Database Users

MI 9T soft bricked, how to go back to Global Stable

After install to EU dev. 9.7.18
NO recovery more and no access to the System, only bootloop, just Soft bricked my phone.
So I decided to install into fastboot mode the global stable 10.3.6 tgz and modified the anti rollback error.
here the rom
https://mifirm.net/model/davinci.ttt#fb-mif
here the anti rollback tutorial
https://www.xda-developers.com/xiaomi-anti-rollback-protection-brick-phone/
Flash then with MiFlash (choose an older version and don't flag lock bootloader)
https://www.xiaomiflash.com/download/
regards

stefano alegnini said:
After install to EU dev. 9.7.18
NO recovery more and no access to the System, only bootloop, just Soft bricked my phone.
So I decided to install into fastboot mode the global stable 10.3.6 tgz and hacked the anti rollback error.
here the rom
https://mifirm.net/model/davinci.ttt#fb-mif
here the anti rollback tutorial
https://www.xda-developers.com/xiaomi-anti-rollback-protection-brick-phone/
Flash then with MiFlash (don't flag lock bootloader)
https://www.xiaomiflash.com/download/
regards
Click to expand...
Click to collapse
fastboot Rom when checked flash-all.bat CURRENT_ANTI_VER=0 , but my current device is Anti 1. Can i proceed install through Miflash tool?
what did you mean by hacked the antirollback error?

DtoD said:
fastboot Rom when checked flash-all.bat CURRENT_ANTI_VER=0 , but my current device is Anti 1. Can i proceed install through Miflash tool?
what did you mean by hacked the antirollback error?
Click to expand...
Click to collapse
If your device is 1 (anti rollback enabled) the TGZ rom must be 1 or major.
Open flash-all.bat in a text editor like Notepad++ and look for the following line: set CURRENT_ANTI_VER=#
That number (#) is the rollback index of the MIUI version you want to flash. If that number is equal to or greater than your current rollback index, then it’s safe to flash in TWRP, Mi Flash, etc. If that number is less than your current rollback index
what did you mean by hacked the antirollback error?
modified...

stefano alegnini said:
If your device is 1 (anti rollback enabled) the TGZ rom must be 1 or major.
Open flash-all.bat in a text editor like Notepad++ and look for the following line: set CURRENT_ANTI_VER=#
That number (#) is the rollback index of the MIUI version you want to flash. If that number is equal to or greater than your current rollback index, then it’s safe to flash in TWRP, Mi Flash, etc. If that number is less than your current rollback index
what did you mean by hacked the antirollback error?
modified...
Click to expand...
Click to collapse
Friend, I also have the same question ... Is something concrete modified? My software was the global version 10.3.9 and now I can not repair with the fastboot version 10.3.6 ...
What I can do?
How did you solve it?

I did something different, easier in my opinion:
• Downloaded a fastboot rom and uncompress it
• extracted the files: system.img, recovery.img and boot.img
• Flashed them with CMD/Terminal
• Erased data
• Rebooted

menphis said:
Friend, I also have the same question ... Is something concrete modified? My software was the global version 10.3.9 and now I can not repair with the fastboot version 10.3.6 ...
What I can do?
How did you solve it?
Click to expand...
Click to collapse
I just flashed fastboot rom , everything is alright. My Anti was 1 but the rom's Anti was 0. I flashed it through Miflash tool. Everything seems to work well

DtoD said:
I just flashed fastboot rom , everything is alright. My Anti was 1 but the rom's Anti was 0. I flashed it through Miflash tool. Everything seems to work well
Click to expand...
Click to collapse
can you explain a little more details, please?
or from which versions you have successfully flashed?

cmoegele said:
can you explain a little more details, please?
or from which versions you have successfully flashed?
Click to expand...
Click to collapse
I was on Developer beta, bootlooping without recovery, Only fastboot continue was working
I flashed this fastboot rom from the OP https://mifirm.net/model/davinci.ttt#fb-mif
Download fastboot rom > Extract > use Miflash( Download here https://www.xiaomiflash.com/download/ ) > flash Fastboot rom

I have mi9t and i use OSX, dont have windows. when installing xeu dev 9.7.18 twrp gone, i downloaded 10.3.6 stable global fastboot rom. i unpack rom and edited flash_all file as in osx comad for fastboot is not as on windows in os x is ./fastboot
so in any fastboot writen on flash_all i had to put prefix ./ and in terminal i flash fastboot rom, no problems about antiroll back.

