Hello everyone
I have Nexus Player, Tv, And Denon 1508 audio receiver
For now I have such seturp- the HDMI from Nexus goes to tv, and then with 2 cords goes to receiver
Is there any way to get 5 chanel audio out of hdmi? Maybe some splitter to get sound out of hdmi to optical / coaxial inputs? Any other ideas?
myshyak said:
Hello everyone
I have Nexus Player, Tv, And Denon 1508 audio receiver
For now I have such seturp- the HDMI from Nexus goes to tv, and then with 2 cords goes to receiver
Is there any way to get 5 chanel audio out of hdmi? Maybe some splitter to get sound out of hdmi to optical / coaxial inputs? Any other ideas?
Click to expand...
Click to collapse
If your receiver has no HDMI inputs, you'll have to convert/split the HDMI signal. Monoprice sells just such a box for around $35:
http://www.monoprice.com/Product?c_id=101&cp_id=10114&cs_id=1011412&p_id=10251&seq=1&format=2
Good luck.
edit: I looked up your receiver and it seems to have 2 HDMI inputs (and one monitor/output to send to your TV). Is there any reason why you don't have the Nexus Player hooked up to your Denon via HDMI so it can decode your 5.1 audio directly?
It has hdmi imputs, but only as the switch, it can't take audio from there, unfortunately
Sent from my Nexus 7 using XDA Free mobile app
Thanks for link, it is exactly what I need
Sent from my Nexus 7 using XDA Free mobile app
Does your TV not have optical outs? I plug my np into TV and take optical outs to receiver and works great.
volwrath said:
Does your TV not have optical outs? I plug my np into TV and take optical outs to receiver and works great.
Click to expand...
Click to collapse
Most TV optical outs will only give you 2.0 PCM stereo. With the above box, it'll passthrough the original Dolby Digital and/or DTS 5.1/7.1 signal to your receiver for it to decode. Due to bandwidth limitations, optical cannot support PCM 5.1, so DTS-HD Master Audio or DD TrueHD would be out, but it'd pass the embedded DTS and DD signal from those.
i havent had the chance to pick up the player yet, as it is not out in the uk, but i hope that 5.0 support for USB DAC's will make it work with one of these and an otg cable
http://www.turtlebeach.com/product-detail/sound-cards-accessories/audio-advantage-micro-ii/31
Elrondolio said:
Most TV optical outs will only give you 2.0 PCM stereo. With the above box, it'll passthrough the original Dolby Digital and/or DTS 5.1/7.1 signal to your receiver for it to decode. Due to bandwidth limitations, optical cannot support PCM 5.1, so DTS-HD Master Audio or DD TrueHD would be out, but it'd pass the embedded DTS and DD signal from those.
Click to expand...
Click to collapse
Good points. My receiver is old and doesn't do dts-hd or truehd.
Same Issue
I am having a similar issue, I have the nexus player connected to an hdmi to spdif splitter. HDMI continues onto the TV, the spdif cable goes to a Sonos Playbar. I tried the same setup with my xbox 360 and was able to get 5.1 surround out of the sonos. But with the Nexus Player I am having no luck, I am just getting stereo audio. Anyone have any ideas?
XBMC will convert 5.1 signals to Dolby Pro Logic 2 which you can decode with your receiver for 5.1 sound.
Let's just hope that you're playing local media.
I made another thread, didnt see this before hand. Anyways my np is connected hdmi to the tv (so is everything else) and then optical out from tv to receiver . and surround is not working from np.
Everything else (xbox and what not) 5.1 works just fine
Giroyac said:
I made another thread, didnt see this before hand. Anyways my np is connected hdmi to the tv (so is everything else) and then optical out from tv to receiver . and surround is not working from np.
Everything else (xbox and what not) 5.1 works just fine
Click to expand...
