Related
So, I think my phone is a bit bricked at the moment, I have this image of a phone, an exclamation mark, then a computer connected by a row of dots. I can't use links because I'm a new forum member, but you can see an actual picture of this image on the "[STOCK ROM] Odin3 One-Click Downloader" thread by Darkstrider.
I can still get into "download mode" using the keypress and Odin still picks up the device on the COM port.
It had this firmware before I tried flashing it (16Gb model locked to the Three UK network):-
PDA: I9000NEJG2
PHONE: I9000NEJG1
CSC: I9000HCGJF2
The steps leading up to the bricking:-
I was firstly trying to follow the instructions on Darkstriker's 2nd post from his topic " [REF] BIG FAQ Thread! {Flash/Root HOWTO} {ADB&Tutorials} {T&T} [READ BEFORE POSTING!]"
So I got JG5 firmware from a link on the Modaco forums (from the " 22/Jul r3 (JG5) - MoDaCo Custom ROM for Samsung Galaxy S with Online Kitchen" topic, the ROM was hosted on coblitz.codeen.org.
Installed the "usb_drivers_GalaxyS_x64.zip" drivers from the "USB Driver for Galaxy S and Misc Info" (xda forums) topic. Windows XP picked up and used the drivers in the extracted "03_Swallowtail" folder. It added "Samsung Mobile Modem" and "SAMSUNG USB Composite Device" to Device Manager.
So, I did everything on Darkstriker's guide, added the .pit file, chose the "re-partition" option because I was flashing to JG5. The process got stuck on "File analysis..", waited 20-30mins and it didn't move from this status.
Didn't work, so then I tried some different drivers, I googled and found "I9000_USB_driver.rar" on hotfile.
This time Odin got to the "Do not turn off target!!" status and it didn't move for around 20-30mins.
Restarted my computer, detached and reattached the USB cable, I decided to not use the re-partition option and try again, the status got to "factoryfs.rfs", this time the phone display went blank, which didn't happen before, but again it seemed stuck, nothing happened after waiting 20-30mins. So I aborted and closed Odin.
At this point I just wanted to use the phone to make a call when I notice the image/symbol above that I described at the beginning of this post. Help!
What's the best way to fix this? I spent nearly 2-3hrs trying to flash my phone and now it's half dead! I've nearly run out of mental stamina, but will give it a fresh attack today/tomorrow if someone can offer some suggestions.
Was thinking about trying the "fix" on the "[STOCK ROM] Odin3 One-Click Downloader" topic but not sure if it is only for the Captivate.
Hope you guys can help me out
All I wanted to do was to put the "(ROM Galaxy Europe) Doc's StockRomMod V2 (XWJG5)(deoxed) 30/07/10" ROM on my device, and add the JIT compiler and Flash 10.1 player if possible
Go read the guides from the development area.
It's just too easy and you're making it overcomplicated to yourself.
If you have the connect to pc error logo.. remove battery and then proceed.
1. if you installed kies ever, you already have the needed drivers.
2. start odin and select correct files (pit,code,modem,csc in respective order)
3. put phone in download mode (home + volume down + power)(hold long enough)
4. plug it to computer (odin should say "added")
5. press start (in less than 5 mins you phone should restart and go into special mode where it does some magic and reboot again and your done).
My god Buddy, you are right, I was overcomplicating things, I did it in the exact order you said and now I'm getting the progress bar for the first time.
I'm feeling optomistic now! Thanks dude!
It worked! If I was gay I'd kiss you on the lips! Thanks again buddy, it was stupidly simple after all.
Tundraswan
Glad your issue is resolved... just feel warm and cosy knowing that its not possible to brick your Galaxy S.
HELP!!!!
twisted_mind said:
Tundraswan
Glad your issue is resolved... just feel warm and cosy knowing that its not possible to brick your Galaxy S.
Click to expand...
Click to collapse
Really? I can't get my Captivate to even boot up...........no signs of life.........HELP!!!!!!!!!!!!
Stupid me: I pulled the USB cable and cancelled a ROM update (that was mid way) with Odin because i realized the SIM and SD card were still in the phone....so i pulled it to remove those and now NOTHING>>>>
Please help, following the instructions and it won't go back into download mode. Is there any other way?
