Database Users

[GUIDE][ROOT] Sim Unlock S7/S7 Edge

This guide is for those of us that have devices that have been updated to the new bootloader 4 firmware which prevents downgrading to a firmware compatable with most sim unlocking tools. Firmware versions that suffer this include PH7, PJ2 or PK1 for s7 and s7e (s7e=edge for purpose of this guide, s7=g930x, s7e=g935x).
This method was used personally and tested using a sprint s7 g930p on PJ2 firmware. Your mileage may vary
This involves rooting and will trip warranty status flag. If you have another rooting method different from this thread that wont void warranty or trip KNOX please use that instead.
After this guide you can use a unlocking method of your choice a few that work will be outlined later and also a few to avoid. I also recommend having a copy of your stock rom in case anything goes wrong.
Part A: Setup
1.) Download Root_S7.zip from the bottom of this post, extract the files so that you have the folder Root_S7 with files inside it.
Copy this folder to the root of your phones internal storage and leave a copy on your PC also so you can run(double click) Root_S7.bat in the later step.
2.) Download and setup Package Disabler and use it to disable the following: (should be about 5 apps total. This step not 100 percent necessary but I found it made things easier)
Anything that says Knox
Anything DM (all of them)
SecurityLogAgent
3.) Go to Settings>About Device> and tap "Build Number" 7 times to enable "Developer Menu" then enable "USB Debugging" and "OEM unlock" in the Developer Menu.
4.) Power off the phone completely, now hold Home and Volume-(down), keep them pressed and power the phone on.
5.) Press Volume+(up) when prompted to enter "Downloading Mode"
6.) Connect USB and wait for all drivers to finish installing on PC.
7.) Download SM-G930x_Engineering_BOOT.tar.md5 or SM-G935x_Engineering_BOOT.tar.md5 (choose correct file for S7 or S7e).
8.) Open Odin3 (Run as administrator), then select the above file in "AP" slot, then press START on Odin3, the file will be flashed.
9.) keep phone connected to PC as soon as the system identifies the device Double click "Root_S7.bat that is inside Root_S7 folder that you extracted on your PC. After the phone reboots automatically it is rooted. (it may take a couple tries due to the phone bootlooping, once successful SuperSU will be installed)
10.) Open SuperSU app and go to its settings>Access> and change it from "Prompt" to "Grant". After you have changed this setting the phone should only reboot 1 more time.
11.) Proceed to unlocking
NOTE: If SuperSU prompts "update su binary" you need to run the Root_S7.bat again, and/also check that you have copied Root_S7 folder with exact same name and location as the picture below. Do not use the SuperSU from playstore use the one included in the zip.
You can now unlock using idoneapps or you can PM grsjohn.
After unlock I suggest reflashing stock rom to remove root and restore functionality.
Part B: If you decide to pm Mr. grsjohn.
1.) On a windows machine download and install TeamViewer 11 and Usb redirector
2.)In Teamviewer click extras>options>advanced>show advanced>install VPN driver (its close to the bottom)
3.)Contact Mr. grsjohn. Prepare to donate because Mr. grsjohn is awesome and is doing this with his own resources and free time. :fingers-crossed:
Thanks to and beers for
colormedroid For Root Thread here.
grsjohn for sim unlocking. :highfive: And gets my endorsement.
idoneapps for guide and root zip here.
Note: I Bulletbeef am in no way associated with idoneapps.com or any other entity. I was in the situation that this guide addresses and thought it a nice thing if everyone could have the information consolidated and in an easy to follow guide. I WILL NOT BE HELD RESPONSIBLE FOR PHONE BRICKS, LIMBS STUCK IN TOASTERS OR THE DELAY OF HALF LIFE 3.
Downloads: (Mirrors welcomed)
Mega

Useful Links
Useful links will be posted here:
Samsung Galaxy S7 (SM-G930P) Root & Xposed Framework install Without Voiding Warranty
SM-G930P Root - Updated 10/25/2016

Unlocking methods and services suggestions.
Unlocking suggestions will go here:
Unlockbase Cable - Confirmed works up to bootloader 3 on s7, great refund policy.
idoneapps - Should work
Sammobile - should work on bootloader 4 with root, great refund policy.

s7 tmobile not supported ..

