whatmyip . I also have a tablet "nexus 7" 2012 version upgraded also to 4.4.2 and on this device SSHTunnel is functional and the ip is changing??? I did not understand. Now I was searching for alternatives for my galaxy note 3 and I've found ssh connectbot and proxydroid. After I added the settings that I always used with dyn socks5 port 11723 on both programs.... -> connection to my DD-WRT router (with connectbot) was also possible. I also booted proxydroid and again after running chrome or firefox I still had the same ip so it didn't work.... Now I've found your post and read that the socks5 port must be above 49152. I changed the ports on both programs to 56001 in ('connectbot and proxydroid) and BAM! Connected with my home IP from outside my home :laugh:
The weird thing is that it worked on JB 4.3 with socks5 port 11723.
Now my woking SSH tunnel config -> Host = home-ip:7500 (default port = 22 in DDWRT)
user to connect to DD-WRT router = Root
password = Router password
dyn proxy socks5 port = 56001 as you suggest.
I have an app from my isp that I only can use with my home ip so I had to be home and connect by wifi. Now it's possible again with tunneling
Now the only thing that I have to do is thank you. :victory:
Never thought that the port number should be the problem.
Best regards DWroadrunner
I managed to set this up using SSH Tunnel for android. However I would like to use SSH Autotunnel as it's supposed to handle network changes better and is also more light weight. Does anybody know what type of private key this programm accepts? I have had no luck using putty keygen and the id_rsa I created in ubuntu does not seem to work either.
Glad to help!
DWroadrunner said:
Thank you Dr.Tautology
I was searching a big time for the solution you gave me.
First I was using SSHtunnel app from google play and it worked on my note 3 SM-N9005 (rooted) with jb 4.3. After upgrade to 4.4.2 kitkat (rooted) I could connect but there was no changing to my home ip in the browsers that I use with surfing by example to whatmyip . I also have a tablet "nexus 7" 2012 version upgraded also to 4.4.2 and on this device SSHTunnel is functional and the ip is changing??? I did not understand. Now I was searching for alternatives for my galaxy note 3 and I've found ssh connectbot and proxydroid. After I added the settings that I always used with dyn socks5 port 11723 on both programs.... -> connection to my DD-WRT router (with connectbot) was also possible. I also booted proxydroid and again after running chrome or firefox I still had the same ip so it didn't work.... Now I've found your post and read that the socks5 port must be above 49152. I changed the ports on both programs to 56001 in ('connectbot and proxydroid) and BAM! Connected with my home IP from outside my home :laugh:
The weird thing is that it worked on JB 4.3 with socks5 port 11723.
Now my woking SSH tunnel config -> Host = home-ip:7500 (default port = 22 in DDWRT)
user to connect to DD-WRT router = Root
password = Router password
dyn proxy socks5 port = 56001 as you suggest.
I have an app from my isp that I only can use with my home ip so I had to be home and connect by wifi. Now it's possible again with tunneling
Now the only thing that I have to do is thank you. :victory:
Never thought that the port number should be the problem.
Best regards DWroadrunner
Click to expand...
Click to collapse
Hey DWroadrunner,
That's great news! I'm very happy that my post helped you, as my intention was to provide all the necessary information to do this in one place. It's not always the case that a user port wont work, but unless you are big on port level security it's not easy to determine if/when the port is being used. This is probably why 11723 did work for you, however it's always better to go with a dynamic/private port range. Also, if you want a simple way to improve the security of your ssh server change the default port from 22 to something else. You'd be surprised how many attempts to connect will be made by attackers on a daily basis.
Regards,
DocTaut
droidshadow said:
I have been looking for a new way to setup SSH tunneling since the app "ssh tunnel" from the Google Play store stopped working with Android 4.2+
I can't wait to try this out..
I have two phones both SGS4's one running CM 10.2 and the other stock on 4.3 so i will try both of them out and report back here how it works out.
Thanks again for the tutorial!
-droidshadow
Click to expand...
Click to collapse
Let me know if this is working on CM. I have tested on stock 4.3 with no issues.
Any luck yet?
rintinfinn said:
I managed to set this up using SSH Tunnel for android. However I would like to use SSH Autotunnel as it's supposed to handle network changes better and is also more light weight. Does anybody know what type of private key this programm accepts? I have had no luck using putty keygen and the id_rsa I created in ubuntu does not seem to work either.
Click to expand...
Click to collapse
Hello,
I've used auto tunnel a handful of times. Just wanted to check to see if you figured out what key it accepts. I will test it out when I get a chance.
