What: Samsung S5 G906 S/K/L 32GB ROM 3GB RAM
Problem: Worked well with Milan ROM V2. Opted to update to V3. After Flashing through recovery, Issues arised.
1. Please install MDM (MMC Unmounted after booting)
2. Camera wont launch. Says Security Policy prevents use of Camera.
3. Bluetooth wont launch.
Been into hard reset, flashing old builds, even the first version of ROM. Tried Rooting and installing Philz Recovery to wipe Dalvik.
Anyway i am hoping to find solutions here. been awake since yesterday looking for solutions.
Thanks Much.
Have you found a solution?
Have you tried reverting back to Samsung stock?
I've found now about this Milan ROM.
I'd like to install a custom ROM on my G906K, but Asian language is not mine and translators are not that good.
Please give me your advice.
Tnx.
Hello, I'm new here
I've been trying to root my Galaxy Grand Prime+ (G532M, Android 6.0.3 Marshmallow) phone all day, but to do so I have to install a custom recovery mode, I've been looking for a TWRP image but I can't find one for my model. I have tried some but no luck, TWRP just doesn't boot.
Please help, if you need any information on my model just let me know
MxdMod said:
Hello, I'm new here
I've been trying to root my Galaxy Grand Prime+ (G532M, Android 6.0.3 Marshmallow) phone all day, but to do so I have to install a custom recovery mode, I've been looking for a TWRP image but I can't find one for my model. I have tried some but no luck, TWRP just doesn't boot.
Please help, if you need any information on my model just let me know
Click to expand...
Click to collapse
You should wait for some time the phone is New and maybe it might have another forum because its grand prime plus aka j2 prime so u should search for j2 prime twrp
I have the same model I am also waiting . . .
Noel SK said:
I have the same model I am also waiting . . .
Click to expand...
Click to collapse
They think it takes a long time to get twrp for my device, i have grand prime + sm-g532m
root: http://forum.xda-developers.com/android/development/root-samsung-galaxy-j2-prime-g532m-t3523090
If you dont find twrp you can use flashfire after root :good:
TWRP doesn't just magically pop up for your device... you do understand that someone actually has to download the TWRP source, write some code and compile it for the device right? Of course, you could go ahead and do it yourself (there are several posts on how to build a custom ROM/recovery).
Hello,
I have a N9005 that I'm tryin to install a custom ROM (I have another one already with Norma v29 working perfectly). In this one I flashed the original 5.0 firware and then tried to root, isntall custom recover, custom rom, etc., as I normally do. With this phone I can root and install custom recovery but every custom ROM i tried I always have a bootloop on Galaxy Note 3 screen (tried Norma, Phonesis, etc.).
I can reflash to an original ROM but don't understand why it doesn't work with a custom ROM.
Can any one help me? I even tried to change bootloader on a specfific tutorial for Norma v29.
Thank you in advance!
Boot to download mode and check the model first .
Is this a used phone ??
Hello. Yes is a used phone. The model is a SM-9005. The roms I'm using are for this model. I tried again a Lolipop 5.0 stock rom, then root, then recovery (until here everything works). Then applied Norma V29 and i'm stuck again at the Galaxy Note 3 screen, the blue led starts to blink and then the phone restarts. Really can't understand. Even tried the same memory card from my Note. Well the only difference is that one is 16GB and this one is 32GB. Any stock rom work perfectly but didn't want to use them.
Can it be that the internal memory size is causing the issue? is the only difference....can someone help?
Well my original phone is a 32GB. Don't know why the hell I was thinking 16GB... so most weired. If someone could help will be great. It's working with the stock 5.0 and rooted with CM-AUTO.
before flashing custom firmware you should enter the recovey and make complete format for both cache and data partitions.
after the firmware install it might take the system up to 10 minutes to boot.
Thank you for the answer. i'm doing all the steps (I changed roms on Note 3 for some time now). This one startups on the Galaxy Note 3 Screen, the led starts to blink (like 4-5 times) and restarts himself. So is not waiting time. made factory resets, all the wipes, even a script I found for fixing EFS. When I flash a Android 4.4 or 5.0 stock from SamMobile just works.
hi note 3 users
I'm new here i trying to install twrp in my n9005 odin give me pass the flashing but when my phone restart i press power + volume up + home button my phone go to stock recovery im try also with philz but same result can somebody help me
** when i download twrp give me 2 choice... American OR Europe what the correct version for my n9005 im leaving in Saudi Arabia
and i use the original cable usb 3 or i can use the normal Samsung usb cable
THANKS
adel alsayed said:
hi note 3 users
I'm new here i trying to install twrp in my n9005 odin give me pass the flashing but when my phone restart i press power + volume up + home button my phone go to stock recovery im try also with philz but same result can somebody help me
** when i download twrp give me 2 choice... American OR Europe what the correct version for my n9005 im leaving in Saudi Arabia
and i use the original cable usb 3 or i can use the normal Samsung usb cable
THANKS
Click to expand...