This process doesn’t always work first time.

grsjohn said:
T-mobile phones usually have unlock app, this models can be unlocked by code wity this app, only if phone is eligible for unlock
Click to expand...
Click to collapse
if it is not eligible then how to unlock..?

grsjohn said:
T-mobile phones usually have unlock app, this models can be unlocked by code wity this app, only if phone is eligible for unlock
Click to expand...
Click to collapse
If I load some other carriers firmware will it be possible?

grsjohn said:
bad idea, on t-mobile phones you must flash only firmwares made for it
Click to expand...
Click to collapse
right now i m have u firmware

Will this unlock a straight talk s7, I think firmware is ph4?

Help me
I have SM-G930T and even with the unlocking password I got from the simdoctor site, I can not unlock. Can someone help me?

tmobile need to be unlocked via app..!!
---------- Post added at 08:03 PM ---------- Previous post was at 08:02 PM ----------
diegosantospt said:
I have SM-G930T and even with the unlocking password I got from the simdoctor site, I can not unlock. Can someone help me?
Click to expand...
Click to collapse
tmobile need to be unlocked via app..!!

Will this method work for Sprint locked SM-G935P?
Please someone get back to me asap

Anyone try it to get a free unlock codefrom askunlock.net....is not exactly free, is a win win situation, but I dont know what to say...

hi.
I have galaxy S7 locked to unknown canadian network.
can i use this guide to unlock it ?

Bump
daveyaz said:
hi.
I have galaxy S7 locked to unknown canadian network.
can i use this guide to unlock it ?
Click to expand...
Click to collapse
Any idea [email protected]#$#@!

hello, iam owner of SG7 (SM-G930F), i followed the steps described above and my phone now is dead, i can't enter into download mode (odin Mode) it only display the
message "Exception: do_handler_sync: UNKNOWN (0x2000000) pc: 0x88144000 Ir: 0x8f0009318 sp: 0x0f10ff50".

justhyno_ said:
hello, iam owner of SG7 (SM-G930F), i followed the steps described above and my phone now is dead, i can't enter into download mode (odin Mode) it only display the
message "Exception: do_handler_sync: UNKNOWN (0x2000000) pc: 0x88144000 Ir: 0x8f0009318 sp: 0x0f10ff50".
Click to expand...
Click to collapse
i fixed my trouble using an older odin.

I have use SM-G935x_Engineering_BOOT.tar.md5 this file ,after reboot it will none stop to reboot
what should I do?
i use G935V

930AZ running 930U (ATT), sent my phone into bootloop.

Mr William
Hi i have a Samsung S7 edge and when i phone out it said that you not register on network had replace the sim and did factory reset and update and clear cashme but still the same had use the phone for 6 months and when i woke up and want to phone i got that???

Samsung Note 4 (SM-N910F) ROOTING

Hi there.
im from south africa and wonder if this is the reason for my rooting problems????
i have tried every which way to root my Note 4 and have gotten nowhere very quickly.
the note 4 is my upgrade from the Note 3 which i rooted successfully.
On youtube there are all various methods to root Note 4 but none have been successful and i must have tried every single one of them.
Here are my phones basics and i would be grateful if anybody can give me a detailed method
for rooting. Please note im dumb with technical stuff so i follow instructions to the letter...
As a noobie in all this, any info you require that i missed out below, please ask
SM-N910F
Version
6.0.1.
Security Patch
1 Aug 2016
Baseband
N910FXXU1DPE3
BUILD NUMBER
MMB29M.N910FXXS1DPH6
SECURITY SOFTWARE
MDF v2.0 Release 6
VPN v1.4 release 6.0
KNOX VERSION
KNOX 2.6

