I have changed my CSC today by SamKey successfully. Just one Credit used.
My Note 20 Ultra was updated to Latest November Security patch.
But SamKey changed CSC in just 2 minutes ❤
Related
I have a german (DBT) Samsung Galaxy S7 Edge.
I flashed Nougat Beta 1 with Odin. CSC is atm G935FOXA1ZPK4
What is the best way to update to the final, if possible with keeping data?
I'm assuming you have no intentions to trip knox since you're only on beta 1, so custom flashing appears to be out of question.
You can flash via Odin one of two available official firmwares (BTU and O2C) at the time of this posting (note that this may break CSC features since your original is DBT) or wait out for official DBT release. Official firmwares can be checked on Sammobile.
Using Home_CSC in Odin would not wipe your data, however, that may mean you would have to wait for official DBT firmware to be on the correct CSC.
Last but not least, you can roll back to MM and wait for official OTA updates from your carrier. Its pretty much a waiting game on the official route.
I originally was on DBT, my CSC changed when i flashed Beta 1 BTU, because Beta 1 was also not available as DBT. After flashing Beta 1 my CSC showed OXA (see screenshot above).
In the meantime i flashed final BTU with Home_CSC. My CSC is now shown as G935FOXA1DPLT.
I will switch back to DBT, when final DBT is available. Is there a way to change to DBT without erasing data? I guess not.
Bierfreund said:
I originally was on DBT, my CSC changed when i flashed Beta 1 BTU, because Beta 1 was also not available as DBT. After flashing Beta 1 my CSC showed OXA (see screenshot above).
In the meantime i flashed final BTU with Home_CSC. My CSC is now shown as G935FOXA1DPLT.
I will switch back to DBT, when final DBT is available. Is there a way to change to DBT without erasing data? I guess not.
Click to expand...
Click to collapse
As long as you use Home_CSC you shouldn't lose data, so hopefully it'll be included later in the final DBT firmware.
Hello fellas,
I have just bought a brand new S8 dual sim, or SM-G950FD, made in Vietnam.
After inserting the 4g chip, the device rebooted and downloaded the config for my mobile operator, which appears to be the config for the F variant and not the FD (see attachments below).
It works fine, but the region ARO (Argentina unbranded) does not have a firmware for this model, and the security patch is from August 2017. So the question is, can I flash the stock version for the FD, region XXV (Vietnam unbranded)? Or is it better if I try ZTO (Brazil unbranded)?
Moderator from Sammobile said firmware from any region for this model should work, as long as the PDA and CSC contain FXX and OMX on their codes respectively.
Could you please help me out a little?
Thanks!
2nd attempt to add screenshots.
There is no need to flash anything if your phone is running ok. I have the duo in the UAE and it also shows only "F" not "FD".
I was getting security updates almost every month but not since August.
I need help guys. My s7 edge used to be on the United Kingdom/Ireland XEU firmware with the XEU CSC but recently I deep clean flashed the latest BTU firmware with the PIT file for re-partitioning. However, the Samsung Info app shows my active CSC is still XEU and for that I cannot receive OTA updates on my phone. I flashed the 12th March 2018 BTU firmware and recently a new OTA was available from the 28th March 2018 or somewhere on that date as Sammobile says. How do I go about getting the default BTU/OXA CSC on my phone???
I've been searching a way to change my S10+'s CSC code since I have received it in April but no methods worked out for me so far - the 272 + imei method (returns me UNKNOWN APPLICATION), flashing none OXM csc and back to the OXM multi csc etc (the none oxm csc works but returns back to XME when I flash XSA firmware).
Have purchased the phone from Malaysia (XME) and using in Australia (Needs it to be XSA)
S8 and S9 seems to have a method to change their CSC code but S10 has no working method for me.
I have already have rooted my S10+ long ago, any possible method to change CSC with root?
I have an unlocked Note 20 Ultra 5G SM-N986B on ThreeUK (H3G). I want to change the CTC to BTG so that I get the unbranded firmware and no ThreeUK software.
I downloaded the BTG firmware via Frija and installed with ODIN, following the instructions in this guide: https://forum.xda-developers.com/ga...to/ath3-official-stock-fw-updateodin-t4143909.
But its still on the same firmware and CTC.
Any help would be greatly appreciated.
I have the same issues, the flash is successful but CSC does not change
viw9419 said:
I have an unlocked Note 20 Ultra 5G SM-N986B on ThreeUK (H3G). I want to change the CTC to BTG so that I get the unbranded firmware and no ThreeUK software.
I downloaded the BTG firmware via Frija and installed with ODIN, following the instructions in this guide: https://forum.xda-developers.com/ga...to/ath3-official-stock-fw-updateodin-t4143909.
But its still on the same firmware and CTC.
Any help would be greatly appreciated.
Click to expand...
Click to collapse
Hey, did you find a solution for this? I have the same problem.
So i am trying to change the CSC of my Galaxy note 20 ultra from DTM to DBT or VD2 ... all of them are a part of OXM multi CSC firmware.
Flashed via ODIN using the right CSC file, and the flash was successful however the CSC did not change ... Tried multiple times and ended up with the same outcome.
Samkey still does not support N20 ultra !!!
I am running the latest firmware with August patches.
Security Patch Level 2020-08-01
Product code DTM - SM-N986B
PDA N986BXXU1ATH3
CSC N986BOXM1ATH3
Help will be highly appreciated.
karan malhotra said:
Hey, did you find a solution for this? I have the same problem.
So i am trying to change the CSC of my Galaxy note 20 ultra from DTM to DBT or VD2 ... all of them are a part of OXM multi CSC firmware.
Flashed via ODIN using the right CSC file, and the flash was successful however the CSC did not change ... Tried multiple times and ended up with the same outcome.
Samkey still does not support N20 ultra !!!
I am running the latest firmware with August patches.
Security Patch Level 2020-08-01
Product code DTM - SM-N986B
PDA N986BXXU1ATH3
CSC N986BOXM1ATH3
Help will be highly appreciated.
Click to expand...
Click to collapse
You can refer to this video https://www.youtube.com/watch?v=M2fEsTcqE4s
changing CSC starting at 1:45.