Database Users

GSPocketMagic++ configuration.

Hi, first off im new to the XDA EXEC so be gentle , I've already unlocked and updated the device and now I'm just getting use to customizing it.
I've installed GSPocketMagic and although i can get it running theres a few things im unsure of.
1. it seems to slow the boot up of the device considerably, don't know why or if that might be some remnance of O2 stuff kicking around on the device.
2. The icons don't seem to blend into the themes properly. For instance the close buttons seem to be of a different colour and you can easily see that. On the main today screen when no apps are running I have an obvious discoloured sqaure in the top right hand corner. I'm guessing this might have something to do with the bmp pallettes for the images? anyone done anything about this?
3. Skining the menu , on the download site is shows its possible but i've had no luck.
it looks like a good app but its just not reaching what i need any ideas on how to configure it properly as so far from what i've seen theres limited information on it and i've not found any translations etc.
Regards

Download the latest here: http://homepage3.nifty.com/UK-taniyama/tools/GSPMagicPP.html
Goto Start menu > Option > Setting... and and "play" with the settings of GSPocketMagic++
Cheers

i've had a play with the settings already and could really find what I was looking for the most i've managed to do is change the startup menu button to an image but it didn't resolve the fact that the button images for say close are off colour (even if you install the VGA xscale version (as i stated before).
Also I can't see how you skin the menu so it'd look similar to that of the existing menu bar (just for continuity of the plug in). Then finally theres the fact on boot its terribly slow to start up with this addition (or so it seems). However its still a vanillia(ish) device so i could be som O2 crap kicking around that i haven't removed yet?
dunno..hence the thread.

Smallmenu and GSPocketMagic will take quite a while to generate the icon cache on first launch. Just let it do it. It doesn't do it again after the first launch unless you manually refresh. It takes about 30 seconds for me.
V

If you goto Goto Start menu > Option > Setting... and directly close de Setting page it wil refresh the cache again. You can time it how log it takes. I have about 30 shortcuts in the menu (which I pointed to \windows\start menu\programs and not the standard folder), also to the SD card, and it takes about 4 to 5 secs to refresh it.

installing GSPocketMagic
Hello downloaded it
How do I install it on the Exec
Thx.
Tim

lol
is there an update 2 this? where can i find skins?

Very strange, icons are missing from the windows menu?

I have a problem with the htc hd 2, when you press the windows logo button on the bottom of the phone you jump to menu where all the icons are (such as installed programs icons and settings).
what happened is that all icons are missing except the today icon, how can
you bring all those icons back?
Also when you install a new program the phone doesn't make any icon in the menu. I have soft reset my phone with the reset button on the back but wouldn't work.
Can somebody help me with this problem?

Rayan1987 said:
I have a problem with the htc hd 2, when you press the windows logo button on the bottom of the phone you jump to menu where all the icons are (such as installed programs icons and settings).
what happened is that all icons are missing except the today icon, how can
you bring all those icons back?
Also when you install a new program the phone doesn't make any icon in the menu. I have soft reset my phone with the reset button on the back but wouldn't work.
Can somebody help me with this problem?
Click to expand...
Click to collapse
I hope for your sake I'm wrong, but that sounds like a hard reset is needed, to me. Wait and see if anyone else has any suggestions, but that sounds quite a nasty problem.

I have got the same problem... any ideas how to fix it without hard reset?

I have two such icons .. HTC people and HTC calendar. It seems it has something to do with turning corresponding tabs off and on again.

Yes it would me nice to fix it without hard reset Any suggestions?

corresponding tabs off and on
Dr.Sid said:
I have two such icons .. HTC people and HTC calendar. It seems it has something to do with turning corresponding tabs off and on again.
Click to expand...
Click to collapse
How do you turn the corresponding tabs off and on?
Another thing hhen you go to the setting en press menu on the right corner then press more then nothing appears/happen?

Settins / personalize / home screen tabs
And I can confirm it .. first I had no such icons. Then I disabled calendar tab. Still nothing. Then I enabled calendar tab. And THC Calendar icon with no picture (only default one) showed up in the start menu. Now if I remove the tab, the icons gets removed too. But as I enable the tab again, icon is back.
Same for HTC People icon.
Only tweak I use which could have something to do with this enabling all settings icon in start menu (via BsB tweaks).

