Update 230526: Correct numbering of "B.1.1 Simple" to "B.1.2 Simple", use "OOS 13+" instead of "OOS 13" as OOS 13.1 is now available
A. First time rooting
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This process is common across all options
A.1 Flashing Magisk patched boot imageThere are two ways to sourcing a copy of the stock boot image (other than using TWRP - See A.2).
Using the MSM Tool readback option to pull a copy of the current boot image from the phone
Using Payload Dumper and a full update zip
A.1.1 Using MSM Tool ReadBackThe MSM Tool has a feature (ReadBack) that allows it to pull copies of partitions from a phone when it is connected in EDL mode to a PC.
This means that you can pull a copy of your currently running stock boot image directly from the (unrooted) phone and you are not dependent on having access to a full rom installation zip.
A big thanks to @scottlam1 for this information (see https://forum.xda-developers.com/t/oxygenos-a12-breaks-rooting.4456251/post-87067419 and following). You can get a copy of the MSM Tool from @Some_Random_Username's https://forum.xda-developers.com/t/...ol-to-restore-your-device-to-oxygenos.4180837. I used the one for OOS 11.0.7.9 for KB05AA when testing this process.
Find your current slot by connecting your phone to your PC and running adb shell getprop ro.boot.slot_suffix Note: on OOS 12 when you connect the phone to the PC you must enable "Transfer files" on the phone for ADB to see the device.
Start MsmDownloadTool V4.0.exe
Select User type: Others and click Next
Press F8
Select the appropriate boot partition (boot_a or boot_b based on the getprop result). Note: do NOT select both boot_a and boot_b because ReadBack will only produce one boot.img file and the _b extract will overwrite the _a extracted file.
Enter the password: oneplus and then press OK. You should now see a ReadBack button underneath the Target dropdown list.
Reboot the phone into EDL mode using adb reboot edl . When you see it connected to the MSM Tool - it will show an entry with COM3 (for example) - click on the ReadBack button.
Warning: Do NOT click on the Start button as this will start the installation process and reset your phone.
MSM will show "ReadBack Complete" (in green) when it has copied the boot image and power off the phone. Close the MSM tool.
Disconnect the phone from the PC, turn on your phone, reconnect it to the PC, and copy the boot image (it's in C:\boot.img) to your phone.
The rest of the process is the same as that in section A.1.2 below, but starting from step 6 in @DroidFreak32's guide as you already have the boot image.
A.1.2 Using Payload DumperNotes:
This can ONLY be used on full update zips, NOT on incremental updates.
Note: if you use @mslezak's Payload Dumper (see https://forum.xda-developers.com/t/...urrently-op8t-11-0-9-9-kb05aa-posted.4314677/ then you may be able to use it on incremental updates. I personally have not done this.
Follow the instructions detailed in @DroidFreak32's https://forum.xda-developers.com/t/...national-kb2000-kb2001-kb2003-kb2005.4178675/ paying attention to:
You can use the latest stable version of Magisk (my recommendation as of June 2022)
Do NOT use the "To flash" option in step 11 because this causes issues when you get the next OTA update. Use the the "To Temporarily boot into a rooted system (RECOMMENDED!!)" option.
Backup both the stock boot and Magisk patched boot images if you are going to use CLI
I also recommend that on OOS you install @Displax's Universal SafetyNet Fix Magisk MOD module v2.4.0 or later to pass Play Integrity with an unlocked bootloader (https://forum.xda-developers.com/t/module-mod-universal-safetynet-fix.4553699/).
A.2 Using TWRP or Orange FoxI will use TWRP throughout the document to mean TWRP or Orange Fox unless indicated otherwise.
I use the TWRP installer zip to create an installer for Orange Fox by replacing the recovery.img file in the TWRP installer zip with the Orange Fox recovery image (the file has to be named recovery.img). The advantage of this is that you can then flash the recovery zip in recovery as well as in Magisk (install it as a module). And the installer zip will flash recovery to both slots.
Notes:
on OOS 11 use TWRP 11 from https://dl.twrp.me/kebab/
on OOS 12 use the WIP TWRP 12 version from https://forum.xda-developers.com/t/...roject-8t-9r-2022-07-27.4473983/post-87271673 or Orange Fox from https://forum.xda-developers.com/t/...ry-project-oneplus-8t-9r-22-nov-2022.4391139/
on OOS 13 use Orange Fox for OOS 13 from https://forum.xda-developers.com/t/...ry-project-oneplus-8t-9r-22-nov-2022.4391139/ or @apophis9283's version of TWRP from https://forum.xda-developers.com/t/recovery-unofficial-twrp-oneplus-8t-oos13-1-19-23.4541965/
Boot bootloader
fastboot boot <twrp.img>
(optional - see next item) Backup current boot
Install Magisk-*.apk and note that Magisk will create a backup of the current stock boot (see section C)
Install @Displax's Universal SafetyNet Fix Magisk MOD module v2.4.0 or later to pass Play Integrity with an unlocked bootloader (https://forum.xda-developers.com/t/module-mod-universal-safetynet-fix.4553699/)
Reboot system
Uninstall Magisk stub
Install Magisk-*.apk and in Magisk>Settings enable both Zygisk and Enforce DenyList
Reboot system
A.2.1 Keep TWRPIf you want to keep TWRP installed then the process is very similar to that described for Magisk. The difference is that this time we backup recovery and install TWRP. You can merge the Magisk process with the TWRP process by: Backing up current boot and recovery; Installing both the Magisk-*.apk and the TWRP installer zip.
Here's the process for just TWRP:
Boot bootloader
fastboot boot <twrp.img>
Backup current recovery
Note: the TWRP backups of physical partitions (like boot and recovery and so on) are actually image dumps. You could rename the files from *.emmc.win to *.img and install them using TWRP or other methods.
Install TWRP installer zip
Reboot system
B. Keeping root during an update
B.1 System Update downloads and installs the updateThis is using the built-in System Update tool, which you'll find in:
OOS 11: Settings>System settings> System Update
OOS 12 and higher: Settings>About device>Software update
The process is complicated because you cannot use Magisk>Magisk Install>"Install to inactive slot" as this will fail on OOS 11 (for incremental updates) and OOS 12 (for all updates, including the initial update from OOS 11 to OOS 12).
But testing on OOS 13 (updating from F.62 to F.63 on KB2003 and KB2005) shows that you can now use "Install to inactive slot" and, therefore, the simpler B.1.2 process can be used with System Updater for both incremental and full OTA updates. However this needs more testing (by adventurous IN users).
B.1.1 SafeThe following process is safe to use on all versions and types of OTA updates. It is courtesy of @osm0sis in https://forum.xda-developers.com/t/...ices-platforms.2239421/page-149#post-84764713 and @rage302 in https://forum.xda-developers.com/t/...ing-root-options.4387977/page-4#post-86830285.
If you have TWRP installed then reboot recovery, restore the stock OOS recovery (you would/should have taken a copy of it when you installed TWRP as mentioned in A.2.1), and reboot system. Without doing this, an incremental OTA will fail when it checks for the stock recovery.
Restore the current stock boot image using Magisk>Uninstall Magisk>"Restore images" and DO NOT reboot
Download and Install the update (and DO NOT reboot) using:
OOS 11: Settings>System Settings>System Update>Download and Install
OOS 12 and higher: Settings>About device>Software update
Copy the updated boot image as follows:
On PC:Find the inactive slot suffix:
adb shell getprop ro.boot.slot_suffix Note: on OOS 12 when you connect the phone to the PC you must enable "Transfer files" on the phone for ADB to see the device.
