EDIT: Unfortunatelly this is not working any more due to recent SafetyNet updates
Hello everyone. This is first guide i'm trying to write here so don't be to harsh for me also sorry for my english, it's not my native language.
After almost 3 days of messing with various roms and kernels i finally managed to successfully installl Magisk V6 on my Z3 D6633 (yes, Pokemon Go 0.37 works too ) .
First of all you need unlocked bootloader. Without it you won't be able to flash custom kernel. Also, if your kernel is still locked, and you want to unlock it remember that doing so will wipe all data from your device, so backup everything that is important to you prior to following this guide.
This is the setup that works for me:
SLiMM 3.1 rom by Wajk:
http://forum.xda-developers.com/z3/development/rom-slimm-t3359907
Advanced stock/beta kernel Marshmallow 6.0.1 - 06/aug/2016 by Gustavo RD78:
http://forum.xda-developers.com/z3/development/kernel-advanced-stock-kernel-t3345880
Magisk v6 - The Universal Systemless Interface by topjohnwu:
http://forum.xda-developers.com/android/software/mod-magisk-v1-universal-systemless-t3432382
Here are the steps:
1. flash rom with 6633 patch, reboot
2. full unroot and clean in SuperSU, reboot
3. flash kernel, reboot
4. flash Magisk V6 and PHH root, reboot
5. install PHH root from play store and Magisk Manager
I used SafetyNet Helper to verify if SafetyNet is working several times during all those steps:
after 1 - not working,
after 2 - working,
after 3 - working,
after 4 - not working,
after 5 - not working,
after disabling root in Magisk Manager - working.
Hope it helps someone
Hi,
For this tutorial I still need the unlocked bootloader?
Regards!
ask the following I
is a LB or UB requirement ?
If the Rom matter as long as the kernel is flashed ?
If the whole with D6603 ?
Thanks for your tutorial
adripred said:
Hi,
For this tutorial I still need the unlocked bootloader?
Regards!
Click to expand...
Click to collapse
smellz said:
ask the following I
is a LB or UB requirement ?
If the Rom matter as long as the kernel is flashed ?
If the whole with D6603 ?
Thanks for your tutorial
Click to expand...
Click to collapse
I haven't try with locked bootloader, because I unlocked mine a while ago, but in the kernel thread there is info that unlocked bootloader is required. It might be possible to do it with other roms, as long as they work with Advanced Stock Kernel from the link in first post. D6603 should work too, only difference is that you don't need dual sim patch for SLiMM 3.1 rom
I must have had a similar problem to you originally, I had a working D6603 with a Rooted Marshmellow 6 Rom.
Then, performed the following Steps;
1. Unroot (Inside the SuperSU App)
2. Booted into TWRP and flashed Magisk - v6
3. Then Flashed phh 's systemless superuser
I rebooted the phone and now it is not working. Does not Boot, Black Screen.
The Led will flash red quickly and I am not able to boot into TWRP.
I can see the Phone is Recognised by the Computer (S1 /SOMC Flash Device in Device Manager.)
Could someone please post step by step instructions to restore a to Marshmellow Rom (Any)?
Will I have to download an Image and a Flashtool?
same problem here. I manage to boot to twrp by flashing back the recovery image using fastboot.
Z3- said:
I must have had a similar problem to you originally, I had a working D6603 with a Rooted Marshmellow 6 Rom.
Then, performed the following Steps;
1. Unroot (Inside the SuperSU App)
2. Booted into TWRP and flashed Magisk - v6
3. Then Flashed phh 's systemless superuser
I rebooted the phone and now it is not working. Does not Boot, Black Screen.
The Led will flash red quickly and I am not able to boot into TWRP.
I can see the Phone is Recognised by the Computer (S1 /SOMC Flash Device in Device Manager.)
Could someone please post step by step instructions to restore a to Marshmellow Rom (Any)?
Will I have to download an Image and a Flashtool?
Click to expand...
Click to collapse
Resolved using Emma. I installed the S1 SOMC Flash Device Drivers and I was able to download lollypop.
I will attempt now to reinstall recovery, new rom, and Magisk
Guide helped alot thanks!
