Hi folks,
I'm aware of the registry hack to change the RingTone settings (such as vibrate length, etc), but can this be done for the notification alert? When I get a notification the phone just vibrates for too long.
Any help appreciated.
PaulB
Hi,
Any help on this would be most appreciated, as the vibrate just goes on too long, and not only annoys me but everyone in my (quiet) office!
You can set the vibrate length in seconds for RingTone0 in the registry so there must be an equivalent for the notification alert?
PaulB
i second this request, the whole scripting thing for ringtone0 is simple but bizarre especially as there seems to be no equivalent settings for text/email notifications. There must be a way!
Change duration of notification vibration (hey I'm a poet!)
Sorry to bump this again, but as some time has passed I wondered if anyone had managed to find the reg settings for the notification alert?
I really need to shorten the vibration duration for notifications.
I second this, the message alert is way to long. Hope someone have a sollution to this.
Jarle
Fix for long vibration
I recently switched from the Sidekick 3 (I had the sidekick 1, sidekick 1 color, and sidekick 2 as well) to the 8525/TyTN and immediately found this vibration issue described above extremely annoying. The sidekick uses the sound file normally played to generate the vibration pattern, meaning if the sound file has two large amplitude alerts 1 second apart, if the phone is in vibrate mode, it would vibrate twice, with a 1 second spacing.... along with "the beat" of the audio.
Anyways, I discovered today that Windows Mobile does this as well to some extent. If the phone is set to vibrate mode, then it seems that all notifications vibrate as the long, 5 second or so, vibrate that you're all familiar with. HOWEVER, if the notification is set to vibrate and sound acoustically, it vibrates for the duration of the sound file. Strangely, this does not work when the phone is set to only vibrate. To get around this, what you need to do is set your notification (text message, e-mail, whatever) to both play a short sound and vibrate, then set your phone's audio to be on, but then turn the volume all the way down. In this setting, the phone does not play a sound, but does vibrate according to the length of the audio file.
I haven't tested this extensively, but it seems to work so far. This actually was one of my biggest complaints about the phone and i'm very glad i've found a simple work-around.
Let me know your experiences and/or if it doesn't work for you,
Todd
quite a great idea there, but was hoping someone has figured out a better solution?
what about going one step further with this and make a short wav file of pulsed noise, but at 20kHz. you won't here it!
All,
I have just joined this board searching for a solution to EXACTLY this problem. What is required please is a registry tweak that shortens the vibration alert for text messages, etc, when the phone is set ot vibrate only.
The ringtone fix to shorten the vibration alert works when a call comes in but NOT when a message comes in.
Any help on this would be very much appreciated.
Thanks
WB
Oh wow. I have the same annoyance with my phone. You send a text on vibrate and it goes nuts for an hour! Not really that long, but for just a text message notification it should be a little 1 second bitz.
This long vibration is really bad when you are in class and it goes for so long. My phone hits right against those plastic chairs through my pocket and resonates though out the whole room.
Unfortunately the Notification registry entries don't have a script option.
If you go into
HKEY_CURRENT_USER\ControlPanel\Notifications
the Default String tells you what the each directory is for.
The other keys are
AvailableOptions - What options you can pick from in the Sound/Notifactions screen in settings,
Duration - the length of time the light flashes (5,10,15,20,30,45,60min, 0=no limit)
Options - what sort of notifications you want
1=play sound
2=vibrate
3=play sound, vibrate
4=flash light
5=play sound, flash light
6=flash light, vibrate
7=play sound, flash for, vibrate
8=nothing
9=play sound, display message
10=nothing (can only pick play sound and vibrate)
11=play sound, display message, vibrate
12=Display message, Flash light
13=play sound, display message, flash light
14=display message, flash light, vibrate
15=play sound, display message, flash light, vibrate
senergy said:
Unfortunately the Notification registry entries don't have a script option.
Click to expand...
Click to collapse
So what you are saying is there is no way of making the vibration shorter? No way at all? Could you add an option for time? Is there some program?
Senergy,
Many thanks for your response. Disappointing news as this is a serious nuisance.
I have lost count of the number of times I have been in meetings where the phone has gone off in vibrate mode only for the whole world to know I have had a message. Many a time I simply turn all alerts off which defeats the objective of having a discrete vibrate system.
I rang HTC's support team in the UK and got nowhere.
I wonder if a written query into them might get a more productive response?
WB
Anyone heard of any solutions yet? I've been searching google, forums, etc for days with no luck yet.
DRChrysler,
No but see thread link below. Shantz may yet be able to help us out here.