Hello !
Where do i find those files for PIT , PHONE , PDA and CSC ?
i have i9000 galaxy s Problem solved , i already repaired my phone
These forums are for the Samsung Galaxy S i9000, you want to go here...
http://forum.xda-developers.com/forumdisplay.php?f=703
the galaxy s gt 1900 screen
Hi,
after a fail at rooten my device my phone keeps hanging on the galaxy s I900 screen for about 20 sec and then it turns it self off and on. He will repeat this until he runs out off juice.
this topic was usefull.. because the hole odin set up worked. But because of the turning off and on he cant complete the hole progress.
can anyone help me?
buddy01 said:
Go read the guides from the development area.
It's just too easy and you're making it overcomplicated to yourself.
If you have the connect to pc error logo.. remove battery and then proceed.
1. if you installed kies ever, you already have the needed drivers.
2. start odin and select correct files (pit,code,modem,csc in respective order)
3. put phone in download mode (home + volume down + power)(hold long enough)
4. plug it to computer (odin should say "added")
5. press start (in less than 5 mins you phone should restart and go into special mode where it does some magic and reboot again and your done).
Click to expand...
Click to collapse
I may have bricked mine too. Can anyone tell me where i would be able to get these files please? Thanks in advance!
fieldop said:
I may have bricked mine too. Can anyone tell me where i would be able to get these files please? Thanks in advance!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=846913 that has all stock roms.. just choose the one u need and job done !! That is providing you can get into download mode ???
If you cant get into download mode, theres a clever little tool you can make to force the phone into download mode.. http://forum.xda-developers.com/showthread.php?t=819551
Good luck
azzledazzle said:
http://forum.xda-developers.com/showthread.php?t=846913 that has all stock roms.. just choose the one u need and job done !! That is providing you can get into download mode ???
If you cant get into download mode, theres a clever little tool you can make to force the phone into download mode.. http://forum.xda-developers.com/showthread.php?t=819551
Good luck
Click to expand...
Click to collapse
Thanks soo much!! Done it! =)
Hi, i have semi bricked my galaxy s which is from the african region, but purchased in dubai. i've managed to cut open a micro usb jack and i can clearly see the pins i need to use, my question is, does the resistor value have to be exactly 301k or it can vary up or down slightly. also instead of using 3 100k resistors can i add up other values as well to make it close to 301k? sorry im noob at this stuff atm but i find such hacking very intriguing. also when i tried it with the resistors that add up to 300k, i join them to pins 4 and 5 with the phone switched off, after 5 seconds it shows the same thing 'phone ! pc'. by which i know all hope is not lost yet.
6stringster said:
Hi, i have semi bricked my galaxy s which is from the african region, but purchased in dubai. i've managed to cut open a micro usb jack and i can clearly see the pins i need to use, my question is, does the resistor value have to be exactly 301k or it can vary up or down slightly. also instead of using 3 100k resistors can i add up other values as well to make it close to 301k? sorry im noob at this stuff atm but i find such hacking very intriguing. also when i tried it with the resistors that add up to 300k, i join them to pins 4 and 5 with the phone switched off, after 5 seconds it shows the same thing 'phone ! pc'. by which i know all hope is not lost yet.
Click to expand...
Click to collapse
I did 300k and it worked. 3 x 100k ohm resitors.
Solder just one pin and leave one pin loose.
Connect that micro usb when phone is shut down.
Touch with that loose end to that pin which you did not solder. 4 or 5.
Keep it pressed until phone goes to the download mode.
You can try my jm8 guide.
Section B is for flashing stock 2.1, to get a fresh clean install.
Hi all
My GF's phone is doing the stupid call thing where we cant her other people and they cant here us...
Im trying to update the FW, BUT i cant seem to access the Download mode...
I just get the normal mode with the picture of a Windows Phone USB wire and computer...
Anyone know how i can get to it?
tried searching but cant seem to find anything...
cheers
Keith
Probably you 've got a blocked (''faulty'') bootloader.
