Related
Code:
/*
* Your (probably expired) warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
IMPORTANT INFORMATION
Hi all,
This ROM is in a very early development stage, so you can expect a lot of things broken.
Please don't expect to use this ROM as a daily driver.
What is working:
Audio (playback)
Bluetooth
Graphics
Camera - photo, video recording (w/out audio)
Sensors
RIL
GPS
Wifi
USB
Video playback (HW/SW)
What is not working:
Audio recording
Proximity & Orientation sensors
GPS
Camera may not start at times
System time issues (alarm might not work or start with a delay)
maybe yet something
Download:
AndroidFileHost
Installation order:
The installation below requires a repartition of the phone internal sdcard in order this ROM fit on /system partition. DO NOT proceed an installation if you are unsure what you're doing and how to deal with a possible consequencies.
before installation make sure you have a TWRP recovery
install chrono kernel (both ROM and the corresponding kernel are located in the same directory - see ROM link below)
reboot recovery
flash ReParted zip. This will wipe system, data and cache partitions!
install ROM
install chrono kernel again
*please note a possibly undesirable effect of the repartition: cache partition will be decreased to 15 MB and some ROMs that rely upon this partition won't boot. To restore original sdcard partition layout, flash stock 4.1.2 ROM (with PIT file).
Credits:
@SergeyL
@rINanDO
@AdrianDC
@3liteking148
@Meticulus
@Unjustified Dev
@golden-guy
@nieltg
@isaak
@NovaFusion
@TeamCanjica
LineageOS community
Google
Special Thanks:
@isaak, @enkflr, @Pdevo, @prometej-zg for donating this phone!
[*]@S.AMU for providing FTP-Server
Source code:
Manifest: LOS 16.0
Device tree: LOS 16.0,
Kernel: LOS 16.0
other repos
XDA:DevDB Information
LineageOS 16.0, ROM for the Samsung Galaxy S Advance I9070
Contributors
ChronoMonochrome
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.4.x
ROM Firmware Required: TWRP recovery 3.x
Version Information
Status: Alpha
Created 2018-12-31
Last Updated 2018-12-31
Reserved
Reserved
Wow, works better than Oreo
Srsly, little more tweaking and this is suitable for daily use
is it possible to implement these functions in the janice kernel?
github.com/pelya/android-keyboard-gadget
Gonna try it today in 5 hours maybe, use it for a day and give my feedback. thanks for keeping this phone alive. Also have u tried magisk with this rom? I will try it anyway but i just wanted to know.
Here is my feedback.
1- No space for flashing pico gapps so I guess we will have to use microG.
2- Random freezes that takes like a minute then locks the phone.
3-Sometimes, WiFi didn't work and I had to restart. When pressing the icon it flashes green then goes back to grey again.
4-Bluetooth isn't working at all ( not sure if it's only me or what because it never worked on LOS 15.1 too ).
5-GPS not working as well.
6-I hope you add HardwareKeys remap, navigation gestures and Traffic monitor, of course if you don't mind.
..
That's pretty much it. If you can fix the second and third problems, this ROM can be used as a daily driver.
Sent from my GT-I9070 using XDA Labs
Sorry for OT but, @ChronoMonochrome you considered working on PMOS for 9070?
It's nice idea and porting require talented people like you
https://wiki.postmarketos.org/wiki/Samsung_Galaxy_S_Advance_(samsung-i9070)
Bx16 said:
Sorry for OT but, @ChronoMonochrome you considered working on PMOS for 9070?
It's nice idea and porting require talented people like you
https://wiki.postmarketos.org/wiki/Samsung_Galaxy_S_Advance_(samsung-i9070)
Click to expand...
Click to collapse
Nice to see some efforts of developing custom ROMs here, but amount of non-working features scares me
I would rather stick updating some my older ROMs like UltimateROM (but no promises though).
Mainlining/forward porting work always comes handy, irrespective of whether one's interested to Android/Linux or GNU/Linux.
