Hey folks, I know I'm shooting a very long shot here for some luck, BUT, I am in the need for a stock ROM for the following device that just recently came into my shop and I can't seem to locate a valid DL link anywhere on the net for it (every alleged link seems broken). I seem to only come across other variants and sadly, I don't know which, if any, are variant compatible. The device currently is not bootable as it's stuck in Function 10 error (failed boot image) and doing the hard reset/device wipe does not correct the issue. So I'm hoping someone out there might have a backup of this ROM. I've also tried using every variant of the Huawei HiSuite to recover but they all say the device is not compatible for system restore support. The Bootloader is locked so I can't fastboot restore the device. The info I gave here I obtained using fastboot commands I found in a post here. I appreciate any help you guys can provide on this little problem.
Details are as follows:
Huawei P8 Lite (2015-10-18)
Build: V100R001C69b130
Region: Mexico
Related
All right this might not be "on the right track" thing but here goes
It has been more than six months since Idea cellular (India) released
the customized firmware version 11.126.16.00.356 for the Huawei E1732 (E173du-1) 7.2 Mbps USB modem,till this date there's no unlocking solution for the device due to this customization.
On doing some research on the subject I came across the fact that the device is not asking for the unlock code when a locked SIM/UIM is inserted in it because its maximum unlock retries left has already been set to 0.
I tried various tools but none of them was able to reset the counter.
I was able to extract the NVR using QPST and the EFS using Revskills (though I'm not sure I was able to extract the EFS completely) and perso.txt from the efs using EFS Explorer.
One more thing there's no firmware upgrade or downgrade available anywhere
to solve this problem.The only firmware available is the locked one its a 7zip based installer so the stuff inside it can be extracted using software like universal extractor.
I am attaching the stuff I have extracted from the modem and the locked Firmware itself.Any kind of help or guidance is welcomed.
A last try.
Huawei guys have eaten a lot of money from Idea cellular and set the default lock counter to 0 attempts left out of 10 if somehow this could be changed the device can be unlocked.Please I also tried to send AT command using Diag port but it returned with CME error 3 Help.
unlock huawei data card
i know how can unlock idea data card e1732.use ort _jtag
plz help i downgrade through this version firmware that you provided as attachment
but now
modem is not reading the idea sim also plz help me brother as soon as possible
plz
plz
plz
plz
e [email protected]
contact-+91-9475538134
How to unlock huawei e1732.?
Hey plz tell me how to unlock using ort_itag.....
Plz
At current moment free solution for one week provide inspire-device.com. We can unlock device and than compare resutls and make own solution...
How to extract firmware from modem.
i want to extract customized firmware version of 11.810.09.21.356 huawei E367
idea 21.6 Mbps
Thank
matt2k7 said:
All right this might not be "on the right track" thing but here goes
It has been more than six months since Idea cellular (India) released
the customized firmware version 11.126.16.00.356 for the Huawei E1732 (E173du-1) 7.2 Mbps USB modem,till this date there's no unlocking solution for the device due to this customization.
On doing some research on the subject I came across the fact that the device is not asking for the unlock code when a locked SIM/UIM is inserted in it because its maximum unlock retries left has already been set to 0.
I tried various tools but none of them was able to reset the counter.
I was able to extract the NVR using QPST and the EFS using Revskills (though I'm not sure I was able to extract the EFS completely) and perso.txt from the efs using EFS Explorer.
One more thing there's no firmware upgrade or downgrade available anywhere
to solve this problem.The only firmware available is the locked one its a 7zip based installer so the stuff inside it can be extracted using software like universal extractor.
I am attaching the stuff I have extracted from the modem and the locked Firmware itself.Any kind of help or guidance is welcomed.
Click to expand...
Click to collapse
Good Job:good::good::good::good:
Hey dudes,
i bought a second hand huawei p8 lite ALE-L21. Because of old stuff from the previous owner i wanted to reset the device but instead of only deleting the personal data i wiped everything.
End of the story is:
Booting to team win is possible, so i thing it should be possible to install a new firmware.
Problem: I don't know, what firmware i should use and on top how to install it. (yes, i was looking a lot for tutorials, but last device where i used a cfw was my galaxy s2)
Bought at vodafone germany with branding and single sim.
Best option would be a stock android 6
Looking forward for your help and just ask if you need further information
regards James
hi,you ca try here http://forum.xda-developers.com/p8lite/development/custom-rom-emui-4-0-android-6-0-ale-t3385630
Or flash via fastboot: recovery,cust,boot and sytem from b049(single-sim) or b052(dual sim) from update.app using huawei extractor
Then flash via local update b170/b171 then b564/b565.
This option is if you want a stock clean rom.
Hello all,
recently I got a used Huawei P9 lite VNS-L31 single SIM.
At the beginning it was branded with the Telekom Software (C150). I tried to debrand it with a guide I found on the internet.