First you have to force Download mode using a USB-Jig. You can find one on Ebay or make one yourself, if you can get hold of a 300k Ohm metal film resistor, following that simple guide
http://forum.xda-developers.com/showthread.php?t=1092824
Then you have to flash a new bootloader (two files, *.eb0 and *.bin). Read this guide
http://forum.xda-developers.com/showthread.php?t=1019112
Once you follow these steps, then you can get into Download mode using the VolUp+Cam+PwrOn button combo
Hello, I so hope someone can help. I just updated my galaxy tab 2 7 p113 to Android 4.0.4 UEBLH2. That was done automatically from samsung. I wanted to then install the newest update to 4.1.1 jellybean. So I downloaded it from this link. http://www.trickytweaks.com/update-...ecli4-4-1-1-jelly-bean-ota-test-firmware.html. I put the official Android 4.1.1 UEBLH2 Firmware on my sdcard then held down my power and up volume and installed it. HOWEVER, it never finished installing. Went all the way to the end. Now I HAVE NO USB CONNECTION and NO BOOT UP. Just black Since I dont have usb connection I cant us oden. CAN ANYBODY PLEASE HELP? I still can put files on my micro disk card and then put sd disk in my tab and use the power button up arrow to install something but I tried installing clockwork mod but that did not work. Iam out of ideas. P.S. My tab IS NOT ROOTED. I tried updating back to and original rom 4.04 I download but that did work. Thank you.
I think you need to enter the download mode volume down+power or recovery mode volume up+power to be able to restore the tab
Try multiple times close the tab even with long pressing power then try the button combinations (press both for multiple seconds) and release to see if you could enter any mode
If you reached download mode try flashing stock firmware for your tab specific model 3113 or 3110 or 3100 via odin (install kies and reboot before)
If you reached recovery (stock) then connect with kies and choose recover firmware from kies options (near the word file in top) you should have active internet connection
You could try charging tab even for some hours before trying button cobinations
If not try to return as not rooted so warranty is goood
Sent from Galaxy S2 or Galaxy Tab2
Mohamedselim said:
I think you need to enter the download mode volume down+power or recovery mode volume up+power to be able to restore the tab
Try multiple times close the tab even with long pressing power then try the button combinations (press both for multiple seconds) and release to see if you could enter any mode
If you reached download mode try flashing stock firmware for your tab specific model 3113 or 3110 or 3100 via odin (install kies and reboot before)
If you reached recovery (stock) then connect with kies and choose recover firmware from kies options (near the word file in top) you should have active internet connection
You could try charging tab even for some hours before trying button cobinations
If not try to return as not rooted so warranty is goood
Sent from Galaxy S2 or Galaxy Tab2
Click to expand...
Click to collapse
Yup, this should get you going again. If you can get into download mode, you should be okay. That's what Odin needs.
Download mode is volume down plus power. Then volume up
Recovery mode is volume up plus power.
I want to thank both the posters on trying to help me. I did hold down the power and download button and it went in to the download mode. HOWEVER, since I can not access usb it did not do anything. Just kept saying downloading. As I mentioned in my first post I CAN ACCESS MY SD DISK FILES by doing the power up button thing. Thats the only way I can get files on. But the DOWNLOADING down arrow just does not do anything. hmmmmmmm will keep plugging away.
I can not understand how you can not access usb, is it a lacking driver so download kies and reboot and try connect again ,also try a different usb ports (esp the rear of case) of your computer
Was usb working before the problem?
do you have cwm or stock recovery?
If cwm so download cm10 or cm9 from www.teamhacksung.org and put in usb card and flash but do a cash delete and dalvik delete afterwards not for boot loop
If stock so try stock firmware from www.samfirmware.com (register their first) and put in sd card and try to flash
Sent from Galaxy S2 or Galaxy Tab2
growthweb said:
I want to thank both the posters on trying to help me. I did hold down the power and download button and it went in to the download mode. HOWEVER, since I can not access usb it did not do anything. Just kept saying downloading. As I mentioned in my first post I CAN ACCESS MY SD DISK FILES by doing the power up button thing. Thats the only way I can get files on. But the DOWNLOADING down arrow just does not do anything. hmmmmmmm will keep plugging away.
Click to expand...
