hello after i tried many ways i finally have solve the sahara error, i can complete the process but after flash the ROM (global or CHINESE) i press the power button for 30s and the phone always says "the system has been destroyed" cant unbrick it
i tried it
and others ways
My RN7 is 6GB/64GB/48MP with global ROM
Related
Hi!
Got a problem, need to send my p9 lite to service bc it fell with me into water. it still works, but I assume a chip is frozen because neither the wifi nor bluetooth can be turned on. I'm afraid theyre not fixing my problem because I unlocked it.
I flashed twrp recovery, rooted, but already flashed the stock rom and unroot again.
When I tried to relock with adb and bootloader code, I got the error code root risk is too high
Tried to install other stock roms again and a lot of stuff, but none of it worked. So I tried to relock via dc-unlocker. com but didnt work. But now it says when I restart "your device has failed verification and may not work properly." instead of "Your device has been unlocked and can't be trusted." and when I tried to use adb to relock with the bootloader code it says "remote: stat not match" ~ got a new bootloader code??
I'm desperate, can anyone help me?
put update.app into dload folder in micro sd card and try 3 button method.
hey i have just the same problem and when i try the 3 button method i get the error software install failed.
but i have no revolution twrp any more and i think also no erecovery beacuse i cant do a factory reset when i tried to enter erecovery with power button , volume + button then i go automatic to software update and at the 5% i get the error software install failed i hope some body get a solution to fix my phone without dc-unlocker
ps i was on android nougat but i think there any os now because the phone dont boot sorry for my bad english hahah
I've been trying to update my phone to emui 5.0, every time it just says update failed. I also tried to flash custom roms through twrp, which always make my build number to something about test-keys. Maybe I'm just to dum. I wiped the system and tried again, but when booted to fastboot it says locked bootloader(it isn't what I want) so I unlocked the bootloader. Now it somehow only boots into the error mode: NO11(recovery image) and NO2(load failed).
I tried button combinations, it just keeps booting to error mode(I also read through other threads, but the solutions like waiting till the phone dies, than press volume - and connect to pc didn't work).
PLEAEAEAS Help!!!
I've recently repaired my Huawei P8 Lite after it's screen was mutilated and such and I decided to try flash a different ROM onto the device, I wiped my entire device and restarted it instead of flashing the ROM I needed to and I got led into a bootloop which presented me with the Huawei logo until the device just died from battery loss.
I was able to get myself into TWRP before the bootloop occured everytime the phone auto-restarted and I tried flashing the ROM which was Resurrection Remix V.6 and in the end near its installation I did notice it printed out two lines saying "Unknown command" and then continued to say it finished the installation succesfully but when I restarted my phone, there was nothing but the bootloop.
I ended up getting frustrated at left my phone on my desk untouched and now I'm presented with a Rescue Mode panel when I try to boot into TWRP to try and flash a stock ROM. The panel presents me with a message asking me to
Please update system again
Func NO : 11 (recovery image)
ERROR NO : 2 (load failed!)
I'm able to hold my power button and volume button up to boot into Huawei eRecovery but it's as useless as this phone currently. Please note I've tried methods involving connecting my phone to my PC and troubleshooting it from here but my PC does not recognize my phone at all, it never did whilst it was running the stock firmware either. Any help is gladly appreciated.
My phone model for anyone wondering : Huawei P8 Lite ALE-L02
Update :
I've managed to flash TWRP onto my device again after enough times battling the rescue mode, I no longer get the function errors however I have discovered a problem that runs deeper than just a few missing .img's. I've re-flashed Resurrection Remix again with gapps and no errors were presented within the installation processes, I rebooted my system and got put straight back into a boot loop. I decided to go back into recovery and to my surprise there's nothing inside my internal directory besides an empty TWRP folder.
I'm assuming that my device is not properly installing/saving the files where they need to be.
- hello people, i have a zte axon7 a2017g , stock rom oreo , i tried to flash Android 7.1 , many roms _full edl naugat and oreo to unlock bootloader because i want to develop things for it. As of now, I can't boot into phone( system), can't get into edl mode with button combination but, i can go into dfu mode and use a tool to go in edl mode. So please help me.. i have tried miflash, multidl tool, and may other tools they give me error of firehose , or sahara protocol . i have only dfu mode then i can go by sa tool of diijkuz tool automaically to edl mode , but everytime i flashed a rom told me failure , just the first time succeed but stuck on logo screen then wheni flash it told me failure .
Have you tried to completely drain the battery?
Hi friend:
If you drain the battery completely it will be easy to enter edl.
You can use edl tools to unlock the bootloader.
What I would do would be once you have the battery drained, connect the pc and flash a stock edl nougat rom.
Once flashed and started the rom, it will be easy to unlock the bootloader, put twrp and install what you want
totmakina said:
Have you tried to completely drain the battery?
Hi friend:
If you drain the battery completely it will be easy to enter edl.
You can use edl tools to unlock the bootloader.
What I would do would be once you have the battery drained, connect the pc and flash a stock edl nougat rom.
Once flashed and started the rom, it will be easy to unlock the bootloader, put twrp and install what you want
Click to expand...
Click to collapse
Thanks for your response !!!!
yes i tried with drain batteri two times but no progress , it's just on naugat rom and stuck on logo , i tried also to unloack bootloader , it told me unloacked on the edl tool but when i boot on bootloader , the state is locked , may be because the rom naugat not flash correctly , or because it'stuck on logo .
i try with naugat b12_Full edl ,oreo b02 _fulledl , , but it told me failed this time otherwise at first naugat _b12_full edl say successfully done.
now i just can make phone on dfu mode and try with the edl tool of dijkiz to go automaticlly to edl mode and flash , but it told me failed flashing .
what i should do then !!! can u recommend to me a stock rom naugat and give me a link about it , i can flash it with edl tool and how i can directly go to edl mode because now i just have dfu mode then i use a version of edl tool make me go directly to edl mode but may be it's not work fine !!!
Ps : My problem is that am stuck on logo after downgrading from stock rom oreo b02 to naugat , shoyuld i search about a boot recovery to flash boot and boot in system or if ther is another tools or rom can i use them to solve my problem
(' sorry for my bad english )
Previously I bricked my Redmi 7A, was (still tryin to) unbrick the device. Had no success when a hope of EDL mode flashed before my eyes. Tried it to do, got an error
The error - "cannot receive hello packets"
Hope I get some little help to unbrick it
Don't waste your time, as I told you, the result will be:
https://www.droidwin.com/wp-content/uploads/2020/08/account-unauthorized.png​
which software did give you that error? MI Flash tool? the EDL tool?