I cannot believe this device is still getting updates
excuse my rudeness but do u plan on updating this rom or should i lose hope ?
How do i install this room? I tried everything but always got or error 7 or infinite samsung screen without being able to go to recovery mode, so found myself going back to stock over and over again :/
DeathArcanaXIII said:
How do i install this room? I tried everything but always got or error 7 or infinite samsung screen without being able to go to recovery mode, so found myself going back to stock over and over again :/
Click to expand...
Click to collapse
You have to upgrade from 2.3 rom to a 4.2 rom first like this (if it didn't work, consider using this )in order to upgrade the bootloader then you can install this rom. But i wouldn't recommend this rom as its not stable. LOS 15.1 is far more stable for a daily driver.
Pie works great, but one (maybe silly) question...
Where to get GApps for this ROM?
.czarodziej said:
Pie works great, but one (maybe silly) question...
Where to get GApps for this ROM?
Click to expand...
Click to collapse
https://wiki.lineageos.org/gapps.html (you need GApps for ARM platform).
Does this ROM work on the Galaxy S gts7582? Would the developer of this ROM solve the 15.1 Lineageos bugs for the gts7582?
oseiasrodrigues0 said:
Does this ROM work on the Galaxy S gts7582? Would the developer of this ROM solve the 15.1 Lineageos bugs for the gts7582?
Click to expand...
Click to collapse
Provably not, they're completely different devices.
The dev need access to the device or at least a very very similar one to look at bugs properly so I guess no.
enkflr said:
Provably not, they're completely different devices.
The dev need access to the device or at least a very very similar one to look at bugs properly so I guess no.
Click to expand...
Click to collapse
Is that the gts7582 has lineageos 15 It initializes only does not work anything video, audio, etc. So I thought some dev could solve the bugs of this ROM. But thank you very much for the answer
I installed lineage os 16 on my s advance this is how it went:
1. Bluetooth kept crashing idk why but i uninstalled the bluetooth apk so it dosen't work at all
2. MicroG
It works fine i flashed it and it has signuature spoofing already on yay and it dosen't get stuck in the boot animation after restart
3. Kernel
Oh yeah overclocking is fun i overclocked the cpu to the max and it works amazing
4. Camera
Works but not video
Its ok but bluetooth sadly not working but idc
Its not my main phone anyway thankgod <3
LineageOS is a free, community built, aftermarket firmware distribution of Android 9.0 (Pie), which is designed to increase performance and reliability over stock Android for your device.
Code:
/*
* Your warranty is now void. Knox 0x1.
*
* We are not responsible for bricked devices, dead SD cards,
* lost data due to failed backups, etc, etc.
* flash at your own risk
*/
How to flash this ROM:
Download the zip file. (Make sure to download the file for your specific device)
Make sure this zip file is saved to your device (I prefer transferring to sd card to allow for full wipe of data on phone).
If you want Google Play functionality, download OpenGApps (link below). (optional)
Reboot into TWRP (latest version recommended)
Make a backup (optional).
Wipe System, Data, Cache, and Dalvik Cache partitions with Advanced Wipe. (I like wiping internal data too, do NOT wipe SD Card!)
Flash the ROM you just downloaded.
Flash OpenGApps for Android 9.0 if you want Google services (optional) (I prefer nano or pico).
If you want root, flash Magisk.
Reboot and proceed normally with installation.
Download links:
Official 16.0 coming out soon from actual developers.
OpenGApps 9.0 (I use pico): http://opengapps.org
Source code:
LineageOS on GitHub
jfuginay (forked from LineageOS, and rest of the developers mentioned in the following Credits) on Github
Credits:
The LineageOS Team
haggertk
Trader418
andr01dfr3ak
temasek
TheMuppets
Version Information:
ROM OS Version: Android 9.0 Pie
Known Bugs: not sure, needs testing, so you tell me. bluetooth calls may not be working
Please report bugs with logcat
Screenshots
Known bugs:
None reported yet, in testing.
