hi. after rooting my device, i can't login to netflix. As soon as I start the application, I get an error message. That's weird, because I didn't have any issues with it on my Pixel 5. I also tried it using an APK from apkmirror, unfortunately without success. Does anyone have the same problem and a solution ready? Thanks in advance
Hi.
In Magisk app go to settings and hide the Magisk App.
Then you will need to enable Zygisk and Enforce DenyList.
Reboot device and you will have access to Configure DenyList.
Mark full hide for Netflix.
After that you will need to install this module (screenshot below) and reboot phone again.
After that you will be able to watch Netflix again!
Just in case someone needs the zip file.
Download V1.5
Note needs to be V1.5, (1.4 does not work)
you was kinda asking for it by rooting the phone, voided the warranty too
SimMind28 said:
you was kinda asking for it by rooting the phone, voided the warranty too
Click to expand...
Click to collapse
depend your country, in my country rooting doesn't void the "two year" warranty, consumers are protected
SimMind28 said:
you was kinda asking for it by rooting the phone, voided the warranty too
Click to expand...
Click to collapse
No no no... Only Desimlock is illegal/vois warrantly, it's for that Unlock bootloader (OEM) is available and Nothing don't force customers to asking unlock period (like Xiaomi with their 169 hours waiting period, forced registration)...
SimMind28 said:
you was kinda asking for it by rooting the phone, voided the warranty too
Click to expand...
Click to collapse
Murica.
xVeenix said:
Hi.
In Magisk app go to settings and hide the Magisk App.
Then you will need to enable Zygisk and Enforce DenyList.
Reboot device and you will have access to Configure DenyList.
Mark full hide for Netflix.
After that you will need to install this module (screenshot below) and reboot phone again.
After that you will be able to watch Netflix again!
Click to expand...
Click to collapse
Thanks. Worked well but when I flash this module, the widevine level changes from L1 to L3. Is there a solution to this?
Unfortunately, I don't think there's a way. Oddly, Netflix works on my rooted Pixel 5 and has no trouble watching Netflix content in HD
I don't get it.. In rooted galaxy s10ite android 12 Netflix working without libocrypto disabler, and without passing safetynet. And it plays L1 (full hd).
In rooted galaxy tab s6 android 12 also, i have installed everything, passing sefetynet, but Netflix still doesn't load.
I fixed it by deleting every original file of Netflix With root browser, and installing the apk of Netflix i downloaded. But it plays in SD (L3)..
Really strange.
Related
Has anyone taken the recent magisk/superuser upgrades and been able to keep safetynet passing?
squandry said:
Has anyone taken the recent magisk/superuser upgrades and been able to keep safetynet passing?
Click to expand...
Click to collapse
If it's in the context of getting pokemon go working, I think this might help get what you need: https://www.reddit.com/r/TheSilphRo...around_for_the_pokémon_go/?sort=new&limit=500
squandry said:
Has anyone taken the recent magisk/superuser upgrades and been able to keep safetynet passing?
Click to expand...
Click to collapse
It's working for me with android pay.
Safetynet is passing for me using Magisk v9 & phh's Superuser r266-2, but a new version of each was released last week that chatter in other forums seem to suggest device-specific trouble with. I might try but first wanted to know if anyone else in the LePro3 world already has and had problems. My current interest in safetynet is for Android Pay and DirectvNow.
suhridkhan said:
It's working for me with android pay.
Click to expand...
Click to collapse
Thanks!
robertzas said:
If it's in the context of getting pokemon go working, I think this might help get what you need: https://www.reddit.com/r/TheSilphRo...around_for_the_pokémon_go/?sort=new&limit=500
Click to expand...
Click to collapse
Linked method is outdated ever since the introduction of November security patch.
Magisk V10 and phh SU r266 working fine for me on 20s
Upgrading worked for me too and I like how safety net check is part of the new status screen.
Seems like known issue but installing Xposed caused safetynet to fail, both before and after upgrade. Uninstalling Xposed caused safety net to pass again.
Root working and safetynet still passing on my x727 after taking the Magisk Manager upgrade to Magisk 11.1 and MagiskSu.
are all of you on a stock ROM and bootloader locked, I am using lineage OS 13, but safety net fails? do you have any idea how to fix this, just wanted to use ANDROID PAY, or do I need to be on STOCK ROM, just don't like the EUI and the status bar icons and the way they look(it's just me). Any help would greatly be appreciated=)
I am on stock ROM and unlocked bootloader. Magisk lets the unlocked bootloader stay. I don't see how safetynet could be expected to fully pass on a non-OEM supported ROM, especially over the longhaul of the cat-and-mouse game.
