Hi guys,
i'm stucking in a not good situation with my OnePlus 2. Maybe someone here can help me..
In this moment i have my phone without access to recovery, but working fastboot.
That problem happened after flashing the Phoenix Rom. I have the bootloader locked, from fastboot i can't do anything. ( flash recovery, flash boot.img etc). No rom working, i can't enabling the possibility to unlock the bootloader..
I already tried with the Hard Brick tricks, but my laptop did not recognize the Qualcomm devices.
somebody can help me?
i will offer you a beer
Thanks!
colol said:
Hi guys,
i'm stucking in a not good situation with my OnePlus 2. Maybe someone here can help me..
In this moment i have my phone without access to recovery, but working fastboot.
That problem happened after flashing the Phoenix Rom. I have the bootloader locked, from fastboot i can't do anything. ( flash recovery, flash boot.img etc). No rom working, i can't enabling the possibility to unlock the bootloader..
I already tried with the Hard Brick tricks, but my laptop did not recognize the Qualcomm devices.
somebody can help me?
i will offer you a beer
Thanks!
Click to expand...
Click to collapse
How did you managed to flash the ROM since your bootloader is locked, which means no custom recovery installed ?
Does
Code:
fastboot boot recovery.img
works ? (BOOT, not FLASH)
casual_kikoo said:
How did you managed to flash the ROM since your bootloader is locked, which means no custom recovery installed ?
Does
Code:
fastboot boot recovery.img
works ? (BOOT, not FLASH)
Click to expand...
Click to collapse
Hi casual_kikoo,
thanks for reply!
I tried to do fastboot boot recovery.img, but not worked. No customer recovery.
I fixed it, following this guide. ( after a lot of windows's driver problems )
http://forum.xda-developers.com/oneplus-2/general/guide-official-stock-reset-to-oos-2-2-0-t3290707
Thanks so much for the help!
Cheers,
Ok I messed up pretty bad this time.
I used my Moto X Pure 2015 for a couple months. Unlocked bootloader, rooted it and used a couple diff ROMs. My father liked the phone, so wanted to give it to him after restoring it to stock, meaning unroot, lock bootloader, restore to factory ROM. But somewhere along the way I messed up and dont know how. I may have tried to flash 5.1.1 when my phone was already updated OTA to 6.0 but I am not sure.
Now I am stuck in a bootloop. The Moto Android logo comes up and it keeps looping there. I can enter bootloader but cannot enter recovery. It goes back to the loop when I attempt to go to recovery mode. I tried flashing (with the Flash-All.bat) packages lying out there, but my device isnt recognized. It says device not found. I cant even restart bootloader through the adb command. I type adb devices in cmd and it says ADB devices attached, but I dont see my device displayed. But Device Manager lists my phone as Motorola ADB Device.
I took a chance and sent it to Motorola......................... surprise surprise...../s , they refused to fix it coz of the unlocked bootloader(even with a fee).
So, now I cant flash anything, I cant go to recovery, nor can get the phone to boot up.
Have I lost the device completely? I dont have any nandroid backups either.
Any help is greatly appreciated.
Ok. I made some progress. I Uninstalled my device drivers, reinstalled from the Motorola website. I am able to flash things from fastboot.
I did the following for MM6.0
adb reboot-bootloader
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot flash bluetooth BTFM.bin
fastboot erase cache
fastboot erase userdata
fastboot reboot
Everything was successful.
Now I can boot into the OS.
But now my WIFI isnt working. I go to settings and try to turn it on, but it doesnt.
Can someone help me here>?
nikhilnagaraj24 said:
Ok. I made some progress. I Uninstalled my device drivers, reinstalled from the Motorola website. I am able to flash things from fastboot.
I did the following for MM6.0
adb reboot-bootloader
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot flash bluetooth BTFM.bin
fastboot erase cache
fastboot erase userdata
fastboot reboot
Everything was successful.
Now I can boot into the OS.
But now my WIFI isnt working. I go to settings and try to turn it on, but it doesnt.
Can someone help me here>?
Click to expand...
Click to collapse
are you sure you flashed everything correctly?
I don't know directions or anything, but I can tell you from other posts on the moto x pure forum that your not the first to lose wifi after restoring stock. To my knowledge you need to down grade to the original factory Android version, not just 5.1 or whatever, it HAS to be the original Android version, AND original baseband and system version, then upgrade from there. Hour that helps a bit, but do some searching and I'm sure you will find what I mean.