Click to collapse
I think you're misunderstanding download mode. When you get the device in download mode, connect it then to the computer, with Odin open. The only reason Odin wouldn't recognize it would be a driver issue. In that case, do as the previous poster stated. When you're in download mode, you're strictly flashing through Odin. You aren't going to see the device as a storage device on the computer. The only way your computer can interact with it at this point is Odin. Via Odin, flash the proper p3113 firmware file from sammobile/samfirmware (will be a large 600mb+ file). Once that's done, you should then be back to completely stock and healthy recovery and ROM. Reboot tab and see what happens. If it boots, and you still want to update, then make sure you get the correct ota for the base file you just flashed (that is, if you're trying to upgrade to say Jellybean). If you need more help always ask, but you should be fine. If I lived nearby I'd do it for you.
All I can say is unbelievable help here! Thank you. I am spending hours on this (plus a fortune on this new Tab 2 7). After studying up I do now understand how Odin works and how grabbing the correct firmware will do the job. HOWEVER (maybe others come across this huge roadblock) nothing can be done with out usb interaction. I DID DOWNLOAD KIES and installed it. But no matter what I do can not get any storage device listed or anything going on between tab and computer. Only thing my Tab does is when I plug it in to the computer via usb is go in to charging mode with the charging icon showing. Loading Odin does not show any connection. I have tried different computer USB plugins, 3 different computers (all I have loaded Kies on). Iam sooooooo close. If only while in the POWER BUTTON DOWN ARROW DOWNLOAD MODE and running ODIN on my computer there would be a connection I would be home free and able to flash firmware.
dictionary said:
I think you're misunderstanding download mode. When you get the device in download mode, connect it then to the computer, with Odin open. The only reason Odin wouldn't recognize it would be a driver issue. In that case, do as the previous poster stated. When you're in download mode, you're strictly flashing through Odin. You aren't going to see the device as a storage device on the computer. The only way your computer can interact with it at this point is Odin. Via Odin, flash the proper p3113 firmware file from sammobile/samfirmware (will be a large 600mb+ file). Once that's done, you should then be back to completely stock and healthy recovery and ROM. Reboot tab and see what happens. If it boots, and you still want to update, then make sure you get the correct ota for the base file you just flashed (that is, if you're trying to upgrade to say Jellybean). If you need more help always ask, but you should be fine. If I lived nearby I'd do it for you.
Click to expand...
Click to collapse
growthweb said:
All I can say is unbelievable help here! Thank you. I am spending hours on this (plus a fortune on this new Tab 2 7). After studying up I do now understand how Odin works and how grabbing the correct firmware will do the job. HOWEVER (maybe others come across this huge roadblock) nothing can be done with out usb interaction. I DID DOWNLOAD KIES and installed it. But no matter what I do can not get any storage device listed or anything going on between tab and computer. Only thing my Tab does is when I plug it in to the computer via usb is go in to charging mode with the charging icon showing. Loading Odin does not show any connection. I have tried different computer USB plugins, 3 different computers (all I have loaded Kies on). Iam sooooooo close. If only while in the POWER BUTTON DOWN ARROW DOWNLOAD MODE and running ODIN on my computer there would be a connection I would be home free and able to flash firmware.
Click to expand...
Click to collapse
How about you just gtalk me, lol. I'll probably reply faster there anyway. deliberation at gmail dot com.
Don't use kies. Install the Samsung driver for mobile phones (Google it).
Sent from my GT-P5113 using Tapatalk 2
Download Mode
growthweb said:
All I can say is unbelievable help here! Thank you. I am spending hours on this (plus a fortune on this new Tab 2 7). After studying up I do now understand how Odin works and how grabbing the correct firmware will do the job. HOWEVER (maybe others come across this huge roadblock) nothing can be done with out usb interaction. I DID DOWNLOAD KIES and installed it. But no matter what I do can not get any storage device listed or anything going on between tab and computer. Only thing my Tab does is when I plug it in to the computer via usb is go in to charging mode with the charging icon showing. Loading Odin does not show any connection. I have tried different computer USB plugins, 3 different computers (all I have loaded Kies on). Iam sooooooo close. If only while in the POWER BUTTON DOWN ARROW DOWNLOAD MODE and running ODIN on my computer there would be a connection I would be home free and able to flash firmware.
Click to expand...
