I was using pixel Extended before. started getting lot of "android intelligence stopped working" from 2 weeks. So I decided to shift to Nusantra project.
I am using Pitch Black Recovery Project which I used to Install Pixel Extended.
Steps I used.
1.Wiped data through pbrp
2.Wiped Cache Dalvik Cache.
3.Installed Nusantara Project.(Mistake)
Then the boot loop started
Did a bunch of research found out i have to Install Firmware first.
So I booted into recovery.
and did these steps.
1.Wiped data through pbrp
2.Wiped Cache Dalvik Cache.
3.Installed firmware
4.Cleared cache.
5.Installed Nusantara
6.Cleared cache.
7.Flashed Disable_Dm-verity_ForceEncrypt
8.Cleared cache
9.Wiped data
10.Wiped Cache,Dalvik Cache
11.Got stuck in recovery
Help pls
Zygrur said:
I was using pixel Extended before. started getting lot of "android intelligence stopped working" from 2 weeks. So I decided to shift to Nusantra project.
I am using Pitch Black Recovery Project which I used to Install Pixel Extended.
Steps I used.
1.Wiped data through pbrp
2.Wiped Cache Dalvik Cache.
3.Installed Nusantara Project.(Mistake)
Then the boot loop started
Did a bunch of research found out i have to Install Firmware first.
So I booted into recovery.
and did these steps.
1.Wiped data through pbrp
2.Wiped Cache Dalvik Cache.
3.Installed firmware
4.Cleared cache.
5.Installed Nusantara
6.Cleared cache.
7.Flashed Disable_Dm-verity_ForceEncrypt
8.Cleared cache
9.Wiped data
10.Wiped Cache,Dalvik Cache
11.Got stuck in recovery
Help pls
Click to expand...
Click to collapse
Use TWRP 360_10-1, it is the best for POCO M3, you overdid it a bit with that installation, it also depends on what firmware you have installed.
Related
Did system, cache and dalvik wipe.
Flashed CM 13 and tried to flash gapps 13, but all I could install was the pico version, because my system partition was too small.
After doing it I needed to wait about 2 minutes, then the app optimization started...96 apps and after that it kept rebooting and doing it all over again.
I again wiped cache and dalvik, but no change.
Any suggestions? I don't want to wipe data if possible.
My friend's device has TWRP 2.8.7.7 and CyanogenMod 12.1 by @ED300 (not up to date).
She wants it to be restored in its original state. How could I flash this file?
Code:
http://phonedl.ota.lenovomm.com/dls/v6/Kraft-A6000_S058_151030_KK2L_WC67.zip
Should I just wipe system, data, and cache in TWRP then flash the zip from the link?
1. Reboot into recovery.
2. Wipe the normal way (Factory reset).
3. Flash the .zip.
4. Wipe cache and Dalvik cache after flashing, just in case.
5. Reboot. Enjoy!
Using TWRP? Don't I have to wipe system first when coming from another ROM? Thanks,
You have to wipe system, data, cache, dalvik cache
For me that didnt work you have to extract stockrom.zip then extract system.zip then take boot.img and flash it first, followed by system.zip and yourcountry.zip
Hi, I'm from Nougat 4.5.14 and these are the steps I made:
1. Flash codeworx then reboot to twrp
2. Wipe cache and dalvik
3. Install OS 5.0.2
4. Install magisk
5. Wipe cache dalvik
6. Reboot to system
However after rebooting to system it started bootlooping so I decided to reflash OS and wipe data as recommended. So I power off the phone then hold volume down + power to boot to recovery. However when I boot to recovery, file folders started to become random names like its encrypted. Luckily I backed up my internal storage and data so I'm okay to flash everything but can someone help me how to fix the twrp random file names and the steps for reflashing the OS?