kwelio said:
Hi there.
im from south africa and wonder if this is the reason for my rooting problems????
i have tried every which way to root my Note 4 and have gotten nowhere very quickly.
the note 4 is my upgrade from the Note 3 which i rooted successfully.
On youtube there are all various methods to root Note 4 but none have been successful and i must have tried every single one of them.
Here are my phones basics and i would be grateful if anybody can give me a detailed method
for rooting. Please note im dumb with technical stuff so i follow instructions to the letter...
As a noobie in all this, any info you require that i missed out below, please ask
SM-N910F
Version
6.0.1.
Security Patch
1 Aug 2016
Baseband
N910FXXU1DPE3
BUILD NUMBER
MMB29M.N910FXXS1DPH6
SECURITY SOFTWARE
MDF v2.0 Release 6
VPN v1.4 release 6.0
KNOX VERSION
KNOX 2.6
Click to expand...
Click to collapse
This is universal method works 100%.
1,Flash twrp recovery in odin ( uncheck auto reboot in odin options )
2,once odin says PASS take battery off and insert again.
3, boot into twrp by pressing 3 button combo ( volume up+home+power all together once you see revovery booting on left top corner let go all buttons.
3,once booted into twrp go to install and flash supersu.zip .
Thats it.
Your device may reboot twice but dont freak out its normal just let it boot completly.
Twrp for N910F download link.
https://dl.twrp.me/trltexx/twrp-3.0.2-0-trltexx.img.tar.html
Supersu.zip systemless latest download link.
https://download.chainfire.eu/696/supersu/
Disclaimer- try on your own risk i am not responsible for and damage of your device rooting is always risky method so please dont blame me if anything goes wrong.
I am only here to help.
Hit thanks button if this is useful for you.

Trex888 said:
This is universal method works 100%
Click to expand...
Click to collapse
Not work for me. Fresh install stock n910f, TWRP from link abowe, full wipe (works and boot ok). But after installing SuperrSU system stuck on Galaxy Note 4 logo with blue LED enabled.

QVA said:
Not work for me. Fresh install stock n910f, TWRP from link abowe, full wipe (works and boot ok). But after installing SuperrSU system stuck on Galaxy Note 4 logo with blue LED enabled.
Click to expand...
Click to collapse
Don't bother with Super SU anymore. Follow the instructions to install TWRP via Odin then reboot to TWRP and flash the latest Magisk which you can find here on XDA, along with complete instructions for how to flash & use it.

Samsung Galaxy J3 SM-S320VL need this rooted

Hi,
i need to get this phone rooted please, no root apps works, @Chainfire maybe can help?

Any one be able to help if this can be rooted?

xxmcvapourxx said:
Any one be able to help if this can be rooted?
Click to expand...
Click to collapse
Here we go. This is for S320VLUDU2API3 firmware, but probably works on any revision 2 firmware.
KNOX should remain 0x0
Instructions
1. Enable OEM UNLOCK
In Settings>About>Software info tap the build number 7 times to enable developer options. Once you've enabled developer options, developer options will appear in settings just above the About device option. Open developer options, the 4th or 5th option should be “OEM Unlock”. Turn on.
2. Flash the eng boot image.
This is a special boot image normally used by engineers, it allows selinux to be booted in permissive mode with relaxed root restrictions.
Do not replace this image with the stock image after rooting your device or you will possibly soft brick your device.
(See below for how to recover)
ENG_BOOT_S320VL_API3
3. Install boot image:
Download Odin v3.11.1
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the ENG_BOOT_S320VL_API3.tar to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait few minutes
Reboot
Check in Settings>About>Software, your device should be in Selinux permissive mode.
4. Install and run Kingroot:
https://forum.xda-developers.com/android/apps-games/one-click-root-tool-android-2-x-5-0-t3107461
Make sure you have an internet connection.
You may need to run Kingroot several times to gain successful root.
5. Install and run SuperSU me to remove Kingroot and convert to SuperSU (not required) :
https://play.google.com/store/apps/...ore&pcampaignid=APPU_1_uzPDVbGyFcGNyATHrqmoCA
6. Wifi fix:
modify the line below in /system/build.prop:
ro.securestorage.support=true to false
Recovering from a soft brick:
Flash the stock firmware provided below wirh ODIN
https://firmwarefile.com/samsung-sm-s320vl
Good luck I hope it works for you.
.

