Database Users

Pumpkin Octacore, help is needed.

Hello Folks,
i recently bought a Pumpkin Head Unit.
Description as follows:
PUMPKIN 32GB + 2GB Octa Core Android CarRadio Multimedia Player Opel
Modell: CN10-04202H-01A-DE1-FBA
ASIN: B075WPSSDS
CPU: Ultra Octa-T8
MCU: 5.3.19-11-81-453101-170502
System: V9.1.1_20170904.191626_KED3-5
Android: 6.0.1
I did a lot of reading / searching for Pumpkin Octacore etc. to find the appropriate forum for custom ROMs. But I just can’t find it.
So I am hoping that someone might be able to show me the way!
Best regards
WHV09

You could check here: https://forum.xda-developers.com/an...lopment/rom-malaysk-roms-mtcd-device-t3598908

surfer63 said:
You could check here: https://forum.xda-developers.com/an...lopment/rom-malaysk-roms-mtcd-device-t3598908
Click to expand...
Click to collapse
Thank you very much. Dank je wel
Could you tell me who you found out that my device is belonging into PX-5..just trying to understand!
Best regards

whv09 said:
Thank you very much. Dank je wel
Could you tell me who you found out that my device is belonging into PX-5..just trying to understand!
Best regards
Click to expand...
Click to collapse
Google gave me amazon.de via "pumpkin CN10-04202H-01A-DE1-FBA"
I was not 100% sure, but there is hardly any other possibility. I pointed you to that thread as it also helps you to identify your own unit if it is really an MTCD PX5, by looking at the settings "about my device"..

surfer63 said:
Google gave me amazon.de via "pumpkin CN10-04202H-01A-DE1-FBA"
I was not 100% sure, but there is hardly any other possibility. I pointed you to that thread as it also helps you to identify your own unit if it is really an MTCD PX5, by looking at the settings "about my device"..
Click to expand...
Click to collapse
As you can see i cant see alot...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

whv09 said:
As you can see i cant see alot...
Click to expand...
Click to collapse
it is allwinner T8, not the rockchip PX5

Thank you very much.
So i can only use the InDashNet Custom ROM´s in the link i postet or is there a chance to use malaysk as well?
https://forum.xda-developers.com/android-auto/android-head-units/indashnet-octa-core-lollipop-head-units-t3353188

I think you might find what you need in this thread: forum.xda-developers.com/android-auto/android-head-units/umecity-vw-allwinner-t8-2gb-32gb-7-1-2-t3704290/amp/

YT9216BJ firmware with Carplay not work

hello, I installed this firmware for YT9216BJ car radio (android 9.1 go, ui v6.8 and carplay), ZLINK is already installed on the system but the carplay does not work. When I open the app it tells me "Inactivated, click to activate" and "neither MFI nor Dev-id found" I use iphone X with ios 14.5.1. can someone help me? thank you

antoniopa89 said:
hello, I installed this firmware for YT9216BJ car radio (android 9.1 go, ui v6.8 and carplay), ZLINK is already installed on the system but the carplay does not work. When I open the app it tells me "Inactivated, click to activate" and "neither MFI nor Dev-id found" I use iphone X with ios 14.5.1. can someone help me? thank you
Click to expand...
Click to collapse
Unfortunately, you need custom firmware to make this work. Question is, why would you want CarPlay on an Android Head Unit? Why not just buy a CarPlay unit?

iceblue1980 said:
Unfortunately, you need custom firmware to make this work. Question is, why would you want CarPlay on an Android Head Unit? Why not just buy a CarPlay unit?
Click to expand...
Click to collapse
i bought this car stereo because android, i saw the carplay function and i thought it worked. I just asked. in case I buy the dongle

Did you find a solution?

antoniopa89 said:
i bought this car stereo because android, i saw the carplay function and i thought it worked. I just asked. in case I buy the dongle
Click to expand...
Click to collapse
Why not check out this guide that provides custom firmware and lots of improvements to YT9216BJ including UI, sound and connectivity. Might help you solve your issue with CarPlay as well.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Topway TS7 how to update Android ?

Hey
I have a TS7 model Can someone tell me how to update Android to version 11?
Regards
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Can someone also explain to me what the android version is? when I enter the settings and information about the system, I write that it is version 10.0 when i go through the program CPU-Z shows version 8.1.0 does anyone know what's going on with this?

dawid_11223 said:
View attachment 5637049View attachment 5637051Can someone also explain to me what the android version is? when I enter the settings and information about the system, I write that it is version 10.0 when i go through the program CPU-Z shows version 8.1.0 does anyone know what's going on with this?
Click to expand...
Click to collapse
Hello , i've the same problem, for me it's written android 10 !!

Mehdi330 said:
Hello , i've the same problem, for me it's written android 10 !!
Click to expand...
Click to collapse
Did you fine anything to update since last post ?