Thanks for your reply guys. I eventually fixed it. I now am running the TruPure ROM and everything seems to be working fine.
Except the the MicroSD card that I had 'adopted' is now write protected. I am not finding any luck trying to salvage that. I dont care about my data on it, just want it to be usable. I read somewhere that the card, once adopted, will only work on that ROM that it was originally adopted on. I even tried flashing the other ROM (OrionOS) but no go. My phone doesnt recognize the card except in Recovery. Computer recognizes it but I cant do anything since it is write protected. I tried DISKPART, the regedit fix and a bunch of other stuff. Didnt help. Its a brand new card, so I dont believe the card has gone faulty. Any idea on how to fix it?
nikhilnagaraj24 said:
Thanks for your reply guys. I eventually fixed it. I now am running the TruPure ROM and everything seems to be working fine.
Except the the MicroSD card that I had 'adopted' is now write protected. I am not finding any luck trying to salvage that. I dont care about my data on it, just want it to be usable. I read somewhere that the card, once adopted, will only work on that ROM that it was originally adopted on. I even tried flashing the other ROM (OrionOS) but no go. My phone doesnt recognize the card except in Recovery. Computer recognizes it but I cant do anything since it is write protected. I tried DISKPART, the regedit fix and a bunch of other stuff. Didnt help. Its a brand new card, so I dont believe the card has gone faulty. Any idea on how to fix it?
Click to expand...
Click to collapse
if you had an sd card to pc adapter so you can format it from the pc?_?
Well I downloaded a tool and unlocked phone flashed twrp then rebooted and it was back to stock, im not sure what happened now phone won't boot It will only go to factory recovery it says one unlock not allowed now and adv is disabled is my phone a Brick? It doesn't let me flash anything or get into adb can I do anything in fastboot?? Help please I have us version I was using all in one tool is there a way to fix this?
Tried?
https://forum.xda-developers.com/le-pro3/help/brick-t3609704
Fixed
I just did this and it works
Now it's unlocked and booting to lineage
SOLVED: This saved my phone:
fastboot flash xbl xbl.elf
fastboot flash aboot emmc_appsboot.mbn
https://forum.xda-developers.com/showpost.php?p=72553639&postcount=37
Just an FYI type thing that may save people a bit of digging around sometime.
I tried to get the update that just came out, but as i had TWRP as recovery, no good. Anyhow, in my trying i completely bollixed the phone. Would start, but always booted to TWRP and had various conniptions. Could not even get a TWRP backup to load. Strange not encountered before by me stuff............
Anyhow, recovered by the following method to stock and am back in business.
Boot into bootloader fastboot mode.
Extract .xml.zip format firmware file:
eg: CEDRIC_NPP25.137-15_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
to a folder on c drive of the PC that has the ADB and fastboot files in it.
In command prompt cd\ to that directory.
fastboot flash the following in sequence.
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk1
fastboot flash system system.img_sparsechunk2
fastboot flash system system.img_sparsechunk3
fastboot flash system system.img_sparsechunk4
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot reboot
boots to stock .
Not my own work, adapted from this thread by t-bon3
https://forum.xda-developers.com/showthread.php?t=2542219
which I found thanks to eens post18 at this thread
https://forum.xda-developers.com/g5/how-to/npp25-137-33-stock-firmware-moto-g5-t3577084/page2
After this, Motorola system update installed. On Australian XT1676 is build number NPP25.137-15-7
Patch level 1-May-2017
Still get the I cant be trusted page on power up as have unlocked bootloader.
Many thanks to all at XDA, its a resource that can certainly get you into trouble, but then out of it again.
where do you get the stock firmware?
Think I worked out what I did wrong. Somehow, I changed the format of the data partition. Fat fingers at some point??
TWRP backups didn’t like that and would not mount or write to the data partition as it was not f2fs format that the backup had been made in??
Anyway, restored data from a TWRP backup after going to ....wipe…format data. All good.
That gave me the passcode lockout issue at next reboot which can deal with.
stock Firmware? http://www.filefactory.com/folder/c6cdedc45a775d27/?sort=created&order=DESC&show=25
for me stock the phone came with is: CEDRIC_NPP25.137-15_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Worked on my XT1676 dual sim, but CHECK if its appropriate for your model. There are files on that page that wont be and flashing some of their components (particularly bootloader), can i have read, be unrecoverable disastrous. Be warned.
