Hello,
I had the Syberia ROM and decided to switch to MIUI ROM.
I did the process with fastboot and mi flash tool but failed and as a result the phone no longer opens. I didn't lock the bootloader but it was giving me an error. Then I saw that probably because I used old version of Mi Flash. I downloaded the Fastboot ROM from https://xiaomifirmwareupdater.com
Right now if I try with the keys to enter fastboot or recovery, the Redmi logo flashes for several minutes and then some time it stabilizes. So through the buttons I can't do anything.
If I connect it to PC it does not recognize the device. Neither through Minimal ADB and Fastboot nor with adb devices.
I understand that I have to somehow get into fastboot mode and flash the rom but I can't find any other way.
What do you suggest I do?
Related
Hey guys,
I have a problem with a bricked xiaomi redmi 2 prime.
After a bootloop i tried to fix the problem with a system reset. But this does not work
After i booted into recovery and wiped all data, the phone reboot but than nothing happend. So i tried to flash the rom with the mi flash tool, but there i get the error "remote: failed to write partition".
So i went over to the adb and fastboot programms, with fastboot i erased system, userdata, recovery, boot and then i flashed the images of this elements back on the phone (fastboot flash sayed that flashing went successfully)
Then the phone reboot, nothing happend and i can´t get into recovery mode, also adb doesn´t recognoze the phone anymore
Have you any idea what i can do to fix the phone, or can i put it into the trash?
Thanks for your help
Stop experimenting.
Does fastboot work? Do a full flash with miflash(erasing all storage)(firmware should be of your model itself)
If fastboot doesnt work,try putting in the charger with battery in,if there is any vibration,you have a chance of reviving your r2
#fingerscrossed
Ezio95 said:
Hey guys,
I have a problem with a bricked xiaomi redmi 2 prime.
After a bootloop i tried to fix the problem with a system reset. But this does not work
After i booted into recovery and wiped all data, the phone reboot but than nothing happend. So i tried to flash the rom with the mi flash tool, but there i get the error "remote: failed to write partition".
So i went over to the adb and fastboot programms, with fastboot i erased system, userdata, recovery, boot and then i flashed the images of this elements back on the phone (fastboot flash sayed that flashing went successfully)
Then the phone reboot, nothing happend and i can´t get into recovery mode, also adb doesn´t recognoze the phone anymore
Have you any idea what i can do to fix the phone, or can i put it into the trash?
Thanks for your help
Click to expand...
Click to collapse
Yup actually download the latest version of miui fastboot files..paste them in the fastboot folder... Dont bother erasing you phn again(as it does erase at the time of writing new files...)And most importantly flashing only 3 files is more than enough. Flash them in the order boot.img, system.img, recovery.img and thats it. If your problem is actually not booting into fastboot then....press the volume down button and insert your usb while keeping it pressed.
Hey guys,
thanks for the answers. I tryed to flash only thees 3 files but it doesn´t change anything. fastboot works without trouble so far.
I tried multiple times the xiaomi flashing tool but this only throws errors -.-'
I will try again and keep you by the actual progress ^^
Ezio95 said:
Hey guys,
thanks for the answers. I tryed to flash only thees 3 files but it doesn´t change anything. fastboot works without trouble so far.
I tried multiple times the xiaomi flashing tool but this only throws errors -.-'
I will try again and keep you by the actual progress ^^
Click to expand...
Click to collapse
If you can get the fastboot to work, you can flash recovery on your phone for good or temporarily to flash zips.
How to do it?
1.Get into fastboot on phone
2.Install minimal adb and fastboot in your computer
3.Run adb and install drivers
4.Connect your phone which should be in fastboot to computer
5.Check for devices by using "fastboot devices", if a device is listed, proceed
6.Download a custom recovery, rename the recovery img to something easy than using the full name and copy the img into the folder where minimal adb and fastboot is installed
7.Type in "fastboot flash recovery <name you gave to recovery img>.img" (img for the image format) to flash recovery permanently
OR
7.Type in "fastboot boot <recovery name>.img" to use it temporarily, this method will erase the recovery on reboot so flash whatever you want before rebooting if you're following this method.
8.Flash in your ROM zip, try stock and custom ROMs, see if you can get your phone to work
GOOD LUCK
Same error with my yureka plus (error "remote: failed to write partition"). I'm planning to buy redmi 2 prime.. . Scared if this will happen to redmi 2 prime
Hai all , I am new here.
I need some help to unbrick my device. i tried almost all method and still no luck. the only method i havent tried is DFC, but i dont prefer to do it since its pretty complicated.