Any way on how to change the Region? it got locked to China
solved by flashing cust.img

stefano alegnini said:
After install to EU dev. 9.7.18
NO recovery more and no access to the System, only bootloop, just Soft bricked my phone.
So I decided to install into fastboot mode the global stable 10.3.6 tgz and modified the anti rollback error.
here the rom
https://mifirm.net/model/davinci.ttt#fb-mif
here the anti rollback tutorial
https://www.xda-developers.com/xiaomi-anti-rollback-protection-brick-phone/
Flash then with MiFlash (don't flag lock bootloader)
https://www.xiaomiflash.com/download/
regards
Click to expand...
Click to collapse
So basically there is anti rollback protection concerning EU rom and global rom?

Pheggas said:
So basically there is anti rollback protection concerning EU rom and global rom?
Click to expand...
Click to collapse
yes, from weekly EU to global stable

stefano alegnini said:
yes, from weekly EU to global stable
Click to expand...
Click to collapse
One of users told me there is no anti rollback protection.
Odoslané z Mi 9T pomocou Tapatalku

There is no anti roll-back in our phone. You can safely flash everything for our davinci I think. I flashed 10.3.7.0 and all was working fine.

DtoD said:
I was on Developer beta, bootlooping without recovery, Only fastboot continue was working
I flashed this fastboot rom from the OP https://mifirm.net/model/davinci.ttt#fb-mif
Download fastboot rom > Extract > use Miflash( Download here https://www.xiaomiflash.com/download/ ) > flash Fastboot rom
Click to expand...
Click to collapse
Does developer rom released on davinci?

rEsonancE_0404 said:
Does developer rom released on davinci?
Click to expand...
Click to collapse
Yes it did https://forum.xda-developers.com/mi-9t/how-to/rom-miui-10-xiaomi-eu-t3949848
But you will lose your recovery after flashing the Developer version.

Guys I need help I flash the latest ue developer ROM got boot loop and the I flashed the global ROM via mi flash but I my phone doesn't boot up pls help me

Benfatica said:
Guys I need help I flash the latest ue developer ROM got boot loop and the I flashed the global ROM via mi flash but I my phone doesn't boot up pls help me
Click to expand...
Click to collapse
Sometimes the unlock text disappear leaving the mi.com logo but it just turns it self off

stefano alegnini said:
After install to EU dev. 9.7.18
NO recovery more and no access to the System, only bootloop, just Soft bricked my phone.
So I decided to install into fastboot mode the global stable 10.3.6 tgz and modified the anti rollback error.
here the rom
https://mifirm.net/model/davinci.ttt#fb-mif
here the anti rollback tutorial
https://www.xda-developers.com/xiaomi-anti-rollback-protection-brick-phone/
Flash then with MiFlash (don't flag lock bootloader)
https://www.xiaomiflash.com/download/
regards
Click to expand...
Click to collapse
The mi flash.zip gives me error

Benfatica said:
The mi flash.zip gives me error
Click to expand...
Click to collapse
Try an older version