Click to collapse
It is a pretty rare TV that will output anything but 2.0 LPCM from sources connected to it via HDMI, even if those HDMI sources were passed DD and DTS - almost all TVs will decode and mix those streams down to stereo 2.0 LPCM for optical out to receiver. Internal TV sources are usually broadcast in Dolby Digital or DTS 5.1 over optical (such as Samsung Hub apps, etc), but external HDMI devices are almost always another story. However there are a few select TV sets that will indeed passthrough DD and DTS signals via external HDMI over its optical out, so maybe you have one.
One thing for absolute sure: the SPDIF standard (both optical and coaxial) does NOT has the bandwidth to pass 5.1 LPCM, no matter what the source (internal or HDMI). That is most likely the issue you are having with the Nexus as many apps will be transmitting uncompressed 5.1 LPCM over HDMI to receiver/TV.
One way to verify your set for sure is to install kodi on the Nexus. In kodi settings, make sure you select 5.1 channel output and enable passthrough for both Dolby Digital and DTS. The HDMI will then pass both of those signals unmolested to your TV, assuming your source DD and DTS in mkv's etc. If your TV is indeed a rare set that passes HDMI DD and DTS to its optical out, you should get the Dolby Digital and DTS signals from kodi at your receiver (with the optical connection from your TV). If kodi-hdmi-optical-receiver is receiving LPCM 2.0, it is indeed like most and downmixing internally.
Good luck.
Elrondolio said:
It is a pretty rare TV that will output anything but 2.0 LPCM from sources connected to it via HDMI, even if those HDMI sources were passed DD and DTS - almost all TVs will decode and mix those streams down to stereo 2.0 LPCM for optical out to receiver. Internal TV sources are usually broadcast in Dolby Digital or DTS 5.1 over optical (such as Samsung Hub apps, etc), but external HDMI devices are almost always another story. However there are a few select TV sets that will indeed passthrough DD and DTS signals via external HDMI over its optical out, so maybe you have one.
One thing for absolute sure: the SPDIF standard (both optical and coaxial) does NOT has the bandwidth to pass 5.1 LPCM, no matter what the source (internal or HDMI). That is most likely the issue you are having with the Nexus as many apps will be transmitting uncompressed 5.1 LPCM over HDMI to receiver/TV.
One way to verify your set for sure is to install kodi on the Nexus. In kodi settings, make sure you select 5.1 channel output and enable passthrough for both Dolby Digital and DTS. The HDMI will then pass both of those signals unmolested to your TV, assuming your source DD and DTS in mkv's etc. If your TV is indeed a rare set that passes HDMI DD and DTS to its optical out, you should get the Dolby Digital and DTS signals from kodi at your receiver (with the optical connection from your TV). If kodi-hdmi-optical-receiver is receiving LPCM 2.0, it is indeed like most and downmixing internally.
Good luck.
Click to expand...
Click to collapse
Thanks for the informative reply, so what it is the best way to connect this to get 5.1 surround ?my surround system is basically a home theater blue ray player, is it even possible ?
---------- Post added at 09:49 AM ---------- Previous post was at 09:07 AM ----------
Elrondolio said:
It is a pretty rare TV that will output anything but 2.0 LPCM from sources connected to it via HDMI, even if those HDMI sources were passed DD and DTS - almost all TVs will decode and mix those streams down to stereo 2.0 LPCM for optical out to receiver. Internal TV sources are usually broadcast in Dolby Digital or DTS 5.1 over optical (such as Samsung Hub apps, etc), but external HDMI devices are almost always another story. However there are a few select TV sets that will indeed passthrough DD and DTS signals via external HDMI over its optical out, so maybe you have one.
One thing for absolute sure: the SPDIF standard (both optical and coaxial) does NOT has the bandwidth to pass 5.1 LPCM, no matter what the source (internal or HDMI). That is most likely the issue you are having with the Nexus as many apps will be transmitting uncompressed 5.1 LPCM over HDMI to receiver/TV.