Dr.Sid said:
Settins / personalize / home screen tabs
And I can confirm it .. first I had no such icons. Then I disabled calendar tab. Still nothing. Then I enabled calendar tab. And THC Calendar icon with no picture (only default one) showed up in the start menu. Now if I remove the tab, the icons gets removed too. But as I enable the tab again, icon is back.
Same for HTC People icon.
Only tweak I use which could have something to do with this enabling all settings icon in start menu (via BsB tweaks).
Click to expand...
Click to collapse
I see what you mean thanks for the effort, but with these icons the htc has no problems, its with icons you see when you press the windows logo button, its a long list with all the installed applications. In this screen they all disapeared except the today icon.
Some help from anybody would be very appreciated?

Hmmm
I had the same issue.
Flashed 1.48 over it.
Havn't had the problem since.

Check this dudes thread for additional/replacement icons...stunning stuff!
http://forum.xda-developers.com/showthread.php?t=591754

Updating rom solved the problem thanks for help me out!!

Any other solution available other then updating my ROM...cause it's already up-to-date.
I got this issue after a soft reset by BsB Tweaks.

nljuggler said:
Any other solution available other then updating my ROM...cause it's already up-to-date.
I got this issue after a soft reset by BsB Tweaks.
Click to expand...
Click to collapse
Additional info:
- I'm using a Dutch ROM (so "\Windows\Startmenu\Program files" is called "\Windows\Startmenu\Programma's" )
- It happened after a soft reset after altering the Led Notifications/Message Notification setting
(I think the soft reset itself might have caused it)
- I have been moving startmenu items around using my ActiveSync connection
All I've found on the forum thus far is: Hard reset your device...but I really don't wanna.

Damn, it happened again. I'm stuck with just the Today icon again.
For a while I thought: leave it be. With Co0kie's Home Tab I can access all applications I need.
But I recently noticed that I cannot access my advanced settings screen either... and there's no shortcut for that.
Too bad, nobody came up with a solution that doesn't require a hard reset or ROM Update (which basically means the same: Clean slate).
Anyone?

Changed my lockscreen wallpaper now Sense won't launch

Hi Guys,
I'm having a little problem with my phone. After a lot of tweaking yesterday, I finally had my phone working perfectly. In a final change, I just tried to change the lockscreen wallpaper to a custom picture. I'm not sure what happened but, on restarting the phone, I'm getting:
'unable to start HTC Sense, tap here to try again'
and obviously can't get back to the home screen to change the wallpaper back via the sense settings although I can navigate the regular settings menu via the start tab and Sense is ticked in the settings. I've gone to the gallery and deleted the picture I assigned to the wallpaper but it's still showing when I restart the device.
Now, as I said, I've added a lot of cabs and made a lot of reg-tweaks and would really prefer not to do a hard reset if I can help it and have to do them all again. I changed the font on the device yesterday and don't know if that is related to the problem but I navaigated through the settings and removed that cab but still no joy.
Any help would be great, more specifically if I can restore the phone to earlier settings or maybe change the lockscreen wallpaper via the registry?
Thanks in advance

I don't know if this will work but try, windows, settings, (menu - all settings), today and unclick use this wallpaper as a background. You can also tab across and untick HTC sence and try restartng your phone

Thanks for the tip. I just ended up hard resetting anyway and everything's working ok now. I tried unticking sense but no joy.
Thanks

I think I've found the solution (at least before hardresetting):
Goto KHEY_CURRENT_USER\Software\HTC
Just delete the key MANILA (back up to a file before you delete if you want)
Reset

HD Wall

Ok, Newbie here. I have the Energy Sense ROM on my TMO HD2 and I have searched but no luck at finding what all I need for the HD Walls. Any help would be appreciated.

Are you sure that ROM doesn't have Cookie's Home Tab (CHT) baked in? If it does, you don't need HDWall beacuse that functionality is included in CHT's latest version.
If the ROM doesn't have that already, I'd recommend you just getting CHT anyway, it incorporates HDWall's methods, among others, and is a great tool to have around in general.
I used to use HDWall by itself all the time, but it's fairly complicated, and it's so much easier now just to use CHT to get the same effect.

ya its got the latest cht already. i kinda thought that but wasnt sure.so what else do i need to create wallpapers? is there a cab for the program i need on the desktop? sorry for the lack of knowledge, just couldnt find anything on it.

