Currently have the Android 10 Q AOSP from the Russian page 4da booted and running far better than I could get stock to work with TWRP and Magisk. I'll try to get it backed up and put a link to it a little later if anyone is interested. I am in Mexico and definitely don't have a Russian phone. So I'm assuming this ROM works across all devices of the same model. No issues with dm verity on the ROM or in TWRP. Only Magisk module I've had an issue with not running is the new VIPER4Android 2.7.X.X.
Related
Hey all,first of all thank you everyone who has worked on this device it is super appreciated. I hope Im posting this question in the right spot but I was wondering if anyone has a LG K20 plus/T-Mobile and has sucessfully installed Viper or Xposed Framework? Its been a few years since I owned an LG or installed these on a device of mine so if anyone has could you briefly run the steps by me mainly for Viper (I did go to the Viper forum on here but still had no luck installing on Nougat) not Xposed.Thanks again everyone for your time!!!
I'm running aicp rom and installed xposed and v4a with no problem. Think the trick was that I had to install busybox in system/xbin. Pretty sure it worked on stock as well.
Anyway Gluck.
Edit: I should mention I have the metro variant (mp260). But it doesn't seem to matter.
awesome ill do that thanks!
stovo06 said:
I'm running aicp rom and installed xposed and v4a with no problem. Think the trick was that I had to install busybox in system/xbin. Pretty sure it worked on stock as well.
Anyway Gluck.
Click to expand...
Click to collapse
Which xposed did you flash?
Medfordite said:
Which xposed did you flash?
Click to expand...
Click to collapse
With the 32 bit ROM, v89 arm SDK 25.
If you install xposed 3.1.5 apk in this post, go to the framework option and choose install through recovery, it wil install the correct framework for you.
https://forum.xda-developers.com/showpost.php?p=58828974&postcount=1
After reboot it's all good
Thanks! Viper is running ,and it's been awhile, has a whole new look and is great on this device! I appreciate the Xposed help,tried once to no avail, so im grateful for the direction I need to go! Great forum! Thanks all!
I can get viper no problem,but Xposed I only can install framework,but first reboot after ANY module and bootloop.magisk modules work though
First post ever anywhere.
I am looking to install xposed on stock rom 7.0
Things i have tried:
Fresh install through twrp v89 sdk 24 (and all other official versions i could find)
Fresh install purify os xposed through twrp
Froze all lg related apps and tried both of the above again
Each time after reboot k20 freezes at metro screen. (Waited over an hour)
I reinstalled stock firmware through lg up before trying each of the above.
Cache and dalvik cache cleared each time
Lg k20 plus
Android 7.0
Security patch feb 1 2018
Kernal version 3.18.31
Build # nrd90u
Software version mp26010x
Any help is greatly appreciated
Same problem with rooted stock mp260. Something LG did to Android is obviously at fault here since it works for other devices just fine. If I had the time I'd try my hand at hunting the problem down, but I can't.
i have a verizon galaxy note 4 i haven't used in ages that i need to start using again and i wanted to go to stock rooted and clean up some bloat. what is a good way to do this?
thanks!
some more details
The phone is currently running EmotionOS 7.1.1 and 2CPL1
i decided to stay with custom roms:
upped to twrp 3.2.1, wiped memory, odin to CQL1, twrp installed RR and open gapps.
anyone know a rom that has working miracast to windows 10 or any OS?
I have been test LOS 14.1 and it works okay but a little unstable. Seems like the best I can get on this phone will be as close to stock as possible. I had it working well enough but I wanted to root the device.
So I would like to know what combination of bootloader and firmware/Rom will give me
unlocked bootloader
Twrp
Stock MM
Root
Best cell performance
Thanks in advance
Hello folks,
Since most roms come with Gapps separately, I have a problem trying to use the Dual Boot Patcher, because when use it, can´t install roms on tradictional way, no boots, so have to decide between a rom with included Gapps (have just found two 9 pie that works), or without Gapps.
I´m trying to get a Rom 8.1 android version or earlier because I feel the Pie feels more heavy to run app I need, while 8.1 seems smooth. But I should like to get it with gapps to avoid being restarting the phone all the time. So,
Anyone know a rom for I9505 android 8.1 version or earlier with included Gapps? or
does anyone have experience with the dual boot patcher app installed a Rom+gapps? If I do (even patching all ok) if install Gaps doesnt boot, so I guess may there is a folder name difference or something I´m missing..
thank you in advance.