Slow, but got it. At first i thought it was corrupt as TWRP wouldn't flash it. My gumby. The .xml.zips apparently need to be extracted and flashed file by file.
We're you able to revert to a locked bootloader after this, I am looking forward to do so
We're you able to revert to a locked bootloader after this, I am looking forward to do so
Click to expand...
Click to collapse
didnt try, didnt need to for taking take the update.
And, from my reading there is no way so far to relock the bootloader. I got it to stock, with stock recovery, and that was enough for me.
astmacca said:
didnt try, didnt need to for taking take the update.
And, from my reading there is no way so far to relock the bootloader. I got it to stock, with stock recovery, and that was enough for me.
Click to expand...
Click to collapse
I can confirm what you said, but I am asking because I am sick of the warning before the device starts
ap4ss3rby said:
I can confirm what you said, but I am asking because I am sick of the warning before the device starts
Click to expand...
Click to collapse
You can get rid of that easily
Put phone in fastboot mode
Download logo from link below
Enter the following in a windows command prompt where you have fastboot files & the logo file
Code:
fastboot.exe flash logo logo-g5-fix.bin
http://drive.google.com/file/d/0B-idWfPYugGvREJaR3B0UFIxUkU/view?usp=sharing
TheFixItMan said:
You can get rid of that easily
Put phone in fastboot mode
Download logo from link below
Enter the following in a windows command prompt where you have fastboot files & the logo file
Code:
fastboot.exe flash logo logo-g5-fix.bin
http://drive.google.com/file/d/0B-idWfPYugGvREJaR3B0UFIxUkU/view?usp=sharing
Click to expand...
Click to collapse
Thanks, but this is why I made a Google pixel themed logo.bin and used a matching boot animation to go with it some time earlier
downgrade
thanks for the guide
- can i use this method to downgrade to this version?
- can i do this without unlocking the bootloader
- if it goes wrong can i unlock the bootloader later (i have an unlock code)
- is there a reason why we don't flash sparsechunk.0 ?
thanks in advance
distclean said:
thanks for the guide
- can i use this method to downgrade to this version?
- can i do this without unlocking the bootloader
- if it goes wrong can i unlock the bootloader later (i have an unlock code)
- is there a reason why we don't flash sparsechunk.0 ?
thanks in advance
Click to expand...
Click to collapse
No you cannot downgrade (same firmware version or newer required)
Yes - unlocked bootloader not required
As long as your phone still goes into the bootloader
You should flash all sparsechunks in number order
Thanks a bunch,
So to be absolutely clear, my phone shipped with NPP25.137-15-7 i can't install the stock rom linked, and the same version isn't out yet,
if i unlock the bootloader, would i be able to downgrade ?
Is the software channel setting preserved across this method?
distclean said:
Thanks a bunch,
So to be absolutely clear, my phone shipped with NPP25.137-15-7 i can't install the stock rom linked, and the same version isn't out yet,
if i unlock the bootloader, would i be able to downgrade ?
Is the software channel setting preserved across this method?
Click to expand...
Click to collapse
You maybe able to - there are different variants of the same phone
As long as the firmware is the same or newer (as in the bootloader and API version) it may flash
It will either flash or error out
There's only one way to find out - if your phone is dead anyway it's not going to make alot of difference
No - generally you can never downgrade firmware - doing so would be dangerous and you may loose the bootloader for good
thanks again,
motoboot.img is the bootloader you talk about? is the partition layout described somewhere? would custom roms use a different one here?
do tell me by the way if i should get this information elsewhere/if i should read something to get started in the whole moto g world.
distclean said:
thanks again,
motoboot.img is the bootloader you talk about? is the partition layout described somewhere? would custom roms use a different one here?
do tell me by the way if i should get this information elsewhere/if i should read something to get started in the whole moto g world.
Click to expand...
Click to collapse
You can write in adb
Code:
adb shell
cat /proc
cat /proc/partitions
Hello,
Does anyone know where can I download the latest firmware for Moto G5 XT1676 baseband Version: m8937_ 8000.122.02.40 R
Thanks
astmacca said:
Boot into bootloader fastboot mode.
