Hi guys well I had a telcel i337m but now im with a i337 from the u.s. and im wondering what could happen if try to install a telcel i337m rom official one?? And if I install a modem from telcel the same the mdl one or it doesn't matter? What are real differences between i337 and i337m? Thanks
Enviado desde mi SGH-I337 usando Tapatalk 2
bighleo114312 said:
Hi guys well I had a telcel i337m but now im with a i337 from the u.s. and im wondering what could happen if try to install a telcel i337m rom official one?? And if I install a modem from telcel the same the mdl one or it doesn't matter? What are real differences between i337 and i337m? Thanks
Enviado desde mi SGH-I337 usando Tapatalk 2
Click to expand...
Click to collapse
if your AT&T is on MF3 baseband you will not be able to change the rom or flash anything.. in case you brick it, in Mexico would be very hard to find someone to flash it again. But why you want to load a crappy telcel rom ? Just unlock the phone and use the telcel sim. I really don't get it why you want a telcel rom, those roms are the worst.
Hi thanks!! Well I was lucky I got with the mdl firmware and yes it 7nlock tonuse on iusacell. They say tjis provider has real 4g not like telcel but im not sure. Cause on telcel using h+ im gettimg the 4g sign on my s4
Enviado desde mi SGH-I337 usando Tapatalk 2
Well I don't understand you exactly what you mean by tjis provider... If you are talking about getting LTE.. then that is something different and is not available on all regions yet..
BTW: Check your PM's
I think you're concerned about the icons and whether or not they are showing the correct data speed you are on?? You mentioned that you're seeing the stock AT&T 4G icon instead of the Android H+ icon, well if you see just the 4G and not the 4G LTE then you are on H+.
If in case you do want to have the stock Android data icons then you just have to edit your build.prop to the jtflexx model. That way you can tell if your phone's network is getting the data speed you are expecting. You can also try an international ROM also. I use GoldenEye. Im currently in China for the month and the China Mobile APN set automatically and my icons are stock. Plenty of tweaking you can do.
Si necesitas ayuda en espanol mandame un PM.
Ojala que todo sale bien.
Jedimyndtryx. Thanks so 4g is only h+ and when I get lte here in my state will it show 4g lte ok thanks men. Y ya estas bro.
Enviado desde mi SGH-I337 usando Tapatalk
hello. im from venezuela and my operator is Movistar Venezuela and there operate bands are: <(2G)GSM: 850Mhz>. <(3G)WCDMA: 1900Mhz>. <(4G)LTE: Band 4 1700/2100 Mhz>. if i check redmi 3s on ethernet the information varies a lot... one says is compatible and others says its not... so people you have the phone can you please tell me if the phone works in this networks? please.
JavierG123 said:
hello. im from venezuela and my operator is Movistar Venezuela and there operate bands are: <(2G)GSM: 850Mhz>. <(3G)WCDMA: 1900Mhz>. <(4G)LTE: Band 4 1700/2100 Mhz>. if i check redmi 3s on ethernet the information varies a lot... one says is compatible and others says its not... so people you have the phone can you please tell me if the phone works in this networks? please.
Click to expand...
Click to collapse
soy de argentina, pudiste solucionar eso? estoy buscando lo mismo
endelgado10 said:
soy de argentina, pudiste solucionar eso? estoy buscando lo mismo
Click to expand...
Click to collapse
i reply in english because for forum rules the answer can be erase for be in other language lol. yes i can... i search a lot and i buy mine on amazon, i asked to the seller and he said it works on all except 4G band. anyway in my area don't have 4g so.. no problem with that if you want to buy on Chinese page you can enter here http://www.kimovil.com/es/donde-comprar-xiaomi-redmi-3s-3gb-32-gb and you can se the web sites where the phone its sold with that band enabled. i hope you understand my bad english xD
I am from Mexico and bought my phone at geekbuying webpage.
[HK Stock][Official International Version][Package B]XIAOMI Redmi 3S 5.0inch HD 4G LTE MIUI 7 Qualcomm Snapdragon 430 Octa Core 3GB 32GB Smartphone
This International Version Works perfectly with 4G LTE Band 4. (Telcel Mexico)
Movistar in Mexico Uses the LTE Band 2 and the phone will only work with 3g. (H+)
Hope this helps.