I don't like EUI either but changing out the launcher and even the notifications pulldown with Play Store apps helps immensely, along with using Titanium to freeze the bloatware. The main EUI remnants left after that is the lockscreen, the settings application, and the recents screen which I tolerate so as to have safetynet.
I could not pass safety net, got CM13, with MAGISK installed. Dang=)
squandry said:
I am on stock ROM and unlocked bootloader. Magisk lets the unlocked bootloader stay but I don't see how safetynet could ever pass on a custom ROM.
I don't like EUI either but changing out the launcher and even the notifications pulldown with Play Store apps helps immensely, along with using Titanium to freeze the bloatware. The main EUI remnants left after that is the lockscreen and the recents screen which I tolerate so as to have safetynet.
Click to expand...
Click to collapse
Hi, Did this but after installing MAGISK, everything passed, except FINGERPRINT got disabled, says hardware not supported. Android Pay works,just went to gas station and tried it, works flawlessly. FINGERPRINT is the problem I'm seeing now. Thanks for any help.
Sent from my LEX727 using XDA-Developers Legacy app
You mean you can't use the fingerprint sensor to unlock your phone? I am not sure, that works fine for me.
squandry said:
You mean you can't use the fingerprint sensor to unlock your phone? I am not sure, that works fine for me.
Click to expand...
Click to collapse
Yup, what boot image did you install? I think the problem was the boot image I used, are you on the 20's now? thanks
I am running the aboot from dr4stic's 19s unlocked bootloader zip, everything else is from the stock 20s OTA zip.
Ok, I have spent several hours trying to make it work and now time to ask for help. I got Leeco LePro 3 with custom Ron based on EUI, and trying to get Magisk working. First I tried installing system less SuperSU and Magisk, but it failed safety check multiple times, so I tried uninstalling SuperSU and use Magisksu, but not I am not able to move forward. I installed Magisk manager and when it try to install Magisk manager it downloads but doesn't show way to install it, I even try flashing Magisk 12 zip using TWRP, but it fails to update. Can someone please help me with getting Magisk working with safety check?
bocondo said:
I even try flashing Magisk 12 zip using TWRP, but it fails to update. Can someone please help me with getting Magisk working with safety check?
Click to expand...
Click to collapse
Flashing Magisk with TWRP should work. What do you mean by it fails to update?
Hey Folks!
Hope someone can help me out here. I've read a whole bunch of forums and have tried a number of potential solutions to no avail. I have Magisk 15.2 installed and am running Lineage OS 14.2. Multiple apps confirm I pass Safetynet and I can successfully add a card to Android Pay. However, when I try to pay at a terminal, nothing happens. I have tried multiple terminals with no success. Nfc is enabled and android beam works.
Thanks!!!
Try enabling Core Only Mode in Magisk settings, try disabling systemless BusyBox, or try uninstalling your version of Magisk and trying the latest beta. SafetyNet is a nightmare to keep up with. Every time it updates, Magisk gets broken and we have to wait for a new update. Unfortunately, the only real solution is to stop using SafetyNet-dependent apps or keep a locked bootloader/unrooted phone. Or perhaps have one phone for custom ROM stuff and another one for SafetyNet stuff. :/ This is why I'm so vocal about ROMs passing SafetyNet. Hopefully you'll find a fix.
Hey there. Thanks! My phone already passes safety net, though, so I don't think that's the issue... That's what's so bizarre about it! Would you still recommend taking those steps with Magisk Manager?
lastconfederate2 said:
Hey there. Thanks! My phone already passes safety net, though, so I don't think that's the issue... That's what's so bizarre about it! Would you still recommend taking those steps with Magisk Manager?
Click to expand...
Click to collapse
You don't get an error message or anything? Sorry, I missed that. Not sure what the issue is, then. I assume by the other apps, you mean legit apps that actually check for SafetyNet, like downloads in Netflix, a game like Fire Emblem Heroes or a banking app like RBS. If you're able to use those apps or use all of the features perfectly, the issue might just be Android Pay, which probably now detects Magisk(?). Anyway, unless you're actually able to use an app that uses SafetyNet, those SafetyNet checkers don't count for much.
Correct. No error messages, Netflix and others work fine, successfully registered a card in Android Pay, it just doesn't do anything at payment terminals.
lastconfederate2 said:
Correct. No error messages, Netflix and others work fine, successfully registered a card in Android Pay, it just doesn't do anything at payment terminals.
Click to expand...
Click to collapse
I am experiencing the same issue but with Omni 7.1 and Magisk 15.2.
Card was added but giving "Card read error" at payment terminal.