Hi guys! I'm new here, I came with a problem. I bought a car navigation from China, more precisely Ts7 -2gb ram- 32gb rom. I went to update the canbus in the car choose section, where I downloaded and installed the packages compatible with my car. Unfortunately, I wanted to start the car while installing a package, the power in the car stopped, but also the screen on the ts7 stopped and did not start again. I sent it to a service, the guys told me that there is no current in the processor or memory, nor in the USB ports. can i do something else?

change Canbus Raise and update
after update turn off the engine of your car for 5 minutes and restart and configure your car

Benmoncef said:
change Canbus Raise and update
after update turn off the engine of your car for 5 minutes and restart and configure your car
Click to expand...
Click to collapse
It does not receive power on the processor or memory. I took it to the service and I was told that it does not enter recovery mode

hello anyone know if this radio TOPWAY TS7 need cabbus for dacia logan 2016 thanks

Es recomendable actualizar Topway TS7

Please help mi identify hardware - Uckazy 8259l HU (Alps 825x_pro) for bmw e70

Hi,
I am so confused, and would really appreciate help. I read numerous threads and comments, but not able to understand the unit i have.
I bought on aliexpress Uckazy 8259l model for bmw e70, which seems to be Alps 825x_pro according to CPUZ.
Unit so far is working ok, expect for really bad internet speed (mobile hotspot even tho i have fast internet on my phone), audio buzzing on AUX and random reboots when multiple apps are running (not frequent).
I used CPUZ (that always crashes after 10 seconds) and Inware to get these specs:
Brand: Alps
Product: full_825x_Pro
Model: 825x_pro
Resolution: 1920*720 (aliexpress specs states 1280*480)
Size: 12.82" (aliexpress specs states 10.25")
Hardware: AC8257V/WAB ( i was hoping it is 8259 as model name suggests)
Ram: 6gb, ROM: 128gb
Android 11, API 30
Needles to say, aliexpress seller support equals zero. No communication except sending user manual.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I am hoping someone can help me figure out the following:
is this Mediatek, Snapdragon, PX, somethinge else?
Is Alps known Chinese manufacturer that others just rebrand? Is this unit same as JunSun V1? - hoping to understand this, so i can focus on existing threads on XDA
Is the firmware the latest - not sure how to check and which can i use in case upgrade is needed (e.g. can i use JunSun firmware)
CPUZ says it is API 30, did developers do something to fake it or i can be sure i have android 11 unit?
Should i trust screen resolution that CPUZ and Inware are displaying or could this be incorrect info?
I aim to change launcher, and add custom boot animation/logo, but want to understand specs first
Thank you in advance for your help!

.

Does anyone can help us ? Thanks for advice

nowaq111 said:
I aim to change launcher, and add custom boot animation/logo
Click to expand...
Click to collapse
built-in root
Диск
files.sberdisk.ru
The firmware has not been verified and is used at your own risk
I do not bear responsibility for the bricks!!!

Wanna know more about this, please let us know if firmware fits good on unit.

xh4fk said:
Wanna know more about this, please let us know if firmware fits good on unit.
Click to expand...
Click to collapse
What size is it

MCU: XRC --> which head unit?

hello all, I'm a bit frustrated since I searched all over and could not find out what type of head unit I have, my MCU says:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
anyone has a clue how to upgrade etc.? thx a lot! best

I have a similar device for bmw f10. I have an MCU update (4 + 128 is an update of the device itself, here you need to know your parameters) and there is an OS, it's just an update of the android system here on the forum there is version 1.94, I have 1.97 (it allows you to enable the ID8 interface)

It's an odd ball unusual chinese origin headunit...

AlekseyFZ said:
I have a similar device for bmw f10. I have an MCU update (4 + 128 is an update of the device itself, here you need to know your parameters) and there is an OS, it's just an update of the android system here on the forum there is version 1.94, I have 1.97 (it allows you to enable the ID8 interface)
Click to expand...
Click to collapse
thank you. I have a 4+64 device.
It seems like 1.94 is not stable. Did you install 1.97 and it worked? Could you send me an information about the seller so I can get in contact? thx a lot

hallodu62 said:
thank you. I have a 4+64 device.
It seems like 1.94 is not stable. Did you install 1.97 and it worked? Could you send me an information about the seller so I can get in contact? thx a lot
Click to expand...
Click to collapse
https://aliexpress.ru/item/1005003945642155.html?spm=a2g2w.orderdetail.0.0.35a64aa69sy3Xv&sku_id=12000028669768032э
here is the link from whom I bought from, as I understand it, the OS update for these devices is almost the same for all of them, the only difference is the MCU. The seller just sent me the wrong update for the MCU (sent 4 + 128, and I have 8 + 128) and now 4gb works for me instead of 8gb. so I'm looking for someone who has an MCU XRC 8 + 128

ZLH_ID8_OS_8581_1.97 ONLY FOR BMW !!!! MCU: XRC and ZLH (I have MCU XRC everything works well, I did not check it on ZLH)
https://drive.google.com/file/d/1dw2PwO3Kfwk5V33QF7fNyi0dKOAKAmIL/view?usp=share_link
ID7 and ID8 switchable in BMW setup menu

ok, thank you!