Hello,
I used TWRP to upload custom rom and it was ok.
Unfortunately (can't remember what anymore) it suddenly stopped on sony logo and it is like that till now.
I used the correct TWRP (HERE v5-twrp-l1.img)
I can enter fastboot and flash boot mode. I have uploaded various ROMs, locked the bootloader via flash tool to use Xperia Companion. It uploads the software and unfortunately it continues to loop on the logo.
Flash tool uploads correctly, but no change.
When it is connected to the charger it vibrates 1 time, turns on the logo and again
I used this topic https://forum.xda-developers.com/t/guide-recover-2012-and-newer-xperias-from-soft-brick.1849170/
Is there anyone who can help me?
facing same issue. started while back when i did factory reset while in lineage os 14.1. nothing i've tried helped. flashtool upload correctly. same with Sony Emma. after locking bootloader, even Sony Companion does everything like it should. but still loops with white Sony logo.
Using Xperia L1 G3311
Related
Hi I thought it was impossible to brick my xperia X10i since the bootloader is locked. I was experimenting with a latest MODROM and after installation tried for root permission through Z4. Then everything went wrong. Stuck on Sony logo.
I switched off the phone and then tried to repair by SEUS; didn't work.And then tried to flash through flash tool ( attached is the error msg). In both ways I'm getting error msg.
Now when I switch on my phone the sony logo comes briefly then a triangle with an exclamation mark within and the phone becomes black.
Does anyone have any ideas ?? Please help
MOD you can pls delete this thread. I tried again with SEUS repair,this time removing my microSD card and it worked
I unlocked the boot loader through the official Sony Developer site to upgrade to Android 4.4.4. Emma wouldn't let me in so I figured I should boot into recovery to do all the wiping. I held volume down and power and then my tablet stays off. Nothing to display, no LED lights, my PC won't recognize it, and just nothing. I think my tablet is bricked. Can anyone fix this?
Hi all, I need some help.
I tried to install the official CyanogenMod 13 Snapshot (2016-04-18) for my ZUK Z1. First everything went fine but after the first reboot the device ended up in a boot loop. For several hours I tried to fix this for no avail, flashing different versions of CM13, formatting the device and setting everything up again until I gave up and flashed the original CyanogenOS 12.1 from here. Now the device works again however when I want to encrypt my device through the security settings the following happens:
First I see the green Android robot, then the animated CyanogenOS logo and after a few seconds the device has booted again but no encryption was performed. I also made sure to flash the original recovery back onto my device. The only thing that has changed to before is that the bootloader is now unlocked. Could this be a problem? How can I now encrypt my device?
Thanks for any help!
Well, I locked the bootloader and it's still not working
yesterday i just locked my boot loader and then i manually restarted the device, it booted till zuk logo and then it vibrated and restated again and then it booted till zuk logo and it restated again. in every 2 sec. device is restating. i tried to shutdown the device but that is also not happening it is just restarting again and again -_- . some more issues :
1. not going into recovery mode
2.not going into fastboot mode
3.not shutting down.
4.not getting detected into pc by adb or any other driver.
5.not getting into qualcomm mode.
i just dont knw what to do i just tried every thing but the phone is restarting again and again :'(
if someone knws what could be the problem and solution then please help me.
i have the same probleme what did you do pls!!!!!
i find it thanks gooooood
http://www.androidbrick.com/lenovo-zuk-phones-qfil-roms-unbrick-guide/
Hello,
I am also facing the same problem
I am not able to open the port .
Can you say me how did you open the Qualcomm HS-USB Qdloader 9008
Help me
hello i'm facing an issue with my zuk z1. I flashed zui 2.5 rom in it through qpst and also unlocked my bootloader and flashed twrp it was just working fine, then i decided to flash the nougat firmware because i was getting some random reboots.
today i flashed a firmware(nougat) for ham and then twrp asked me for reboot i selected reboot and selected system (i usually power it off and then power it on manually) and after that it just started booting up infinite times it just shows a penguin logo for just a fraction of second and automatically reboots in just 2-3 seconds and also vibrated while rebooting
Please help me what should i do ?
Whenever I install COS 12.1, my phone went to bootloop
Phone works fine in Nougat and zui but whenever I install cos via fastboot or twrp, it went to bootloop.
Any solutions???
Also any link for Qfil COS 12.1 room?
suddenly my x compact just died in a very strange way, i have photos which i need to recover from it before i good use xperia companion to reset the phone..
tried to boot a twrp image ,but by the looks of it since my bootloader is locked ,its just says that verfication failed and reboots
recap:flashtool is saying that it failed to load file:too many links ,cant seem to understand what it is