Every thing went well but I noticed that the Buildnummber says: VNS-L31C900B161. Because I did it with the downgrade method with Test-keys package i guess.
The Problem is that I was trying to flash a Nougat update with the 3 Button method but during the installing procces I noticed that the package I flashed was the rollback package again.
So the Problem now is that I can't boot to bootloader, recovery and also the 3 Button method to flash a full firmware does not work.
The bootloader is locked (DC Unlocker doesn't recognize the phone so I cant get a code from there)and I guess I have to replace the Motherboard to get the phone working, but before I do that I thought I can ask here if there is any solution I that I can try.
Sorry for my bad English.
Hope that anyone has an Idea
good day everyone,
Please forgive me for asking this about the VNS-L23. I know there are tons on similar issues on the forum, I've been reading but non specific to my model. I also know that some of the solutions may work on the VNS-L23 variant as well but, I'm swamped and a bit confused. Can someone please assist in helping me restore the VNS-L23 back to stock OR the latest OS/firmware that is available?
I tried flashing a Nougat firmware, flash was successful but, when phone rebooted it would not go past the Huawei eRecovery, no matter what i try.
I tried flashing other VNS-L23 firmwares via 3 button method...no success
I tried 'Download latest version and recovery'...no success
I am able to get into Fastboot mode.
I tried to flash TWRP...i was unsuccessful (ADB did recognize device).....on FASTBOOT screen i see Phone: Locked FRP: unlocked...failed...command not allowed (i think)
I tried to use DC unlock-er to make some headway, of course i have to make a purchase costing 15 pounds. I always support these things but, i do not want to purchase and it still does not work.
According to DC unocker's detection:
Firmware: VNS-L23C605B120
FB LockState: Locked
USER LockState: Locked
You guys are awesome here and i know I'll get back my device to work....Please, I just bought it, not even 2 days and i cant even use it now because of this issue.
Many thanks in advance....Ronald
Hi, I've been researching and I wasn't able to successfully flash a custom ROM for this model.
Following the procedures in other threads tutorials, I was able to flash the following ROMS:
DOT-N-v1.2-20180717-y5-UNOFFICIAL.zip
lineage-14.1-20180715-UNOFFICIAL-y5.zip
To be able to flash them, I had to change the ´updater-script´ to be able to bypass the only Y5 model condition, as I was getting an error regarding my current model is: hwmya_L6737.
I wasn't able to run Lineage and DotOS I was able to boot but WiFi was unresponsive and it didn't detect any SIM card, making this ROM unusable...
I was able to restore my phone back to the state it was (Stock ROM and rooted) thanks to a TWRP backup.
I used this devices comparison to attempt to find equivalent ROMs according to the devices similar to MYA-L13 (which is the one I own) to no avail...
SO... I tried my best with these attempts but I'm back where I began!
I've been researching but I haven't found any other suitable Custom ROM for this device.
Can someone point me in the right direction, please?
OR:
Alternatively, I was able to flash and boot into the above DotOS version, but I wasn't able to detect the SIM card, and also the WiFi even if it seems to work, is disconected almost instantly... I guess it has something to do with the chipset or something beyond my knowledge.
Can someone please help me out regarding this?
Thanks in advance!
next time try to get more comercial, vastly sold, phone. choosing Qualcomm helps a lot
metafaniel said:
Hi, I've been researching and I wasn't able to successfully flash a custom ROM for this model.
Following the procedures in other threads tutorials, I was able to flash the following ROMS:
DOT-N-v1.2-20180717-y5-UNOFFICIAL.zip
lineage-14.1-20180715-UNOFFICIAL-y5.zip
To be able to flash them, I had to change the ´updater-script´ to be able to bypass the only Y5 model condition, as I was getting an error regarding my current model is: hwmya_L6737.
I wasn't able to run Lineage and DotOS I was able to boot but WiFi was unresponsive and it didn't detect any SIM card, making this ROM unusable...
I was able to restore my phone back to the state it was (Stock ROM and rooted) thanks to a TWRP backup.
I used this devices comparison to attempt to find equivalent ROMs according to the devices similar to MYA-L13 (which is the one I own) to no avail...
SO... I tried my best with these attempts but I'm back where I began!
I've been researching but I haven't found any other suitable Custom ROM for this device.
Can someone point me in the right direction, please?
OR:
Alternatively, I was able to flash and boot into the above DotOS version, but I wasn't able to detect the SIM card, and also the WiFi even if it seems to work, is disconected almost instantly... I guess it has something to do with the chipset or something beyond my knowledge.
Can someone please help me out regarding this?
Thanks in advance!
Click to expand...
Click to collapse
Hi, how did you change the updater script file? I have an Y6 MYA-L11 phone but i'm not able to skip model error message (I tried to change all "SCL-L02" with "hwmya_L6737" in the updater script file but it didn't work).
Another question, did you finally find a working rom?