Important part was to uninstall SuperSU. Before that ROM appeared to reject the kernel or vice versa, but now it boots on Fragment ROM and unmount seems to work!
Better be worth unlocking the BL
Z3- said:
I must have had a similar problem to you originally, I had a working D6603 with a Rooted Marshmellow 6 Rom.
Then, performed the following Steps;
1. Unroot (Inside the SuperSU App)
2. Booted into TWRP and flashed Magisk - v6
3. Then Flashed phh 's systemless superuser
I rebooted the phone and now it is not working. Does not Boot, Black Screen.
The Led will flash red quickly and I am not able to boot into TWRP.
I can see the Phone is Recognised by the Computer (S1 /SOMC Flash Device in Device Manager.)
Could someone please post step by step instructions to restore a to Marshmellow Rom (Any)?
Will I have to download an Image and a Flashtool?
Click to expand...
Click to collapse
Just flash stock kernel with flashtool.
This Process worked for Me - D6603
1. flash SLIM Rom 6603 and reboot
2. Disable SuperSu, Unroot SuperSu, Boot to Recovery and Wipe Davilk, Reboot
3. Reboot to Recovery, Flash Advanced Kernel, Reboot
4. Flash Magisk V6 and PHH root, Reboot
5. install PHH Super from play store and Magisk Manager
Thanks for the tuto.
Of course you need to have Unlocked Bootloader, this is the principle of flashing a custom kernel. And systemless root like magisk needs custom kernel. With LB you will not boost after flashing a custom kernel.
kotlin said:
Hello everyone. This is first guide i'm trying to write here so don't be to harsh for me also sorry for my english, it's not my native language.
After almost 3 days of messing with various roms and kernels i finally managed to successfully installl Magisk V6 on my Z3 D6633 (yes, Pokemon Go 0.37 works too ) .
This is the setup that works for me:
SLiMM 3.1 rom by Wajk:
http://forum.xda-developers.com/z3/development/rom-slimm-t3359907
Advanced stock/beta kernel Marshmallow 6.0.1 - 06/aug/2016 by Gustavo RD78:
http://forum.xda-developers.com/z3/development/kernel-advanced-stock-kernel-t3345880
Magisk v6 - The Universal Systemless Interface by topjohnwu:
http://forum.xda-developers.com/android/software/mod-magisk-v1-universal-systemless-t3432382
Here are the steps:
1. flash rom with 6633 patch, reboot
2. full unroot and clean in SuperSU, reboot
3. flash kernel, reboot
4. flash Magisk V6 and PHH root, reboot
5. install PHH root from play store and Magisk Manager
I used SafetyNet Helper to verify if SafetyNet is working several times during all those steps:
after 1 - not working,
after 2 - working,
after 3 - working,
after 4 - not working,
after 5 - not working,
after disabling root in Magisk Manager - working.
Hope it helps someone
Click to expand...
Click to collapse
thanks for sharing this... and did you try to install Systemless Xposed? is it working on your Z3?
It didnt work for me... the Magisk manager cannot toggle Root...it just greyed out...
kotlin said:
Hello everyone. This is first guide i'm trying to write here so don't be to harsh for me also sorry for my english, it's not my native language.
After almost 3 days of messing with various roms and kernels i finally managed to successfully installl Magisk V6 on my Z3 D6633 (yes, Pokemon Go 0.37 works too ) .
This is the setup that works for me:
SLiMM 3.1 rom by Wajk:
http://forum.xda-developers.com/z3/development/rom-slimm-t3359907
Advanced stock/beta kernel Marshmallow 6.0.1 - 06/aug/2016 by Gustavo RD78:
http://forum.xda-developers.com/z3/development/kernel-advanced-stock-kernel-t3345880
Magisk v6 - The Universal Systemless Interface by topjohnwu:
http://forum.xda-developers.com/android/software/mod-magisk-v1-universal-systemless-t3432382
Here are the steps:
1. flash rom with 6633 patch, reboot
2. full unroot and clean in SuperSU, reboot
3. flash kernel, reboot
4. flash Magisk V6 and PHH root, reboot
5. install PHH root from play store and Magisk Manager
I used SafetyNet Helper to verify if SafetyNet is working several times during all those steps:
after 1 - not working,
after 2 - working,
after 3 - working,
after 4 - not working,
after 5 - not working,
after disabling root in Magisk Manager - working.