[GUIDE] [ROM] How to Flash BeastROM to Mi CC9e

Hey guys,
Although Mi CC9e (laurus) has been released for some days, there's few discussion on this device. The reason why I bought laurus is because I think it will share a community with Mi A3 (laurel_sprout), and it's easier to get laurus in China (with 6GB RAM). And indeed, laurus use exactly the same kernel with laurel_sprout. Most people think laurus is A only and laurel_sprout is A/B, which is almost, but not entirely correct. Devices launched with Android 9 are mandatory to use system-as-root.
In previous versions of Android, devices that didn't support A/B updates could mount the system image under the /system directory. In Android 9, the root of the system image is mounted as the root of the device.
Click to expand...
Click to collapse
In short, laurus MUST flash A/B image instead of A only, just like Mi 9 (cepheus) and Mi Mix 3 (perseus).
I assume that your'phone is unlocked and you've configured ADB and Fastboot.
So, let's start.
1. Flash TWRP
Reboot your laurus to Fastboot with Power + Volume Down.
There's a available TWRP from Chinese developer LR.Team
Download Link
The batch script is in Chinese, but I'm sure you know what to do if you're familar with Fastboot.
Code:
fastboot flash recovery recovery-TWRP-3.3.1-0914-XIAOMI_CC9E-CN-wzsx150.img
2. Flash BeastROM 1.6
Although BeastROM 2.0 has released but I can't get it work. It just display Mi logo and then jump to Fastboot. Most other GSIs won't work as well, it dosen't boot at all. So the only choose is BeastROM 1.6 for laurel_sprout @mdeejay.
BeastROM 1.6
unzip it, and what we need to do is flash system.img ONLY.
Code:
fastboot flash system system.img
And then reboot to TWRP, wipe data partition.
Edited:
You can find your vbmeta in fastboot ROM of laurus.
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
This command is NOT NEEDED if you can disable dm-verity via magisk. You can't boot without disabling dm-verity (stuck on Logo). I don't know how it works. Need some help from devs.
3. Flash Magisk
You HAVE TO flash magisk, or it will stuck on boot animation.
You can do it by "Install Root" in Advanced of TWRP.
Or do it manually by flash Magisk.
4. Flash GApps (Optional)
OpenGApps
Just Flash it in TWRP, nothing more to say. Maybe you need to wipe data again.
I think everything is perfect for now, execpt it's Android 9 instead of 10. At least you can get most of features in Mi A3 and get rid of stupid MIUI
Some stupid idea: for people who wanna get MIUI in laurel_sprout, you can flash system.img in fastboot of laurus. I don't think it will work but it worth trying.
I've tried flashing laurel_sprout image into laurus, it can boot, but it won't work. Screen blinks and it get stuck on welcome page, touching works though.
Fastboot of laurus
Fastboot of laruel_sprout
For people who prefer stock A3 Android One ROM, Here is the method I've tested
con_sau_may_tinh said:
mi cc9e can use stock rom of mi a3 without root, this mean bank app will work perfect
1- flash full rom with miflash (any lower version will not boot) http://bigota.d.miui.com/V10.2.13.0...FMCNXM_20190830.0000.00_9.0_cn_fc9f51f46d.tgz
2- download rom of mi a3, extract file system.img only
http://bigota.d.miui.com/V10.3.4.0....0.PFQMIXM_20190815.0000.00_9.0_00838b4c0e.tgz
3- go to fastboot and flash (vbmeta of micc9e)
fastboot flash system system.img
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot reboot
Click to expand...
Click to collapse

i flash only system but, my phone stuck on fastboot mode
please help

vanly6.2 said:
i flash only system but, my phone stuck on fastboot mode
please help
Click to expand...
Click to collapse
Are your device Mi CC9e instead of Mi A3? Make sure you're flashing BeastROM 1.6 instead of 2.0 or you'll get stuck on fastboot. And maybe you need to format your data partition in TWRP.

Crosstyan said:
Are your device Mi CC9e instead of Mi A3? Make sure you're flashing BeastROM 1.6 instead of 2.0 or you'll get stuck on fastboot. And maybe you need to format your data partition in TWRP.
Click to expand...
Click to collapse
i has flash ok, but i can use finger, you have problem as me ?

vanly6.2 said:
i has flash ok, but i can use finger, you have problem as me ?
Click to expand...
Click to collapse
Fingerprint sensor works for me.

Can i back to miui if something wrong,or on bootloop

oska3 said:
Can i back to miui if something wrong,or on bootloop
Click to expand...
Click to collapse
Of course you can, just flash the fastboot ROM of laurus.