ashyx said:
Here we go. This is for S320VLUDU2API3 firmware, but probably works on any revision 2 firmware.
Instructions
1. Enable OEM UNLOCK
In Settings>About>Software info tap the build number 7 times to enable developer options. Once you've enabled developer options, developer options will appear in settings just above the About device option. Open developer options, the 4th or 5th option should be “OEM Unlock”. Turn on.
2. Flash the eng boot image.
This is a special boot image normally used by engineers, it allows selinux to be booted in permissive mode with relaxed root restrictions.
Do not replace this image with the stock image after rooting your device or you will possibly soft brick your device.
(See below for how to recover)
ENG_BOOT_S320VL_API3
3. Install boot image:
Download Odin v3.11.1
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the ENG_BOOT_S320VL_API3.tar to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait few minutes
Reboot
Check in Settings>About>Software, your device should be in Selinux permissive mode.
4. Install and run Kingroot:
https://forum.xda-developers.com/android/apps-games/one-click-root-tool-android-2-x-5-0-t3107461
Make sure you have an internet connection.
You may need to run Kingroot several times to gain successful root.
5. Install and run SuperSU me to remove Kingroot and convert to SuperSU (not required) :
https://play.google.com/store/apps/...ore&pcampaignid=APPU_1_uzPDVbGyFcGNyATHrqmoCA
6. Wifi fix:
modify the line below in /system/build.prop:
ro.securestorage.support=true to false
Recovering from a soft brick:
Flash the stock firmware provided below wirh ODIN
https://firmwarefile.com/samsung-sm-s320vl
Good luck I hope it works for you.
.
Click to expand...
Click to collapse
Hi quick question ,
i've done steps 1-3 worked fine - http://pastebin.com/raw/PbA49d0q
my next question cant i get a custom twrp to root it or custom rom cause kingaroot not working properly.

xxmcvapourxx said:
Hi quick question ,
i've done steps 1-3 worked fine - http://pastebin.com/raw/PbA49d0q
my next question cant i get a custom twrp to root it or custom rom cause kingaroot not working properly.
Click to expand...
Click to collapse
Unfortunately you can't install custom recovery on this device. This device has a locked bootloader.
What issues are you reporting, did you manage to gain root?

ashyx said:
Unfortunately you can't install custom recovery on this device. This device has a locked bootloader.
What issues are you reporting, did you manage to gain root?
Click to expand...
Click to collapse
when trying to root
By Kin9Root Won Chu chu in a few ROot failure 'not yet suitable ˉ a - condolence ˉ ˉ a ˉ a "` ` One by one - one 'one one '- one - the
i get i've tried the pc version and the apk a few tries i keep getting notifications in the settings it is set to permissive

ashyx said:
Unfortunately you can't install custom recovery on this device. This device has a locked bootloader.
What issues are you reporting, did you manage to gain root?
Click to expand...
Click to collapse
i keep getting stuck on this : https://s4.postimg.org/mxi70k1vx/Image3.png
figured it out -- it was the pin we just trying super me

xxmcvapourxx said:
i keep getting stuck on this : https://s4.postimg.org/mxi70k1vx/Image3.png
ok I tried 3 different cords, various lengths, and now no matter what I get this screen only
Click to expand...
Click to collapse
You're using the desktop version, please download and use the android English apk:
http://www.apkmirror.com/apk/kingro...-release/kingroot-5-0-5-android-apk-download/
.

Is there an update on this, did anyone achieve root?
.

ashyx said:
Is there an update on this, did anyone achieve root?
.
Click to expand...
Click to collapse
Hi,
Just update :
used the bootimge via odin works fine.
Installed kingaroot via app root takes a few times.
Superme (legit) brought removes kingaroot and installs super su and binaries then reboots <---- here i lose root again i have to use kingaroot sometimes it auto reboots it self.
My friend also has the same phone do you have skype or telegram so we can chat private

xxmcvapourxx said:
Hi,
Just update :
used the bootimge via odin works fine.
Installed kingaroot via app root takes a few times.
Superme (legit) brought removes kingaroot and installs super su and binaries then reboots <---- here i lose root again i have to use kingaroot sometimes it auto reboots it self.
My friend also has the same phone do you have skype or telegram so we can chat private
Click to expand...
Click to collapse
Does it reboot itself as soon as SuperSU me installs supersu? That's probably the reason for root not sticking.
You could try the script below, I have confirmation it still works for the same procedure.
Steps 3 to 12.
https://forum.xda-developers.com/ga...ide-how-to-root-tripping-knox-kitkat-t3129484
Obviously use updated apps and don't flash the boot partition.
You will also need to flash the system version of SuperSU not EverRoot.
When you get to step 12, don't flash the firmware.
Disable EverRoot and just flash this:
https://forum.xda-developers.com/apps/supersu/v2-64-2-66-supersu-mode-t3286120
That should give you permanent root.
Sorry, but I don't use any of those apps you posted.