One way to verify your set for sure is to install kodi on the Nexus. In kodi settings, make sure you select 5.1 channel output and enable passthrough for both Dolby Digital and DTS. The HDMI will then pass both of those signals unmolested to your TV, assuming your source DD and DTS in mkv's etc. If your TV is indeed a rare set that passes HDMI DD and DTS to its optical out, you should get the Dolby Digital and DTS signals from kodi at your receiver (with the optical connection from your TV). If kodi-hdmi-optical-receiver is receiving LPCM 2.0, it is indeed like most and downmixing internally.
Good luck.
Click to expand...
Click to collapse
Oh and in xbmc i chose 5.1 but theres nothing in regards to passthrough setting or what not.
Elrondolio said:
It is a pretty rare TV that will output anything but 2.0 LPCM from sources connected to it via HDMI, even if those HDMI sources were passed DD and DTS - almost all TVs will decode and mix those streams down to stereo 2.0 LPCM for optical out to receiver. Internal TV sources are usually broadcast in Dolby Digital or DTS 5.1 over optical (such as Samsung Hub apps, etc), but external HDMI devices are almost always another story. However there are a few select TV sets that will indeed passthrough DD and DTS signals via external HDMI over its optical out, so maybe you have one.
One thing for absolute sure: the SPDIF standard (both optical and coaxial) does NOT has the bandwidth to pass 5.1 LPCM, no matter what the source (internal or HDMI). That is most likely the issue you are having with the Nexus as many apps will be transmitting uncompressed 5.1 LPCM over HDMI to receiver/TV.
One way to verify your set for sure is to install kodi on the Nexus. In kodi settings, make sure you select 5.1 channel output and enable passthrough for both Dolby Digital and DTS. The HDMI will then pass both of those signals unmolested to your TV, assuming your source DD and DTS in mkv's etc. If your TV is indeed a rare set that passes HDMI DD and DTS to its optical out, you should get the Dolby Digital and DTS signals from kodi at your receiver (with the optical connection from your TV). If kodi-hdmi-optical-receiver is receiving LPCM 2.0, it is indeed like most and downmixing internally.
Good luck.
Click to expand...
Click to collapse
Thanks alot. You caused me to research my Samsung TV and I have found that I am only received prologic over my tv now i am going to have to buy an receiver.
Giroyac said:
Thanks for the informative reply, so what it is the best way to connect this to get 5.1 surround ?my surround system is basically a home theater blue ray player, is it even possible ?
Oh and in xbmc i chose 5.1 but theres nothing in regards to passthrough setting or what not.
Click to expand...
Click to collapse
In XBMC/kodi, you need to select either the advanced or expert option at the bottom of the settings dialog before you can see more setting options on each page. I believe the DD and DTS passthrough setting is revealed when you choose advanced.
As for getting 5.1 (compressed DD or DTS) to an older receiver that only has SPDIF optical or coaxial inputs: as posted above there are inexpensive $35 intermediate boxes that can split the DD and DTS signals from an HDMI input and send those along to an additional SPDIF output, as well as sending the original HDMI video/audio along via HDMI out to your TV.
http://www.monoprice.com/Product?c_id=101&cp_id=10114&cs_id=1011412&p_id=10251&seq=1&format=2
Or, if you have multiple HDMI sources and want one HDMI out to TV as well as one SPDIF output to your receiver:
http://www.monoprice.com/Product?c_id=101&cp_id=10110&cs_id=1011002&p_id=7974&seq=1&format=2
If your original sources are guaranteed to only be sending 2.0-5.1 Dolby Digital and/or DTS (as well as up to 2.1 LPCM), such a box will work great. This includes streaming most local or NAS sources via mkv's, etc through Plex or XBMC/kodi. If you are feeding any HDMI sources that contain uncompressed 5.1 LPCM or Dolby Digital Plus, etc, it'd only pass 2.0 LPCM from those sources over optical/coaxial. You'd need a more expensive box that can do the same as above but additionally re-encode all signals to 5.1 Dolby Digital before sending out over optical/coaxial if you needed/wanted 5.1 LPCM, AAC, DD+, etc sources to be in 5.1 over optical.
tl;dr: you don't have to replace your older receiver if you are streaming local media sources of up to 5.1 Dolby Digital or DTS. If you want to support online sources that may stream DD+ or uncompressed 5.1 LPCM, however, a more expensive converter box will be needed than above or, in most cases a better idea, you'd need to upgrade your receiver.