If the result is _a then the inactive slot suffix is _b otherwise it is _a
Take a copy of the inactive slot boot image: adb shell su -c dd if=/dev/block/by-name/boot<inactive slot suffix> of=/sdcard/oos-ota-boot.img replacing <inactive slot suffix> with the value you previously determined (_a or _b). Note: Magisk may prompt you (on your phone) to grant root access to Shell - grant it.
On phone: Patch the dumped oos-ota-boot.img using Magisk>Magisk Install>"Select and Patch a File"
Copy /sdcard/Download/magisk_patched*.img to your PC
Restore root to the current slot using Magisk>Magisk Install>"Direct Install (Recommended)". This is so you keep root in case the update somehow fails and you're returned to the current system.
Turn on Airplane Mode to prevent Google Play Services detecting that the phone is bootloader unlocked and making your phone uncertified in Google Play.
Reboot the phone from the System Update dialog; verify that you are now running the updated version
On PC: Reboot to bootloader using adb reboot bootloader
Boot (NOT flash) the patched boot image: fastboot boot <magisk-patched image> where <magisk-patched image> is the patched image you transferred to the PC
On phone: Verify that Magisk shows you are rooted
Make rooting permanent using Magisk>Magisk Install>"Direct Install (Recommended)" and reboot again
Turn off Airplane Mode
B.1.2 SimpleThe following process is the simplest update method, but is limited to:
OOS 11 full image OTAs only
OOS 13+ full image OTAs and, starting with C.62, incremental OTAs (confirmed for KB2003 and KB2005)
If you have TWRP installed then reboot recovery, restore the stock OOS recovery (you would/should have taken a copy of it when you installed TWRP as mentioned in A.2.1), and reboot system. Without doing this, an incremental OTA will fail when it checks for the stock recovery.
Restore the current stock boot image using Magisk>Uninstall Magisk>"Restore images" and DO NOT reboot
Download and Install the update (and DO NOT reboot) using:
OOS 11: Settings>System Settings>System Update>Download and Install
OOS 13+: Settings>About device>Software update
Note that the OOS 13+ EU/IN local installer will first extract the update (and update the inactive slot partitions) and then prompt you to Install it and it is IMPERATIVE that you DON'T CLICK on Install at this point as it will finish the installation and reboot without prompting, leaving you without root.
Restore root to the current slot using Magisk>Magisk Install>"Direct Install (Recommended)". This is so you keep root in case the update somehow fails and you're returned to the current system.
Root the updated boot image using Magisk>Magisk Install>"Install to inactive slot"
Note: if you accidentally reboot from Magisk at this point and end up in a bootloop (EU and IN), see: https://forum.xda-developers.com/t/guide-root-and-keeping-root-options.4387977/page-17#post-88204853
On OOS 13+ EU and IN now tap on Install in the local updater process and on NA tap Reboot; on OOS 11 reboot.
To re-install TWRP, follow the process in A.2.1
B.2 Manual InstallThis involves manually downloading the update zip and then installing it using one of the following options.
It is up to you to download the update (from whichever source you use).
How to get a copy of the update zip
The simplest option is to use Oxygen Updater (https://play.google.com/store/apps/details?id=com.arjanvlek.oxygenupdater).
It is also possible to get a copy of the update zip if the OOS 13+ System Updater is showing that an update is available and the installation button is showing "Extract".
You'll find the installation zip (named my_manifest_*_patch.zip or my_manifest_*_all.zip for incremental or full OTA) in /data/ota_package/OTA/.otaPackage.
B.2.1 Local InstallThis is using:
OOS 11: System Update>Gear icon (local install)
OOS 12: MyApplication2 app (source: https://oxygenos.oneplus.net/English_20220225101104.apk; see https://forums.oneplus.com/threads/oxygenos-12-for-the-oneplus-8t.1555060/)
OOS 13+: On EU and IN Settings>About device>Software update>3-dot menu>Local install; on NA: same as for OOS 12
Note: If the Local install option is greyed out because the System Updater is showing that an update is available, then you can still use Local install by:
Turn on Airplane mode to prevent the System Updater finding the update again after the next step.
Go to Settings>Apps>App Management>3-dot menu>Show system and clear storage from Software update
If you have TWRP installed then reboot recovery, restore the stock OOS recovery (you would/should have taken a copy of it when you installed TWRP as mentioned in A.2.1), and reboot system. Without doing this, an incremental OTA will fail when it checks for the stock recovery.
Move the update zip to /sdcard (NOT a subdirectory of /sdcard).
Magisk>Uninstall Magisk>Restore images - this restores the stock boot image whilst keeping Magisk.
Install the update using the appropriate local installer for your version of OOS and DO NOT reboot.
Note that the OOS 13+ EU/IN local installer will first extract the update (and update the inactive slot partitions) and then prompt you to Install it and it is IMPERATIVE that you DON'T CLICK on Install at this point as it will finish the installation and reboot without prompting, leaving you without root.
Restore root to the current slot using Magisk>Magisk Install>"Direct Install (Recommended)". This is so you keep root in case the update somehow fails and you're returned to the current system.
Root the updated boot image using Magisk>Magisk Install>"Install to inactive slot"
Note: if you accidentally reboot from Magisk at this point and end up in a bootloop (EU and IN), see: https://forum.xda-developers.com/t/guide-root-and-keeping-root-options.4387977/page-17#post-88204853
On OOS 13+ EU and IN now tap on Install in the local updater process and on NA tap Reboot; on OOS 11 and 12 reboot.
To re-install TWRP, follow the process in A.2.1
B.2.2 Using CLICLI (command line interface) tools, such as Terminal (I use Termux from https://f-droid.org/en/packages/com.termux/) or ADB shell, allows you to manually download delta updates avoiding the need to wait for full updates or for someone to post a copy of the delta update zip.
If you use Terminal then you can install updates without the need of a PC (my preferred option).
Using line commands, at one level, can simplify some processes by avoiding the need to switch out to recovery and back again. On the other hand, they complicate things by requiring knowledge of how to use them.
The commands you need to be familiar with are:
dd to read-from/write-to the partitions in /dev/block/by-name
grep to scan the output of a logcat
getprop to find out which are the active/inactive slots
logcat to read the Android logs
su to run commands as root
Get a copy of the update zip
Note: I'm running the NA version of OOS. If the URL below for the OTA is different for other OOS versions, please let me know via a PM.
Once the phone tells me that there's an update available I do the following in Termux:
su -c "logcat -d" | grep -Eo "https://android.googleapis.com/packages/ota-api/package/[a-z0-9]*.zip"
This looks for the the Google OTA server file name in logcat and returns the source address. For example, the KB2005 C.11 incremental update was https://android.googleapis.com/packages/ota-api/package/435fc808f603bbc8a63ce30fd944676a65a61d6f.zip
Note: You should run these commands as soon as you get a notification that you have the update. If you leave it too long then the log file will roll over and you won't be able find the url.
wget -O /sdcard/oos-ota-update.zip <source address>
This pulls a copy of the file to /sdcard
Note: You could also just paste the URL into a browser to download the file
Find the active slot suffix: getprop ro.boot.slot_suffix
If the result is _a then the inactive slot suffix is _b otherwise it is _a
Restore active slot stock boot/recovery (recovery: only if TWRP is installed) using dd if=<copy of stock boot/recovery> of=/dev/block/by-name/<boot/recovery><active slot suffix>
Note: you could also use Magisk to restore the stock boot using Magisk>Uninstall Magisk>Restore images - this restores the stock boot image whilst keeping Magisk
Install the update using the appropriate local installer for your version of OOS and DO NOT reboot
Note that the OOS 13+ EU/IN local installer will first extract the update (and update the inactive slot partitions) and then prompt you to Install it. It is IMPERATIVE that you DON'T CLICK on Install at this point as it will finish the installation and reboot without prompting leaving you without root.