EDIT: I rebooted to recovery, wiped dalvik, cache, and data. flashed OS 5.0.2, wipe dalvik cache, flashed magisk, wipe dalvik, reboot to system and it does not proceed to circling dots. So what I did is just, wipe dalvik, cache, data, flashed OS, wipe again dalvik cache, boot to system and it proceeds to circling dots however it takes so long that I can consider this as bootloop. I'm very tempted to wipe everything (data, system, internal storage, cache, dalvik) then just flash again the OS but I don't know if it would work so I hope someone could give me some steps how to fix this
Edit 2: This is solved now: What I did is just after trying the flash OS with no magisk, I booted to system. However, i just dont boot at all so I decided to boot to recovery again, but this time the recovery is the stock one. I wipe everything I could including cache, system reset, and data (music pics etc) and it booted to the system in no time but everythings lost.
You have to format data... Not just wipe it. From TWRP go to format data, write yes, and let it format everything. Then transfer over to the phone all the fil a you need (ROM, kernel, no verity zip) and flash them as per the instructions of your rom thread. You should be fine.
panooos said:
You have to format data... Not just wipe it. From TWRP go to format data, write yes, and let it format everything. Then transfer over to the phone all the fil a you need (ROM, kernel, no verity zip) and flash them as per the instructions of your rom thread. You should be fine.
Click to expand...
Click to collapse
What I did is just after trying the flash OS with no magisk, I booted to system. However, i just dont boot at all so I decided to boot to recovery again, but this time the recovery is the stock one. I wipe everything I could including cache, system reset, and data (music pics etc) and it booted to the system in no time but everythings lost.
Edit: nvm you've solved it
Peshyy said:
Edit: nvm you've solved it
Click to expand...
Click to collapse
You can still show other solutions as others may need it sometime
I was on RR rom. I tried to install Dolby Atmos via twrp. After that phone stuck at bootanimation of RR. Can't find cache partition after that(see attachment). Then again I installed magisk and when I tried to wipe cache and dalvik cache, error occurs, can't find partition path cache(see attachment again). Will try to flash fastboot rom in 3 days. Can anyone solve this issue via twrp only? Thanks in advance.
mayukh2000 said:
I was on RR rom. I tried to install Dolby Atmos via twrp. After that phone stuck at bootanimation of RR. Can't find cache partition after that(see attachment). Then again I installed magisk and when I tried to wipe cache and dalvik cache, error occurs, can't find partition path cache(see attachment again). Will try to flash fastboot rom in 3 days. Till that can anyone solve this issue via twrp only? Thanks in advance.
Click to expand...
Click to collapse
I tried Dolby on RR rom too. I was unsuccessful but on the bright side it works on stock rom!!!
If you want Dolby to go back to stock and root and flash Dolby.
By the way its ****ING AMAZING!
mayukh2000 said:
I was on RR rom. I tried to install Dolby Atmos via twrp. After that phone stuck at bootanimation of RR. Can't find cache partition after that(see attachment). Then again I installed magisk and when I tried to wipe cache and dalvik cache, error occurs, can't find partition path cache(see attachment again). Will try to flash fastboot rom in 3 days. Till that can anyone solve this issue via twrp only? Thanks in advance.
Click to expand...
Click to collapse
You will get always the error from cache partition, as this phone don't have a cache partition, so it's normal that you get this error when you wipe cache & dalvik option after flashing something
mardrest said:
You will get always the error from cache partition, as this phone don't have a cache partition, so it's normal that you get this error when you wipe cache & dalvik option after flashing something
Click to expand...
Click to collapse
Thanks for the info. I just clean flashed the rom and everything is working fine now. I came to know that this rom has A/B partition which was causing a problem. Now I got it. Thanks again!
On RR you have to flash Dolby two times and it will be working.
Ok so I had to wipe everything and installed the rom again, then the phone booted up. Any thoughts what made the phone to bootloop? I didn't mess around with anything. Just tried to install dolby.
it failed when I tried to wipe the dalvik in twrp and then I proceeded to install a custom rom now the rom is not being installed and I cant quit twrp becuase my power button is not working somebody help
you have other issue than dalvik. format userdata partition.