Why do you need the dual boot patcher thingy?
Much simpler and safer to TWRP and single ROM install.
No problem installing GAPPS, no stability issues with phone restarts. Too easy.
One solution is to go down to the kitchen section of the forum and learn how to slipstream the gaps into the rom.
Hi, have you tried LOS 17.1 by JDC team ? It is awesome and Dark mode brings so much battery life.
https://forum.xda-developers.com/ga...y-s4-i9505-t3517706/post70049958#post70049958
hello, as title say i've got the tab a 10.1 2016 , lte version. i would like to install lineageos 18 (android 11) on this device, because it still work good and overall performance it's still good (not with the stock one, very slow). i tried this with twrp 3.5.0 (latest version), it flashes the img file, but it wont run and goes bootloop. then i flashed the modified twrp 3.2.3 for treble, flashed the treble.zip and the img file of lineageos (i seeked for a-only and 64bit version), but it ends in bootloop. so what's wrong with it? i noticed that only lineageos 16 gsi or other 9.0 roms run fine, going on android 10 gsi it wont be recognized. there's a way to get the android 11 gsi working on this device? it should be compatible, as from oreo it should be supported with treble project.
Hi. I am new to flashing but is it possible you have to upgrade the bootloader first in order to be able to upgrade to lineageOS 18 (android 11)? Just according to my understanding from that thread. if you have older bootloader then it wont work. But i am new so i might be wrong and totally off
i think that it doesn't depend on the bootloader, but the recovery hasn't been updated anymore by the developer. he might have lost interest in the device, so that stopped building roms too. the tablet was not that bad, but for my experience, too much slow and the battery didn't last so much. for these reasons i gave up and ended in selling it, replaced with the sm-t500 (tab a7 2020). waaay better tablet, now waiting for someone who unlocks this little beast and builds a custom recovery or rom.
Hi,
Its been a long time since I last rommed any phone. Last Was my beloved 'Bacon' (Oneplus One) which I rommed till it died.
I am trying to install a custom rom on my wife's Mi A1. Have a few questions.
Which is the most stable rom (Android 11 preferred but if android 11 isn't stable then android 10 will do). Trying to replace the boring stock rom with some much needed features. but don't need a super tweaked up rom. Stability is most important. : edit: installed lineage 18.1.
Can I directly flash TWRP 3.6.0_9-0-tissot over stock? As with Bacon, I needed to flash One recovery then another to get a version jump. like I cant directly flash twrp 3.x over stock. I needed to flash TWRP 2.xy and then 3.0. (example, not real version numbers.)
I don't need root. But I do need the device to pass SafetyNet as I need it to operate apps like Gpay (which does not work if device fails SafetyNet).
Can I re lock the bootloader after flashing TWRP? Would it help with SafetyNet situation?
OpenGapps still good?
xeltos said:
Hi,
Its been a long time since I last rommed any phone. Last Was my beloved 'Bacon' (Oneplus One) which I rommed till it died.
I am trying to install a custom rom on my wife's Mi A1. Have a few questions.
Which is the most stable rom (Android 11 preferred but if android 11 isn't stable then android 10 will do). Trying to replace the boring stock rom with some much needed features. but don't need a super tweaked up rom. Stability is most important.
Can I directly flash TWRP 3.6.0_9-0-tissot over stock? As with Bacon, I needed to flash One recovery then another to get a version jump. like I cant directly flash twrp 3.x over stock. I needed to flash TWRP 2.xy and then 3.0. (example, not real version numbers.)
I don't need root. But I do need the device to pass SafetyNet as I need it to operate apps like Gpay (which does not work if device fails SafetyNet).
Can I re lock the bootloader after flashing TWRP? Would it help with SafetyNet situation?
OpenGapps still good?
Click to expand...
Click to collapse
1. There are plenty of stable roms, you can look at Xiaomi Mi A1 ROMs section to check them.
2. You can directly flash TWRP on stock rom.
3. ?
4. No
5. I use roms with pre-installed GApps for stablity.
mahyarmo said:
1. There are plenty of stable roms, you can look at Xiaomi Mi A1 ROMs section to check them.
2. You can directly flash TWRP on stock rom.
3. ?
4. No
5. I use roms with pre-installed GApps for stablity.
Click to expand...
Click to collapse
Installed lineage 18.1 with opengapps micro.