Hello so I'm using Huawei P9 lite
VNS-L21
And after unlocking bootloader I receive this message when I'm rebooting it:
Your device has been unlocked and can't be trusted
How to get rid of it? Because I want to sell this phone..
I really don't know how to relock it so please anyone help me.
P.s I have been flashed TWRP via fastboot..
I'm afraid you can't, the only way is to relock the bootloader
Aviu said:
Hello so I'm using Huawei P9 lite
VNS-L21
And after unlocking bootloader I receive this message when I'm rebooting it:
Your device has been unlocked and can't be trusted
How to get rid of it? Because I want to sell this phone..
I really don't know how to relock it so please anyone help me.
P.s I have been flashed TWRP via fastboot..
Click to expand...
Click to collapse
Flash with Dload firmware official lower version you had.
Ex: vns-l21c432b160 + twrp
Dload l21c432b130
Bootloader locked more message.
volume - and power button when phone is off.
open cmd as fastboot and write : fastboot oem relock ;your code;
Hi guys, I have a P8 lite here with a problem: it stays stuck on the huawei logo. So I'm trying to flash a new rom to solve the problem.
I went to the huawei website, obtained the oem code, then i proceed with
fastboot oem unlock CODE
output OKAY, the phone changes its status to UNLOCKED
then I
Fastboot reboot
and the bootloader it LOCKED again. Do you know why this happens? Could I try to flash twrp right after the OEM UNLOCK without rebooting?
Hi, I have Asia-Pacific version of the Huawei Mediapad M3 (BTV-W09C209B005). I'm trying to flash TWRP to gain root access, but I'm encountering problems in the preliminary stage. I've searched for similar problems in the forum, but couldn't find a solution that works for me.
So here are the steps I've done:
1. I received the official bootloader code from Huawei.
2. I used ADB and Fastboot to unlock the bootloader, but I noticed something peculiar: the screen says
Phone UNLOCKED
FRP UNLOCKED
I am the first owner of the tablet, so I was surprised to see that it was already unlocked. In any case, I tried the fastboot oem unlock command, and it returned this error:
FAILED (remote: password wrong)
3. I tried to proceed to TWRP flash on the assumption that the phone was already unlocked. But I get this error:
sending 'recovery' (23794 KB)....
OKAY [ 0.740s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished, total time: 0.740s
4. I tried relocking the bootloader, as per several XDA threads, before unlocking again. But I once again encounter an error:
FAILED (remote: stat not match)
I already contacted Huawei to make sure that the unlock code they sent me was correct, but I doubt that it'd be wrong because they probably just paste it after generating it in the system.
Any ideas how to proceed?
Interesting, first off if you want to check and see if you phone is BL is unlocked go to Settings, Developer Options and see if your OEM unlocking is grayed or doesn't move..if it doesn't move or grayed out then it's unlocked.. if it moves the it not unlocked.. check that your fastboot /adb are set up correctly. Though the easiest way to this ( unlocking the BL and flashng TWRP) would be to get Huawei Multi-Tool v8 by Team MT and use it,, ( grab the one in the Honor 8, as I know it does work) and make sure you ave the correct TWRP for your tablet..
lilbrat said:
Interesting, first off if you want to check and see if you phone is BL is unlocked go to Settings, Developer Options and see if your OEM unlocking is grayed or doesn't move..if it doesn't move or grayed out then it's unlocked.. if it moves the it not unlocked.. check that your fastboot /adb are set up correctly. Though the easiest way to this ( unlocking the BL and flashng TWRP) would be to get Huawei Multi-Tool v8 by Team MT and use it,, ( grab the one in the Honor 8, as I know it does work) and make sure you ave the correct TWRP for your tablet..
Click to expand...
Click to collapse
Thanks for pointing me the Huawei multi-tool. So I tried that, and as suspected, the device is still locked. I am able to toggle the OEM unlocking and the tool says so through the lock status (oem lock-state info LOCKED). I proceeded unlocking with the tool, but I received the same error: FAILED (remote: password wrong)
The unlock code doesn't seem to be the problem because the tool displayed the corresponding serial number and it was a match. So there's something preventing me from unlocking the bootloader--it's probably the same reason why the fastboot says "PHONE Unlocked" even though it actually isn't. Again, I can't do the relock trick because the device wouldn't accept the Huwei unlock code.