Seems like the international version of Redmi 3s has additional FDD LTE bands (4G: FDD LTE B1/3/4/5/7/8/20 (2100/1800/1700/850/2600/900/800MHz)). I am wondering if we can unlock the additional bands in our Redmi 3s Chinese version because I also need band 4 in order to have LTE signal.
I was trying to unlock Band 2 on my phone, but could not unlock the bootloader.
After being granted permission from Xiaomi to unlock bootloader, I get the "Couldn't Verify Device" Error at 50%. Seems this is something xiaomi needs to fix.
How to enable 4g on sim 2?
cm14.1 by mshoaib7
I think you cant because it sa hardware thing.I read it somewhere i have a si gle sim version
JovanSijacki said:
I think you cant because it sa hardware thing.I read it somewhere i have a si gle sim version
Click to expand...
Click to collapse
But on ROM Cm13/Omni ROM 7.1 i Can switch 4G to sim 2
Then sorry for giving you the incorrect information.You ca try dialing *#*#4636#*#* then network options or something like that and that will give you a network meni and maybe an option to enable 4g
Hello guys, I just got the global version of this phone a few days ago, also I have updated to Oreo (Jan 1st update). I can't get 4G network connection with a service provider called Movistar and/or Virginmobile (they are using the band 2), but with AT&T (band 4) the LTE signal is working. Seems like this phone is working only with two service providers here in Mexico, Telcel and AT&T only. Do you know if there is a way to make this phone really useful with all the service providers? Thanks!
*Note: Unefon (using AT&T network) and FreedoomPop (using Telcel network) are providing LTE service too.
gplsource said:
Hello guys, I just got the global version of this phone a few days ago, also I have updated to Oreo (Jan 1st update). I can't get 4G network connection with a service provider called Movistar and/or Virginmobile (they are using the band 2), but with AT&T (band 4) the LTE signal is working. Seems like this phone is working only with two service providers here in Mexico, Telcel and AT&T only. Do you know if there is a way to make this phone really useful with all the service providers? Thanks!
*Note: Unefon (using AT&T network) and FreedoomPop (using Telcel network) are providing LTE service too.
Click to expand...
Click to collapse
Aparentemente lo que dicen en los foros de MIUI es que el telefono no soporta la banda 2 y es por eso que los que tenemos movistar tristemente no podremos usar el LTE
Bro,Xiaomi currently only support the AWS band,not the PCS band
So a quick one here, I have the SM-G975U1 Unlocked Galaxy S10+, and I flashed it to the SM-G975U TMB firmware. So far its ok - the t-mo advanced messaging and voice calling works, but it does say the "your current software version isn't supported. Visit a service center". I did some searching, and I saw there is a SM-G975U1 TMB version as well.
I am a bit confused by this - I thought all unlocked firmware was U1, and carrier branded firmware is U. Has anyone flashed this U1 TMB and got all the carrier features? What is this version?
And a side note, is there no difference between flashing U or U1 firmware between phones, or is it better practice to flash the U1 firmware on U1 devices?
Thanks!
There is no difference in hardware. U1 will lose some of the tmobile stuff for sure. I have U1 and there is no VoLTE so far. I tried to get virtual vm to work and there is no way. There is no U1 TMB, it's just SIM provisioning. if you want tmobile stuff, you can go ahead and flash their firmware. where do you get this error you mentioned? "your current software version isn't supported. Visit a service center"
NICEGYPT said:
There is no difference in hardware. U1 will lose some of the tmobile stuff for sure. I have U1 and there is no VoLTE so far. I tried to get virtual vm to work and there is no way. There is no U1 TMB, it's just SIM provisioning. if you want tmobile stuff, you can go ahead and flash their firmware. where do you get this error you mentioned? "your current software version isn't supported. Visit a service center"
Click to expand...
Click to collapse
Volte works outta the box for u1 on tmobile, you won't find an option but it is working, you can check by making a call and it'll be on lte if you have volte, and visual voicemail you can't get integrated into dialer but you can use the stand alone app, only difference is the TMobile bloat bewtween the firmwares and the u1 has the native scam caller
Shuthefrontdoor said:
Volte works outta the box for u1 on tmobile, you won't find an option but it is working, you can check by making a call and it'll be on lte if you have volte, and visual voicemail you can't get integrated into dialer but you can use the stand alone app, only difference is the TMobile bloat bewtween the firmwares and the u1 has the native scam caller
Click to expand...
Click to collapse
So, do you get the HD icon next to the caller's name? I have tried to native visual vm didn't work... Did you get yours to work? if so, what is your app version?