Hope it helps someone
Click to expand...
Click to collapse
thnx for this workaround. if you follow it to the letter, you should be fine, else it won't work, and you still get "cts profile match: false"
( it cost me 2 attempts because i flashed the kernel directly)
finally there is someone who desire to create specific systemless method with magisk for xperia device line
unfortunately I've tried earlier than this thread exist so I have to clearance to noob xperia user, here's my post
ryandxter said:
well well I'm here just to give specific classification / explanation about what is this projects do
I'm here to say that this method is about modifying boot partition to make systemless works (correct me if I'm wrong), since my device was Xperia Z3 then this require "unlocked bootloader" for any Xperia device in case to use custom boot.img script from this projects... please please OP underline this before another people from Xperia users with locked bootloader flash this projects, thanks
I'm already tried on myself almost hardbricking my phone and this isn't funny
Click to expand...
Click to collapse
that's mean xperia device line (no exception) need to be Unlocked Bootloader before flashing magisk otherwise the'll soft brick
hi mr @kotlin can you add this to OP for specific clarification?
that's mean xperia device line (no exception) need to be Unlocked Bootloader before flashing magisk otherwise the'll soft brick
hi mr @kotlin can you add this to OP for specific clarification?
Click to expand...
Click to collapse
and don't forget that unlocking the bootloader is easy, but your phone will be wiped clean.
( i forgot about that....)
Z3- said:
This Process worked for Me - D6603
1. flash SLIM Rom 6603 and reboot
2. Disable SuperSu, Unroot SuperSu, Boot to Recovery and Wipe Davilk, Reboot
3. Reboot to Recovery, Flash Advanced Kernel, Reboot
4. Flash Magisk V6 and PHH root, Reboot
5. install PHH Super from play store and Magisk Manager
Click to expand...
Click to collapse
This worked for me!
ataraxist said:
thanks for sharing this... and did you try to install Systemless Xposed? is it working on your Z3?
It didnt work for me... the Magisk manager cannot toggle Root...it just greyed out...
Click to expand...
Click to collapse
Yes I installed Systemless Xposed from magisk thread, it works like a charm, hadn't any problems Did you followed all the steps? It's order is very important. You have unlocked bl? I just put info in op that it is necessary. For me toggle root was greyed out when i didn't properly flashed magisk to kernel, or after restoring kernel. Try to make backup and follow the steps again.
ryandxter said:
finally there is someone who desire to create specific systemless method with magisk for xperia device line
unfortunately I've tried earlier than this thread exist so I have to clearance to noob xperia user, here's my post
that's mean xperia device line (no exception) need to be Unlocked Bootloader before flashing magisk otherwise the'll soft brick
hi mr @kotlin can you add this to OP for specific clarification?
Click to expand...
Click to collapse
Thanks, just did that
kotlin said:
Yes I installed Systemless Xposed from magisk thread, it works like a charm, hadn't any problems Did you followed all the steps? It's order is very important. You have unlocked bl? I just put info in op that it is necessary. For me toggle root was greyed out when i didn't properly flashed magisk to kernel, or after restoring kernel. Try to make backup and follow the steps again.
Thanks, just did that
Click to expand...
Click to collapse
I'm coming from Xperia Z... not z3
can't be sure if the problem is coming from different advance stock kernel...
Thanks for sharing the steps...I will try again when I have time...
I finally got it working after several attempts. Everyting went well with unlocking the bootloader and installing the rom.
In magisk manager i got Selinux toggle working for me. I just cant use the root toggle. The toggle is on, and if i want to disable it it says: magisk manager is granted superuser acces. Then it turns the toggle back on. Should i not grant SU acces to the magisk manager or is there another problem?
I've had this working a while and even used Android Pay for the first time. However Viper4Android doesn't seem to be working well and sounds are too quiet do any existing mods still work or would they break SafetyNet?
Hello
I am trying to root my huawei P8-Lite ALE-L21C185B525. I have tried all methods but haven't succeeded. (SuperSU , Kingoroot, etc)
I have unlocked bootloader and have also installed TWRP successfully. But when I install SuperSU zip file from TWRP and reboot, my phone stuck on Huawei logo (bootloop).