The local installer is:
OOS 11: System Update>Gear icon (local install)
OOS 12: MyApplication2 app (source: https://oxygenos.oneplus.net/English_20220225101104.apk; see https://forums.oneplus.com/threads/oxygenos-12-for-the-oneplus-8t.1555060/)
OOS 13+: On EU and IN Settings>About device>Software update>3-dot menu>Local install; to be advised on NA
Backup the new inactive slot stock boot/recovery (recovery: only if TWRP is installed) using dd if=/dev/block/by-name/<boot/recovery><inactive slot suffix> of=<new boot/recovery img>
Restore root to the current active slot dd if=<copy of current Magisk patched stock boot/recovery> of=/dev/block/by-name/<boot/recovery><active slot suffix>. This is so you keep root in case the update somehow fails and you're returned to the current system.
Note: You could also use Magisk>Magisk Install>"Direct Install (Recommended)"
(ONLY if keeping TWRP) Magisk>Modules>Install from storage: Select <twrp-installer.zip>
Magisk>Magisk Install>"Install to inactive slot" and DO NOT reboot
Backup the new Magisk patched stock boot using dd if=/dev/block/by-name/<boot><inactive slot suffix> of=<new Magisk patched boot img>
On OOS 11 and 12: Reboot. On OOS 13+ now tap on Install in the local installer to finish the installation.
C. A note on Magisk backup folders in /dataWhen Magisk patches a stock boot image using either Magisk>Magisk Install>"Direct Install (Recommended)", Magisk>Magisk Install>"Install to inactive slot", or is installed in TWRP, then it creates a backup of the stock boot image in a directory named /data/magisk_backup_<SHA1 of stock image>.
When you use Magisk>Uninstall Magisk>Restore images the backup corresponding to the current patched boot image is used to restore the stock image to the current (active) slot.
Clearly, if you deleted these magisk_backup directories then Magisk will not be able to restore the stock boot image. You must, therefore, always keep the current backup.
If you don't delete these backups you can end up with a lot of obsolete backups. So, how to work out which one is the one you need to keep?
The simplest way is to:
Restore the current stock boot image using Magisk>Uninstall Magisk>Restore images
Delete all the /data/magisk_backup_* directories
Restore the rooted boot image using Magisk>Magisk Install>"Direct Install (Recommended)" - this also creates a new magisk_backup directory (no need to reboot)
Great write up. I know some people will appreciate the info when they have that "freak out moment" and something goes slightly wrong.
My question/suggestion would be in regards to your A.2 step. But please, if both options work, my post can be ignored. As you and I discussed in another thread, the update process via TWRP while keeping root has always been, on previous OnePlus Android OS versions.
Download full ROM zip from OnePlus or other available location. I.E. 11.0.12.12
Create Nandroid backup.
Install full ROM zip.
Install TWRP.
Reboot to recovery.
Install Magisk.
Reboot to system.
Assuming it's a full update and not a delta. You outlined...
Manually download the update (from whichever source you use)
Boot recovery
Restore the stock boot and recovery that you backed up previously
Install the update
Boot bootloader
fastboot boot <twrp.img>
Backup current boot and recovery
Install Magisk-*.apk
Install twrp-installer.zip
Reboot system
As you stated, if full update, skip steps 3, 5, 6. Does changing the order and installing Magisk before TWRP allow you to not install TWRP 2x in order to keep the recovery and preserve root?
I used my outlined steps to update to 11.0.12.12 and it worked perfectly. Sorry if this post seems out of sorts, I'm doing it from my phone.
The Apostle said:
Great write up. I know some people will appreciate the info when they have that "freak out moment" and something goes slightly wrong.
My question/suggestion would be in regards to your A.2 step. But please, if both options work, my post can be ignored. As you and I discussed in another thread, the update process via TWRP while keeping root has always been, on previous OnePlus Android OS versions.
Download full ROM zip from OnePlus or other available location. I.E. 11.0.12.12
Create Nandroid backup.
Install full ROM zip.
Install TWRP.
Reboot to recovery.
Install Magisk.
Reboot to system.
Assuming it's a full update and not a delta. You outlined...
Manually download the update (from whichever source you use)
Boot recovery
Restore the stock boot and recovery that you backed up previously
Install the update
Boot bootloader
fastboot boot <twrp.img>
Backup current boot and recovery
Install Magisk-*.apk
Install twrp-installer.zip
Reboot system
As you stated, if full update, skip steps 3, 5, 6. Does changing the order and installing Magisk before TWRP allow you to not install TWRP 2x in order to keep the recovery and preserve root?
I used my outlined steps to update to 11.0.12.12 and it worked perfectly. Sorry if this post seems out of sorts, I'm doing it from my phone.
Click to expand...
Click to collapse
The problem is that delta updates require you to restore both recovery and boot partitions to stock otherwise the installation fails.
The process I describe works for both full and delta updates. But, like I said, if you know that the update is a full OTA, then you can simplify the process and, <edit>if you know it's always going to be a full update, then<end-edit> you can use your "usual" process.
PS: this is a source of confusion because the BA ROMs are always full updates, while the AA ROMs are typically delta updates.
So what works for one user will not work for another even though they are both running OOS on an 8T.
And then there's the difference between letting System update download and install versus manual install, which creates another place for confusion is you just talk about "install update" instead of being specific as to the exact method.
BillGoss said:
The problem is that delta updates require you to restore both recovery and boot partitions to stock otherwise the installation fails.
The process I describe works for both full and delta updates. But, like I said, if you know that the update is a full OTA, then you can simplify the process as per your "usual" process.
Click to expand...
Click to collapse
I guess I don't know why people wouldn't simplify the process, download the full ROM, and eliminate steps. It's worked for years on OnePlus devices across android 9, 10, and now 11.
The Apostle said:
I guess I don't know why people wouldn't simplify the process, download the full ROM, and eliminate steps. It's worked for years on OnePlus devices across android 9, 10, and now 11.
Click to expand...
Click to collapse
Because there's often no AA full rom to download. They can take months to show up while the delta is available immediately from Google.
I've never had that issue. Between XDA and OnePlus forums, someone has always posted a host link... Since OnePlus stopped around October.
Regardless, good info you posted.
The Apostle said:
I've never had that issue. Between XDA and OnePlus forums, someone has always posted a host link... Since OnePlus stopped around October.
Regardless, good info you posted.
Click to expand...
Click to collapse
Thanks. By the way I edited my first reply to you because your "usual" process only works if you are always using full updates.
Hi!
I'm using this method for the update:
Without TWRP
Manually download the update (from whichever source you use) to /sdcard
Magisk>Uninstall Magisk>Restore images - this restores the stock boot image whilst keeping Magisk
Install the update in System Update>Gear icon (local install)
Magisk>Magisk Install>Install to inactive slot
Reboot system
2nd point, if I tap on uninstall magisk, It tells me that I don't have a backup original boot image, how can I proced?
