Tested on my own KB2003, work flawlessly. Useful for many cases.
I followed the GUIDE of @s3axel here : https://forum.xda-developers.com/t/...n-os-stock-recovery-with-adb-enabled.4084487/
All credits to him.
Basically, this modded Recovery just saved my a** )))) Just unzip using 7z then flash it to Recovery as normal.
LinhBT said:
Tested on my own KB2003, work flawlessly. Useful for many cases.
I followed the GUIDE of @s3axel here : https://forum.xda-developers.com/t/...n-os-stock-recovery-with-adb-enabled.4084487/
All credits to him.
Basically, this modded Recovery just saved my a** )))) Just unzip using 7z then flash it to Recovery as normal.
Click to expand...
Click to collapse
Can you share your file?
Rootk1t said:
Can you share your file?
Click to expand...
Click to collapse
Sure man, find attachment
Hi, I am facing a strange issue on OOS12 not able to factory reset or enter stock recovery it says boot/recovery.img damaged flash the correct one or contact support can any one help me out with this issue.
houstontaxi said:
Hi, I am facing a strange issue on OOS12 not able to factory reset or enter stock recovery it says boot/recovery.img damaged flash the correct one or contact support can any one help me out with this issue.
Click to expand...
Click to collapse
unpack your firmware, extract stock recovery.img and flash it.
But for flashing do I need to unlock bootloader or it can be done without unlocking?
houstontaxi said:
But for flashing do I need to unlock bootloader or it can be done without unlocking?
Click to expand...
Click to collapse
As far as i remember to flash partitions with stock firmware you don't need unlocked bootloader.
Rootk1t said:
As far as i remember to flash partitions with stock firmware you don't need unlocked bootloader.
Click to expand...
Click to collapse
If it needs to flash recovery the same way as we do for custom roms like fastboot flash recovery in platform tools then i tried that doesn't work to make it work bootloader needs to be unlocked I did that(unlocked the boot loader) then flashed stock recovery and it worked but after locking the boot loader with fastboot oem lock same issue happened again couldn't boot into recovery.
houstontaxi said:
But for flashing do I need to unlock bootloader or it can be done without unlocking?
Click to expand...
Click to collapse
To flash ANY partitions, u must unlock bootloader even if the partition is critical or not. And to prevent the boot/recovery image damaged error, u must flash stock boot/recovery images along with vbmeta.img ( also extracted from stock, same build ).
LinhBT said:
To flash ANY partitions, u must unlock bootloader even if the partition is critical or not. And to prevent the boot/recovery image damaged error, u must flash stock boot/recovery images along with vbmeta.img ( also extracted from stock, same build ).
Click to expand...
Click to collapse
I'm gonna try this also need to know if I have to flash boot.img and recovery.img as there are two files when extracted from the stock rom
houstontaxi said:
I'm gonna try this also need to know if I have to flash boot.img and recovery.img as there are two files when extracted from the stock rom
Click to expand...
Click to collapse
Both, boot.img and recovery.img , also in some case, u must flash dtbo.img too. I dont know the exact situation of you so my advise is to flash both boot.img recovery.img dtbo.img and vbmeta.img
LinhBT said:
Both, boot.img and recovery.img , also in some case, u must flash dtbo.img too. I dont know the exact situation of you so my advise is to flash both boot.img recovery.img dtbo.img and vbmeta.img
Click to expand...
Click to collapse
I'm gonna try that thanks for the help and I hope it resolves my issue with OOS A12 recovery as I don't face this kind of issue on OOS11
1
LinhBT said:
Both, boot.img and recovery.img , also in some case, u must flash dtbo.img too. I dont know the exact situation of you so my advise is to flash both boot.img recovery.img dtbo.img and vbmeta.img
Click to expand...
Click to collapse
Hello, tell me that your recovery cannot decrypt the date section? I need to extract data from the phone, the phone won't boot into the system, I tried to boot into your recovery but I can't access the folders.
lenox30 said:
Hello, tell me that your recovery cannot decrypt the date section? I need to extract data from the phone, the phone won't boot into the system, I tried to boot into your recovery but I can't access the folders.