Extract .xml.zip format firmware file:
eg: CEDRIC_NPP25.137-15_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
to a folder on c drive of the PC that has the ADB and fastboot files in it.
In command prompt cd\ to that directory.
fastboot flash the following in sequence.
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk1
fastboot flash system system.img_sparsechunk2
fastboot flash system system.img_sparsechunk3
fastboot flash system system.img_sparsechunk4
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot reboot
boots to stock .
Click to expand...
Click to collapse
You're partially right. These commands won't work for our files. You have to flash the firmware according to the instructions contained within the "flashfile.xml" file within the archive. For example we have no "motoboot" partition
I've flashed every stock package available now (4 I think) and haven't been offered an update once. I've ran a couple of custom ROMs but they're just not right in one way or another. Might be time to move on.
distclean said:
Thanks a bunch,
So to be absolutely clear, my phone shipped with NPP25.137-15-7 i can't install the stock rom linked, and the same version isn't out yet,
if i unlock the bootloader, would i be able to downgrade ?
Is the software channel setting preserved across this method?
Click to expand...
Click to collapse
I upgraded to this and since then can't downgrade the phone to the stock roms available online. From memory trying to flash gpt.bin gave a "Security version downgrade" error. So I wouldn't assume you'll be able to downgrade and until there is a copy of this particular firmware, you won't be able to flash back or relock the bootloader
astmacca said:
Think I worked out what I did wrong. Somehow, I changed the format of the data partition. Fat fingers at some point??
TWRP backups didn’t like that and would not mount or write to the data partition as it was not f2fs format that the backup had been made in??
Anyway, restored data from a TWRP backup after going to ....wipe…format data. All good.
That gave me the passcode lockout issue at next reboot which can deal with.
stock Firmware? http://www.filefactory.com/folder/c6cdedc45a775d27/?sort=created&order=DESC&show=25
for me stock the phone came with is: CEDRIC_NPP25.137-15_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Worked on my XT1676 dual sim, but CHECK if its appropriate for your model. There are files on that page that wont be and flashing some of their components (particularly bootloader), can i have read, be unrecoverable disastrous. Be warned.
Slow, but got it. At first i thought it was corrupt as TWRP wouldn't flash it. My gumby. The .xml.zips apparently need to be extracted and flashed file by file.
Click to expand...
Click to collapse
Is this ROM is good to my XT1676 Baseband: M8937_11.16.02.51R ?
astmacca said:
Think I worked out what I did wrong. Somehow, I changed the format of the data partition. Fat fingers at some point??
TWRP backups didn’t like that and would not mount or write to the data partition as it was not f2fs format that the backup had been made in??
Anyway, restored data from a TWRP backup after going to ....wipe…format data. All good.
That gave me the passcode lockout issue at next reboot which can deal with.
stock Firmware? http://www.filefactory.com/folder/c6cdedc45a775d27/?sort=created&order=DESC&show=25
for me stock the phone came with is: CEDRIC_NPP25.137-15_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Worked on my XT1676 dual sim, but CHECK if its appropriate for your model. There are files on that page that wont be and flashing some of their components (particularly bootloader), can i have read, be unrecoverable disastrous. Be warned.
Slow, but got it. At first i thought it was corrupt as TWRP wouldn't flash it. My gumby. The .xml.zips apparently need to be extracted and flashed file by file.
Click to expand...
Click to collapse
Hi, i own the same model of moto g5, i do this in fastboot window
fastboot erase userdata
now the phone only boot in twrp and show a message "failed to mount /data". i think that delete my userdata partition, how could i fix it?
once i can avoid this loop in twrp, i follow these steps to flash stock rom
thanks in advance
juan
hello there
i have a G2 in my hand, this phone bring to me in bootloop condition ( qualcomm mode), i fix the phone using TP method gone into fastboot mode, i erased and flash boot aboot recovery and LAF using fastboot commands, download mode OK now, after that tried to write stock firmware on phone but im not able to do that, seems the LAF file that i have written on phone was not correct one, i have tried lg flash tool and z3x lgtool, both stuck at the start of writing firmware procedure.
does anyone have any idea how to erase LAF file in current condition?
i cant access fastboot mode anymore and phone hanging on logo, so need a way to boot phone in fastboot mode or a way to erase LAF file from phone in download mode.
thanks in advance and best regards
any body?
any solution?