Thanks
Feduz said:
Hi!
I'm using this method for the update:
Without TWRP
Manually download the update (from whichever source you use) to /sdcard
Magisk>Uninstall Magisk>Restore images - this restores the stock boot image whilst keeping Magisk
Install the update in System Update>Gear icon (local install)
Magisk>Magisk Install>Install to inactive slot
Reboot system
2nd point, if I tap on uninstall magisk, It tells me that I don't have a backup original boot image, how can I proced?
Thanks
Click to expand...
Click to collapse
You can't proceed if your update is an incremental update. Otherwise you can go ahead.
You'll need to find a copy of the stock boot image to restore it before installing the incremental update.
BillGoss said:
You can't proceed if your update is an incremental update. Otherwise you can go ahead.
You'll need to find a copy of the stock boot image to restore it before installing the incremental update.
Click to expand...
Click to collapse
I'm on 11.0.11.11KB05BA, to 11.0.12.12. so I need to flash the original boot image via ADB/fastboot? Then proceed with point 3?
Feduz said:
I'm on 11.0.11.11KB05BA, to 11.0.12.12. so I need to flash the original boot image via ADB/fastboot? Then proceed with point 3?
Click to expand...
Click to collapse
You tell me. I use AA, not BA. If you don't know what type of update it is, then you need to replace stock using whatever method you like.
BillGoss said:
You tell me. I use AA, not BA. If you don't know what type of update it is, then you need to replace stock using whatever method you like.
Click to expand...
Click to collapse
It's a full update, about 2.8 GB. I'll flash the stock boot.img so
Feduz said:
It's a full update, about 2.8 GB. I'll flash the stock boot.img so
Click to expand...
Click to collapse
if it is a full update you don't need to restore anything before installing it.
Qnorsten said:
if it is a full update you don't need to restore anything before installing it.
Click to expand...
Click to collapse
Correct, I skipped this part in the first post. I've done the update and then installed via magisk. All went good. Thanks
What should I backup using TWRP before a custom rom update and before a jump from a custom rom to another?
rmroot said:
What should I backup using TWRP before a custom rom update and before a jump from a custom rom to another?
Click to expand...
Click to collapse
Read the TWRP OP posts for the answer.
[CLOSED] [No longer maintained] [RECOVERY] [11] [OFFICIAL] TeamWin Recovery Project (8T / Kebab) (2022-03-09)
Introduction: Team Win Recovery Project or TWRP for short, is a custom recovery built with ease of use and customization in mind. We started from the ground up by taking AOSP recovery and loading it with the standard recovery options, then added...
forum.xda-developers.com
@BillGoss
I will be a user of an OP 9R in a few days and I saw that it shares the same version of TWRP.
In the 9r forum I still haven't found a well explained tutorial and if it's possible.
The instructions you put here allow you to update OxygenOS on 8T and keep root/TWRP, right? Would they be applicable to the 9R as well?
lvints said:
@BillGoss
I will be a user of an OP 9R in a few days and I saw that it shares the same version of TWRP.
In the 9r forum I still haven't found a well explained tutorial and if it's possible.
The instructions you put here allow you to update OxygenOS on 8T and keep root/TWRP, right? Would they be applicable to the 9R as well?
Click to expand...
Click to collapse
I know that the 8T and 9R share similar architecture so the process I've described may work on the 9R, but I can't confirm this.
I do know that as one point we had a common TWRP version for both the 8T and 9R, but that's no longer the case and there's no official TWRP for the 9R.
So, from my perspective, you're on your own on this. If it works, great. You may want to post your process and results in the 9R forum, but not here (this is strictly an 8T forum and thread).
Thanks very much for this thread, @BillGoss. Just easily upgraded 11.0.12.12.KB05AA to 11.0.13.13.KB05AA with your methods using fastboot boot trwp.xx.img from bootloader mode and simply reinstalling Magisk after letting the update run (airplane mode on, as you suggest). I had just upgraded Magisk before the update, so had the latest apk handy in my downloads.
To backup your boot in TWRP (first know your active slot), you can get to a terminal in the TWRP/Advanced menu. I use the same commands you list in your "Use a CLI" instructions.
Hi, I've updated correctly to the latest OOS, should I need to update Magisk? or will be fine this version?
Related
I am having issues getting an OTA with Magisk 15.2 installed. MAgisk Manager is 5.5.3.
1. I did a flash of fastboot rom for the first december update of 7.1.2 without overwriting storage.
2. I unlocked the bootloader
3. I booted (did not flash) to 3.1.1 of TWRP and loaded Magisk 15.2. Everything worked fine.
4. I followed this guide https://github.com/topjohnwu/Magisk/blob/master/docs/tips.md#ota-installation-tips and went Magisk Manager → Uninstall → Restore Stock Boot. I received a confirmation that the stock boot was restored. However, at this point, my google camera still works. This seems illogical if the stock boot is replaced.
5. When I download the second december OTA update I get a failure to install error at step 2 of 2.
Has anyone had similar issues or have solution? If I post to the Magisk threads, what logs will they require and how specifically must I create the logs and where will they be stored?
I didn't get a reply here. Mod, please delete this post. I will add it at Magisk thread.
Oh, wow. I have also installed magisk in the way you have. I hope it hasn't messed with your system. However I'm fully updated so have no way of trying your method of OTA.
Please update me if you do solve your issue incase I also have similar difficulties.
It is no major issue, it is just a pain in the butt to have to flash the fastboot rom to update... It take 15 minutes and a PC if you can't get OTA...
I'm just lazy.
ludditefornow said:
I am having issues getting an OTA with Magisk 15.2 installed. MAgisk Manager is 5.5.3.
1. I did a flash of fastboot rom for the first december update of 7.1.2 without overwriting storage.
2. I unlocked the bootloader
3. I booted (did not flash) to 3.1.1 of TWRP and loaded Magisk 15.2. Everything worked fine.
4. I followed this guide https://github.com/topjohnwu/Magisk/blob/master/docs/tips.md#ota-installation-tips and went Magisk Manager → Uninstall → Restore Stock Boot. I received a confirmation that the stock boot was restored. However, at this point, my google camera still works. This seems illogical if the stock boot is replaced.
5. When I download the second december OTA update I get a failure to install error at step 2 of 2.
Has anyone had similar issues or have solution? If I post to the Magisk threads, what logs will they require and how specifically must I create the logs and where will they be stored?
Click to expand...
Click to collapse
4. restore boot image function will reflash stock boot.img to boot partition, but until reboot you are still using patched_boot.img which is loaded in memory. So you will not lose root access and all Magisk modules work (until reboot).
5. failed update could be due to tampered system partition (it is enough to mount it as RW in TWRP). Reflash fastboot images without data erase and do not modify system in any way afterwards.
_mysiak_ said:
4. restore boot image function will reflash stock boot.img to boot partition, but until reboot you are still using patched_boot.img which is loaded in memory. So you will not lose root access and all Magisk modules work (until reboot)
Click to expand...
Click to collapse
Thanks for the detailed reply.. this is the thing that confuses me. The Magical guide clear states to not reboot the phone after uninstalling the patched boot.. so how can the ota possibly pass?
ludditefornow said:
Thanks for the detailed reply.. this is the thing that confuses me. The Magical guide clear states to not reboot the phone after uninstalling the patched boot.. so how can the ota possibly pass?
Click to expand...