Click to expand...
Click to collapse
This is simply Stock Recovery with ADB enabled bro. It only can help u in some tasks which need to access adb via Recovery, it won't help to decrypt ur device and/or have any functions as other custom recovery
Related
Hi guys
I forget to do a nandroid backup accidentally before test a build of cm12.1 that i make, the problem now installation stuck at 90%, and no progress after that, many tries on internal and external sdcard and with 2 different firmware, (perhaps was for dual sim verison) any solution for that before bring to assistance?
P.S: each day did new progress for cm12.1, hope to got booted rom.
Can't you flash the B052 version with Fastboot?
https://mega.nz/#!lEcGQZCC!X2fmOZ-ShY-Kx-9lwnSUN16Vo52_aU0i4K1KmdBW64Q
Normally you will then be on stock boot, recovery and system images.
olrak said:
Can't you flash the B052 version with Fastboot?
https://mega.nz/#!lEcGQZCC!X2fmOZ-ShY-Kx-9lwnSUN16Vo52_aU0i4K1KmdBW64Q
Normally you will then be on stock boot, recovery and system images.
Click to expand...
Click to collapse
Yes fastboot is working, will report if work, with the following order?
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
???
services in italy are really slow like one month for a stupid reparation.
No, all the commands are normally in a FLASH-ALL.bat file (yeah windows )
Commands are:
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash cust cust.img
mfastboot flash system system.img
olrak said:
No, all the commands are normally in a FLASH-ALL.bat file (yeah windows )
Commands are:
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash cust cust.img
mfastboot flash system system.img
Click to expand...
Click to collapse
alright, so should use mfastboot instead of fastboot?
Problem solved, thanx a lot :good::good::good::good::good:
hows your progress on that cm12.1 build that youre workin on?
ruben parra said:
hows your progress on that cm12.1 build that youre workin on?
Click to expand...
Click to collapse
i got progress on boot.img, we have hope
haky 86 said:
i got progress on boot.img, we have hope
Click to expand...
Click to collapse
Good luck man , I hope we get a custom rom soon
AmINoS007 said:
Good luck man , I hope we get a custom rom soon
Click to expand...
Click to collapse
I almost finish a cm-12.1 and doesn't boot due to blobs issue and still cannot copy them to the build :/
Probs
Hi everyone
What can I do to upgrade from b052 (after flash with fastboot ) because this Rom cause too much problems to my Huawei p8 lite so if you have a link for download an upgrade to replace B052
Then
haky 86 said:
Problem solved, thanx a lot :good::good::good::good::good:
Click to expand...
Click to collapse
Then did you uptade you're android system?is it possible to install new firmware from B052
So i was recording a video, when it entered a state where I had to reboot the phone. I did so, and it got stuck. I did a hard reset. The phone then gets stuck at bootloader unlocked. I entered fastboot, selected recovery, and it gets stuck at the twrp logo. Any ideas? I also re-flashed twrp and it still get stuck.
Can you boot TWRP with 'fastboot boot twrp.img' and do anything? (Replace 'twrp.img' with your TWRP image filename)
If not, try fastboot flashing back to stock, but it kind of sounds like your emmc (internal storage chip) might have take a dump. Very unusual, but not unheard of.
acejavelin said:
Can you boot TWRP with 'fastboot boot twrp.img' and do anything? (Replace 'twrp.img' with your TWRP image filename)
If not, try fastboot flashing back to stock, but it kind of sounds like your emmc (internal storage chip) might have take a dump. Very unusual, but not unheard of.
Click to expand...
Click to collapse
I used a restore-to-stock tool. It didn't actually restore me to stock. I have NO CLUE what it did, but suddenly i saw my custom boot animation again, and was able to boot into twrp, altough my nandroids are gone. I flashed a rom, and it didn't recognize the sim card. I flashed a new rom, and it recognizes the card, but i get no service (in my house where i always get service). Any ideas?
thebaconbox said:
I used a restore-to-stock tool. It didn't actually restore me to stock. I have NO CLUE what it did, but suddenly i saw my custom boot animation again, and was able to boot into twrp, altough my nandroids are gone. I flashed a rom, and it didn't recognize the sim card. I flashed a new rom, and it recognizes the card, but i get no service (in my house where i always get service). Any ideas?
