I am trying to change my Note 3 (SM-N900K) firmware but first when i try to flash the recovery after the flashing the recovery did not change what should i do?
Thank you
You must unlock the bootloader first!
are there any other application or an easier way to unlock bootloader without rooting?
I am not familiar with the n900k but using an app to unlock the bootloader if the bootloader is not locked will probably brick the phone.
Are you booting right into the custom recovery as soon as you flash it? If you flash recovery and just reboot to the rom, the stock recovery will overwrite the custom recovery.
I stupidly flashed a wrong file and lost access to twrp and root. But that is cool I got back ups etc because I was in the process of rebuilding anyway
Symptoms :
If I restart phone it'll get stuck on logo until
Fastboot continue
OS loads up but....
No root and no access to bootloader, can not fastboot flash recovery recovery. Img
Failed Device is locked
Cannot flash anything onto it seems I am locked out an unlocked then locked bootloader without root??
See attachments for more details
Is there a way out of this mess, lol what have I done :crying:
Just to clarify I have adb enabled, cmd promt and terminal have access to it under abd /fastboot devices = id, I just can't flash anything so is there another way to get root and install twrp if I can't flash?
Hi,
is it possible to relock the bootloader to original factory mode.
fastboot oem lock (will erase userdata)
Also you should restore the fbop partition: /dev/block/bootdevice/by-name/fbop
For more reference see:
https://forum.xda-developers.com/axon-7/help/lock-unlocked-bootloader-t3444044
https://forum.xda-developers.com/showpost.php?p=68738854&postcount=100
Also please don't open a thread to a question that has already been answered several times.
After i unlocked bootloader my phone now is recognized as A2017U. When i relock it will it then recognized as original A2017G ?
I am interested in a tutorial about going back to stock for G model
The procedure for the g model is no different than the U model except you have to revert the bootloader (fbop partition) because the european model is quite restricted.
For making a tutorial I would need to know exactly what you modified.
There are already good step by step guides in this forum. All I could offer you are my backup files for the recovery and bootloader for the 2017G with update B08.
Bomberus said:
The procedure for the g model is no different than the U model except you have to revert the bootloader (fbop partition) because the european model is quite restricted.
For making a tutorial I would need to know exactly what you modified.
There are already good step by step guides in this forum. All I could offer you are my backup files for the recovery and bootloader for the 2017G with update B08.
Click to expand...
Click to collapse
At the moment i am on B09 rooted but I installed it via TWRP using DrakenFx's tutorial from here : https://forum.xda-developers.com/showpost.php?p=68873485&postcount=3
Futhermore when I unlocked the bootloader I was on B03 and I saved the aboot.img and fbop_lock.img .
Now I would like to go back to fully stock to prepare for the android N update.
I would highly appreciate it if you could offer me some directions for this matter.
Never tried this method (so I take no responsibility) but in order to receive ota you need an unmodified system with locked bootloader.
To lock your bootloader:
First backup all your apps, data and internal sdcard !
Connect your phone to a PC and start adb:
Type: "adb reboot bootloader"
Phone will restart: (if you are on linux, run fastboot with root permission)
Type: "fastboot oem device-info" (just to check things)
"fastboot oem lock" (will lock your bootloader)
According to DrakenFX you should have the stock recovery already installed. So you can flash a sd card upgrade from ZTE "http://www.ztedevice.com/support/detail?id=98CEB24F9FFD433EA99EC424163149A6" (to bring you back to stock)
If you still have TWRP use DrakenFX files to flash your system back to stock, but this time do not flash supersu.
You should be good to go and just have to wait for ZTE to release the update and apply it via the updater UI.
BTW this is my fastboot oem device-info output:
(bootloader) Device tampered: false
(bootloader) Device unlocked: true
(bootloader) Device critical unlocked: false
(bootloader) Charger screen enabled: true
(bootloader) Display panel:
OKAY [ 0.059s]
finished. total time: 0.059s
Click to expand...
Click to collapse
dodo34 said:
Hi,
is it possible to relock the bootloader to original factory mode.
Click to expand...
Click to collapse
You mind my asking the reason WHY you want to Relock?