Any meaningful reason why you're posting inofficial builds?
AFAIK you're not affiliated with us in any way. And you haven't done any work for shamu. So users reporting bugs to you is just a waste of their time, as you're not going to fix them.
You're just picking some very low hanging fruits.
There's really no need for them especially because we're shipping soon.
Also proper credits would have been nice.
I have a good friend with a shamu phone, he wanted to upgrade his phone so I helped him out. As of yet, I haven't seen any Lineage OS 16.0 ROMs so I spent all yesterday attempting to build one.
It finally completed with no errors, and that seems like a meaningful enough reason to post an unofficial build to me.
I don't own a shamu, and sorry if I left out credits where credit is due for people bringing shamu specific code up to pie, feel free to message me names and I'll include them in the credit section.
Jfuginay said:
I have a good friend with a shamu phone, he wanted to upgrade his phone so I helped him out. As of yet, I haven't seen any Lineage OS 16.0 ROMs so I spent all yesterday attempting to build one.
It finally completed with no errors, and that seems like a meaningful enough reason to post an unofficial build to me.
I don't own a shamu, and sorry if I left out credits where credit is due for people bringing shamu specific code up to pie, feel free to message me names and I'll include them in the credit section.
Click to expand...
Click to collapse
The reason why there are no unoffical builds is that we don't really want to have any for devices which are going to be supported officially.
I know that you had good intentions, but posting inofficial builds doesn't make it easier for us devs.
Elektroschmock said:
The reason why there are no unoffical builds is that we don't really want to have any for devices which are going to be supported officially.
I know that you had good intentions, but posting inofficial builds doesn't make it easier for us devs.
Click to expand...
Click to collapse
Alright, that makes sense. I wasn't aware shamu was going to be included in the devices receiving official Lineage 16.0 ROMs. I'll go ahead and remove the download link, and refer my friend to your signature to download ROMs for his phone.
Like I mentioned, I don't have a shamu, I'm on a Note 3 (hltetmo) and have been building my own LineageOS 16.0 (even though members of the official Lineage team such as Haggertk are building unofficial ROMs for my Note 3 too).
You're correct that my building hasn't included any actual fixing of bugs and getting those fixes submitted into official builds, but you have to start somewhere, right?
Jfuginay said:
Alright, that makes sense. I wasn't aware shamu was going to be included in the devices receiving official Lineage 16.0 ROMs. I'll go ahead and remove the download link, and refer my friend to your signature to download ROMs for his phone.
Like I mentioned, I don't have a shamu, I'm on a Note 3 (hltetmo) and have been building my own LineageOS 16.0 (even though members of the official Lineage team such as Haggertk are building unofficial ROMs for my Note 3 too).
You're correct that my building hasn't included any actual fixing of bugs and getting those fixes submitted into official builds, but you have to start somewhere, right?
Click to expand...
Click to collapse
Yes I know that haggert and others are distributing unofficial builds. What I meant is we are not to eager of unofficial builds of people not affiliated with us in any way.
It's always getting messy if 2-3 people post unofficial builds and users think they're using the real thing.
I'm always happy if someone wants to help, but without a test device it's going to be close to impossible for you to test anything properly.
Where is the download?
girkev said:
Where is the download?
Click to expand...
Click to collapse
Now that I post here - the link is above and below your post.
Elektroschmock said:
Now that I post here - the link is above and below your post.
Click to expand...
Click to collapse
Sorry don't see link
Here's ROM Lineage OS 16.0 with Android 9. It is so laggy, that it is impossible to use. If you want to modify it, here you go. Just download it at the link in below. If you have successfully repaired it, share to other people)))
Bug-list:
1.UI little bit laggy.
2.Sim-Card doesn't work in system.
3.Sound (media-server) is sometimes does not work.
4.Sound via bluetooth does not transmitting
5.You can't invert colors.
And many other bugs..