Click to expand...
Click to collapse
This is why one-click tools are bad... You need to flash the full stock image manually, and not downgrade, you must use the same or newer version of stock firmware than you device last had installed.
acejavelin said:
This is why one-click tools are bad... You need to flash the full stock image manually, and not downgrade, you must use the same or newer version of stock firmware than you device last had installed.
Click to expand...
Click to collapse
How do I do that?
thebaconbox said:
How do I do that?
Click to expand...
Click to collapse
http://forum.xda-developers.com/mot...de-return-to-stock-relock-bootloader-t3489110
acejavelin said:
http://forum.xda-developers.com/mot...de-return-to-stock-relock-bootloader-t3489110
Click to expand...
Click to collapse
Could I just flash the NON-HLOS.bin modem in fastboot and nothing else?
thebaconbox said:
Could I just flash the NON-HLOS.bin modem in fastboot and nothing else?
Click to expand...
Click to collapse
No, I don't think so, but you could do it like this:
Code:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot flash bluetooth BTFM.bin (optional)
acejavelin said:
No, I don't think so, but you could do it like this:
Code:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot flash bluetooth BTFM.bin (optional)
Click to expand...
Click to collapse
And i can do this with twrp installed and the pure nexus custom rom installed and it should work just fine?
thebaconbox said:
And i can do this with twrp installed and the pure nexus custom rom installed and it should work just fine?
Click to expand...
Click to collapse
Yes
acejavelin said:
Yes
Click to expand...
Click to collapse
Alright, I flashed everything and my cell service now works flawlessly.
thebaconbox said:
Alright, I flashed everything and my cell service now works flawlessly.
Click to expand...
Click to collapse
Awesome!
hy,
my purenexus rom was running perfectly but today i was installing spotify and it hanged and then i had to retsart but now it stucks on bootloader warning screen .recvory also stucks on twrp logo . now what should i do .i googled and found this thread.please guide me which thread do i need to follow ..will my bootloader get locked again ? where do i have to start it from? i also have nandroid backup of previous custom rom which is truepure rom. please guide me.
Flash(with fastboot) again twrp(wipe system, cache, data, dalvik) and restore your backup. @azzammalik
dzidexx said:
Flash(with fastboot) again twrp(wipe system, cache, data, dalvik) and restore your backup. @azzammalik
Click to expand...
Click to collapse
if i flash twrp again then it would stuck again on twrp logo as this op suggested . by flashing through fastboot you meant stock firmware then can you please guide me which file i have to download so i can just flash it using fastboot. and is there any way so i dont loose my data thanks
azzammalik said:
if i flash twrp again then it would stuck again on twrp logo as this op suggested . by flashing through fastboot you meant stock firmware then can you please guide me which file i have to download so i can just flash it using fastboot. and is there any way so i dont loose my data thanks
Click to expand...
Click to collapse
Only with twrp you can save your data.
What version did you used? Try with another, maybe don't flash - only boot.
"fastboot boot NameOfTwrp.img"
If it boot copy your data to pc.
Stock you can flash with fastboot, here is "how to", download and flash the highest version for you model:
https://forum.xda-developers.com/mo...de-return-to-stock-relock-bootloader-t3489110
Read carefully, don't lock bootloader.
Since I lost everything from the boot to the recovery to the system part to anything, i haven't been able to boot the phone;
I can access erecovery but when I try to recover the phone it stops at downloading and then says couldn't connect to servers so that's dead;
I can access TWRP but when I try to flash MM, it returns errors saying that it couldn't mount partitions (Vendor, cust and other...)
I can access fastboot mode. Some people suggested that I should try recovering using dload but the transfert rate to the sd card is taking forever;
Now I extracted everything from update.app using huawei firmware extractor (see http://imgur.com/MWeCCXi ) what should I flash (via fastboot) and in what order?