HD2TM said:
ya its got the latest cht already. i kinda thought that but wasnt sure.so what else do i need to create wallpapers? is there a cab for the program i need on the desktop? sorry for the lack of knowledge, just couldnt find anything on it.
Click to expand...
Click to collapse
Check out the CHT thread, there's info there on the different ways you can do that, it's done through the CHT interface.
EDIT: Here's the link to it http://forum.xda-developers.com/showthread.php?t=625483
You'll also want to check out the companion tool for that, Cookie's Home Tab Editor (CHTE). You probably have that as well on your ROM, it extends the functionality of CHT: http://forum.xda-developers.com/showthread.php?t=633590

Thanks! Now I just need to find the program for my desktop to create the wallpaper and create a cab file right? If so where can I find these at? If I overlooked it my apologies.

HD2TM said:
Thanks! Now I just need to find the program for my desktop to create the wallpaper and create a cab file right? If so where can I find these at? If I overlooked it my apologies.
Click to expand...
Click to collapse
No, you don't even have to do that, you just need to have the image you want to use saved on your phone somewhere (like in a "wallpapers" folder on your SD card, for example), and then you use the options in CHT to choose that image and apply it as the background on your phone. CHT will apply it on all tabs, and even skin the top and bottom bars for you, like HDWall would do.

I switched from using HDwalls to strictly CHT a while ago. It is much less problematic and easier to change wallpapers.
I don't suggest keeping your wallpaper in your SD card but copy it to the "wallpapers" folder in my documents. If you have it plugged into your computer (i do a lot) and reboot the phone it won't find the wallpaper on your SD card as it can't see the SD card because it it plugged in. Yeah, clear as mud.. anyway.

DECIM8 said:
I switched from using HDwalls to strictly CHT a while ago. It is much less problematic and easier to change wallpapers.
I don't suggest keeping your wallpaper in your SD card but copy it to the "wallpapers" folder in my documents. If you have it plugged into your computer (i do a lot) and reboot the phone it won't find the wallpaper on your SD card as it can't see the SD card because it it plugged in. Yeah, clear as mud.. anyway.
Click to expand...
Click to collapse
Very good point decim8, and I hadn't though of that...I had assumed that it cached the final wallpaper somewhere on the phone, but it's probably true that having it on the SD card will prevent the image from being usable whenever you're connected in disk drive mode to a pc over usb.

ok, I think Im a retard. I open CHTE and switch to HD wallpaper, reset the phone. I have saved the photo I want under the wallpaper folder on the device, and cant seem to figure out how to set it. The set wallpaper option goes away once I set it to HD and when I go to the photo and try and set it to the wallpaper the only option is todays background and I only see it when Im in the start menu. All tabs are black background and cant change to anything else.

From your home screen...
Hit the Menu soft key and then Set Wallpaper at the top.
Under the Home Tab section, tap the first thing, Portrait... and browse to the location you saved the image. Repeat as needed for the other sections.
Worst case, hit Albums, All...

It doesnt give me the option to set the wallpaper from my home screen (not able to be selected). It is an optoon when Im not trying to use HD though.

Sounds to me like you still have HDWall selected in CHTE.
Select Menu (soft key at bottom of home screen)
Select Co0kie's Home Tab Editor
Select Miscellaneous settings
Scroll down to the "wallpaper Mode" section. "HQ Wallpaper" should be selected, not "HDWall"
Please double check that this is the case. With this option selected you should be able to select "set wallpaper" with the Menu softkey.
EDIT: I have landscape on my home screen enabled via BSB tweaks and "set wallpaper" is not available from the menu when in landscape mode. Works fine in portrait.

Thanks!!!!!!! See I told you I was a retard. I did have HD selected instead oft the HQ like I should have. Thanks for all the help
Edit: The wallpaper is working correctly BUT when I try to set the Skin Taskbar and Softkey bar it gives me an error. Says "Out of Memory Exception"? The phone is no where near out of memory. I cant win for losing.