I hope, you make this rom usable))
Link with rom:
https://drive.google.com/file/d/1Fy2P5lgjIirKoD5CtEUMDs3hmlSxFBvv/view?usp=sharing
My LuisROM based on cdDroid V6.x for Xiaomi Redmi 4x (santoni)
Code:
*** Disclamer
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
This is my personal custom rom. LuisROM based on the crDroid, LineageOS and other...
This is a ROM that works on Xiaomi Redmi 4x (santoni) snapdrgon only! This ROM comes with a highly-customized kernel, as well as some other very custom modifications.
I will NOT provide support if you install a custom kernel!
Changelogs: http://luis-builds.de/downloads/lineageos/cr/Xiaomi_Redmi_4X_(santoni)/changelog_santoni.txt
Introduction
Hello Friends!
I had troubles to find current builds for my devices so I decided to make regular builds for my devices. When my friends told me about similar problems, I extended the builds to include their devices as well. So these builds were and are mainly for my friends and me, but I finally decided to provide them also for public download.
My ROMs
My LuisROM an awesome combination of performance, customization, power and the most new features, brought directly to your device. The LuisROM build server generates automaticly every 2nd days new builds directly from the sources.
Notice
Sometimes I get a lot of help or feature requests from users of my LuisROMs. My dog Luis and I try to fulfill most of the wishes, but that is not always possible. I do that as a little hobby and Luis does not always want to build ROMs . Please understand if I can not always answer directly.
ROM features:
Based on the latest cdDroid V6.x (Android 10), LineageOS and AOSP sources
Latest security patches and sources
OTA Updater
Compatible with EX Kernel Manager
Many other misc. performance and stability improvements under the hood
Kernel: Linux 3.18.x Kernel with many mods other devs and me (thanks for your incredible work!)
Removed lots of excessive bloat (improves security and performance)
Improved stability (several bugs not listed here have been fixed)
Boeffla Wakelock blocker driver V1.1.0
More I/O-Schedulers (fiops, sio, zen, maple)
Optimized for performance and battery life
Compatible with systemless root (recommend Magisk 20.x !!!)
Many other misc. improvements not listed here
Installation instructions:
Pre-installation:
OrangeFox Recovery of course (download here)
Tested with "V11.0.2.0.NAMMIXM" firmware. (download here)
Magisk 20.x and above (Link) can also be used just make sure you flash it after a first successful boot (after passed setup screen)
First time installation:
Unlock your bootloader
Install lates MIUI firmware (tested V11.0.2.0.NAMMIXM)
Flash recovery zip (TWRP)
Flash my latest LuisROM (download here)
Optional: Flash Open GApps and Magisk 20.x and above
Reboot and enjoy
OTA App update installation (auto):
Go to crDroid > About cdDroid > Updates
Press reload button (right corner)
Select download on the new build list
After download select update/flash new build
Optional: Installed gapps and magisk will be moved into new system automaticaly !
TWRP update installation (manual):
Download latest LuisROM build (download here)
Boot into Recovery TWRP
Flash my updated LuisROM (download here)
Reboot and enjoy
Download
Latest builds: (http://luis-builds.de/downloads/lineageos/cr/Xiaomi_Redmi_4X_(santoni)/)
Latest MIUI firmware: (download)
My other devices/ROMs: (http://luis-builds.de/downloads/lineageos/)
Download OpenGapps: (http://opengapps.org)
Flash latest OrangeFox Recovery: (download here)
Donate for my dog Luis, he is looking forward to an extra bone:
https://bw2.link/LuisDonation
Changelog
Developer: http://luis-builds.de/downloads/lineageos/cr/Xiaomi_Redmi_4X_(santoni)/changelog_santoni.txt
Known Issus
..