Click to collapse
OTA updater verifies system and boot partition (possibly other partitions too) - if they are intact, it applies the OTA patch to unused, secondary partitions. OTA updator doesn't care if your currently running boot image is patched or not, because it's not using files from RAM, but from ROM. Once update finishes its thing (stage 2/2), you install Magisk in backup boot partition, which after reboot becomes active. This is why it's possible to apply OTA while you're rooted with Magisk and you have A/B partition system (as long as you follow the guide).
vukis said:
vukis said:
1. Magisk Manager Tap "Uninstall" > Tap "Restore
Images" (DO NOT REBOOT)
2. Now Run the System update to download and install the
full OTA zip (DO NOT REBOOT)
3. Close all background apps
4. Open Magisk > Tap "Install" Tap "install" again Tap
"Install to Inactive/Second Slot (After OTA)"
5. Finally tap Reboot after Magisk installation is complet
Click to expand...
Click to collapse
Just tried this method with local upgrade. It works indeed! Thanks!
But TWRP got lost from local upgrade. So after restarting flashed twrp-installer-fajita-3.2.3-37.zip via Magisk Manager. But install script anounced that I am now unrooted.
Restarting phone confirmed that.
Anyway installed root again via TWRP.
What is safe way to install TWRP in between those 5 update OTA+keep root steps?
Click to expand...
Click to collapse
What is safe way to install TWRP in between those 5 update OTA+keep root steps? I once tried some kind of "OTA" update via twrp, but all was lost. (Could be a bit older twrp version without pattern unlock)
Why not just download the ZIP from the TWRP rather than use the OTA method?
The zips are available here.
I never uninstall magisk by the way. However that is part of the instructions. There are TWRP instructions, it's the third post, I believe.
OhioYJ said:
Why not just download the ZIP from the TWRP rather than use the OTA method?
The zips are available here.
I never uninstall magisk by the way. However that is part of the instructions. There are TWRP instructions, it's the third post, I believe.
Click to expand...
Click to collapse
Well I used this thread (How to Update/Return to Stock your OnePlus 6/6T(ROOT | NO ROOT | STOCK BASED |OTHERS)) from @mauronofrio as my guide. And in 2nd paragraph it states:
2. I have a stock rom with an unlocked bootloader and I'm rooted or I made some modifications:
You can use:
Local Update Method (Recommended)
Fastboot Update Method
TWRP Update Method
MSM Tool Restore Method
Local update method is recommended. So I was following this "general knowledge". Also I lost all user data (with nandroid backup) updating via twrp. Could be that my TWRP was outdated, but I would rather not to loose my user data again :/
Are you just OOS, rooted, TWRP?
I just flash the ZIP in twrp, flash twrp installer, reboot recovery, flash magisk. You can Repeat those steps if you want to update both slots. No reason to complicate it. I've never lost any data. The only time I format or lose data is going between OOS and AOSP roms. Then it is definitely important to backup data (always important to backup data anyways though).
Update 220823: Update for TWRP 12 and some other minor changes due to the switch from SafetyNet API to Play Integrity API
Updated 211203: include Magisk Canary
Edited 220113: correct a mistake in the Keeping Root process; some formatting changes
I keep seeing posts that say you can't root OOS after an OTA unless you have a full image installation zip. That's just not true these days (September 2021).
You can use @osm0sis' method in https://forum.xda-developers.com/t/...ices-platforms.2239421/page-149#post-84764713
And @g96818 suggests using "Install to inactive slot" which works provided you do it properly - see https://forum.xda-developers.com/t/...00-kb2001-kb2003-kb2005.4178675/post-85801253.
And here's how to do it using TWRP.
What you'll need:
OOS 11: TWRP image (.img) and (optionally) installer zip from https://forum.xda-developers.com/t/recovery-11-alpha-teamwin-recovery-project-8t-kebab.4302449
OOS 12: TWRP image (.img) and (optionally) installer zip from https://forum.xda-developers.com/t/...win-recovery-project-8t-9r-2022-07-27.4473983
Magisk apk - using stable from https://github.com/topjohnwu/Magisk/releases or using Canary from https://github.com/topjohnwu/magisk-files/tree/canary
Universal SafetyNet Fix (UNSF-MOD) by @Displax from https://github.com/Displax/safetynet-fix/tree/integrity
I'm also assuming you have an unlocked bootloader, know how to use fastboot, how to use TWRP, and how to use Magisk.
I'll go through rooting a currently unrooted version of OOS and then doing an incremental update OTA.
Root unrooted OOS
Install the Magisk APK. I find that this works nicer than letting the stub download the full app the first time you use it.
Boot into bootloader mode.
Boot TWRP using fastboot boot x.img where x.img is the TWRP image file.
Take a backup of the current boot and recovery partitions as you'll need them for successfully updating when the next incremental OTA becomes available.
Install the Magisk APK, just like you would install any zip file in TWRP. Note: the APK must be named Magisk-*.apk otherwise TWRP won't list it. Also install USNF if you are using Magisk Canary.
If you want to keep TWRP then install the TWRP installer zip.
Reboot.
If you are using Magisk Canary, in Magisk>Settings enable Zygisk, Enforce DenyList, and Configure DenyList. Then reboot.
Keeping Root on an incremental OTA update
Note: you do NOT need to (but can if you want to) follow this process if you're installing a full OTA. You only need to install the full OTA and then install Magisk to the inactive slot and reboot from Magisk when it prompts you.
If your phone tells you you have an update:
If you have TWRP installed, then boot into TWRP and restore the stock recovery and reboot.
In Magisk tap on "Uninstall Magisk" and select "Restore images".
Install the OTA update but don't reboot yet.
Turn on airplane mode so that apps can't call SafetyNet when you reboot the phone without root.
Reboot
When the phone has successfully rebooted the updated system, boot into bootloader mode.
Boot TWRP using fastboot boot x.img where x.img is the TWRP image file.
Take a backup of the current recovery partition as you'll need it for successfully updating when the next incremental OTA becomes available.
Install the Magisk APK, just like you would any zip file in TWRP. Note: the APK file name must start with Magisk- otherwise TWRP won't list it. Your existing Magisk settings, modules, and [hidden] Magisk app will be preserved.
If you want to keep TWRP then flash the TWRP installer zip.
Reboot and disable airplane mode.
BillGoss said:
I keep seeing posts that say you can't root OOS after an OTA unless you have a full image installation zip. That's just not true these days (September 2021).
You can use @osm0sis' method in https://forum.xda-developers.com/t/...ices-platforms.2239421/page-149#post-84764713
And @g96818 suggest this method (https://forum.xda-developers.com/t/...1-kb2003-kb2005.4178675/page-25#post-85386145) but this doesn't work for everybody (it doesn't for me).
And here's how to do it using TWRP.
What you'll need:
• TWRP image (.img) and (optionally) installer zip from https://forum.xda-developers.com/t/recovery-11-alpha-teamwin-recovery-project-8t-kebab.4302449/
• Magisk apk - I'm using v23.0 stable from https://github.com/topjohnwu/Magisk/releases/
I'm also assuming you have an unlocked bootloader, know how to use fastboot, how to use TWRP, and how to use Magisk.
I'll go through rooting a currently unrooted version of OOS and then doing an incremental update OTA.
Root unrooted OOS
1. Install the Magisk APK. I find that this works nicer than letting the stub download the full app the first time you use it.