[ROM][PX5][S32F0][9.0] Malaysk ROM for PX5 MCU S32F0 RK3368 with Android 9

Only for devices processor Rockchip PX5, MCU - S32F0
Mod Pie 9.0 (10 fake android) Android PX5 S32F0 RK3368
Not suitable for those who have a real 10 android installed. Install the Device Info HW application in Google Market and look at the API level. 28 API - 9 android, 29 API - 10 android.
Please excuse me. I'm bad at spelling in english. I use the translator Google. I rarely answer questions in private messages and on the forum. Sorry.​How to find out if your device is suitable for this forum thread? You can see of the device in Settings - About device :
​There are 2 types of firmware for installation, with different installed MCU versions - the first type of firmware is more common with an installed MCU that starts with letters and numbers - S32F0_XinRC, S32F0_ZIQI, S32F0_LingYun, S32F0_Leima, S32F0_yunht and other compatible MCUs (you need to find out) and the second type of firmware for the installed MCU - S32F0_yuemao and others (you need to find out). To find out what version of the MCU you have installed, go to the Settings - About device application and look at the line with the MCU name.
LITE Firmware mod for the first type of installed MCU - S32F0_XinRC, S32F0_ZIQI, S32F0_LingYun, S32F0_Leima, S32F0_yunht and others
The instruction in the archive of the LITE version of the firmware was updated on March 28, 2022
​What's added:
Full ROOT access (SuperSU)
Added PlanetsPack live wallpapers
ESFileExplorer, RootExplorer programs.
New application for system settings - Settings Mod.
Two modified launchers with the ability to configure them in Mod Settings - Mod Settings - Launcher Settings.
Added in Mod Settings - Mod Settings - Statusbar Settings
a) Make the Status Bar semi-transparent
b) Clock settings in the StatusBar
c) Gradient StatusBar.
Added in Mod Settings - General Settings - Developer options
Many other changes and additions.
Installation:
1. Unzip the archive Update_lite_Malay_Mod_S32F0_XinRC.rar
2. Write the files ZQ_PX5C_UPDATE_lite_Malay_Mod_S32F0_XinRC.zip and Mod_Installer.apk to a USB flash drive (preferably formatted in FAT32)
3. Insert the USB flash drive into the loaded system in the device.
4. Install the Mod_Installer.apk application from a USB flash drive using any file manager.
5. Launch the Mod Installer application.
6. Click on the "INSTALL MOD RECOVERY" button and wait for the end of the process.
7. The device will automatically reboot into Recovery and the firmware installation will begin.
8. After the end, you will be asked to remove the USB flash drive - pull it out and you will be taken to Recovery.
9. With the help of short-term finger presses on the screen, we go down to the item "Wipe data / factory reset"
10. Hold your finger on this item for a long time until we get to another menu. There we press "YES". All data will be deleted and reset to factory settings.
11. Click on the item "Reboot system now"
12. The device will reboot. This completes the installation.
13. The first download will take a long time!
If the sound does not work for you, then you need to go to Settings and specify your sound type - with or without DSP.
The instruction in the archive was updated on March 28, 2022
Download: https://disk.yandex.ru/d/_VHEwJvIPuZjKQ
Mirror: https://mega.nz/file/k04jgbTb#qRrhtDylG7gWu51UfKiN8jRDl7VK4L7llkLm82gG8zw
Not suitable for those who have a real 10 android installed. Install the Device Info HW application in Google Market and look at the API level. 28 API - 9 android, 29 API - 10 android.
LITE Firmware mod for the second type of installed MCU - S32F0_yuemao and others
The instruction in the archive of the LITE version of the firmware was updated on March 28, 2022
​What's added:
Full ROOT access (SuperSU)
Added PlanetsPack live wallpapers
ESFileExplorer, RootExplorer programs.
New application for system settings - Settings Mod.
Two modified launchers with the ability to configure them in Mod Settings - Mod Settings - Launcher Settings.
Added in Mod Settings - Mod Settings - Statusbar Settings
a) Make the Status Bar semi-transparent
b) Clock settings in the StatusBar
c) Gradient StatusBar.
Added in Mod Settings - General Settings - Developer options
Many other changes and additions.
Installation:
1. Unzip the archive Update_lite_Malay_Mod_S32F0_yuemao.rar
2. Write the files ZQ_PX5C_UPDATE_lite_Malay_Mod_S32F0_yuemao.zip and Mod_Installer.apk to a USB flash drive (preferably formatted in FAT32)
3. Insert the USB flash drive into the loaded system in the device.
4. Install the Mod_Installer.apk application from a USB flash drive using any file manager.
5. Launch the Mod Installer application.