I also tried updating my firmware to B560 but my issue remains same on this updated firmware.
Is there any better way to root my phone or any solution for installing SuperSU.
NoyanR said:
Hello
I am trying to root my huawei P8-Lite ALE-L21C185B525. I have tried all methods but haven't succeeded. (SuperSU , Kingoroot, etc)
I have unlocked bootloader and have also installed TWRP successfully. But when I install SuperSU zip file from TWRP and reboot, my phone stuck on Huawei logo (bootloop).
I also tried updating my firmware to B560 but my issue remains same on this updated firmware.
Is there any better way to root my phone or any solution for installing SuperSU.
Click to expand...
Click to collapse
You might need to install SuperSu in system-less mode. Check root tutorial form this thread https://forum.xda-developers.com/p8lite/general/mega-thread-root-unbricking-updating-t3400994 thought instead of doing all steps I think it's enough to install 1.zip then flash normal SuperSu zip (if it says it's installing system-less it works) then reboot phone, you might get 1 or 2 bootloops on first boot.
Try supersu v2.62
NoyanR said:
Hello
I am trying to root my huawei P8-Lite ALE-L21C185B525. I have tried all methods but haven't succeeded. (SuperSU , Kingoroot, etc)
I have unlocked bootloader and have also installed TWRP successfully. But when I install SuperSU zip file from TWRP and reboot, my phone stuck on Huawei logo (bootloop).
I also tried updating my firmware to B560 but my issue remains same on this updated firmware.
Is there any better way to root my phone or any solution for installing SuperSU.
Click to expand...
Click to collapse
Try magisk..........
keikari said:
You might need to install SuperSu in system-less mode. Check root tutorial form this thread https://forum.xda-developers.com/p8lite/general/mega-thread-root-unbricking-updating-t3400994 thought instead of doing all steps I think it's enough to install 1.zip then flash normal SuperSu zip (if it says it's installing system-less it works) then reboot phone, you might get 1 or 2 bootloops on first boot.
Click to expand...
Click to collapse
Thanks God !
You really solved my problem by providing link to that thread.
I successfully rooted now.....
NoyanR said:
Hello
I am trying to root my huawei P8-Lite ALE-L21C185B525. I have tried all methods but haven't succeeded. (SuperSU , Kingoroot, etc)
I have unlocked bootloader and have also installed TWRP successfully. But when I install SuperSU zip file from TWRP and reboot, my phone stuck on Huawei logo (bootloop).
I also tried updating my firmware to B560 but my issue remains same on this updated firmware.
Is there any better way to root my phone or any solution for installing SuperSU.
Click to expand...
Click to collapse
how to root your phone
Failed
Hello guys, I have a ZE500KL on 6.0.1 rooted systemless with SuperSU 2.65 (followed this guide in the forum but unlocked with official bootloader)
I cannot find accurate explaination about how to safely install XPOSED on my device, maybe because I'm noob and it's easier than I think?
I never flashed TWRP as my recovery, i've always used it by booting it from PC with ADB.
So far I have stock recovery, and systemless root only (which seems to be stable, I rebooted many times and never disappeared)
What are the steps I must take?
There is a guide for Lollipop, but not for Marshamallow so far
Thank you :fingers-crossed:
skytcher said:
Hello guys, I have a ZE500KL on 6.0.1 rooted systemless with SuperSU 2.65 (followed this guide in the forum but unlocked with official bootloader)
I cannot find accurate explaination about how to safely install XPOSED on my device, maybe because I'm noob and it's easier than I think?
I never flashed TWRP as my recovery, i've always used it by booting it from PC with ADB.
So far I have stock recovery, and systemless root only (which seems to be stable, I rebooted many times and never disappeared)
What are the steps I must take?
There is a guide for Lollipop, but not for Marshamallow so far
Thank you :fingers-crossed:[/QUOTE
Click to expand...
Click to collapse
I already solved using Magisk and installing Xposed magisk module, 100% works and saves time.
Thank you anyway.