I would really appreciate the help.
algnerd said:
Since I lost everything from the boot to the recovery to the system part to anything, i haven't been able to boot the phone;
I can access erecovery but when I try to recover the phone it stops at downloading and then says couldn't connect to servers so that's dead;
I can access TWRP but when I try to flash MM, it returns errors saying that it couldn't mount partitions (Vendor, cust and other...)
I can access fastboot mode. Some people suggested that I should try recovering using dload but the transfert rate to the sd card is taking forever;
Now I extracted everything from update.app using huawei firmware extractor (see http://imgur.com/MWeCCXi ) what should I flash (via fastboot) and in what order?
I would really appreciate the help.
Click to expand...
Click to collapse
Boot.img , recovery.img , cust.img , system.img.
Claleale said:
Boot.img , recovery.img , cust.img , system.img.
Click to expand...
Click to collapse
Are those the correct commands?
Fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash cust cust.img
fastboot flash system system.img
?
algnerd said:
Are those the correct commands?
Fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash cust cust.img
fastboot flash system system.img
?
Click to expand...
Click to collapse
Yes
Claleale said:
Yes
Click to expand...
Click to collapse
Flashing cust and system returned failes
For cust: (failed remote: partition error)
For syst: (failed remote: sparse flash write failure)
Since I was running nougat before messing up the phone, it had to be System and Boot extracted from the nougat update
By Nougat I assume you mean the file that has been digged out somewhere in the web and that is floating around here in the forums?
Well we all don't really know what this build exactly is, which makes it very hard to reconstruct your errors and give you advice... I would never flash that but okay, that's why we are here
Do you have a TWRP backup that you can restore (and if no, maybe somebody can upload you a clean TWRP restore file)?
Have you tried flashing CM / AICP?
Schlengge said:
By Nougat I assume you mean the file that has been digged out somewhere in the web and that is floating around here in the forums?
Well we all don't really know what this build exactly is, which makes it very hard to reconstruct your errors and give you advice...
Do you have a TWRP backup that you can restore (and if no, maybe somebody can upload you a clean TWRP restore file)?
Have you tried flashing CM?
Click to expand...
Click to collapse
Indeed, the same build that was floating in here.
I was able to resurect my phone from the dead by flashing boot, system and recovery from nougat build then I downgraded to MM untill a more stable release;
Thanks for your support anyway.
(If you know how to close this thread, you're more than welcome to do it )
algnerd said:
...
(If you know how to close this thread, you're more than welcome to do it )
Click to expand...
Click to collapse
You have to use the report button on your own OP. In the report text box, just ask mods to close your thread. The mod who is assigned to this forum will handle your request.
algnerd said:
Indeed, the same build that was floating in here.
I was able to resurect my phone from the dead by flashing boot, system and recovery from nougat build then I downgraded to MM untill a more stable release;
Thanks for your support anyway.
(If you know how to close this thread, you're more than welcome to do it )
Click to expand...
Click to collapse
Hi there. Earlier I spent a few painful hours in the same boat you were in. I've managed to get back to a fresh install of the Nougat build from this thread, but can't seem the downgrade to MM using the (translated from Spanish) instructions found here (linked from that first thread). How did you manage to get back to MM?
(I should add that I tried to flash boot, system and recovery via fastboot without any success).
Cheers
thomasedwardbullen1986 said:
Hi there. Earlier I spent a few painful hours in the same boat you were in. I've managed to get back to a fresh install of the Nougat build from this thread, but can't seem the downgrade to MM using the (translated from Spanish) instructions found here (linked from that first thread). How did you manage to get back to MM?
(I should add that I tried to flash boot, system and recovery via fastboot without any success).
Cheers
Click to expand...
Click to collapse
May god have mercy on your soul.
For the downgrade, I didn't use the b161 directly. I flashed some oeminfo provided in the same folder as the TWRP. Then used b150 ans the three boutons method. Worked like a charm.
Hope it will help you downgrade your phone.