2. Boot into bootloader mode
3. Boot TWRP using fastboot boot x.img where x.img is the TWRP image file
4. Take a backup of the current boot and recovery partitions as you'll need them for successfully updating when the next incremental OTA becomes available
5. Install the Magisk APK, just like you would install any zip file in TWRP. Note: the APK must be named Magisk-*.apk otherwise TWRP won't list it.
6. If you want to keep TWRP then install the TWRP installer zip.
7. Reboot
Keeping Root on an OTA update
If your phone tells you you have an update:
1. If you have TWRP installed, then boot into TWRP and restore the stock recovery and reboot
2. In Magisk tap on "Uninstall Magisk" and select "restore images". Or, if you're like using terminal commands, restore the stock boot image (you backed it up with TWRP) to the current slot using dd
3. Install the OTA update but don't reboot yet.
4. Turn on airplane mode so that apps can't call SafetyNet when you reboot the phone without root
5. Reboot
6. When the phone has successfully rebooted the updated system, boot into bootloader mode
7. Boot TWRP using fastboot boot x.img where x.img is the TWRP image file
8. Take a backup of the current boot and recovery partitions as you'll need them for successfully updating when the next incremental OTA becomes available
9. Clean up old Magisk backup copies of stock boot images by using File Manager to delete /data/magisk_backup_* directories
10. Install the Magisk APK, just like you would any zip file in TWRP. Note: the APK file name must start with Magisk- otherwise TWRP won't list it. Your existing Magisk settings, modules, and [hidden] Magisk app will be preserved.
11. If you want to keep TWRP then flash the TWRP installer zip.
12. Reboot and disable airplane mode
Click to expand...
Click to collapse
ctsProfile fails. Is there a way to fix it? Tried stable Magisk and Canary.
morphius88 said:
ctsProfile fails. Is there a way to fix it? Tried stable Magisk and Canary.
Click to expand...
Click to collapse
Best place for getting support for Magisk is https://forum.xda-developers.com/t/magisk-general-support-discussion.3432382/
Hi,
Thanks for the guide!
What can i do if i forgot to backup stock boot and recovery?
berthur said:
Hi,
Thanks for the guide!
What can i do if i forgot to backup stock boot and recovery?
Click to expand...
Click to collapse
You have a number of options:
If your update was an incremental OTA:
1. Ask in the Q&A forum or in one of the update threads if someone can share those two partitions with you.
2. If you're on 11.0.10.10kb05aa then you can get boot from a number of the update/rooting threads and the recovery from this thread by @mslezak https://forum.xda-developers.com/t/...-rooted-users-install-from-fastbootd.4316147/
3. Use this tool by @mslezak to create the full partitions from an incremental update https://forum.xda-developers.com/t/...urrently-op8t-11-0-9-9-kb05aa-posted.4314677/
If you updated using a full installation zip:
- use payload dumper to extract the two partitions from payload.bin
BillGoss said:
You have a number of options:
If your update was an incremental OTA:
1. Ask in the Q&A forum or in one of the update threads if someone can share those two partitions with you.
2. If you're on 11.0.10.10kb05aa then you can get boot from a number of the update/rooting threads and the recovery from this thread by @mslezak https://forum.xda-developers.com/t/...-rooted-users-install-from-fastbootd.4316147/
3. Use this tool by @mslezak to create the full partitions from an incremental update https://forum.xda-developers.com/t/...urrently-op8t-11-0-9-9-kb05aa-posted.4314677/
If you updated using a full installation zip:
- use payload dumper to extract the two partitions from payload.bin
Click to expand...
Click to collapse
Than you!
Hello!
Does someone have a backup of the Stock recovery from OOS 11.0.10.10.KB05BA and can share it here?
Thanks in advance.
Wishmasterflo said:
Hello!
Does someone have a backup of the Stock recovery from OOS 11.0.10.10.KB05BA and can share it here?
Thanks in advance.
Click to expand...
Click to collapse
Download the zip from https://forum.xda-developers.com/t/oneplus-8t-rom-ota-oxygen-os-repo-of-oxygen-os-builds.4193183/ and then use payload dumper to extract the files.
That worked like a charm. Thanks a lot.
I'm Magisk rooted and I have TWRP installed on my 8T EU model.
The OnePlus updater app registers that I am rooted and wants to download the full OTA.
Do I also have to do all the things you described after "Keeping Root on an OTA update" or is there a simpler way?
If yes, then I have a question regarding this step:
2. In Magisk tap on "Uninstall Magisk" and select "restore images".
Click to expand...
Click to collapse
Did Magisk automatically backup these images? Because I didn't do it myself. I only have backed up all my partitions (including boot) after I had installed TWRP and before I rooted.
EDIT:
BillGoss has thankfully already replied in another thread (in which I have basically asked the same question because I am an impatient bast***) where I suggested the overly present "easy" update scheme, which he expects to work. So this should be fine for other people in my situation:
1. Let the system download and install full OTA and DO NOT let the device reboot after it's done
2. Install TWRP A/B Retention Script
3. Install Magisk to inactive slot and reboot
EDIT2:
I just want to add that before having done the above mentioned steps 1-3, I have disabled all Magisk modules and rebooted the device. So the full procedure is the following:
1. Disable all Magisk modules and reboot
2. Let the system download and install full OTA and DO NOT let the device reboot after it's done
3. Install TWRP A/B Retention Script
4. Install Magisk to inactive slot and reboot
Youtube step by step video (he says that he "uninstalls" the Magisk modules but he just deactivates them):
Thanks @haitower
I've updated the OP to make it clear that the process described there only applies to incremental updates.
Also, to answer your question re Magisk backups: Magisk writes a copy of the installed boot image to /data/Magisk* before patching it. A "restore image" uses that backup.
BillGoss said:
I keep seeing posts that say you can't root OOS after an OTA unless you have a full image installation zip. That's just not true these days (September 2021).
You can use @osm0sis' method in https://forum.xda-developers.com/t/...ices-platforms.2239421/page-149#post-84764713
And @g96818 suggests using "Install to inactive slot" but this doesn't work for everybody (it doesn't for me) which works provided you do it properly - see https://forum.xda-developers.com/t/...00-kb2001-kb2003-kb2005.4178675/post-85801253.
And here's how to do it using TWRP.
What you'll need:
• TWRP image (.img) and (optionally) installer zip from https://forum.xda-developers.com/t/recovery-11-alpha-teamwin-recovery-project-8t-kebab.4302449/
• Magisk apk - I'm using v23.0 stable from https://github.com/topjohnwu/Magisk/releases/
I'm also assuming you have an unlocked bootloader, know how to use fastboot, how to use TWRP, and how to use Magisk.
I'll go through rooting a currently unrooted version of OOS and then doing an incremental update OTA.
Root unrooted OOS
1. Install the Magisk APK. I find that this works nicer than letting the stub download the full app the first time you use it.
2. Boot into bootloader mode
3. Boot TWRP using fastboot boot x.img where x.img is the TWRP image file
4. Take a backup of the current boot and recovery partitions as you'll need them for successfully updating when the next incremental OTA becomes available
5. Install the Magisk APK, just like you would install any zip file in TWRP. Note: the APK must be named Magisk-*.apk otherwise TWRP won't list it.