If is cuz the N update , I'll rather keep it unlock base on @lokissmile thread and I'm 100% sure I'll be releasing N TWRP Flashable Zips for all variants when N is available.
i have G model and flashed the aboot of the U modell.
How to flash back now the aboot of the G modell back ?
Any help for the G modell ?
dodo34 said:
Any help for the G modell ?
Click to expand...
Click to collapse
as far my understanding the G model have factory images right? just download the one you were using and flash it using custom recovery.
LifeSupportZ said:
as far my understanding the G model have factory images right? just download the one you were using and flash it using custom recovery.
Click to expand...
Click to collapse
@dodo34
This is correct, the full image should be the one that contains both the emmc_appsboot.mbn (this is your aboot or bootloader partition) and the fastboot.img (the fbop or fastboot command partition) as well as recovery.img. This will set everything back to stock in one swoop. Otherwise you have to reflash the signed (tenfars) TWRP to flash back the fastboot image and then falsh back stock, since regular TWRP will either not be there anymore or will not run since BL is locked now
P.S, you can leave the fastboot alone for the purposes of OTA, no update so far hes checked on it and i am not sure if there is a G package with it since it has not changed from release, so as long as the image you flash has the bootloader and recover you should be good for N
P.S.2 Actually I see a little catch 22 here. If you lock the BL first, then you will not be able to run TWRP or boot into system if it was modified. You would need to flash the "signed" version of TWRP or flash stock recovery before locking the BL. Stock would be preferable since it can flash the factory package withouht modifications. If using TWRP i think you have to change updater-script to remove a .... and i just found another catch 22. The updater-script will look for product name P996A04 and if yours shows as 2017U the it will report back P996A01 so you will have to have a signed TWRP on there no matter what. Either to flash the backed up aboot fbop and recovery and then flash the full factory package through stock recovery or mod the updater-script and remove the assert line and flash the whole thing with TWRP. What do you get in TWRP shel when you run this "getprop ro.product.model"
peramikic said:
@dodo34
This is correct, the full image should be the one that contains both the emmc_appsboot.mbn (this is your aboot or bootloader partition) and the fastboot.img (the fbop or fastboot command partition) as well as recovery.img. This will set everything back to stock in one swoop. Otherwise you have to reflash the signed (tenfars) TWRP to flash back the fastboot image and then falsh back stock, since regular TWRP will either not be there anymore or will not run since BL is locked now
P.S, you can leave the fastboot alone for the purposes of OTA, no update so far hes checked on it and i am not sure if there is a G package with it since it has not changed from release, so as long as the image you flash has the bootloader and recover you should be good for N
P.S.2 Actually I see a little catch 22 here. If you lock the BL first, then you will not be able to run TWRP or boot into system if it was modified. You would need to flash the "signed" version of TWRP or flash stock recovery before locking the BL. Stock would be preferable since it can flash the factory package withouht modifications. If using TWRP i think you have to change updater-script to remove a .... and i just found another catch 22. The updater-script will look for product name P996A04 and if yours shows as 2017U the it will report back P996A01 so you will have to have a signed TWRP on there no matter what. Either to flash the backed up aboot fbop and recovery and then flash the full factory package through stock recovery or mod the updater-script and remove the assert line and flash the whole thing with TWRP. What do you get in TWRP shel when you run this "getprop ro.product.model"
Click to expand...
Click to collapse
if he mod the updater_script from official zte update to make it flash friendly, this is what i'll do,
* Mod updater script and remove aboot and recovery for now
* flash new zip without file mention above
* boot to bootloader while having custom recovery
* lock back the bootloader
* boot to custom recovery and perform " format data "
* create a flashable zip with stock aboot and recovery
* flash new zip with aboot and recovery
* reboot to recovery and check if boot to stock recovery and while in there perform a factory reset
i know is a lot of steps but, seems like is the way to go to get everything back in place without zte noticing anything.
Now i am on B06.
I put update.zip B08 and select update. But it boots to TWRP recovery and update fails.
@dodo34 If you are trying to restore from the OS system update you need to reflash your stock recovery for it to work properly. Wait for someone to confirm what I just said, but that's how it worked for me.
how can i flash my original recovery. what is the command for cmd ?