Dr.Tautology said:
Hello,
I've used auto tunnel a handful of times. Just wanted to check to see if you figured out what key it accepts. I will test it out when I get a chance.
Click to expand...
Click to collapse
Hi, the developer send me a mail saying that autotunnel should accept both private key types. None of them worked for me, though. He also suggested to try and paste the content of the private key into the bracket. I might give that a try. Edit: I can confirm copying and pasting the private key works. But it does not seem to transfer traffic via the the server, at least not the 3g traffic while using chrome. Edit 2: Turns out SSH Autotunnel does not use a socks proxy. Therefore secure browsing is not an option. The app is for secure pop3/ftp-server/smtp-server connections only. Thanks go to Matej for his kind support.
I've been using OpenVPN but I'd prefer to use ssh, as I have several ssh servers around the world, plus their pipes are bigger than my home line I have openvpn running on.
I have yet to get SSH Tunnel (apk) to work reliably; it randomly stops working and it's just a dead connection.
Using ProxyDroid unfortunately requires me to launch ConnectBot, connect ssh, then start the proxy. It'd be nice if ConnectBot could bring up the connection automatically, or ProxyDroid could do it. What I do right now is VPN unknown wifi connections and I can automate that with Tasker. I might look to see if I can automate connecting with ConnectBot then enable the ProxyDroid connection.
You can use ssh tunnels also with Drony if some proxy with authentication is involved. Works also on non rooted devices.
Automation
khaytsus said:
I've been using OpenVPN but I'd prefer to use ssh, as I have several ssh servers around the world, plus their pipes are bigger than my home line I have openvpn running on.
I have yet to get SSH Tunnel (apk) to work reliably; it randomly stops working and it's just a dead connection.
Using ProxyDroid unfortunately requires me to launch ConnectBot, connect ssh, then start the proxy. It'd be nice if ConnectBot could bring up the connection automatically, or ProxyDroid could do it. What I do right now is VPN unknown wifi connections and I can automate that with Tasker. I might look to see if I can automate connecting with ConnectBot then enable the ProxyDroid connection.
Click to expand...
Click to collapse
I think a simple bash script could be used to automate this task. I'm going to look into it; seems like an interesting/useful project.
Dr.Tautology said:
I think a simple bash script could be used to automate this task. I'm going to look into it; seems like an interesting/useful project.
Click to expand...
Click to collapse
I think so, it's just firewall settings etc.. Unfortunately for me, I need stuff that doesn't support SOCKS so I've gone back to looking into a faster OpenVPN service.
But this is good for browsing and things that use http etc.
Dr.Tautology said:
I think a simple bash script could be used to automate this task. I'm going to look into it; seems like an interesting/useful project.
Click to expand...
Click to collapse
hi have you figured out an automated script for this task via tasker, iv tried to create something but ended up no where lol.
Hi my collage wifi connection is proxy based
Whenever i surfed internet on that connection only some basic application are connected through that connection
But many 3rd party apps doses't connect by that connection like games
Any solution like connection tunnel apps or else
I don't want to root my device
Thanks
sam.jaat said:
Hi my collage wifi connection is proxy based
Whenever i surfed internet on that connection only some basic application are connected through that connection
But many 3rd party apps doses't connect by that connection like games
Any solution like connection tunnel apps or else
I don't want to root my device
Thanks
Click to expand...
Click to collapse
Do you have to login to the proxy or is it an open proxy? If it's open, you could see if you can find a OpenVPN server that listens on 80 or 443. Then use any OpenVPN client on Android and you can add/update config to match the directions here: https://openvpn.net/index.php/open-source/documentation/howto.html#http
I've rooted my first android device yesterday (Samsung J530f) for the purpose of system wide proxyfication through a local network socks proxy. In other words, I have a socks5 client running on my PC to which I connect from my android device using a local IP in Socksdroid. The traffic coming from the android device is then proxified through the socks set in the client on my PC.
I have however huge issues with android getting the DNS server remotely, based on the proxy IP. I've tried different DNS related apps including Override DNS and DNS forwarder, but I get some very strange results. In the same browser on different checkers I get DNS servers from different countries, yet none of them are the servers that I manually set in either Override DNS and DNS forwarder. I've tried 3-4 different apps and none of them seem to work in the way intended and give inconsistent and glitchy results, so I start to suspect that there's something that prevents these apps from functioning properly.
The only way that I managed to get DNS to function like intended is to set network.proxy.socks_remote_dns to true in firefox nightly, but then again, it only uses the right DNS in one browser, and not the entire system.
Does anyone have any suggestions on what I could do to get DNS working consistently and properly?
Thx.