Thoughts?
Hmm, why do some of these seem to be so picky when it comes to unlocking.. The multi too will copy what ever code you but in, sorry for the questions just trying to help narrow it down.. in the developer section there are 3 things that need to be ticked,, OEM unlocking, USB debugging and and allow ADB debugging in charge only mode.. Maybe you software got out of wack.. read here ( https://forum.xda-developers.com/mediapad-m3/help/bricked-mediapad-m3-t3746893) as it may help.. Not sure if HiSuite can restore it.
OEM unlocking and USB debugging are "working" in the sense that I can send commands from the PC via USB. It's just that I can't properly unlock the phone. I updated the drivers to see if that's the problem, but I still encounter the same error. I basically couldn't move forward with the link you sent because the first step was to unlock the device and I couldn't get past that. When I try to unlock the error is still 'FAILED (remote: password wrong)'.
I've seen some threads from other Huawei devices that suggest rolling back the firmware, but this is the first time I'm trying to root this device. And it's still on Marshmallow, which is the version that came with the first release of the Mediapad M3, so basically there's nothing to roll back to.
Why not upgrade to 7 as that is where most of the newer threads are written for plus it will redo your boot loader... giving you a clean slate to work with..and that might be your issue..
I can't update to 7 because Huawei stopped providing updates for my region. I failed to mention that the reason why I'm trying to unlock the device is to change the region and upgrade to 7.
May I ask where you are?
From Southeast Asia, but the tablet was imported from China. I planned to convert it to the European version so I can at least upgrade to Nougat. I'm still stuck though.
So Huawei sent me a new unlock key and it works! Problem solved!
cescpistol said:
From Southeast Asia, but the tablet was imported from China. I planned to convert it to the European version so I can at least upgrade to Nougat. I'm still stuck though.
Click to expand...
Click to collapse
Imy model also seas... Has updated to nougat without changging to us.
I'm having Mate 10 lite(Nova 2i aka Honor 9i). The device is now in soft brick state.
Device current state.
OEM - locked
Bootloader- locked
Recovery- EMUI
Huawei eRecovery- EMUI
What I have done so far.
Downloaded the firmware from Huawei Firmware Finder and tried forced update option , Firmware: RNE-L21 8.0.0.311(C185).
Response- Failed
Flash TWRP , Response- Since OEM lock and Bootloader is locked. Can't flash.
I'm having Lock code. But OEM lock via USB debugging cannot be turned ON since device is soft bricked. :crying:
In attachments I've uploaded "about phone", OEM & Bootloader status, Recovery.
If anyone has any solution please share.
did you try doing a factory reset?
if not then try once
if that dsnt work boot into fastboot and connect device and type this in CMD "fastboot -w"
this will erase everything from your phone even all data
then try booting up the device and then try unlocking the device
I will create a thread tonight for how to unbrick honor 9i.
do check that tonight you will be able to get back to EMUI8.0
although for you, u will need the bootloader unlock code as your device is locked
Hello everyone,
I have a Vky-l09c432 Huawei P10 Plus with an working System. So I would like to Update the System from Nougat to Oreo, and there is a small problem, which I cannot deal with. So maybe here is someone who has a good tipp for me. The Phone is not rooted, but has the bootloader unlocked.
The Thing is, that I have broken any Recovery installed (There no stock recovery or no TWRP).
So I tried to flash a recovery / System / Boot or whatever via. Fastboot Mode. If I try to do this the command prompt shows up with the fallowing error: failed (remote command not allowed).
All Drivers are installed correctly and in HiSuite the phone shows up too.
So the Debugging Mode is activated, but I cannot active OEM in developer Tools, because its grayed out. And I cannot also relock the bootloader again to use OEM in Developer Option. I don't have the Bootloader Code anymore.
Is it Right, that I cannot flash (failed (remote command not allowed). ) because of the OEM Setting ? (Fastboot devices shows up correctly)
With the Dload Methode, I also have a Problem, because the Files are to great for my SD Card (4GB+).
Is there any Option to install a Recovery (custom or Stock...) on my phone again ?
Kind Regards & Thank you a lot
Chip