I have the same problem, someone could explain it to me step by step, please
ask help
Hello
My name is EL HADJI MODOU SOW.I request your help concerning a big problem that I meet with my phone huawei P9 lite vns-l31c113b364 (these is the serial number 4TE0216B08004097) .in fact I wanted to activate the second sim then j I made a mistake handling the shot the system is corrupt and now I can not use my phone. I tried to flash it but I can not find a good frimeware. All the flash files that I find are working except the cust.img , vendor.img and product.img. what happens when I flash the cust.img (H: \ SRKToolHuawei-Lod-Chong-V2.0-20161002> fastboot flash cust CUST.img
target reported download size of 471859200 bytes
sending 'cust' (435462 KB) ...
OKAY [10.711s]
writing 'cust' ...
FAILED (remote: partition error)
finished. total time: 10.729s).
please help me I'm really teriified
this is my email:[email protected]
This appears. I can not find anything on the internet and I do not know what to do.
KafkaG said:
This appears. I can not find anything on the internet and I do not know what to do.
Click to expand...
Click to collapse
Hi,
extract the original Firmware on your PC, look for boot.img and than in fastboot write "fastboot flash boot boot.img". Error1 disapers. :good:
Sent from my Mi A1 using XDA Labs
yorkberliner said:
Hi,
extract the original Firmware on your PC, look for boot.img and than in fastboot write "fastboot flash boot boot.img". Error1 disapers. :good:
Click to expand...
Click to collapse
Thanks, but how I can do it?
yorkberliner said:
Hi,
extract the original Firmware on your PC, look for boot.img and than in fastboot write "fastboot flash boot boot.img". Error1 disapers. :good:
Click to expand...
Click to collapse
but I have to extract it from the firmware of lineageos I installed or from the original one of stock? and how do I extract it?
Nobody can help me?
KafkaG said:
Nobody can help me?
Click to expand...
Click to collapse
Good evening,
please be patient. DLoad and extract with 7zip the firmware from here. Extract the firmware again. Now you have the original boot.img from MIUI.
In Fastboot flash the boot.img with "fastboot flash boot boot.img".
If above method won't work, re-download the rom file, this seems corrupt.
Next time try to fresh flash the rom instead of ota, some ota are broken and would have some issue like this.
tanapak1 said:
If above method won't work, re-download the rom file, this seems corrupt.
Next time try to fresh flash the rom instead of ota, some ota are broken and would have some issue like this.
Click to expand...
Click to collapse
I downloaded several times the same rom and more versions, the problem is the system
yorkberliner said:
Good evening,
please be patient. DLoad and extract with 7zip the firmware from here. Extract the firmware again. Now you have the original boot.img from MIUI.
In Fastboot flash the boot.img with "fastboot flash boot boot.img".
Click to expand...
Click to collapse
which of those rom? the first one, 8.1 almost destroyed the system (with the boot.img) and I had to put the boot.img back from the twrp backup, so which link is right?
Edit: I think, indeed, I'm sure I need the boot.img of the rom that I have or lineage, but I do not know how to extract it from the zip.
Hi,
okay. I think the best way is you flash first the original Firmware from here with Xiaomi Flash Tool. DLoad and install on your PC. DLoad and read this Site.
Now you have the original Firmware installed. Go to settings, about the Phone, Buildnumber. Tab 7 times on it and than go to the Developer. Open OEM and US-Debugging. Reboot into Fastboot. In ADB/Fastboot write "fastboot devices" and your device must recogniced. Than write "fastboot oem unlock". After this you get a reboot to system. Now look again iin settings, devoloper if oem and usb-debugging on. Reboot in fastboot your Phone. Now write again "fastboot devices". Is everythink okay than write "fastboot boot recovery-3.2.1-2-oreo.img". Now you have twrp installed. In twrp flash the twrp-recoveryinstaller-3.2.1-2-oreo.zip. After this you can flash your favoryte Custom Rom. Good Luck :good:
yorkberliner said:
Hi,
okay. I think the best way is you flash first the original Firmware from here with Xiaomi Flash Tool. DLoad and install on your PC. DLoad and read this Site.