6. Click on the "INSTALL MOD RECOVERY" button and wait for the end of the process.
7. The device will automatically reboot into Recovery and the firmware installation will begin.
8. After the end, you will be asked to remove the USB flash drive - pull it out and you will be taken to Recovery.
9. With the help of short-term finger presses on the screen, we go down to the item "Wipe data / factory reset"
10. Hold your finger on this item for a long time until we get to another menu. There we press "YES". All data will be deleted and reset to factory settings.
11. Click on the item "Reboot system now"
12. The device will reboot. This completes the installation.
13. The first download will take a long time!
If the sound does not work for you, then you need to go to Settings and specify your sound type - with or without DSP.
The instruction in the archive was updated on March 28, 2022
Download: https://disk.yandex.ru/d/qaCFAY7qlxNsAQ
Mirror: https://mega.nz/file/9tJyWSKA#EdaMXvKH-CXgQXwt0eJbGrxGr83PE-t16SRMAaw4edo
Doesn't fit anyone with a real 10 android !!!
DSP Programs - https://forum.xda-developers.com/t/...0-rk3368-with-android-9.4194651/post-84182975
FULL Firmware Version Information:
Video :
What's added to the full version:
Root access (SuperSU)
Six completely modified launchers with the ability to view tags for music listening (any music app), bluetooth music and radio stations (not in all launchers).
The ability to customize Launchers (enable, disable unnecessary functions in the settings) and weather settings in them and display the speed via GPS.
4 types of screen savers with analog and digital clocks, with the ability to display GPS speed, weather, music listening tags (any music application),
Bluetooth music and radio stations from the Radio app. Full customization of screensavers - color, font, disable unnecessary functions, your car logo, etc. In the settings.
Change splash screen - hold your finger in the center of the screen for 3-5 seconds - the view will change. Other screensavers are in the OEM app.
Changed the volume bar and reduced its disappearance time. It is also fully configurable in Settings Mod - Mod settings - Sound settings.
Fully customizable panel status with the ability to enable and disable buttons and icons in it in the settings and it is possible to completely disable it.
Reload key added to the status bar.
Added buttons "Screensaver", "Music", "Navigation", "Bluetooth Music" in the status bar (can be enabled or disabled in the settings).
The screensaver runs in all programs, there is an Application Whitelist in Mod Settings where you can specify applications where the screensaver will not start.
Added a list of applications in the Settings Mod, where you can specify autostart after sleep.
Added equalizer ViperFX (if you have a device with DSP, then it does not work)
Changed Bluetooth Music app.
Music and Radio applications have been completely changed. You can install standard applications from the OEM application.
You can execute your scripts in the System /etc/Init.d folder
Added online radio PCRadio
Settings Mod - MOD Settings - System settings - added automatic screen brightness by GPS.
Added four customizable buttons to screensavers to launch your programs.
- Long press on the button - select the application.
- Short press on the button - start the application.
Added the ability to automatically adjust sound based on GPS speed.
Located in Settings Mod - MOD Settings - Sound settings - Auto volume control by GPS.
Added the ability to set pop-up messages about playing Music, Radio, Bluetooth music and PCRadio.
Located in Settings Mod - MOD Settings - System Settings - Popup Settings.
Fixed GPS work.
- Improved location accuracy.
- With a cold start - satellites are located in 40-70 seconds.
- With a hot start (after sleep or reboot) - instantly.
Anyone who had problems with USB ports or missing WiFi - fixed.
USB and WiFi initialization occurs after full system boot and after sleep.
New method and settings of the whitelist of programs to run after sleep (located in Settings Mod - Mod Settings - System Settings)
New whitelist for programs in which the screensaver will not start (located in Settings Mod - Mod Settings - Screensaver Settings)
You can now set the time for showing music and radio notifications in Settings Mod from 1 to 10 seconds.
You can change the DPI of the screen. Range from 260dpi to 160dpi (default standard 220). Located - Settings Mod - Mod Settings - System Settings.
More flexible graphic equalizer settings are in Settings Mod - Mod Settings - Sound Settings.
Settings Mod - Mod Settings - Car - added GPS fix (enabled by default).
Redesigned regular widgets for managing Music, Radio, Bluetooth music, etc.