6. If you want to keep TWRP then install the TWRP installer zip.
7. Reboot
Keeping Root on an incremental OTA update
Note: you do NOT need to follow this process if you're installing a full OTA. You only need to install the full OTA and then install Magisk to the inactive slot and reboot from Magisk when it prompts you
If your phone tells you you have an update:
1. If you have TWRP installed, then boot into TWRP and restore the stock recovery and reboot
2. In Magisk tap on "Uninstall Magisk" and select "restore images". Or, if you're like using terminal commands, restore the stock boot image (you backed it up with TWRP) to the current slot using dd
3. Install the OTA update but don't reboot yet.
4. Turn on airplane mode so that apps can't call SafetyNet when you reboot the phone without root
5. Reboot
6. When the phone has successfully rebooted the updated system, boot into bootloader mode
7. Boot TWRP using fastboot boot x.img where x.img is the TWRP image file
8. Take a backup of the current boot and recovery partitions as you'll need them for successfully updating when the next incremental OTA becomes available
9. Clean up old Magisk backup copies of stock boot images by using File Manager to delete /data/magisk_backup_* directories
10. Install the Magisk APK, just like you would any zip file in TWRP. Note: the APK file name must start with Magisk- otherwise TWRP won't list it. Your existing Magisk settings, modules, and [hidden] Magisk app will be preserved.
11. If you want to keep TWRP then flash the TWRP installer zip.
12. Reboot and disable airplane mode
Click to expand...
Click to collapse
Hello,
Thank You for the detailed description, it helped me a lot.
I'm new with the Oneplus 8T phone. The last handset I had was the Mi MIX 2. The rules of using root are familiar to me and I understand everything from your description. I only have a question about TWRP, once I have them permanently installed on device, can I backup the system or date partition via TWRP? I always made backups in case i messed up something and didn't work properly.
This question came from https://twrp.me/oneplus/oneplus8t.html
They write there:
"This device uses Dynamic Partitions
This means that TWRP will not allow modifications to any of the partitions that make up the Super partition on the stock ROM. All backups and restores will include the full Super partition rather than the individual dynamic partitions.
In order to flash the individual partitions, you will have to boot into fastbootd."
I would be grateful for Your information, Thank You.
e1thx said:
Hello,
Thank You for the detailed description, it helped me a lot.
I'm new with the Oneplus 8T phone. The last handset I had was the Mi MIX 2. The rules of using root are familiar to me and I understand everything from your description. I only have a question about TWRP, once I have them permanently installed on device, can I backup the system or date partition via TWRP? I always made backups in case i messed up something and didn't work properly.
This question came from https://twrp.me/oneplus/oneplus8t.html
They write there:
"This device uses Dynamic Partitions
This means that TWRP will not allow modifications to any of the partitions that make up the Super partition on the stock ROM. All backups and restores will include the full Super partition rather than the individual dynamic partitions.
In order to flash the individual partitions, you will have to boot into fastbootd."
I would be grateful for Your information, Thank You.
Click to expand...
Click to collapse
See post #3 in https://forum.xda-developers.com/t/...recovery-project-8t-kebab-2021-29-11.4302449/
Hello!
Today I saw that EU: 11.0.12.12.KB05BA was available as OTA Update so I started to download it using the "Keep root on OTA Update".
During the download I recognized that I was still only connected to mobile network 4G instead of WiFi.
So I stopped the download of the OTA, restarted the phone and turned on WiFi but now I don't get the notification for the new OTA Update anymore and when checking for new Updates it says that my OOS 11.0.11.11 is up to date.
I guess the system has somewhere already stored that I started the download of the new 11.0.12.12 OTA but did not finish it and now I don't get the message to download it anymore.
Any idea how I can fix this so that I can download the new OTA again?
Thanks a lot!
EDIT: I am downloading it now via OxygenOS Updater (the full OTA).
BillGoss said:
See post #3 in https://forum.xda-developers.com/t/...recovery-project-8t-kebab-2021-29-11.4302449/
Click to expand...
Click to collapse
I understand that if I want to restore system and data when something doesn't work for me then I just do recovery for all the partitions, system, data etc that I do in twrp?
Please see the update in the OP regarding OOS 12.
What I need to do to upgrade and root version 11.1.1.1, I'm currently on a 9.0.16 rooted twrp magisk
Wheres the download link for the full OOS 11.1.1.1.1.1.1? Does OTA mean the full stock rom download or zip file just for update????
The way I did it from 10.3.8 and 10.3.12:
1) Boot into TWRP
2) Flash latest TWRP (twrp-installer-3.5.2_9-0-fajita.zip from official TWRP site) and Reboot to recovery
3) Flash the full OOS11 zip file. It will flash one of the two A/B slots - DO NOT YET REBOOT!!!
4) Directly after flashing the OOS11 zip flash twrp-installer-3.5.2_9-0-fajita.zip again
5) Reboot into recovery
6) Flash OOS11 zip again into the other slot - Again: DO NOT YET REBOOT!!!
7) Flash twrp-installer-3.5.2_9-0-fajita.zip again
8) Flash Magisk-v23.zip
9) Reboot
Looks more complicated than it really is. You just have to do everything twice to flash both slots. At least that's how I did it a couple of times and it worked without any issues.
!!!You could also Flash directly from the updater app without rebooting. Go into Magisk and install twrp A/B retention script and reinstall Magisk. I never did it that way because I always made a Nandroid backup before flashing everything.!!! See edit comment!!
Hope that helps.
Edit: I just read in another thread the Magisk route (A/B retentio...) leads to a Qualcomm Crashdump which needs unbricking via the MsmDownloadTool!!!
@ptuner: I usually go tp Settings -> System -> System Updates. Don't install, just but put the phone aside for some time. It will download the full zip into Internal memory/.Ota.
You download the full zip from any of the places you find via your search engine of choice.
MrBrainstorm said:
The way I did it from 10.3.8 and 10.3.12:
1) Boot into TWRP
2) Flash latest TWRP (twrp-installer-3.5.2_9-0-fajita.zip from official TWRP site)
3) Flash the full OOS11 zip file. It ill flash one of the two A/B slots - DO NOT YET REBOOT!!!
4) Directly after flashing the OOS11 zip flash twrp-installer-3.5.2_9-0-fajita.zip again
5) Reboot into recovery
6) Flash OOS11 zip again into the other slot - Again: DO NOT YET REBOOT!!!
7) Flash twrp-installer-3.5.2_9-0-fajita.zip again
8) Flash Magisk-v23.zip
9) Reboot
Looks more complicated than it really is. You just have to do everything twice to flash both slots. At least that's how I did it a couple of times and it worked without any issues.
!!!You could also Flash directly from the updater app without rebooting. Go into Magisk and install twrp A/B retention script and reinstall Magisk. I never did it that way because I always made a Nandroid backup before flashing everything.!!! See edit comment!!
Hope that helps.
Edit: I just read in another thread the Magisk route (A/B retentio...) leads to a Qualcomm Crashdump which needs unbricking via the MsmDownloadTool!!!
@ptuner: I usually go tp Settings -> System -> System Updates. Don't install, just but put the phone aside for some time. It will download the full zip into Internal memory/.Ota.
You download the full zip from any of the places you find via your search engine of choice.
Click to expand...
Click to collapse
all data is deleted yes?
ELAD098 said:
all data is deleted yes?
Click to expand...
Click to collapse
No, if you upgrade via TWRP as I described your data will NOT be wiped. But I always advice to make a full backup (nandroid and internal storage) before flashing anything!!
Are you satisfied by 11.1.1.1 generally ?
I was on 11 and rollback to 10 cuz battery issues. Can anyone give some info, are you satisfied with 11.1.1.1 ?
I am only using since last Wednesday but so far I am happy with it. The battery usage is identical to 10.3.12 with 0.7%/h (according to AccuBattery). Screen usage is probably the same. Can't really tell as I am not a heavy user.