Cheers
WB
http://forum.xda-developers.com/showthread.php?t=311838
I just find that the ringer is often not loud enough for me. Maybe it's my ripe old age of 32 that has brought me to this point of degraded ability but if I leave my phone downstairs or vice versa, I usually won't hear it ring. Worse is the one time sound notification, that's rather short in my opinion, for SMS's. Both of these are even worse if I forgot to remove my phone from the protective sleeve.
I searched and only found people having issue with the volume in relation to calls but no mention if I could increase ringer volume above what is currently selectable. Is there any way to increase this volume and/or extend the ring time for the text notifications?
http://www.wirelessinfo.com/content/T-Mobile-G1-Cell-Phone-Review/MakingReceiving-Calls.htm
According to that website, they tested the G1 ringer volume and found it to have the lowest dB of all the phones they tested.
Is it that speaker is underpowered? Is it possible that we may be able to re-encode the ring tones with a higher volume to help compensate?
I don't think it has a low volume... I think it has to do with what you are using because it is just as loud as my Wing when playing music.
What I'm using? As in which ring tone? I've tested several different ones and they all seemed the same to me. Do you have any suggestions?
I have the same problem frequently, it isnt that you dont hear the rings or notifications, they actually dont play at all. I have had this happen with my phone on in front of mewith a great signal, and I call it from another line. It "rings"(but never does), finally ending in a voicemail. When I hang up and check the G1 it shows a missed call and voicemail.
Unfortunately there is no fix, just a reminder that you bought a phone that shouldnt be expected to work until the system is given time to mature. Until then, you either return the phone, sell it, or live with its limitations. (or so I have been told)
No, I have that happen too, but I do frequently have it ring just not loud enough for me to hear it. I know because my girlfriend often has to tell me when it's ringing if I've left it in another part of the house.
I have also noticed that the ring volume isnt great with the standard wring tones. Using mp3 ringtones is better.
Notifications do sometimes seem buggy. I have had no notifactions with messages when i have had the message application open. Not even vibrate.
I have missed calls installed now for notifications and it seems to not happen anymore.
Theres also a program out in the market that allows you to create your own ringtones from full songs. You could just cut a song into a small section and use that for messaging.
Its called ringdroid
I have missed calls installed now for notifications and it seems to not happen anymore.
Click to expand...
Click to collapse
The down-side to this feature of the program is, the notification light will stop. If you check your missed calls, texts, so on from the bar on top.
You have to actually open the "programs" manually to keep the notification light working.
Ex. if you get a missed call, instead of pulling down the notification bar to check. Press the call button once.
if you get a text, open the messeging inbox using the messeging button or SMSChomp button.
Try to limit how often you have to pull the notification bar down.
Pulling the notification bar DISABLES ALL notifications of all kind.
Is there a way to disable Wireless Charging Notification Sound? There are two different types of sounds my S5 makes when placed on a wireless mat. A three tone sound, followed by a two tone sound. The three tone sound is made only once ... I do not have any problem with it. Its the two tone sound that drives me crazy. It keeps ringing all through the night, at random times. It looks like it makes a sound each time the charge state changes (stop, start, resume, pause, etc). I do not want to disable my notification sounds or phone volume altogether. I just want to mute this one sound (without ROOT, I would like to add). TIA
Is your phone in the case? Is that it losing connectivity with the wireless charger. If it is in a case try using the phone on the charger without the case to see if this prevents the two tone from repeating
Sent from my SM-G900V using Tapatalk
Same question for me.
I would also like to find out how to disable this sound. I have root so I have access to system files. I wonder if there is a setting in /system/csc/features.xml to investigate. I know that the camera shutter sound can be disabled from that file so I wonder if it also deals with notification sounds.
I've searched for this functionality and not found any good way off doing it.
I leave my phone on loud at night so certain notifications will wake me in case of something important. To wake me some of these notifications are loud and extremely annoying. I would like for my phone to vibrate first, then have a delay of over 30 seconds before the notification tone. I would like the notification tone to not play if I use the phone between vibration and sound.
Can anyone point me in the direction of an app or mod and that would let me do this? Google has failed me so far.
I don't want to create sound files with 30 seconds of silence at the start as this requires me to mute my phone and then I may forget to turn the volume up again.
the built in sound modes that we can adjust from the pull down are: normal, silent, vibrate.
the silent and vibrate work well and so does normal most times but here is what I am seeing.
when every sound level (alarm, media, notification, ringer, systems, voice) is set to something and you start cycling between them.... the second tine you cycle to normal, the notification level goes to zero.
does anyone know where this file is located? I'd really live to make it something static so the normal level is always the same.
thanks so much!