Stug on fastboot too
How i can go in twrp

oska3 said:
Stug on fastboot too
How i can go in twrp
Click to expand...
Click to collapse
Power and Volume up can make it boot into Recovery.
But if you flashed dtbo and vbmeta of BeastROM 1.6, or maybe you wipe your system partition. , it will be stuck at fastboot and cannot boot (or enter recovery)
One way to fix this is disable dm-verity, just use magisk, you can do it by "Install Root" in Advanced of TWRP. (Flashing magisk manully does the same job)
(However, you can't enter TWRP, so this won't work. )
Another way to disable dm-verity is flash vbmeta with --disable-verity --disable-verification, but I'm not sure whether it works.
Your best chioce is flash the fastboot ROM of laurus and do it again. Remerber to flash magisk in TWRP after flashing system.img, I made a mistake that magisk is not included in BeastROM and you must flash it to disable dm-verity or it will never boot.

im fix it and its ok now,how,i dont know
finaly miui gone,yyyuuhuu

If u update magisk and stug on bootloop,u can start on twrp and flash magisk manualy and reboot in beastrom again
---------- Post added at 09:32 PM ---------- Previous post was at 08:37 PM ----------
Just dont use or update to magisk 20,stug on bootloop

Crosstyan said:
Hey guys,
Although Mi CC9e (laurus) has been released for some days, there's few discussion on this device. The reason why I bought laurus is because I think it will share a community with Mi A3 (laurel_sprout), and it's easier to get laurus in China (with 6GB RAM). And indeed, laurus use exactly the same kernel with laurel_sprout. Most people think laurus is A only and laurel_sprout is A/B, which is almost, but not entirely correct. Devices launched with Android 9 are mandatory to use system-as-root.
In short, laurus MUST flash A/B image instead of A only, just like Mi 9 (cepheus) and Mi Mix 3 (perseus).
I assume that your'phone is unlocked and you've configured ADB and Fastboot.
So, let's start.
1. Flash TWRP
Reboot your laurus to Fastboot with Power + Volume Down.
There's a available TWRP from Chinese developer LR.Team
Download Link
The batch script is in Chinese, but I'm sure you know what to do if you're familar with Fastboot.
Code:
fastboot flash recovery recovery-TWRP-3.3.1-0914-XIAOMI_CC9E-CN-wzsx150.img
2. Flash BeastROM 1.6
Although BeastROM 2.0 has released but I can't get it work. It just display Mi logo and then jump to Fastboot. Most other GSIs won't work as well, it dosen't boot at all. So the only choose is BeastROM 1.6 for laurel_sprout @mdeejay.
BeastROM 1.6
unzip it, and what we need to do is flash system.img ONLY.
Code:
fastboot flash system system.img
And then reboot to TWRP, wipe data partition.
Edited:
You can find your vbmeta in fastboot ROM of laurus.
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
This command is NOT NEEDED if you can disable dm-verity via magisk. You can't boot without disabling dm-verity (stuck on Logo). I don't know how it works. Need some help from devs.
3. Flash Magisk
You HAVE TO flash magisk, or it will stuck on boot animation.
You can do it by "Install Root" in Advanced of TWRP.
Or do it manually by flash Magisk.
4. Flash GApps (Optional)
OpenGApps
Just Flash it in TWRP, nothing more to say. Maybe you need to wipe data again.
I think everything is perfect for now, execpt it's Android 9 instead of 10. At least you can get most of features in Mi A3 and get rid of stupid MIUI
Some stupid idea: for people who wanna get MIUI in laurel_sprout, you can flash system.img in fastboot of laurus. I don't think it will work but it worth trying.
I've tried flashing laurel_sprout image into laurus, it can boot, but it won't work. Screen blinks and it get stuck on welcome page, touching works though.
Fastboot of laurus
Fastboot of laruel_sprout
Click to expand...
Click to collapse
First of all, tks for getting the first not official rom for the cc9e! Really appreciated.
Can you please confirm if this rom has Spanish Language included? Tks!