Unfortunately I tried to install and got a brick
i can unlocked bootloader on 11.1.1.1
now i on 10.3.8 lock bootloader
i want to upgrade
I bricked mine too and used MSM tool to get to android 9, I installed TWRP 3.3.1-31 (pie version) and last version of Magisk, after that, I wiped all but internal storage, download OOS 11.1.1.1.1.1..1 and flashed with TWRP, done after like 5 min, I clean Dalvik cache and flash the same TWRP (3.3.1-31 pie version) + Magisk 23
Booted the system and noticed that Magisk wasn't installed so I got back to recovery, flashed once again Magisk and all Good until I fok up again in the future.
Messing around with rooted oos 11 only for 1 day so far and I already noticed the battery drain on this system is more (agressive)
I used adb to shut off the update notification posted by Sachin09.
Adb devices (for checking device is connected)
Adb shell
pm uninstall -k --user 0 com.oneplus.opbackup
exit
I have issues with phone after though. Phone says not online WiFi but I can watch youtube but I cannot open or view any attachments in gmail. I had Hotpot on when I ran the adb script. I'm wondering if that was a problem.
Question: If I repeat the adb script but swap install for uninstall, will it revert to normal? Any suggestions? I'm still on 10.3.12 and happy with it.
Jim44 said:
I used adb to shut off the update notification posted by Sachin09.
Adb devices (for checking device is connected)
Adb shell
pm uninstall -k --user 0 com.oneplus.opbackup
exit
I have issues with phone after though. Phone says not online WiFi but I can watch youtube but I cannot open or view any attachments in gmail. I had Hotpot on when I ran the adb script. I'm wondering if that was a problem.
Question: If I repeat the adb script but swap install for uninstall, will it revert to normal? Any suggestions? I'm still on 10.3.12 and happy with it.
Click to expand...
Click to collapse
Try to do a local update with full zip file. Maybe it help.
edited: try thiis command and see if it work
Code:
1. adb shell
2. cmd package install-existing com.oneplus.opbackup
3. exit
After that restart the phone.
Thank you! That worked. I'm back with the unwanted OS 11 update again.
I tried the "pm -k uninstall..." again which removed the update but the wifi and gmail issues returned.
I fixed it though. I rooted my 1+6T long ago. I have the TWRP and MAGISK zip files in root.
I booted into recovery, uninstalled Magisk with the uninstaller zip, installed TWRP..zip then installed Magisk..zip. I rebooted and now everything works.
I tested out OS 11.1.1.1.1 on my buddy's phone and I don't want that OS. Thank again for the help I needed. Jim44
I've been running custom roms since before android was a thing so I'm usually pretty good at this stuff.
I'm running 11.0.9.9 IN11AA
It refuses to root. I'm not sure if there is some step I'm missing that's so obvious nobody mentions it?
I was rooted, but when the new Magisk 23 came out without Magisk hide.. it was a big problem for me. I have corporate apps that will refuse to work on a rooted device. I restored the stock images (just like I do to get my OTA).. but then I uninstalled Magisk 23 and Installed 22.1. I then patched the bootloader (Dire3ct Install) and all was good, until I rebooted and had no root.
My bootloader is unlocked.
So I downloaded the full stock rom v11.0.9.9 IN11AA directly from Oneplus.
Extracted payload.bin
Used Payload dumper to get the proper boot.img.
Copied boot.img to my device and used magisk 22.1 to patch the file.
Downloaded the patched boot.img to my desktop.
Used ADB to flash it
adb reboot bootloader
fastboot flash boot patched_boot.img
fastboot flash boot_a patched_boot.img
fastboot flash boot_b patched_boot.img
fastboot reboot
Nothing. No Root.
I tried this over and over with different versions of magisk.
I tried downloading pre-patched version, and using fastboot boot patched_boot.img.
The device just hangs, and then boots using the stock image. No root.
I have no idea what could be wrong.
Ideas?
I just updated from v11.0.8.8 to v11.0.9.9 today on the EU variant.
Downloaded the update via Oxygen Updater, then used the built in updater with the local file downloaded.
Before restarting the device, opened up Magisk, then clicked "Install to inactive slot" since the new update gets put on the inactive slot. After it installed, rebooted the phone, and done. Updated to latest, and kept root. Didn't even turn off the modules, although I only have 1 installed.
This is my usual method to keep root while updating.
I'm not sure where you got your Magisk from, but i'm using v23.0 from the official github page (HERE), and it still has MagiskHide built-in, and currently using it for all of my banking apps, and it works.
Most likely the issue is that you have used the old Magisk version to patch the file.
Download the app from the link above, and use that to patch your boot.img file.
While the extracted file should work as flashed, I like to just boot from it rather than flash it and make it "permanent".
Use fastboot boot patched_boot.img to boot using the file once only.
After starting up, you should have Magisk installed in a couple of seconds. It might prompt you to restart the phone when opening it first time, but just ignore that and do not restart as you'll lose the root. Alternatively, you can install the app when you're not rooted yet, and when you boot using the patched boot.img, you won't need to restart.
When done, Magisk should tell that you have 23.0(23000) installed.
Then just use the built-in Install > Direct Install (Recommended) option within Magisk to install it to the current slot.
Do NOT install it to inactive slot. This option only to be used when updating via OTA.
Other option:
Download the Magisk app from the link above, and rename it to magisk.zip then copy it to your phone.
Download TWRP from HERE to your PC and use fastboot flash recovery twrp.img to flash this recovery.
Reboot to recovery. (Might take 2-3 mins to boot first time)
Flash the magisk.zip using recovery.
That's all you should need to be able to root.
I appreciate the help.
I was so hopeful you gave me what I needed, but it didn't work.
So, It wasn't an update issue... it was more of an attempt to downgrade Magisk.
I always OTA the same way as you and it always works.
I also always get Magisk from the official Github page.
What I got excited about was that I wasnt aware there was a working TWRP! So I thought.. THAT will fix it.
I didnt flash it, I just booted from it. I flashed Magisk that way, BUT... still not rooted.
Here is the interesting bit.. when flashing Magisk via TWRP, it detected that my boot.img was already Magisk patched and not stock (Which is right). It's like the boot.img is correctly patched, Magisk just isn't seeing it.
I'd be ok with a full wipe and factory reset at this point, but I'm not even sure that will fix it.
** Edit - I tried manually flashing the latest full OOS downloaded from Oneplus. It didnt help. I finally factory reset and it's working now.
This is my fav. root method.
[GUIDE] Easiest way to root/magisk Oneplus 8 Pro
This method will not flash any custom recovery or any custom boots. Caution: I don't take any responsibility. Proceed with your own risk and resilience in mind Prerequisites: Oxygen OS 11 (tested with 11, issues reported with 10) and a PC with...
forum.xda-developers.com
ps000000 said:
This is my fav. root method.
[GUIDE] Easiest way to root/magisk Oneplus 8 Pro
This method will not flash any custom recovery or any custom boots. Caution: I don't take any responsibility. Proceed with your own risk and resilience in mind Prerequisites: Oxygen OS 11 (tested with 11, issues reported with 10) and a PC with...
forum.xda-developers.com
Click to expand...
Click to collapse
Agreed, this is a great method. I tried that too before I ended up doing a reset... no good. I somehow broke something with the rom outside of Magisk so that Magisk wouldnt work. Whatever it was, A full wipe fixed it..