---------- Post added at 09:20 AM ---------- Previous post was at 09:15 AM ----------
volwrath said:
Thanks alot. You caused me to research my Samsung TV and I have found that I am only received prologic over my tv now i am going to have to buy an receiver.
Click to expand...
Click to collapse
See above post... you may not need a new receiver depending on your needs.
Elrondolio said:
In XBMC/kodi, you need to select either the advanced or expert option at the bottom of the settings dialog before you can see more setting options on each page. I believe the DD and DTS passthrough setting is revealed when you choose advanced.
As for getting 5.1 (compressed DD or DTS) to an older receiver that only has SPDIF optical or coaxial inputs: as posted above there are inexpensive $35 intermediate boxes that can split the DD and DTS signals from an HDMI input and send those along to an additional SPDIF output, as well as sending the original HDMI video/audio along via HDMI out to your TV.
http://www.monoprice.com/Product?c_id=101&cp_id=10114&cs_id=1011412&p_id=10251&seq=1&format=2
Or, if you have multiple HDMI sources and want one HDMI out to TV as well as one SPDIF output to your receiver:
http://www.monoprice.com/Product?c_id=101&cp_id=10110&cs_id=1011002&p_id=7974&seq=1&format=2
If your original sources are guaranteed to only be sending 2.0-5.1 Dolby Digital and/or DTS (as well as up to 2.1 LPCM), such a box will work great. This includes streaming most local or NAS sources via mkv's, etc through Plex or XBMC/kodi. If you are feeding any HDMI sources that contain uncompressed 5.1 LPCM or Dolby Digital Plus, etc, it'd only pass 2.0 LPCM from those sources over optical/coaxial. You'd need a more expensive box that can do the same as above but additionally re-encode all signals to 5.1 Dolby Digital before sending out over optical/coaxial if you needed/wanted 5.1 LPCM, AAC, DD+, etc sources to be in 5.1 over optical.
tl;dr: you don't have to replace your older receiver if you are streaming local media sources of up to 5.1 Dolby Digital or DTS. If you want to support online sources that may stream DD+ or uncompressed 5.1 LPCM, however, a more expensive converter box will be needed than above or, in most cases a better idea, you'd need to upgrade your receiver.
---------- Post added at 09:20 AM ---------- Previous post was at 09:15 AM ----------
See above post... you may not need a new receiver depending on your needs.
Click to expand...
Click to collapse
Holly crap dude, that must've been the best response I've got on any thread on any forum.
Thanks a lot.
So since from your previous replies you mentioned the nexus player uses 5.1 lpcm in many of the apps (which im assuming includes google play, netflix and what not) im either stuck buying the expensive splitter thing or a new receiver.
To be honest, i dont think either would help, since my main concern was watching show box movies with surround. Which i recently learned doesnt have 5.1 audio regardless. I guess same applies to xbmc (depending on what is streaming and if it does 5.1 or not)
Does what i said kind of makes sense to you ? I apologize for my noobness
Giroyac said:
Holly crap dude, that must've been the best response I've got on any thread on any forum.
Thanks a lot.
So since from your previous replies you mentioned the nexus player uses 5.1 lpcm in many of the apps (which im assuming includes google play, netflix and what not) im either stuck buying the expensive splitter thing or a new receiver.
To be honest, i dont think either would help, since my main concern was watching show box movies with surround. Which i recently learned doesnt have 5.1 audio regardless. I guess same applies to xbmc (depending on what is streaming and if it does 5.1 or not)
Does what i said kind of makes sense to you ? I apologize for my noobness
Click to expand...