Can anyone give me instructons on how to twrp n rot sm-j320zn ? I cant find the corrcy twrp for this model not having much luck thanks guys
koniva85 said:
Can anyone give me instructons on how to twrp n rot sm-j320zn ? I cant find the corrcy twrp for this model not having much luck thanks guys
Click to expand...
Click to collapse
Don't know if you still need the info, but I've just worked out TWRP. I've been rooted for ages but never saw your post; it's only because I decided to try TWRP again that I found you in a Google search.
TWRP that works on the J320ZN is for j3lte. To download: https://dl.twrp.me/j3lte/
Others have had issues installing SuperSU.zip in TWRP.... as did I. The only way to get root that would work is CF-Auto-Root..... because usually SuperSU.zip would then cause a bootloop. BUT of course, what I didn't realize at the time, was CF-Auto-Root once installed reflashed stock recovery! But what it DID enable me to work out (once it clicked in my head that this was going to be the issue and after I'd nearly set up my phone again) was that I was getting a dm-verity error.... something I know nothing about other than it's a new thing I have to do on my Samsung Galaxy Tab A. So MAYBE SuperSU wasn't installing because of that? Who knows.
Anyway, now I'm fully working with TWRP and root and it's sticking with no problems.
So install TWRP the usual way....(I used twrp-3.2.1-0-j3lte.img from the link above). If you need help with this quote me and ask, or look for a TWRP tutorial on j3lte (I know the J320YZ uses this TWRP and has a tutorial on how to install TWRP with Odin).
Then install the latest SuperSU.zip:
https://download.chainfire.eu/1220/SuperSU/SR5-SuperSU-v2.82-SR5-20171001224502.zip through TWRP "Install" method.... it must be on your external SD card. Go to the "Install" button on TWRP menu, select storage to extSD and then find SuperSU.zip.
THEN I had to install the Dm-verity and Forced Encryption Disabler through TWRP "Install" method (so this file also needs to be on your external SD card):
https://androidfilebox.com/miscellaneous/dm-verity-and-forced-encryption-disabler/
I used no-verity-opt-encrypt-6.0.zip
Then reboot, and reset up your phone.
FINALLY!
Whether you need to do the dm-verity thing I don't know... I'm FAR from an expert. This was all through trial and error but it is the only way to keep root through TWRP without CF-Auto-Root.....FOR ME PERSONALLY.
You could try just TWRP and the latest version of of SuperSU.zip through TWRP....see if that works. If you get stuck in a bootloop, then I just flashed CF-Auto-Root with Odin and it fixed that.... then start the install process again, this time adding dm-verity patch AFTER SuperSU.zip.
If you want to skip TWRP and just root your phone, then the easiest way is to flash CF-Auto-Root with Odin. File at https://download.chainfire.eu/986/CF...etrieve_file=1.
Hello. How to root last android 9 on redmi 7a ???? All updates is installed to last , bootloader is unlocked . Magisk and patch VIA twrp dont working . How can i root ????
MAREK10747 said:
Hello. How to root last android 9 on redmi 7a ???? All updates is installed to last , bootloader is unlocked . Magisk and patch VIA twrp dont working . How can i root ????
Click to expand...
Click to collapse
I have the same problem, i unlocked bootloader, installed Twrp with Linux mint with terminal (sudo)
Installed succesfully, i booted in and i tryied to install magisk, it says it was succesfull, so i booted into system, but the magisk says, it is not installed, same when i tryed to root it by that twrp, just nothing....
TheRealSalads said:
I have the same problem, i unlocked bootloader, installed Twrp with Linux mint with terminal (sudo)
Installed succesfully, i booted in and i tryied to install magisk, it says it was succesfull, so i booted into system, but the magisk says, it is not installed, same when i tryed to root it by that twrp, just nothing....
Click to expand...
Click to collapse
I've read many post that say root is'n possible in redmi7a but it's not true. If magisk is not working then it's not the end there's many ways to root. There's many problems arise in technology but the options remains. We can gain root by Phh-Su in this device or any other phh treble enabled devices.
Here's Phh-Su :
Reboot in custom recovery and flash Phh-Su installer and you are done. If you don't want then flash the uninstaller.
Phh-Su installer
Phh-Su unistallater
TWRP Recovery
Hello how to root iOS 11.1