im confirm,there is espanol language and almost all popular,and work like a charm

oska3 said:
im confirm,there is espanol language and almost all popular,and work like a charm
Click to expand...
Click to collapse
Tks buddy! I will try it

Thankyou heaps for for this post.
I will be back in 168hrs (mi unlock) to attempt （⌒▽⌒）.

help
1)i flash fastboot stocck laurus rom
2)then flash twrp (always use files that you provide in this thread)
3)then flash system.img
4)then reboot to twrp >format data>yes
5)then install magisk 19.4 and pico gapps
6)then repeat format data and reboot
but always phone stuck on "G" logo booting
also try to flash vbmeta from stock after 4)
also try without gapps
also try vbmeta from beast 1.6
nothing
please help me
what i do wrong
sorry for my bad english

Some of us Mi A3 users want to use Miui 11 from CC9e, how possible is that. Could you give a tutorial?
Android one is snappy on mi a3, with 6g ram on CC9e it will be really smooth.

Xiaomi Mi A3 - Неофициальные прошивки miui 10 port,4pda

aleksbrain said:
1)i flash fastboot stocck laurus rom
2)then flash twrp (always use files that you provide in this thread)
3)then flash system.img
4)then reboot to twrp >format data>yes
5)then install magisk 19.4 and pico gapps
6)then repeat format data and reboot
but always phone stuck on "G" logo booting
also try to flash vbmeta from stock after 4)
also try without gapps
also try vbmeta from beast 1.6
nothing
please help me
what i do wrong
sorry for my bad english
Click to expand...
Click to collapse
Try to use the root in Advanced tab of TWRP.

mi cc9e can use stock rom of mi a3 without root, this mean bank app will work perfect
1- flash full rom with miflash (any lower version will not boot) http://bigota.d.miui.com/V10.2.13.0...FMCNXM_20190830.0000.00_9.0_cn_fc9f51f46d.tgz
2- download rom of mi a3, extract file system.img only
http://bigota.d.miui.com/V10.3.4.0....0.PFQMIXM_20190815.0000.00_9.0_00838b4c0e.tgz
3- go to fastboot and flash (vbmeta of micc9e)
fastboot flash system system.img
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot reboot

Ticwatch pro 2020 stock firmware

I am using the ticwatch pro 2020. I tried to flash a custom firmware and now it wont boot into anything but fastboot. I was wondering if anyone could help me find the stock firmware files

No stock files are avaiable yet, you have to get it back to the repair center

Coaleb said:
I am using the ticwatch pro 2020. I tried to flash a custom firmware and now it wont boot into anything but fastboot. I was wondering if anyone could help me find the stock firmware files
Click to expand...
Click to collapse
https://mega.nz/#F!cVVBRaxL
[DECRYPTION KEY]
iZbWXMs8vabDW1szJz1hgg
- fastboot flash aboot aboot.img
- fastboot flash boot boot.img
- fastboot flash vendor vendor.img
- fastboot flash system system.img
- fastboot format userdata
- fastboot format cache
- fastboot flash recovery recovery.img
- fastboot reboot

Hello, what process did you exactly use? I don't think there is stock firmware available for this watch but maybe we can help you to get the custom one running.

bootloop with twrp-3.3.1-12 (11.0.4)

Hello,
I want to install the twrp-3.3.1-12-davinci-mauronofrio.img with modified_vbmeta.img. I have installed MIUI Global 11.0.4!
It´s not working, I get always a bootloop
why it´s not working?? Need help, thanks

fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot flash recovery twrp.img
Works for me every time. Verity breaks your boot for security reasons, so it needs disabled.

xer0o0x said:
Hello,
I want to install the twrp-3.3.1-12-davinci-mauronofrio.img with modified_vbmeta.img. I have installed MIUI Global 11.0.4!
It´s not working, I get always a bootloop
why it´s not working?? Need help, thanks
Click to expand...
Click to collapse
Or just use the official TWRP.
No need to modify anything:
https://eu.dl.twrp.me/davinci/

Can't install any Custom ROM through recovery / Stuck in recovery bootloop

Hello
I have OrangeFox recovery on my phone and whenever I try to flash a custom rom then after rebooting to system it always brings me back to recovery. I tried this with MIUI Global ROM, Pixel Experience but the results are same.
I also tried through TWRP but still. After flashing a custom rom, it acts like the rom isn't flashed at all.
Any help will be appreciated.
Thank you.