Click to collapse
hala adel, recheck the twrp version you downloaded is for 9005? check the md5 of your download..
9005 is the international version so its europe, US phones are different..
hope it helps, I can't think of anything else.. read in twrp for note 3 thread also
Dan0v said:
hala adel, recheck the twrp version you downloaded is for 9005? check the md5 of your download..
9005 is the international version so its europe, US phones are different..
hope it helps, I can't think of anything else.. read in twrp for note 3 thread also
Click to expand...
Click to collapse
twrp is ok but i cant install nt ux 9.7 rom by twrp give me faild ... pleas hellllllp
adel alsayed said:
twrp is ok but i cant install nt ux 9.7 rom by twrp give me faild ... pleas hellllllp
Click to expand...
Click to collapse
Suggests you are using the wrong TWRP version .
Read the roms instructions/ search thread .
use TWRP version 2.8.7.0.
Most custom roms do not support v 3.x.x.x
golalmo said:
use TWRP version 2.8.7.0.
Most custom roms do not support v 3.x.x.x
Click to expand...
Click to collapse
i use it already but given faild my phone is n90005 32 gb I don't know what can I do for install ux 9.7 rom
Does any other rom install ??
JJEgan said:
Does any other rom install ??
Click to expand...
Click to collapse
Yes i can install ... Phronesis Rom as a normal install only facing faild and zip corrupt in UX9.7 ROM
adel alsayed said:
Yes i can install ... Phronesis Rom as a normal install only facing faild and zip corrupt in UX9.7 ROM
Click to expand...
Click to collapse
then check the md5 of magma nx9.7..!
read the how to install in tge magma rom.. sometimes something small will interrupt the flashing
fabio.teles said:
Hello,
I have a N9005...
Click to expand...
Click to collapse
I thought I'd clean up the phone.
I installed via ODIN official fw = Lollipop.
Then root + TWRP 3.1.1.
Next installing custom rom RR 7.1.
ERROR
I resolved as follows:
Installing "CP_N9005XXUGBPB1_MODEM.tar" + "BL_N9005XXUGBPB2_BOOTLOADER.tar"
Now RR installation is successful!
But "not SIM" (can not enter PIN)
Solution:
Override file "libsec-ril.so". Here is: Root / System / lib / libsec-ril.so
Done - it works!
Files here: https://ulozto.cz/!M6PZA7EKQHNe/xda-zip
It helped me. Will it help you too?
*******
Thanks @"Anon_Help_You" !!!
(https://forum.xda-developers.com/galaxy-note-3/help/solution-lineage-os-sim-t3640689)
Everything said in title, please point me in the right direction.
Great news! and I am only self replying due to Finding the first unofficial custom recovery for the J320A / J320AZ / J320AG. (Exynos Chipset).
it can be found here https://www.androidinfotech.com/2018/02/root-samsung-galaxy-j3-2016-sm-j320az-marshmallow.html
Will be testing shortly on a J320A, currently running a stock 7.1.1 AT&T Rom.
This is new as of 2018 (hence the post being from Feb of this year).
Thanks goes to Android Info Developers-Kumar, Rain n Or.
I am also still considering putting together my own custom build of ClockworkMod, I'm surprised it hasn't been done yet due to J320A/AZ/AG users having the ability to root on 6.0.1 and dump recovery.
EDIT: So after flashing the recovery it appears to just be a regular stock J320AZ recovery (dont worry, cant brick due to being the same phone physically as the J320A / AG.
I Find this odd, and am wondering why something like this is online :/ is there a reason it ran stock recovery on my device, or is someone just packaging stock as TWRP unofficial?
https://forum.xda-developers.com/ga...twrp-j320a-az-ag-exynos-t3921729#post79350476
Guys, Please can anyone explain how to check if recent version of TWRP will work with Leeco S3 X626 with Mediatek Helio X20?
On TWRP compatibility device list at twrp.me/Devices there is no Leeco S3 X626 device listed, but there are some other from Leeco. Can Someone confirm what other model can be chosen and wont brick my device?
Also if I upgrade the stock bootloader with TWRP I'm also oblige to perform ROM update in the same time, or I can still easily work on stock rom until I will do the rom update some other time?
Thx
GoToLe said:
Guys, Please can anyone explain how to check if recent version of TWRP will work with Leeco S3 X626 with Mediatek Helio X20?
On TWRP compatibility device list at twrp.me/Devices there is no Leeco S3 X626 device listed, but there are some other from Leeco. Can Someone confirm what other model can be chosen and wont brick my device?
Also if I upgrade the stock bootloader with TWRP I'm also oblige to perform ROM update in the same time, or I can still easily work on stock rom until I will do the rom update some other time?
Thx
Click to expand...
Click to collapse
Why do you need a higher version?
There are working twrp, for example: 3.1.1. , there is a ported 3.2.1, but the mount to the PC in the original mode does not work.
I will also add, if you have an old version of the ROM, then the recovery should match the firmware version.