ashyx said:
Does it reboot itself as soon as SuperSU me installs supersu? That's probably the reason for root not sticking.
You could try the script below, I have confirmation it still works for the same procedure.
Steps 3 to 12.
https://forum.xda-developers.com/ga...ide-how-to-root-tripping-knox-kitkat-t3129484
Obviously use updated apps and don't flash the boot partition.
You will also need to flash the system version of SuperSU not EverRoot.
When you get to step 12, don't flash the firmware.
Disable EverRoot and just flash this:
https://forum.xda-developers.com/apps/supersu/v2-64-2-66-supersu-mode-t3286120
That should give you permanent root.
Sorry, but I don't use any of those apps you posted.
Click to expand...
Click to collapse
Yes as soon as super su me installs ask to install binaries ans ask to reboot it will lose root.
I will try the script without flashing firmware
Thank you ill let you know how i get on

ashyx said:
Does it reboot itself as soon as SuperSU me installs supersu? That's probably the reason for root not sticking.
You could try the script below, I have confirmation it still works for the same procedure.
Steps 3 to 12.
https://forum.xda-developers.com/ga...ide-how-to-root-tripping-knox-kitkat-t3129484
Obviously use updated apps and don't flash the boot partition.
You will also need to flash the system version of SuperSU not EverRoot.
When you get to step 12, don't flash the firmware.
Disable EverRoot and just flash this:
https://forum.xda-developers.com/apps/supersu/v2-64-2-66-supersu-mode-t3286120
That should give you permanent root.
Sorry, but I don't use any of those apps you posted.
Click to expand...
Click to collapse
My friend done a tutorial what he did on the process when losing root he followed your first guide http://pastebin.com/raw/ZSZExWt6

xxmcvapourxx said:
My friend done a tutorial what he did on the process when losing root he followed your first guide http://pastebin.com/raw/ZSZExWt6
Click to expand...
Click to collapse
It's not related to the bootloader, the bootloader is still locked, it's simply an incomplete installation of SuperSU. Probably due to permissions.
Follow the guide posted above and you should be good. I'd also suggest using root package disabler to disable knox.
Hit search in the app and type knox. Disable all knox related files.
https://play.google.com/store/apps/details?id=com.kunkunsoft.rootpackagedisablerfree
.

So can anybody confirm where we're up to with this. Has root been achieved? Are we good to post this as a viable root solution?

ashyx said:
So can anybody confirm where we're up to with this. Has root been achieved? Are we good to post this as a viable root solution?
Click to expand...
Click to collapse
Hi,
still not rooting perm -- Followed the exact tutorial you have gave us , me and my friend and we both lost root.
stock > odin > kingroot apk > supersu me > flashfire > supersu-sytemmode.2.79 rebooted lost root.
the only way we can do this is not to ever reboot....to keep root

xxmcvapourxx said:
Hi,
still not rooting perm -- Followed the exact tutorial you have gave us , me and my friend and we both lost root.
stock > odin > kingroot apk > supersu me > flashfire > supersu-sytemmode.2.79 rebooted lost root.
the only way we can do this is not to ever reboot....to keep root
Click to expand...
Click to collapse
So even when flashing root with Flashfire still losing root? Did you try using the script posted above?
Also could you post a screenshot of Root validator after losing root?
I would also suggest flashing the stock firmware with FLASHFIRE.
Ensure to Uncheck the boot partition and disable EverRoot.
Add the system supersu zip to the install.
It may be remnants of Kingroot causing the issue. Flashing this way will ensure a clean system with just supersu.