Added 5 attempts to initialize WiFi every 20 seconds with checking network availability
Added forced inclusion of disabled WiFi SSIDs, the GU for some reason periodically sets the Disable status of the working SSID and does not automatically connect.
Added display of RDS Radio in the screensaver and in some launchers.
There are a lot of other additions and fixes.
Installation:
We must download the LITE version, read the instructions in the archive along with the firmware, install the LITE version and check its work on your device, if everything suits you and you want more functions and changes in the firmware, then we do everything that is written in the instructions for the LITE version ...
A mini update to version 1.1.1 has been released (2 mb) from 5 February 2021
Fixed the work of online applications such as Spotify.
In Settings Mod - Settings related to sound - added a settings item - List of applications that have problems with sound (you need to add your players there, in which the sound does not work correctly, disappears when rewinding, the next track or after sleep)
OTA (Internet) update to version 1.1.5 (FULL version) of May 15, 2021
(NEW) Android base from 08 March 2021
(NEW) Hardware buttons control alternative players without starting the radio
(NEW) New launcher with Day and Night support - Launcher 10 android with support for managing standard Radio, Music, Bluetooth applications
(NEW) Support Day and Night in Mod Settings, Settings, Factory Settings, Basic Settings.
(NEW) Added an application for voice calling contacts from the bluetooth application - MTCDialer (Voice Dialer) - launch Voice Dialer and for example say "<Contact Name>" from the bluetooth application.
(NEW) Support for voice call of contacts from Google Assistant (your contacts from your Google account must be synchronized) - for example, say "Call <Contact Name>"
(NEW) Added alternative True Contact dialer to sync and call your contacts from google account.
(NEW) Added new screensaver with clock and date only. Located in the OEM application - ScreenClock__black
(NEW) In Settings MOD - Settings Mod - System Settings - Autostart applications after sleep / reboot - Disable the regular autostart mechanism for Radio, Music, BT after sleep and boot.
(NEW) In settings MOD - Settings Mod - System settings - Auto screen brightness by GPS - Enable control of the system theme depending on the time of day. (must be enabled auto brightness screen by GPS)
(NEW) In settings MOD - Settings Mod - System settings - Auto screen brightness by GPS - Day and night mode - you can specify it yourself Automatically, Always night, always day (must be disabled - Enable system theme control depending on the time of day)
Very, very many other fixes and additions (the firmware has been redone by 80 percent)
Video:
Possible problems :
The serial number is replaced by: Unknown or 1234
Solution :
To get your serial number, try:
1. Connect to Wi-Fi (you can create a WiFi hotspot in your phone and connect to it).
2. Make bluetooth pairing to your phone.
The serial number is generated by the MAC addresses of the WiFi and bluetooth modules.
3. Reboot after that the device 1 or 2 times!
You can reboot in the Settings Mod and click on the circle icon in the upper right corner. The reboot menu will appear.
Check if the serial number appears.
The Bluetooth application says that there is no license.
Solution :
1. Connect the device to WiFi to the WiFi access point of your phone, check whether the Internet is working on the device, for example, launch a browser and see if the Internet is working there.
2. Reboot. You can reboot in the Settings Mod and click on the circle icon in the upper right corner. The reboot menu will appear.
3. After rebooting, connect to the internet. Go to the bluetooth application and try to press the buttons there or click on the inscription where it is written that there is no activation.
Sound does not work or shows I2C error on every reboot
Solution :
Your DSP is incorrectly configured in the factory settings.
Go to Settings Mod - Settings related to the car - Engineering menu (password 0000)
and set up the DSP there.
My settings (you may have other settings !!!)
1. DSP Settings - Audio IC Type - BU37033 Series
2. Application Settings - Ess DSP or ROHM DSP
The work on the full version of the firmware mod is completed, the first release of version 1.0 is made. Please read the information under the spoiler "FULL Firmware Version Information:"
I ask you to excuse me in advance if I don’t often answer in the topic, since I’m physically not enough for all the time and I ask you to understand me! And we will help other users if you know the answers to questions!