Click to collapse
Thanks. Yes, what you wrote makes sense and isn't noobie at all. There are some addon streams that XBMC/kodi can pass 5.1 from to your receiver, but you are correct that the vast majority of streams are indeed only in stereo or, at best, Pro Logic. As for Netflix and Google Play over the NP: I'm not sure what it streams as I've been on the road so much and haven't had the time with the NP to check it out. Some on these boards are saying that Netflix is only sending 2.0 LPCM on the Nexus right now. I'm sure someone else can chime in with more direct NP testing. If your main concern is getting a ripped media collection in 5.1 over an older receiver, the converter box applies. Otherwise, it does not.
Take care.
Elrondolio said:
Thanks. Yes, what you wrote makes sense and isn't noobie at all. There are some addon streams that XBMC/kodi can pass 5.1 from to your receiver, but you are correct that the vast majority of streams are indeed only in stereo or, at best, Pro Logic. As for Netflix and Google Play over the NP: I'm not sure what it streams as I've been on the road so much and haven't had the time with the NP to check it out. Some on these boards are saying that Netflix is only sending 2.0 LPCM on the Nexus right now. I'm sure someone else can chime in with more direct NP testing. If your main concern is getting a ripped media collection in 5.1 over an older receiver, the converter box applies. Otherwise, it does not.
Take care.
Click to expand...
Click to collapse
I went to my TV manual, and confirmed that it does not send DD over optical from external HDMI, and none of the apps will give DD..... except Kodi. On the .mkvs I have that are encoded DD, Kodi appears to be passing 5.1 DD just fine through my TVs toslink. It is lighting up the DD light and coming through in surround, but so far its the only app I have found to do this. Neither netflix nor google movies nor any games I have found will light up DD.
Any thoughts on how further to test it or do you have any apps that should be DD? Can you confirm Google movies is in DD? I bought an HDMI converter tonight but cancelled the order until I figure out what is going on. Its not very impressive that Google left a lot of apps without DD.
volwrath said:
I went to my TV manual, and confirmed that it does not send DD over optical from external HDMI, and none of the apps will give DD..... except Kodi. On the .mkvs I have that are encoded DD, Kodi appears to be passing 5.1 DD just fine through my TVs toslink. It is lighting up the DD light and coming through in surround, but so far its the only app I have found to do this. Neither netflix nor google movies nor any games I have found will light up DD.
Any thoughts on how further to test it or do you have any apps that should be DD? Can you confirm Google movies is in DD? I bought an HDMI converter tonight but cancelled the order until I figure out what is going on. Its not very impressive that Google left a lot of apps without DD.
Click to expand...
Click to collapse
The same here Kodi is the only app passing DD and DTS everything else including plex does stereo only.
WhiteWidows said:
The same here Kodi is the only app passing DD and DTS everything else including plex does stereo only.
Click to expand...
Click to collapse
This may be the biggest issue with the NP to date! Even the older GoogleTV passed DD.
Hi,
Please, someone could tell me why I have no 5.1 surround on my 2015 NVS when I watch Netflix or Amazon?
I can get 5.1 sound when I watch a 5.1 movie with Archos player.
If I watch Netflix or Amazon directly on my tv the sound is 5.1.
Thanks
Depends of you receiver, connections etc. Needs to be Dolby Digital Plus compatible for Netflix I believe, through HDMI. If a USB -> Optical dongle is used for example, you'll have 5.1 in Kodi and other apps for Dolby Digital and DTS, but won't get 5.1 in Netflix.
How is everything plugged?
MrBungle67 said:
Depends of you receiver, connections etc. Needs to be Dolby Digital Plus compatible for Netflix I believe, through HDMI. If a USB -> Optical dongle is used for example, you'll have 5.1 in Kodi and other apps for Dolby Digital and DTS, but won't get 5.1 in Netflix.