NICEGYPT said:
So, do you get the HD icon next to the caller's name? I have tried to native visual vm didn't work... Did you get yours to work? if so, what is your app version?
Click to expand...
Click to collapse
You won't get the hd icon because that's a tmo firmware thing, doesn't mean volte isn't working, if your lte icon doesnt go away during a call you have volte, as for the VM app just download from playstore
^this! Good call!
U1 supports VoWifi and VoLTE. No VVM nor Video Calling. The VoLTE indicator is missing, yes, but U1 models have supported it on TMO since S8. RCS is likely not supported by the stock Messenger app.
Unlike the TMO var, U1 has Hiya built in. And of course there's no SIM unlock code.
NICEGYPT said:
There is no difference in hardware. U1 will lose some of the tmobile stuff for sure. I have U1 and there is no VoLTE so far. I tried to get virtual vm to work and there is no way. There is no U1 TMB, it's just SIM provisioning. if you want tmobile stuff, you can go ahead and flash their firmware. where do you get this error you mentioned? "your current software version isn't supported. Visit a service center"
Click to expand...
Click to collapse
I got this when I went to conduct a software update.
However I guess no one has any insight on the original question regarding if there is an actual TMB U1 firmware as indicated on SamFirm?
Question for anyone who wants to answer. I have a SM-977U Verizon S10 5G Model. If I flash it using Oden to firmware version SM-975U1 will it affect the network performance and speed of the phone? Has anyone Don this yet?
NICEGYPT said:
There is no difference in hardware. U1 will lose some of the tmobile stuff for sure. I have U1 and there is no VoLTE so far. I tried to get virtual vm to work and there is no way. There is no U1 TMB, it's just SIM provisioning. if you want tmobile stuff, you can go ahead and flash their firmware. where do you get this error you mentioned? "your current software version isn't supported. Visit a service center"
Click to expand...
Click to collapse
did you have camera night mode in U1 firmware?
hnguyen1982 said:
did you have camera night mode in U1 firmware?
Click to expand...
Click to collapse
No, I flashed tmobile firmware a long time ago for better signal.
is it possible to flash tmobile rom on a verizon s10 plus
NICEGYPT said:
No, I flashed tmobile firmware a long time ago for better signal.
Click to expand...
Click to collapse
Are you sure you actually get better signal, or is it just visual adjustments which Carriers have been known to do?
https://wccftech.com/android-p-will-let-carriers-tweak-how-signal-bars-are-shown/
And if it is signal, is it possible to flash U1 with the t-mobile modem?
So can we flash tmobile rom on Verizon s10+ been out of the game so long
Joecascio2000 said:
Are you sure you actually get better signal, or is it just visual adjustments which Carriers have been known to do?
https://wccftech.com/android-p-will-let-carriers-tweak-how-signal-bars-are-shown/
And if it is signal, is it possible to flash U1 with the t-mobile modem?
Click to expand...
Click to collapse
The signal definitely improved a lot. With U1 I use to have one bar or no signal inside my office at work. Now, I have about 3 bars inside my office. In regard to mixing firmware, I believe it's not possible
so the U1 is on June update with Night mode available? or is it still on May?
Tengo un galaxy s10 + de sprint (SM-G975U) LIBERADO POR LA COMPAÑÍA. La cosa es que donde vivo no me levanta bien la señal de mi telefonía actual (at&t) La capa de personalización de sprint no me deja buena conectividad de señal
Vi en la internet que la version SM-G975U de celular ES LA MISMA PARA CUALQUIER COMPAÑIA
Mi pregunta es:
¿Si flasheo el sistema y pongo SO el de la empresa T- mobile creen que pueda solucionar mi problema con la señal y red de datos?
iOS&Droid718 said:
Question for anyone who wants to answer. I have a SM-975U Verizon S10 5G Model. If I flash it using Oden to firmware version SM-975U1 will it affect the network performance and speed of the phone? Has anyone Don this yet?
Click to expand...
Click to collapse
I have the query as well. Did anyone tried?
I really need help on this I do have the SM-G975U1 running on version 11 can I install the SM-G975U version 12 on it
Chinedu12 said:
Eu realmente preciso de ajuda nisso eu tenho o SM-G975U1 rodando na versão 11 posso instalar o SM-G975U versão 12 nele
Click to expand...
Click to collapse
Olá, estou com o mesmo problema amigo,
Conseguiu a solução para a sua dúvida?