Having the same problem
I can't even do the OEM unlock and wondering if Knox is stopping me from doing it. Kingroot gets to about 77% before giving up. Also tried "one click root" and "odin" and a couple of others. Tried to uninstall Knox with many different aps but noway will it let me. I bought this J3 in HongKong and it is full of crap and adds that pop up and cover the whole screen. I have had some negative affects on the phone with all the playing around I've done to the point where when I hold down the buttons (power volume etc) the phone just goes into its first normal boot screen and stays there. Hope I haven't hijacked the thread but thought I may have the same problem as the original thread poster

stanfox said:
I can't even do the OEM unlock and wondering if Knox is stopping me from doing it. Kingroot gets to about 77% before giving up. Also tried "one click root" and "odin" and a couple of others. Tried to uninstall Knox with many different aps but noway will it let me. I bought this J3 in HongKong and it is full of crap and adds that pop up and cover the whole screen. I have had some negative affects on the phone with all the playing around I've done to the point where when I hold down the buttons (power volume etc) the phone just goes into its first normal boot screen and stays there. Hope I haven't hijacked the thread but thought I may have the same problem as the original thread poster
Click to expand...
Click to collapse
Why can't you enable OEM unlock? Remove any pin/password from the device first.

ashyx said:
Why can't you enable OEM unlock? Remove any pin/password from the device first.
Click to expand...
Click to collapse
I was surprised at first when you directed me to this thread ashyx, the first word I saw was Kingroot and I was sure a dev such as yourself wouldn't use that.
I write against Kingroot all the time. It is information stealing malware that doesn't even give true root, packs PUPs, and sends IMEI and other info to China upon install (check the logcat).
And it's nortoriously hard to get rid of and replace with a different SU. From what I read above, true root hasnt' been achieved yet. Ive used KR a few times in the past, but never again. It used to be easier to replace KingUser w SuperSU. Not so much anymore.
Please folks, Kingroot IS NOT actual root ; please quit posting about it in a true professional developer site.
Ahyx, PM me if you wish. I'd like to work on any methods other than this. I can get the bootloader unlocked from Net 10. But not until having it hooked up w/ lthem for a year. I've already chosen to disconnect this device anyhow because I can't stand using a non-rooted phone. Too bad, it's a good machine. I got a great buy on it. $50US brand new. Same store today $99. WalMart = $120
I just bought an LG G3 for $45. Verizon model, interesting root. I had to downgrade firmware to achieve root. It's TWRPd, and running Dirty Unicorns 10.6, a nice rom, better once I mod it.
Tried the latest RR rom for it. Nougat was cool, but too early, too many bugs.

S6 Edge+ SM-G928A Root [Q]

HI Everyone ,
I have been trying for a while to Root the device, no hope yet.
I'll let you know what I have tried so far, also I wanted to include some refrences "new here, sorry"
First off I tried with Z3X "Samsung Tool Pro"
to do anything on it but flashing stock Rom not gonna work without Rooting.
the app actually roots some devices automatically and for sure mine is not included
so I tried to manualy root it using other methods:
1- normal well known way flashing auto root file using "Odin3" flashing auto root file downloaded through "chainfire" same issue auto root file is not there.
2- downloaded and installed one click root "website uses just the name, easily found on google" that one is so easy to use!
* just enable debugging mode, connect the phone and click Root. (no Root available now)
3- Downloaded and installed kingOroot "website uses just the name, easily found on google" same steps exactly. and same issue
4- Flashing TWRP;
Download TWRP for S6 edge plus: (I mean Compatible)
dl.twrp.me/zenlte for me flashing fails.
also made sure that OEM is enabled and track phone is diabled.
and definitely USB Debugging mode also enabled.
I've tried some other files "G928A_Root.md5, twrp-3.0.0-0-zenlte-zenlte.img.tar, CF-Auto-Root-zenlte-zenlteub-smg928g.tar.md5, CF-Auto-Root-zenltekx-zenltekx-smg928n0.tar.md5 " also no luck at all.
kinda stuck here and need help