Please help restoring back original recovery.
dodo34 said:
Please help restoring back original recovery.
Click to expand...
Click to collapse
rczrider said:
Putting Your Axon 7 Back to Stock
If you want to revert back to stock and re-lock your bootloader (eg. sending the phone in for warranty work or are selling it), you should be able to do that using the steps below. It worked for me, anyway, exactly as written below.
Copy everything off your internal storage that you don't want to lose. If you're not rooted (so already stock, but with unlocked bootloader), skip to step 6 below. Otherwise, continue.
Grab the "StockSystem" zip for your variant from this thread and place on your microSD card: http://forum.xda-developers.com/axon-7/development/rom-guide-updates-to-stock-files-via-t3469484
Reboot into TWRP and wipe system, data, dalvik, and cache
Flash the StockSystem zip and power off (doing so will restore stock boot but does not appear to restore recovery)
Boot into EDL mode and flash stock recovery only: http://forum.xda-developers.com/axon-7/development/wip-axon-7-root-bootloader-unlokced-t3441204
Power off the phone, plug from computer, and then boot into stock recovery (hold Vol+ and press Pwr, continue holding Vol+ until recovery comes up)
Select "Wipe data / factory reset" and then "Yes"
After that finishes, select "Reboot to bootloader"
Plug in your phone into your computer and do: fastboot oem lock (see second post if this doesn't work and says <waiting for device>)
Your phone will reboot and should have been totally wiped (including internal storage) by doing the above
This should leave you with a stock, locked, and unrooted phone that can take OTAs. Note: it's possible (in fact, likely) that an OTA could break the ability to unlock your bootloader and gain root again, so be careful about going back to stock if you think you'll want to unlock/root later on!
If you need any stock files for B20 or B27 (stock recovery for re-locking, for example), you can get them here: http://forum.xda-developers.com/axon-7/development/untouched-b20-boot-recovery-files-t3443818
Click to expand...
Click to collapse
Try this guide from newbie unlock thread.
I get this error.
C:\Users\Intel\Downloads\Axon7\ADB>axon7tool -r
Usage:
axon7tool -r <boot|recovery|gpt> ...
axon7tool -w <boot|recovery>
C:\Users\Intel\Downloads\Axon7\ADB>axon7tool -r recovery
Connecting to device...
S: failed to read command
S: Failed to receive hello
terminate called after throwing an instance of 'std::runtime_error'
what(): error: Unknown error
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information.
what i did.
Flashed Draken TWRP System Image B06
Flashed Draken TWRP Stcok Recovery B06
Flashed full update.zip B08
Now my phone is recognized as A2017G on the PC
But when i reboot the phone i get a message that the phone is unlocked and not trusted ?
why ?
since i have unlocked bootloader by official tool i can not root it and i cannot install any recovery
please help me so i can relock bootloader of my phone
i have tried maximum methods to relock bootloader of my phone but i am unsuccesful
can someone please help me so i can relock bootloader of my phone
uhm i unlocked my bootloader via official tool, and i already installed twrp and magisk
What is the process that you apply because I am facing issue.whenever I tried to install twrp recovery it says something about target report size does not reach and partition error
twrp not installing
now i am facing issue with this
unknown partition 'recoveryC:\Users\sankalp\Desktop\asus max pro m2\unlock\twrp-3.3.1-0-X01BD.img'
error: cannot determine image filename for
https://forum.xda-developers.com/max-pro-m2/development/recovery-twrp-3-2-3-x-t3885935/page10
Unlock 1st
After relock etc
Use original recovery wipe data case
Than boot to bootloder
Boot to twrp recovery
Wipe data
Install twrp
Flash rom?
https://forum.xda-developers.com/max-pro-m2/development/recovery-twrp-3-2-3-x-t3885935/page10
Unlock 1st
Flash orio file .. stock orio not pie
I know that some variants can't be unlocked,
but what if we downgrade with lgup and edz files, root using an exploit usable on the downgraded version, and then use su to dd an unlocked bootloader (extracted from a lucky guy that had the unlock.bin from lgdevs for the same model). Will it not boot because of imei or unique device ID ? Or worse the bootloader partition isn't r/w from the root ? Just asking because I don't really know how work the protection on Android.