How is everything plugged?
Click to expand...
Click to collapse
Thank you for your answer.
So the connections as follows: NVS is connected through HDMI to 4K LG TV. TV is optical connected to Sony receiver. As I told before, If I watch Netflix, Amazon on TV apps , the sound is ok. 5.1 . Also, if I watch a 5.1 movie with Archos player ( only) on my NVS , the sound is also ok.
technoguy09 said:
Thank you for your answer.
So the connections as follows: NVS is connected through HDMI to 4K LG TV. TV is optical connected to Sony receiver. As I told before, If I watch Netflix, Amazon on TV apps , the sound is ok. 5.1 . Also, if I watch a 5.1 movie with Archos player ( only) on my NVS , the sound is also ok.
Click to expand...
Click to collapse
That won't work, optical's bandwidth is ok for DD, but isn't sufficient for DD+ (which is the only format used by Netflix's app on the NVS).
Small extract from wikipedia:
"Physical transport for consumer devices:
IEC 61937-3: defines how to transmit Dolby Digital (AC-3) and Dolby Digital Plus (E-AC-3) bitstreams via an IEC 60958/61937 (S/PDIF) interface. However, the S/PDIF interface has insufficient bandwidth to transport Dolby Digital Plus (E-AC-3) bitstreams at the 3.0Mbit/s datarate specified by HD DVD; lower datarates are possible.
Dolby Digital Plus may be transmitted across HDMI 1.3 or newer, according to IEC 61937-3"
My understanding is that you have a 4k TV, you have the NVS (obviously 4k), but your receiver is HDMI 1.3 (1080p).
3 Options for you:
- Watch in 1080p with the shield connected to the receiver, enjoying 5.1
- Watch 4k with Shield directly to TV, but without 5.1
- Upgrade to a HDMI 2.0 compliant receiver to enjoy it all!
A lot of people went through this after upgrading to 4K, including myself!!
Hi,
I'm looking for a box that could transcode Dolby Digital Plus to dolby Digital on the flight.
My problem is that my sound system must be connected throught SPDIF and doesn't support DD+. Therefore Netflix and Prime are delivering stereo sound tracks only.
I was told that some boxes can do the transcodong. I wanted to buy the Chromecast with Google TV but unfortunately it doesn't transcode the audio.
I was close to order a Fire TV Max stick until I discoved they don't support Google Cast (TBH Google doesn't allow anyone to implement their own Google Cast device.)
I'm open to open source solution (Lineage) as long as I can run the streaming apps (Netflix, Prime) and the Google Cast service (which I think is complicated on non certified devices)
For now I plan to buy the Xiaomi TV s which includes SPDIF output.
My concern about the Xiaomi is the performance limitations and the fact that updates won't happen for long because it's a quite old device already.
I was interested with the Shield TV but the lack of USB port is a no go for me.
Anyway my goal is to get a box that solves the audio compatibility problem (SPDIF not required, HDMI extractor is acceptable) and can last for years with updates.
Not sure if this is the answer you're looking for but have a look and see. Once I went to the Nvidia Shield Pro I never looked back.
AVR / Surround Audio Setup
AVR / Surround Audio Setup
www.nvidia.com
Here's a list: https://www.avsforum.com/threads/streamers-that-will-transcode-dd-e-ac-3-to-dd-ac-3.3203865/
I just tested an onn. box myself, and, at least in my case, since I'm using an HDMI to optical extractor, I had to manually configure the onn.'s audio settings to get it to work. I had to make sure to manually switch on Dolby Digital Plus -- even though my receiver only supports Dolby Digital. After that, I was able to check it by going into Netflix and looking next to the "HD" indication on each movie or show. If I hadn't switched on Dolby Digital Plus in the onn.'s audio settings, Netflix wouldn't detect support for it, and, correspondingly, wouldn't show the "5.1" indicator next to content, continuing to pass PCM audio.