Telegram group:
https://t.me/rr_luisrom
Thanks To/Credits
Special thanks to Teams:
LineageOS team: https://www.lineageos.org
crDroid Team: https://crdroid.net/
OMNI team https://omnirom.org/about/
SLIMROMS https://slimroms.org/#/about
topjohnwu (Magisk) https://forum.xda-developers.com/apps/magisk
Thanks to the best devs on earth:
LuK1337 (https://forum.xda-developers.com/member.php?u=5075128)
PeterCxy (https://forum.xda-developers.com/member.php?u=5351691)
francokernel (https://forum.xda-developers.com/member.php?u=3292224)
sultanxda (https://forum.xda-developers.com/member.php?u=4800121)
flar2 (https://forum.xda-developers.com/member.php?u=4684315)
nathanchance (https://forum.xda-developers.com/member.php?u=6842057)
zx2c4 for the wireguard vpn ROM Integration (https://forum.xda-developers.com/android/development/wireguard-rom-integration-t3711635)
phhusson for some blobs (https://github.com/phhusson)
and of course to all the supporters.
Thanks for the Sources/Blobs/Tweaks
ProtoDump (https://github.com/LineageOS)
Omnirom (https://github.com/omnirom)
TheMuppets (https://github.com/TheMuppets)
ryan-andri (https://github.com/ryan-andri)
AliHasan7671 (https://github.com/AliHasan7671)
zeelog (https://github.com/zeelog)
My Sources/Blobs/Tweaks
DEVICE (https://github.com/FraEgg/android_device_xiaomi_santoni_ra)
KERNEL (https://github.com/FraEgg/android_kernel_xiaomi_msm8937)
XDA:DevDB Information
[ROM][SANTONI][10]LuisROM Android 10 based on crDroid V6.x, ROM for the Xiaomi Redmi 4X
Contributors
8224Freak
Source Code: https://github.com/FraEgg
ROM OS Version: Android 10
ROM Firmware Required: V11.0.2.0.NAMMIXM
Based On: LineageOS, crDroid, AOSP
Version Information
Status: Beta
Beta Release Date: 2020-03-24
Created 2020-03-24
Last Updated 2020-03-24
Reserved
Great rom. Only one bug, the speaker is silence unless the headphone is plugged.
crDroidAndroid-10.0-20200321-santoni-v6.4-LuisROM
is normal.
Stuck at fastboot...
Hello,
I've a little problem. I've used LuisROM RR for a long time. Now I want to switch to LuisROM CR.
I did a clean install with the newest crDroidAndroid-10.0-20200331-santoni-v6.4-LuisROM.zip, the newest FW and newest OrangeFox.
During the installation of the ROM, there was a message "Cannot mount the storage".
Now it reboots only into fastboot.
An installation with the old LuisROM RR works without a problem.
Any ideas?
Thx,
wayne
---------- Post added at 12:50 PM ---------- Previous post was at 12:38 PM ----------
OK.
The old version crDroidAndroid-10.0-20200215-santoni-v6.3-LuisROM-ota.zip works...
An the Upgrade from crDroidAndroid-10.0-20200215-santoni-v6.3-LuisROM-ota.zip to
crDroidAndroid-10.0-20200331-santoni-v6.4-LuisROM.zip didn't work, same problem, stuck at fastboot...
:crying:
Maybe you should clear the internal storge.
However, the newer roms have bugs.
@wayne5de try to install magisk after installing rom. The phone will start, but there will be no sound from the main speaker. The last working version is probably 20200319.
doopek said:
@wayne5de try to install magisk after installing rom. The phone will start, but there will be no sound from the main speaker. The last working version is probably 20200319.
Click to expand...
Click to collapse
What do you mean with "no sound". My phone rings, I can talk and hear the other person.
At the moment 20200215-santoni-v6.3-LuisROM is installed with magisk.
There have been some bug since a few versions, which results in the lack of sound from the main speaker. You don't hear ringtones or music. Calls are working correctly. If this speaker works for you, I will have to try the latest version again. This morning I tried dirty flashing and the sounds didn't work.