If changing the settings or flashing a beta build doesn't get it to work, then I'm not sure what will. If you're able to, backup your existing ROM and factory reset it. If your Pro3 variant has an official LeEco ROM that passes SafetyNet natively, flash that and lock the bootloader and set up Android Pay to see if it works. Can't offer much else to help you, sorry.
Might be nothing to do with your problem, but i noticed when using nfc to add contacts with other nfc phones etc, that this phone has its nfc chip at the bottom/middle of the phone (it was a while ago, hope I've not remembered incorrectly). Until i realised this i had problems getting it to work.
Edit.. my memory is so bad in now thinking it was the very very top of the phone. Try both.
Thanks for your help, everyone. I discovered today that if I initiate the transaction while my screen is locked, it will actually start the process. I can then unlock the screen and re-tap and it will successfully complete about 75% of the time.
Nothing still happens if i tap the terminal with screen unlocked.
Not perfect, but it works for now!
lastconfederate2 said:
Thanks for your help, everyone. I discovered today that if I initiate the transaction while my screen is locked, it will actually start the process. I can then unlock the screen and re-tap and it will successfully complete about 75% of the time.
Nothing still happens if i tap the terminal with screen unlocked.
Not perfect, but it works for now!
Click to expand...
Click to collapse
Are you still able to get it to work like this? What was the last update you installed? I am trying to do some research to figure out why this happens on many different devices with different roms and such. Most seem to have the ability to get Pay to work and load cards into it, but using at stores and tapping the terminals does nothing(currently my issue).
So what is you setup as of now? Magisk ver, universal safetynet fix(if you're using that) ver, OS ver/date, and what security patch?
If you can provide those things it would be helpful.
Thank you.
Yes, that is still how it works, though I've found over time that it works more like 25% of the time. The last LOS update I have installed is February 10th. I'm using Magisk 15.3, running Android 7.1.2, and last security patch is 1/05/18.
Thanks!
Any luck with this?. Havent tried lock screen pay yet, but unlocked it doesn't work.
LOS 15.1- GTi9506
wkwk said:
Any luck with this?. Havent tried lock screen pay yet, but unlocked it doesn't work.
LOS 15.1- GTi9506
Click to expand...
Click to collapse
Google switched the API last week and rebranded Android Pay as Google pay
https://www.xda-developers.com/google-pay-android-pay-google-wallet/
Have you tried installing Google Pay?
https://play.google.com/store/apps/details?id=com.google.android.apps.walletnfcrel&hl=en
tsongming said:
Google switched the API last week and rebranded Android Pay as Google pay
https://www.xda-developers.com/google-pay-android-pay-google-wallet/
Have you tried installing Google Pay?
https://play.google.com/store/apps/details?id=com.google.android.apps.walletnfcrel&hl=en
Click to expand...
Click to collapse
Yes same issue.
Interestingly, upgrading to official LOS 15.1 this week completely resolved the issue. Google Pay works great unlocked, now.
lastconfederate2 said:
Interestingly, upgrading to official LOS 15.1 this week completely resolved the issue. Google Pay works great unlocked, now.
Click to expand...
Click to collapse
It will probably work in Lineage 14.1 once its been updated for the newer api.
When I first booted the phone I checked for Widivine level and it came back with level 1.
Now after rooting with Magisk I noticed the device marked as being "not certified" in Play Store and only having Widivine level 3.
My understanding is that the unlock leads to this but so far (on my OP 3, 3T and 5T) rooting with Magisk and installing a custom kernel, my devices would still be "certified".
I am wondering if things changed for Android Pie, or if e.g. installing Magisk with preserving DM-Verity would help. I was tempted to give this a try but verity errors are quite annoying and I don't want to completely wipe phone just to play around with that switch.
Any ideas?
dreinulldrei said:
When I first booted the phone I checked for Widivine level and it came back with level 1.
Now after rooting with Magisk I noticed the device marked as being "not certified" in Play Store and only having Widivine level 3.
My understanding is that the unlock leads to this but so far (on my OP 3, 3T and 5T) rooting with Magisk and installing a custom kernel, my devices would still be "certified".
I am wondering if things changed for Android Pie, or if e.g. installing Magisk with preserving DM-Verity would help. I was tempted to give this a try but verity errors are quite annoying and I don't want to completely wipe phone just to play around with that switch.
Any ideas?
Click to expand...
Click to collapse
This seems to be an issue with Magisk and some versions of OxygenOS.
There is a GitHub issue about that: https://github.com/topjohnwu/Magisk/issues/585
I read a comment in another thread that if you use magisk hide for the play store, then wipe data from the play store app you'll be good to go. immediately after rooting I checked the play store app in the magisk hide section and haven't had an issue.
Pain-N-Panic said:
I read a comment in another thread that if you use magisk hide for the play store, then wipe data from the play store app you'll be good to go. immediately after rooting I checked the play store app in the magisk hide section and haven't had an issue.