Thanks @Malaysk. As Beta tester I am testing your ROM since some weeks on my Erisin (Leima MCU) and everything is fine!

Awesome. I have one of these units and very eager to test. However, I have some questions I hope a user can anser:
1. I have no original software for backup. Is it available somewhere in case this doesn't work?
MCU: S32F0_XinRC-18-W_20200812-09:08_HD1_7708_D_FF_C8
APP: PX5C_C54_HA1_Xrc2-10-EN_2020-06-05-1726
2. If I take the power off of it, will it remember equalizer sound settings?
3. I always get a popup that my usb device want access. I can check a box to remember the setting, but after each boot it asks again... Is this solved?
4. Steering wheel controls programmable?
Thanks.

Hi Everyone
I've got the MCU down here, but i can't understand what Firmware i have to install, first or second?
Thanks!

Installed... thank you for the great work you have done. I have a problem with my canbus (ft-ss-05) now not available in the settings and those available lack the functions. Why are there no canbus models compared to the original Rom?

Jarninho said:
Awesome. I have one of these units and very eager to test. However, I have some questions I hope a user can anser:
1. I have no original software for backup. Is it available somewhere in case this doesn't work?
MCU: S32F0_XinRC-18-W_20200812-09:08_HD1_7708_D_FF_C8
APP: PX5C_C54_HA1_Xrc2-10-EN_2020-06-05-1726
2. If I take the power off of it, will it remember equalizer sound settings?
3. I always get a popup that my usb device want access. I can check a box to remember the setting, but after each boot it asks again... Is this solved?
4. Steering wheel controls programmable?
Thanks.
Click to expand...
Click to collapse
I try to answer to your questions.
1) You need a "backup" only of the Android Part. The MCU is untouched by this ROM. You need the reinstall the original SW. I don't know if this is straight away, after the Custom ROM installation. In any case, Here you will find several original firmware, search for the one for you unit:
https://yadi.sk/d/lBxQipoetfkMLw
You can find also a thread here: https://4pda.ru/forum/index.php?showtopic=973677&st=0
2) If you remove the fixed +B, typically all the settings should be lost. I am not sure about the equalizer.
3) This happened also to me before I had installed the Malaysk ROM. It is a bug of the original FW. With the Malaysk ROM this issue is gone.
4) Only resistive for the moment, as the original FW one.

Installed, works amazing, I have only a big issue: using spotify, when i play next manually with swc (resistive) the song changes, but i have no audio, i need to press pause then play to get audio again... If the songs changes automatically after reaching the end no issue...

No one tested the ROM with YUNHT MCU?
What happen if i flash it? don't want to brick the unit

royalhawk2002 said:
I try to answer to your questions.
1) You need a "backup" only of the Android Part. The MCU is untouched by this ROM. You need the reinstall the original SW. I don't know if this is straight away, after the Custom ROM installation. In any case, Here you will find several original firmware, search for the one for you unit:
Click to expand...
Click to collapse
Thanks for all your help (and getting this organised).
Unfortunately I don’t see any xinrc roms there. But I’m too curious not to try. The confirmation checkbox for usb has been bugging me a lot.
I’ll try soon and report. Fingers crossed!

Great work! My unit has a 800x480 display, will the custom ROM work just as well?

Does this rom works with the same radio PX5 MCU S32F0 RK3368 with Android 10?

ilciumbia said:
Great work! My unit has a 800x480 display, will the custom ROM work just as well?
Click to expand...
Click to collapse
I don't think that the display will be correct, it works well at a resolution of 1024X600
lucktechnician said:
Does this rom works with the same radio PX5 MCU S32F0 RK3368 with Android 10?
Click to expand...
Click to collapse
You have installed, I think a fake 10 android, in fact it's 9 android.
DarkJackal87 said:
No one tested the ROM with YUNHT MCU?
What happen if i flash it? don't want to brick the unit
Click to expand...
Click to collapse
Very many different MCUs from different manufacturers! We need to check.

Hi Malaysk,
Thanks for the reply! so i shall wait? It's my only head unit so i really don't want to risk to brick it

post out of topic

Which one will work for me?

Malaysk said:
I don't think that the display will be correct, it works well at a resolution of 1024X600
Click to expand...
Click to collapse
Rats! Is there a way to backup my current firmware so that if anything goes wrong I can go back?

did some testing today. Fcc launcher works. I miss the nice volume bar of the old roms. Where can I setup the delay for sleep mode? .Radio will not turn off.

uvs1313de said:
did some testing today. Fcc launcher works. I miss the nice volume bar of the old roms. Where can I setup the delay for sleep mode? .Radio will not turn off.
Click to expand...
Click to collapse
These radio works differently from MCU MTCD based one with regards to the sleep philosophy. The are going in stand by and they will completely switch off only when the car battery goes under 12 volt. This is done to have a fast boot
Inviato dal mio SM-N970F utilizzando Tapatalk

really a great job installed without problems everything much smoother and faster I was wondering if it was possible an automatic dark mode on the whole system as it happens on smartphones for all apps to solve the problem of reflections in the car the apps would be more visible thanks a lot of compliments

Hi,
"DEMO VERSION" is still displayed after installing the software How do I remove it?