I also can verify that sounds does not come from the main speaker on a fresh install. Just tried it and work's from the main speaker only if headphones are plugged
In this latest version, the phone's sound does not work
@8224Freak there has been a problem with your builds for several versions.
After a dirty flash, the system boots up but there is no sound from the main speaker. The talk speaker works.
After clean flash the phone starts in fastboot mode. Installing magisk fixes startups but no sounds yet.
Logs attached after installation with recovery and already running system.
The last good is probably 20200319 or the first next.
Stuck on fastboot
When I flash and reboot my phone the phone got stuck in fastboot mode.
Please fix this issue
Thanks for rom,
crDroidAndroid-10.0-20200319-santoni-v6.4-LuisROM
but is slowly and I' reporting what doesn't work:
- for a dark colour scheme backround of phone calls is not dark
- why on upper belt is max 6 icon/shortcuts ? rest of roms usually has 8
- why system (990+149+121 +101+85 MB !) uses up 1446 MB of memory ?
- why system has up 31 aplications ? Roms has usually 22-26
- level of corrections to producer protection is very old, but from 01.10.2018 !?!?!
- system doesn't has advanced restart
When could You reparing ? I saw new version but could You cofirmed that is free of those bugs ?
Speaker not working.!?
(drive.google.com/file/d/1-svW-RFpG8YzFsan3U9iOuF0zbpHYW6E/view?usp=drivesdk) - remove brackets
(drive.google.com/file/d/1-sfP88RdHSvjs-3dx2QnLrz-WAxErQ8C/view?usp=drivesdk) also remove brackets (new member stuff, sorry)
I can't download it rom,gps does not catch well,only 3-5 satellites
Fixed: stuck on fastboot and no sound...
FYI:
These two problems are fixed: stuck on fastboot and no sound...:good:
I did a dirty flash from the old crDroidAndroid-10.0-20200215 to the newest crDroidAndroid-10.0-20200427.
Thx for your good work! :highfive:
No camera works...
With the newest update crDroidAndroid-10.0-20200504 no camera works... :crying:
wayne5de said:
With the newest update crDroidAndroid-10.0-20200504 no camera works... :crying:
Click to expand...
Click to collapse
But does the phone work well ?
Are there any other bugs?
Do you have the sound good now?
For the camera, I recommend 2 apk that I use:
https://play.google.com/store/apps/details?id=net.sourceforge.opencamera
https://play.google.com/store/apps/details?id=com.caddish_hedgehog.hedgecam2
As I said before: These two problems are fixed: stuck on fastboot and no sound...
I also use open camera, but this, the standard camera, HD-camera, ... didn't work!
After dirty flash (from build 20200429 to 20200501) my phone stuck on cr logo but after clean install everything is ok.
Same situation after dirty flash from build 20200501 to 20200504.
On 20200504 build ...... no camera (open camera, gcam) is working. Back to 20200501.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
Installation:
If you are on stock OS, you need a custom recovery first. You can get the recommended LineageOS recovery in the official installation instructions link below.
You can use TWRP for installation, however it is no longer officially supported since we do not have full control of its update cycle and potential issues.
Previous recommended TWRP image: twrp-3.2.3-20190209-kuntao.img
If you are coming from stock or other ROMs, you need to make a factory reset.
As always, make sure to backup before installing this ROM.
Detailed installation instructions:
Install LineageOS on kuntao
Detailed upgrade instructions from previous version:
Upgrade LineageOS on kuntao
Download link:
LineageOS Downloads
Recommended Google Apps package:
MindTheGapps (choose ARM64 11.0 zip)
Changelog:
Changes for kuntao
Bug reports:
How to submit a bug report
LineageOS GitLab
Donate to support development:
Donate via PayPal to mikeioannina
Donate via PayPal to LineageOS
Source Code:
https://github.com/LineageOS
ROM Firmware Required:
Any version of stock 6.0. Recommended P2a42_S251_171107_ROW
Builds will be available once next weekly build cycle starts.
https://review.lineageos.org/c/LineageOS/hudson/+/310339
As seeing the current development of our device. Can we see the android 12 rom in future if everything remains fine. Please don't mind just asking for the future to keep this device or sell it of.