Click to expand...
Click to collapse
I just did exactly what you said. In magiskhide check the box for google play store. Force stop play store and wipe it's data. Reopen play store. No longer marked "not certified"
You'll still only have widevine 3. Download "drm info" from the play store and you'll still see L3 not L1. I believe it's the bootloader being unlocked that causes it.
Thanks guys, Play store now says certified but Widevine still only offers L3.
dreinulldrei said:
Thanks guys, Play store now says certified but Widevine still only offers L3.
Click to expand...
Click to collapse
Has been asked several times.
Bootloader unlocked = L3
Always
https://storage.googleapis.com/wvdocs/Widevine_DRM_Getting_Started_Devices.pdf
Thanks, yes, but since it - to my understanding - can be remedied by re-locking, the corresponding code or keys must be somewhere. It's like Safety Net, which is bypassed by Magisk ...
Has anyone else had issues getting Netflix on their phone? Even if I sideload it it states its not compatible with my device. Any ideas?
Latest update installed
Magisk and edxposed installed. Have hidden magisk and edxposed from the app but still no joy. Contacted Netflix support and of course they told me to contact my device manufacturer
Haunt3r said:
Has anyone else had issues getting Netflix on their phone? Even if I sideload it it states its not compatible with my device. Any ideas?
Latest update installed
Magisk and edxposed installed. Have hidden magisk and edxposed from the app but still no joy. Contacted Netflix support and of course they told me to contact my device manufacturer
Click to expand...
Click to collapse
you have issues with netflix cause you are rooted. you need to make sure your phone passes safteynet. and make sure you hide netflix if that still dont work.
I dont know if it works on this phone but I search modules for fingerprint in the searchbar it should be the first thing that pops up to download you need to download a busybox module too and in google store download a terminal after all installed you need to type PROPS in terminal and fallow the instructions if the phone is not on there its not compatible
I am waiting for my unlock code so I can get my phone rooted so I not 100% sure but that is what fixed it on my moto g7 power.
Haunt3r said:
Has anyone else had issues getting Netflix on their phone? Even if I sideload it it states its not compatible with my device. Any ideas?
Latest update installed
Magisk and edxposed installed. Have hidden magisk and edxposed from the app but still no joy. Contacted Netflix support and of course they told me to contact my device manufacturer
Click to expand...
Click to collapse
It's probably edexposed that is tripping safetynet. Even with that xposed module, it's not a true safetynet hide. I am rooted and have Netflix working (from the play store). But I can pass safetynet. Try installing safetynet check app and see if it passes...don't check from magisk. https://play.google.com/store/apps/details?id=com.scottyab.safetynet.sample
Had to remove edxposed as well as use props. Magisk triggers safetynet currently. Everything's working good now. Thanks guys.
Hey, all
Successfully upgraded and rooted my phone on Android 11 and have now discovered my banking app isn't working; it's crashing within seconds of trying to start.
I have Magisk itself hidden and my banking app, Navy Federal, checked under the MagiskHide section but it's not making a difference.
Anyone else having this issue and/or figured a way to resolve it?
Magisk hide isn't always going to work.
You could try hiding the magisk name but beyond that there isn't a lot you can do
@PassingInTime Are you passing the Safetynet check?
Yeh, see if magisk mgr is passing safety net...
XxSUPRAxX said:
@PassingInTime Are you passing the Safetynet check?
Click to expand...
Click to collapse
Magisk shows all pass. Firefox is actually crashing on launch now as well. Not sure what's going on yet, but I'm hoping to avoid resetting...again.
PassingInTime said:
Magisk shows all pass. Firefox is actually crashing on launch now as well. Not sure what's going on yet, but I'm hoping to avoid resetting...again.
Click to expand...
Click to collapse
What banking app has the issue? Ill test it out on my device.
Sometimes it's bank sided, when I rooted my device after updating to A11, my bank app didn't work and I thought it had something to do with root.
I ended up calling them, it turned out that they didn't update the app and after a couple of days I received an update and it's working again.
If it worked for you before root, try to hide Magisk, does it pass safetynet anyway?
EDIT: Just noticed that it passes safetynet, I'd suggest to restore stock boot and see if it works, if so, try rooting again.
Are you using beta canary?
roote3 beta 3 NFCU app works for me. magisk hidden and magisk name changed.
Enable USB debugging and use ADB logcat ... Start the app ... Stop the logcat and check for errors in the log ... Maybe you'll find why in there
cali310 said:
roote3 beta 3 NFCU app works for me. magisk hidden and magisk name changed.
Click to expand...
Click to collapse
Finally works for me too - took them awhile.