Click to collapse
Once you are in download mode, connect your tab to the computer with the usb connection.....you should see a com xx number pop up in Odin in yellow reporting your device is connected thru a communication port. From there you will be able to choose the file you want as a PDA uncheck everything else...reboot...reset timer....whatever. Just make sure you have the correct firmware. There is a Odin flashback to Stock rom in the development section. Make sure it's for your device. Once you start Odin, should take about 4 mins...disconnect and hold the power button down to reboot. That's it....
Hello Everyone Again, I just want to say thank you for all of you who took the time to help. I hopefully will become knowledgeable enough to help people in the forums as I gain knowledge. I finally did find the solution. I did everything that was mentioned. And no matter what what I did with KIES drivers Samsung usb drivers, etc could not get a connection so I could us Odin to keep me back to the orgiginal 800 mb 4.04 original file. My solution was (as mentioned) I deleted all my windows drivers dealing with usb, kies, etc. Then rebooted. I notice even though I did not have a direct usb connection showing up now Odin was showing a connection! So using Odin I got to restore everything and now back to like new. Lesson learned. Hope this helps others that almost fatally brick their tablets. Thanks again for all our help
growthweb said:
Hello Everyone Again, I just want to say thank you for all of you who took the time to help. I hopefully will become knowledgeable enough to help people in the forums as I gain knowledge. I finally did find the solution. I did everything that was mentioned. And no matter what what I did with KIES drivers Samsung usb drivers, etc could not get a connection so I could us Odin to keep me back to the orgiginal 800 mb 4.04 original file. My solution was (as mentioned) I deleted all my windows drivers dealing with usb, kies, etc. Then rebooted. I notice even though I did not have a direct usb connection showing up now Odin was showing a connection! So using Odin I got to restore everything and now back to like new. Lesson learned. Hope this helps others that almost fatally brick their tablets. Thanks again for all our help
Click to expand...
Click to collapse
Glad you got it sorted.
i jus did the same thing u did
hi how r u doing. i jus did the same mistake u did and i really need your help please
Maxwell255 said:
hi how r u doing. i jus did the same mistake u did and i really need your help please
Click to expand...
Click to collapse
Hi.if u have done the exact same thing then just read the previous page and comments.
Sent from my GT-P3110 using xda app-developers app
Glad to see you resolved your issue. In the future, question/help threads belong in Q&A only.
Thank You.
Because your issue has been resolved...
Thread Closed.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"If you choose not to decide, you still have made a choice"
Sent from my Galaxy Note (i717), using XDA Premium.
PeartFan40 said:
Glad to see you resolved your issue. In the future, question/help threads belong in Q&A only.
Thank You.
Because your issue has been resolved...
Thread Closed.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"If you choose not to decide, you still have made a choice"
Sent from my Galaxy Note (i717), using XDA Premium.
Click to expand...
Click to collapse
Thread is still actually open, lol
Is there any way to save my tablet if there is NO firmware out?
Im talking about the SCH I705, I followed the root guide, and it got ****ed up.
Unable to boot into recovery (it goes to Odin "could not do normal boot.")
Tablet seems unresponsive sometimes (to power on/off)
Will boot cycle occasionally
???????????????????
igotbricked said:
Is there any way to save my tablet if there is NO firmware out?
Im talking about the SCH I705, I followed the root guide, and it got ****ed up.
Unable to boot into recovery (it goes to Odin "could not do normal boot.")
Tablet seems unresponsive sometimes (to power on/off)
Will boot cycle occasionally
???????????????????
Click to expand...
Click to collapse
You have to reflash your tablet using ODIN. It's not that hard. Just follow the second method here (you don't need to download android SDK)
copy this in your navigator bar : rootzwiki . com/topic/37272-verizonsch-i705-root-for-all-current-firmware/ ( delete space around the dot)
Plus, your tab will be rooted.
You're welcome.
P.S : This limitation of URL is annoying as hell.