Later edit - my error. Please ignore my post.
BUGS ?
sprite16 said:
Hi,
Can you check please, if your download link is for Lenovo P2 ?
I think is wrong...
Click to expand...
Click to collapse
The link given by Mike is OK.
sprite16 said:
Hi,
Can you check please, if your download link is for Lenovo P2 ?
I think is wrong...
View attachment 5330379
Click to expand...
Click to collapse
When You click on the link given by Mike You obtain the sreen here above, but chiron isn't kuntao.
You must then click in the left column on Lenovo to extend, then click on P2.
You will then see then the build 18.1 isn't still there.
cocopipou said:
The link given by Mike is OK.
When You click on the link given by Mike You obtain the sreen here above, but chiron isn't kuntao.
You must then click in the left column on Lenovo to extend, then click on P2.
You will then see then the build 18.1 isn't still there.
Click to expand...
Click to collapse
Ok, thanks !
Great news!
Our device is in the build queue
Build status - Build - LineageOS Changelog
This page is listing the official changes and downloads for LineageOS.
www.lineageoslog.com
Build is live now
https://mirrorbits.lineageos.org/full/kuntao/20210606/lineage-18.1-20210606-nightly-kuntao-signed.zip
For the moment, it's working fine, inclusive Android Auto.
Thanks Mike !
@mikeioannina fingerprint enrollment gets fails at last tried all fingers but still failed device is encrypted. But still fingerprint enrollment failed.
Thank you mikeionnina for keeping our devices up to date!
Quick question:
>ROM Firmware Required:
>Any version of stock 6.0. Recommended P2a42_S251_171107_ROW
I have only flashed roms since I bought the device a few years back. Should I flash the stock firmware at some point? And where can I find it?
garvit girotra said:
@mikeioannina fingerprint enrollment gets fails at last tried all fingers but still failed device is encrypted. But still fingerprint enrollment failed.
Click to expand...
Click to collapse
Try flashing Los 16.0, then wiping data, cache and dalvik and then flashing 18.1. Usually fixes this problem for me.
cocopipou said:
When You click on the link given by Mike You obtain the sreen here above, but chiron isn't kuntao.
You must then click in the left column on Lenovo to extend, then click on P2.
You will then see then the build 18.1 isn't still there.
Click to expand...
Click to collapse
There was a copy paste error in first post, I have fixed the link now to point at kuntao page
Currently reinstalling apps after a full wipe (System, data, cache, dalvik and "Format Data" TWRP option). No issues yet. And fingerprint enrollment worked for me.
It is unbelievable for me this phone gets "official" 5 major Android updates (the phone first released on Android 6). But here we are on Android 11. It can be done. Major thanks.
Bipo said:
I have only flashed roms since I bought the device a few years back. Should I flash the stock firmware at some point? And where can I find it?
Click to expand...
Click to collapse
It shouldn't be an issue. If you had the latest official ROM (& firmware) installed before running custom ROMs, it should work.
matias49 said:
It is unbelievable for me this phone gets "official" 5 major Android updates (the phone first released on Android 6). But here we are on Android 11. It can be done. Major thanks.
Click to expand...
Click to collapse
Thanks Mike for his attempts keeping our device alive. This phone is worth to be kept up to date.
OTOH, we have a device like LG G2 which is either older and inferior to P2 and is still being maintained by LOS developers. I hope P2 remains on the line as long as G2 will be.
Big thanks Mike so far everything seems to be working great.
Amazing work, thank you Mike!
Can i dirty flash this 18.1 on los 17.1 latest build. As fingerprint enrollment failed on 18.1 works in los 17.1 so switched to los 17.1. how can i dirty flash on los 17.1 also gapps need to flash separately or gapps from los 17.1 works fine ???