Now you have the original Firmware installed. Go to settings, about the Phone, Buildnumber. Tab 7 times on it and than go to the Developer. Open OEM and US-Debugging. Reboot into Fastboot. In ADB/Fastboot write "fastboot devices" and your device must recogniced. Than write "fastboot oem unlock". After this you get a reboot to system. Now look again iin settings, devoloper if oem and usb-debugging on. Reboot in fastboot your Phone. Now write again "fastboot devices". Is everythink okay than write "fastboot boot recovery-3.2.1-2-oreo.img". Now you have twrp installed. In twrp flash the twrp-recoveryinstaller-3.2.1-2-oreo.zip. After this you can flash your favoryte Custom Rom. Good Luck :good:
Click to expand...
Click to collapse
No thanks, bye
Hi so I been seeing many people getting stuck on fastboot after flashing ROM so here is the method u can use if u can't boot to TWRP also.
I have tired on PA ROM and it works so idk about others ROMs ..
fastboot flash dtbo dtbo.img
fastboot flash logo logo.img
fastboot flash vbmeta vbmeta.img
fastboot flash boot boot.img
fastboot flash misc misc.img (u can get on fastboot rom not .zip)
fastboot flash recovery recovery.img (recommend used twrp-3.3.1-2-davinci-fix).. Russian one
And after those comands do run TWRP auto installer.
U can find those files from fastboot stock ROM. This will save ur data and u won't needed to flash Stock ROM ..
Hope I explained everything if anything else needed comment down below.
Hi, i'm stuck in this fastboot limbo but can't find some of these files you mentioned: logo.img and misc.img
Where do i get them?
edit: nevermind, solved flashing fastboot miui with miflash pro.
EDIT 2: after flashing a rom i get stuck in fastboot everytime. How to avoid this?
Also tried flashing those files in that exact sequence but still stuck in fastboot.
My persist.img is shown not writable in cmd if I try to flash it. If I flash a rom using TWRP an error pops up saying "failed to mount /persist' (Invalid Argument).
SOLVED- Flashing persist.img from twrp "Install Image" works.
farhan20 said:
Hi so I been seeing many people getting stuck on fastboot after flashing ROM so here is the method u can use if u can't boot to TWRP also.
I have tired on PA ROM and it works so idk about others ROMs ..
fastboot flash dtbo dtbo.img
fastboot flash logo logo.img
fastboot flash vbmeta vbmeta.img
fastboot flash boot boot.img
fastboot flash misc misc.img (u can get on fastboot rom not .zip)
fastboot flash recovery recovery.img (recommend used twrp-3.3.1-2-davinci-fix).. Russian one
And after those comands do run TWRP auto installer.
U can find those files from fastboot stock ROM. This will save ur data and u won't needed to flash Stock ROM ..
Hope I explained everything if anything else needed comment down below.
Click to expand...
Click to collapse
Could you (or anyone) please provide these files.
Reep1324 said:
Could you (or anyone) please provide these files.
Click to expand...
Click to collapse
Hi, this u can get from fastboot stock Rom, download fastboot stock Rom and extract them u will find.. if need help just tag me ..
farhan20 said:
Hi, this u can get from fastboot stock Rom, download fastboot stock Rom and extract them u will find.. if need help just tag me ..
Click to expand...
Click to collapse
i got the .img file but i cant install it via twrp or fastboot cause this partition is unmountable
do you have any idea? i flashed stock rom via fastboot but the error insists
Dr.Dinel said:
i got the .img file but i cant install it via twrp or fastboot cause this partition is unmountable
do you have any idea? i flashed stock rom via fastboot but the error insists
Click to expand...
Click to collapse
Hello, seems u need to repair ur partition from TWRP.
Also what u did that cause this ?
PS: I'm not expert or anything but I will try to help if I could.
farhan20 said:
Hello, seems u need to repair ur partition from TWRP.
Also what u did that cause this ?
PS: I'm not expert or anything but I will try to help if I could.
Click to expand...