Aladdin91 said:
HI Everyone ,
I have been trying for a while to Root the device, no hope yet.
I'll let you know what I have tried so far, also I wanted to include some refrences "new here, sorry"
First off I tried with Z3X "Samsung Tool Pro"
to do anything on it but flashing stock Rom not gonna work without Rooting.
the app actually roots some devices automatically and for sure mine is not included
so I tried to manualy root it using other methods:
1- normal well known way flashing auto root file using "Odin3" flashing auto root file downloaded through "chainfire" same issue auto root file is not there.
2- downloaded and installed one click root "website uses just the name, easily found on google" that one is so easy to use!
* just enable debugging mode, connect the phone and click Root. (no Root available now)
3- Downloaded and installed kingOroot "website uses just the name, easily found on google" same steps exactly. and same issue
4- Flashing TWRP;
Download TWRP for S6 edge plus: (I mean Compatible)
dl.twrp.me/zenlte for me flashing fails.
also made sure that OEM is enabled and track phone is diabled.
and definitely USB Debugging mode also enabled.
I've tried some other files "G928A_Root.md5, twrp-3.0.0-0-zenlte-zenlte.img.tar, CF-Auto-Root-zenlte-zenlteub-smg928g.tar.md5, CF-Auto-Root-zenltekx-zenltekx-smg928n0.tar.md5 " also no luck at all.
kinda stuck here and need help
Click to expand...
Click to collapse
change the version of twrp?you can download"official twrp app",then choose your device type, it will show the last compatible version for your phone

Is TWRP installed or not? if so, theres a nougat supersu root without kernel install for s6e+

Find any way?

Anyone??!!??
Any updates on this? I've done all the above that op has done as well before stumbling on this post. twrp doesnt have an exact flash for g928a at&t version. only thing that popped up recently is some guy on youtube showing he did it but thats it for his 2 minute video no description and no replies in comments. hoping someone is willing to spill the goods for this specific device to root. Thanks in advance

root SM-G975F

i know there are a few ways to root the S10+, now we are a half year futher and my question is; what is the easiest way to root the S10+???? because i can't get it done.....

Dont rkot you will regret it

Hi, you can root only if you own an Exynos model, check this first...
The easiest way is to root with magisk without twrp in my opinion, all instructions are in S10 Rom thread, it is the same for S10+. Remember that it will trip KNOX and you will not be able to use Samsung pay, all other apps as far as i know you can get work properly. For me SPay was not relevant, because it is not working in my country.
I have rooted my phone a month ago, installed AdAway and AfWall, some addition open sourse apps and i am totally happy with it=)

lambik333 said:
i know there are a few ways to root the S10+, now we are a half year futher and my question is; what is the easiest way to root the S10+???? because i can't get it done.....
Click to expand...
Click to collapse
I am stuck on canary Magisk not allowing me to patch the standard AP file I loaded onto my phone. It constantly spins "Checking for updates" and never lets me go to install and then patch the AP. Yes I have booted into recovery and erased al data and caches and checked that OEM unlock is greyed out and boot loader is unlocked.
https://imgur.com/lrZSjEm
[Imgur](https://i.imgur.com/lrZSjEm.jpg)
Sahmadsaab said:
Dont rkot you will regret it
Click to expand...
Click to collapse
What will we miss or why will we regret?

Issues rooting
Hey guys,
I am having issues rooting an S10 +, I used the guide to patch the AP file using magisk and then flashed it using odin, followed the rest of the guide to the letter.
Then once the device finally booted, it showed me the set up screen, then we back to the Samsung splash screen and had a a warning in red across the top of the screen that said "Only official binarys are allowed" and just kept on boot looping.
I then flashed the stock rom using odin, I have used the same process on an S10 without any issues.
Does anyone know where I may have gone wrong ?

AlienSexGod said:
I am stuck on canary Magisk not allowing me to patch the standard AP file I loaded onto my phone. It constantly spins "Checking for updates" and never lets me go to install and then patch the AP. Yes I have booted into recovery and erased al data and caches and checked that OEM unlock is greyed out and boot loader is unlocked.
https://imgur.com/lrZSjEm
[Imgur](https://i.imgur.com/lrZSjEm.jpg)
What will we miss or why will we regret?
Click to expand...
Click to collapse
Hi I'm having the same problem!
I found a solution because I wanted to restore the root of the device because I needed it