Dartanw said:
Hello
I have OrangeFox recovery on my phone and whenever I try to flash a custom rom then after rebooting to system it always brings me back to recovery. I tried this with MIUI Global ROM, Pixel Experience but the results are same.
I also tried through TWRP but still. After flashing a custom rom, it acts like the rom isn't flashed at all.
Any help will be appreciated.
Thank you.
Click to expand...
Click to collapse
You read the how to from which rom? Maybe the only problem that you have to format not data. Maybe firmware?

Test this steps with your rom
[ROM][lavender][12L] VoltageOS 1.7 [OFFICIAL]
VoltageOS 12.1|L for Redmi Note 7/7S ABOUT Greetings, interested users! You have reached the gateway of a simplistic, no-frills pure AOSP experience that will not let you down in getting through every day uninterrupted by inconveniences, with...
forum.xda-developers.com

Easier then write.

And flash magisk after the first boot

Long time ago it happens to me too and solution was to flash latest firmware

I flashed newest firmware and then custom ROM. Still it boots to recovery.

Sorry got no idea to help, but what about trying the OrangeFox Recovery Project: https://forum.xda-developers.com/t/official-recovery-orangefox-recovery-project-r11-1.3941822/

I managed to flash newest orangefox without any problems, newest firmware and so on. I just don't get why it doesn't wanna boot to system.

Dartanw said:
I managed to flash newest orangefox without any problems, newest firmware and so on. I just don't get why it doesn't wanna boot to system.
Click to expand...
Click to collapse
Magisk, gapps? What u flash after the rom and you wipe and or format what before and or after? Make the steps right. Never had problem with my Redmi 5 plus, Note 7 and Mi Note 10 last.

joke19 said:
Magisk, gapps? What u flash after the rom and you wipe and or format what before and or after? Make the steps right. Never had problem with my Redmi 5 plus, Note 7 and Mi Note 10 last.
Click to expand...
Click to collapse
Nope. After flashing Pixel Experience or Global Xiaomi ROM I always reboot to system but it brings me back to recovery.
What i did step-by-step on newest OrangeFox
1, Wiped Cache, System, Internal Storage, Dalvik, Vendor
2. Flashed newest MIUI firmware
3. Flashed Pixel Experience
4. Reboot to system
And it brings me back to recovery.

Dartanw said:
Nope. After flashing Pixel Experience or Global Xiaomi ROM I always reboot to system but it brings me back to recovery.
What i did step-by-step on newest OrangeFox
1, Wiped Cache, System, Internal Storage, Dalvik, Vendor
2. Flashed newest MIUI firmware
3. Flashed Pixel Experience
4. Reboot to system
And it brings me back to recovery.
Click to expand...
Click to collapse
After flash not wipe format

joke19 said:
After flash not wipe format
Click to expand...
Click to collapse
Data

I have a similar problem:
fastboot oem device-info shows:
Code:
(bootloader) Verity mode: true
(bootloader) Device unlocked: true
(bootloader) Device critical unlocked: true
(bootloader) Charger screen enabled: false
OKAY [ 0.001s]
Finished. Total time: 0.001s
trying to
Code:
fastboot flash recovery twrp / orange *.img shows:
Sending 'recovery' (33804 KB) OKAY [ 1.148s]
Writing 'recovery' FAILED (remote: 'Error flashing partition : Device Error')
fastboot: error: Command failed
Phone is now stuck on fastboot. Rebooted once in redmi recovery but i can no longer. I am now downloading the official fastboot img to see if i can fix this.
If anyone has a solution let me know. Thanks.