ViperOS install failed - Samsung Galaxy Tab E Questions & Answers

Hello,
I have used Odin and twrp. I could enter in twrp settings with the combination of volume up + home + power. But viperOS rom should be corrupted. The combination of vol up home power doesn't work. I have no response of the tablet, only the mode download, and vol+ vol- power home who make the tablet off.

Related

Recovery

Is there a button combo for recovery? Or for fastboot?
thank you
I've not tried it, but i read Vol-down + power until LG splash screen, release, then Vol-down + power again

Cannot Boot to TWRP Recovery with Hardware Buttons

I flashed TWRP 2.8.7.7 Material Play with fastboot:
Code:
fastboot flash recovery recovery.img
I cannot boot to recovery by pressing the Power + Volume Up button. Any help?
I can only boot to TWRP with the advanced reboot function in CM12.1 (Power Menu>Reboot>Recovery) or using:
Code:
adb reboot recovery
Or
Code:
fastboot boot recovery.img
Another question: is the Lenovo A6000 (kraft) already has an unlocked bootloader out of the box? Thank you so much.
https://userscloud.com/a25aszfwkn2z
That's the recovery image I used, the one included in the CM12.1 thread.
Press power up then vol up and then vol down quickly one by one not at same time but quickly
Sourav_8434 said:
Press power up then vol up and then vol down quickly one by one not at same time but quickly
Click to expand...
Click to collapse
Power, volume up & volume down press and hold at the same works for me always.
press volume up n down button together then press power button till screen turn on holding all three buttons ,then release power button

[Guide][6045 & 6039] How to Boot to recovery,Download Mode and Bootloader

I get some requests from some users from XDA that they don't know how to enter to recovery,download mode or bootloader so Here's small guide
Hope That will Help
How to Boot to TWRP Recovery same for Stock Recovery
1.Turn Off your Device
2.Press and hold Volume UP ( VOL + ) key + Power Button
3.Wait to See Alcatel logo and Release Power Button
4.Continue holding Volume UP ( VOL + ) until you see the TWRP logo then release the Volume Button
How to Enter to Download Mode
1.Turn off the phone
2.Press Power Button+Volume up+Volume down key,all together)
3.Plug your Phone to PC with USB Cable..It will enter in download mode (You will get red screen with warning)
4.Long press Volume up till the screen goes black.
How to Boot to Bootloader
For Stock Recovery:
-Enter to the Stock Recovery
-Just Select Reboot to Bootloader (You can select with Vol+ or Vol-) and press Power Button to confirm
For Twrp:
-Enter to Twrp recovery
-Go to Reboot Tab
-Press Bootloader​

can't access recovery mode

when I try to boot to the recovery mode the phone doesn't start up.
when I press volume down + home + power, the phone starts up and boot to download mode, but when I press vol up + home +power the mobile doesn't start up at all
I tried to install custom recovery, it was successfully installed, but doesn't work either

TWRP without Home Button? G935FD

I want to flash TWRP on my S7 Edge with a broken home button. I can't boot immediately to recovery from download because my key combos are as follows
Download Mode - Vol Down + Home Button + Power Button
Recovery Mode - Vol Up + Home Button + Power Button
If anyone wants to know, I can go into download from system via ADB. Is there anyway for my PC to detect my phone to boot to recovery via ADB while in download?

Categories

Resources