Initially i was able to get into Recovery Mode and was trap in Boot Loop but when i Flash a Rom from Dorky's with ODin 3 Even Boot Loop Goes away nothing appears except Black screen but can get into Download Mode
so tried another time with Odin 1.875 with some other Rom Odin first detected it and the when process Starts it gives error failed i restart process and nothing happens i took off the battery and replaced it and tried to get into Download Mode but nothing Happens:crying::crying::crying:
Galaxy Y s5360
Please help, u can help!!
xhizors111 said:
Initially i was able to get into Recovery Mode and was trap in Boot Loop but when i Flash a Rom from Dorky's with ODin 3 Even Boot Loop Goes away nothing appears except Black screen but can get into Download Mode
so tried another time with Odin 1.875 with some other Rom Odin first detected it and the when process Starts it gives error failed i restart process and nothing happens i took off the battery and replaced it and tried to get into Download Mode but nothing Happens:crying::crying::crying:
Galaxy Y s5360
Please help, u can help!!
Click to expand...
Click to collapse
Start calm.
All you need is a cool mind now.
Search for the USB JIGGS available on xda and see if someone from your area has it. You can then take help from that person. If not then just go to service center, tell them that it stuck like this while doing software update and act like you no nothing about rooting our flashing. That will do.
A Hero Can Be Anyone. GENERAL HELP THREAD
Is is still repairable
Bruce Wayne said:
Start calm.
All you need is a cool mind now.
Search for the USB JIGGS available on xda and see if someone from your area has it. You can then take help from that person. If not then just go to service center, tell them that it stuck like this while doing software update and act like you no nothing about rooting our flashing. That will do.
A Hero Can Be Anyone. GENERAL HELP THREAD
Click to expand...
Click to collapse
I am not thinking to use a jigg as even after i get into Download mode incase after jigg i would definately make situation more worse
is it repairable, when i connect it with Cable i can see it is searching for drivers so its not completely gone i guess,
will service center guys will able to repair it??
xhizors111 said:
I am not thinking to use a jigg as even after i get into Download mode incase after jigg i would definately make situation more worse
is it repairable, when i connect it with Cable i can see it is searching for drivers so its not completely gone i guess,
will service center guys will able to repair it??
Click to expand...
Click to collapse
Yes, offcouse.
Just let them be unaware of you knowing about root/cwm etc. just act dumb. If they get to know your warranty is already void, they will charge you money for repairing it.
Follow what bruce says..
Tell them u got an update in kies nd this happened
** rooting is new for me,
nd i am a noob to root....**
They said Board is damaged
They are saying board is damaged!
price to repair it is more than its second hand value in market
i took it from their and brought it home
i remember before giving them when i connect usb cable to it unknown device found is detected but now its not even showing that
i am developer guy so not a completely noob
i want to repair it not to replace its body parts
can someone help
please!
Please anyone!!
or do refer any book!
xhizors111 said:
They are saying board is damaged!
price to repair it is more than its second hand value in market
i took it from their and brought it home
i remember before giving them when i connect usb cable to it unknown device found is detected but now its not even showing that
i am developer guy so not a completely noob
i want to repair it not to replace its body parts
can someone help
please!
Click to expand...
Click to collapse
The last 'n' only hope left is this:-
Install ur phone specific driver on pc.
1. Take out battery, sim & sd card.
2. Open odin.exe on pc.
3. After this, connect the phone via USB cable to PC(yes! without battery,sim & sd card)
4. Press the download mode combo keys.
5. While keep pressing all those keys, insert the battery now.
6. Now, odin should detect ur phone so that u may get it updated with stock firmware.
And if this also doesn't work, then bro u might have lost it at all
Sent Via XDA™ Premium
Soo i accidentally disabled the dev options on my samsung galaxy s7 edge and then decided to restart my phoe because i didnt notice and now im stuck with an error that says "custom binary blocked by FAP lock" now i looked around the internet on ways to fix this but the thing is that i cant really connect my phone to my computer, yes i did the volume down+power+home button thing and i connected it to my pc but nothing happened, odin didnt recognize my phone and my computer reads it as "gadget serial" i tried installing the usb drivers and all but i keep getting errors, its like my phone doesnt realy wants to cooperate.
Anyways i was wondering if any of you could help me with this please, i beg of you if anyone has an answer im willing to try, also if you need more info just ask, ill be glad to provide, thanks!
Anyone?...
Well i managed to fixed it so heres the solution for all of you that may come across this,
Soo basically make sure youre pc is fully updated, it must have all window drivers installed (i used windows 10) all window updates, make sure all the pieces of your pc are updated and then connect your phone and for the love of god be patient
I take it this is you're first time encountering something like this... at any rate, welcome to the forums.