Click to collapse
thanks for replying
i finally solved it, used a chinese twrp that has the option to install on persist partition and the rest was easy
My k20 bricked after install miui 11 Chine version i try to flashing with flash tool but after processing not working "error antirolback check error" please someone help me
hamidezat20 said:
My k20 bricked after install miui 11 Chine version i try to flashing with flash tool but after processing not working "error antirolback check error" please someone help me
Click to expand...
Click to collapse
Hi, please follow this setups and it should be fine .
If you run into errors flashing fastboot images to your device, edit the .bat files that came with it. Usually you want to edit "flash_all.bat"
For "Missmatching image and device":
Remove the lines highlighted in the screenshot from the file, save and try flashing it again.
For Antirollback Error:
Remove ALL lines ABOVE the highlighted lines in the screenshot from the file, save and try flashing it again.
Always make sure that you got the right image for your device. Removing check lines from these files can permanently brick your device if you use the wrong fastboot image.
farhan20 said:
Hi, please follow this setups and it should be fine .
If you run into errors flashing fastboot images to your device, edit the .bat files that came with it. Usually you want to edit "flash_all.bat"
For "Missmatching image and device":
Remove the lines highlighted in the screenshot from the file, save and try flashing it again.
For Antirollback Error:
Remove ALL lines ABOVE the highlighted lines in the screenshot from the file, save and try flashing it again.
Always make sure that you got the right image for your device. Removing check lines from these files can permanently brick your device if you use the wrong fastboot image.
Click to expand...
Click to collapse
like me please help me after installing miui 11 Chine version
hamidezat20 said:
like me please help me after installing miui 11 Chine version
Click to expand...
Click to collapse
U r stuck on fastboot right and u said u can't flash fastboot rom because u r getting anti roll back error so I gave u solution
How to fix this problem
Hello same me how to fixed step by step
First you need fastboot rom extract fastboot rom on your pc after extract find 3 file
1-boot
2-recovery
3-system
Flash with fastboot
Turn off your phone and going to fastboot
Type
Fastboot devices
Fastboot flash boot boot.img
Fastboot flash recovery recovery.img
Fastboot flash system system.img
Done device can't boot but you can install twrp China version link ?
https://www.lanzous.com/i6ahykh
after installation you can go to twrp
Download fastboot miui install from twrp
Sorry for me English
Oh my god, you saved me!
HI guys i flashed my mi 9t with twrp-3.3.1-2-davinci-fix it worked with miui.eu 9.8.15 after trying to flash miui 11 for about 6 hrs lol, anyway my phone is working but i would like to go back to stock and relock the bootloader but i cant find the mi 9t fastboot rom
timbook2 said:
HI guys i flashed my mi 9t with twrp-3.3.1-2-davinci-fix it worked with miui.eu 9.8.15 after trying to flash miui 11 for about 6 hrs lol, anyway my phone is working but i would like to go back to stock and relock the bootloader but i cant find the mi 9t fastboot rom
Click to expand...
Click to collapse
You're able to flash miui 11 after such long time or just 9.8.15?
farhan20 said:
Hi, please follow this setups and it should be fine .
If you run into errors flashing fastboot images to your device, edit the .bat files that came with it. Usually you want to edit "flash_all.bat"
For "Missmatching image and device":
Remove the lines highlighted in the screenshot from the file, save and try flashing it again.
For Antirollback Error:
Remove ALL lines ABOVE the highlighted lines in the screenshot from the file, save and try flashing it again.
Always make sure that you got the right image for your device. Removing check lines from these files can permanently brick your device if you use the wrong fastboot image.
Click to expand...
Click to collapse
hey i am getting file missmatching image and device error so i deleted those lines from .bat file but still getting the same error
lucifer said:
hey i am getting file missmatching image and device error so i deleted those lines from .bat file but still getting the same error
Click to expand...
Click to collapse
Hi, u deleted from flash all. Bat right and what's the error u r getting?
farhan20 said:
Hi, u deleted from flash all. Bat right and what's the error u r getting?
Click to expand...
Click to collapse
well it worked after i moved the file to c:/ drive but after flashing i lost widewine L1
When I got 9.8.15 working I stopped at least I got a working phone now, I will try and flash stock later.
I got anti rollback error trying to flash stock with miflash tool.