My device run rom Global Stable Miui 7 and i flashed Developer rom Global using EDL download mode.
there was an error and now my device stuck in Mi logo. I can still access Mi bunny fastboot ( vol down + power)
So far I have tried 3 methods
Method 1: reboot to fastboot mode, plug to pc, open ADB cmd prompt and type fastboot oem EDL. But no success because device is still locked bootloader.
Method 2: reboot to fastboot mode, plug in to pc, download fastboot EDL cmd from xda forum, unzip then run edll.cmd, device reboot to mi logo again.
Method 3: in Mi logo, plug in to pc, open cmd prompt, type Adb reboot edl, press enter but device cannot reboot to edl mode because it says I need to tap on confirmation dialog on device. But its not possible since device only load up to mi logo
Download the latest stable fastboot ROM from here http://en.miui.com/a-234.html then flash it.
Sent from my Redmi 3S using Tapatalk
If only it was that easy. I've tried 3 methods above but still no luck. Use Adb reboot edl, fastboot oem.
How to flash if its only stuck at mi logo
Because I had this exact same thing happened before. What I did was while it kept bootlooping at the Mi boot splash I held down Vol - + power until fastboot mode pops up. Then you'd be able to flash.
Sent from my Redmi 3S using Tapatalk
Trovies said:
If only it was that easy. I've tried 3 methods above but still no luck. Use Adb reboot edl, fastboot oem.
How to flash if its only stuck at mi logo
Click to expand...
Click to collapse
First off you cannot just unlock the bootloader easily, like in fastboot or anyhow, you need to follow the guides. And this is possible by the way only with a working Dev rom.
Well so now, you've to get miflash tool and flash either stock rom, or dev rom.
You simply hold power and volume down as long (can take some time) as it will show "fastboot" and some android art.
Then you follow the guides to flash either stock rom or dev rom using fastboot, and you're good to go.
I don't see why this wouldn't be working for you, try to stick exactly to what i said. If you don't know how to use Miflash then search at en.miui.com
Trovies said:
Hai all , I am new here.
I need some help to unbrick my device. i tried almost all method and still no luck. the only method i havent tried is DFC, but i dont prefer to do it since its pretty complicated.
My device run rom Global Stable Miui 7 and i flashed Developer rom Global using EDL download mode.
there was an error and now my device stuck in Mi logo. I can still access Mi bunny fastboot ( vol down + power)
So far I have tried 3 methods
Method 1: reboot to fastboot mode, plug to pc, open ADB cmd prompt and type fastboot oem EDL. But no success because device is still locked bootloader.
Method 2: reboot to fastboot mode, plug in to pc, download fastboot EDL cmd from xda forum, unzip then run edll.cmd, device reboot to mi logo again.
Method 3: in Mi logo, plug in to pc, open cmd prompt, type Adb reboot edl, press enter but device cannot reboot to edl mode because it says I need to tap on confirmation dialog on device. But its not possible since device only load up to mi logo
Click to expand...
Click to collapse
Did you unlock developer mode as in my case I am also stuck in bootloop and fastboot oem edl is not working as developer mode is disabled thus oem is also disabled.
Hey!
I had the same Problem.
Flashing with Miflash was unsuccessfull and then EDL was locked. You can check this when the device is in fastboot and send "fastboot oem edl". Then there may be the message that EDL is locked. In that case you have to build a "deep flash cable". It is pretty easy. You can check this tutorial:
http://en.miui.com/thread-310325-1-1.html
But I would build it another way: Just cut a USB cable and reconnect all wirepairs with the open copper. Now you can just put "ground" and "data+" togehther and follow steps 7 to 9. At point 10 you can just disconnect the wires "ground" and "data+" again, so that all wires are connected normally again. Now you are in EDL and can flash with MiFlash.
3 months back i hv flashed fastboot rom successfully. but now i stuck with different problems with no solution
1) mobile is dead, when i hold power button mobile screen blink for a second and off again
2)when mob is dead i cant go in developer option and do all that stuff
3)in fastboot mode when i type command "fastboot oem unlock" it shows error
4)when bootloader is locked i cant flash fastboot rom through mi flashtool
this all happen because of choosing wrong patched_boot file at the time of installing magisk manager.
cmd cammand only recognize my device but cant unlock. i find only one solution that is test point method. before i proceed to that need suggestion from u gye's should i go for testpoint or to service center coz mobile is still under warranty.
You can flash stock ROM in edl mode with locked bootloader.
Put phone in fastboot mode and type "fastboot oem edl".
You should be able to flash stock ROM with Miflash. If your device is not recognised update your drivers. Google for qualcomm qloader drivers.
Next time before flashing a modified boot.img try to only boot it and see if it works.
I was a running my Redmi note 7 with DerpFest rom and with Ofox custom recovery
The phone suddenly got into a bootloop and now I can only access the fastboot screen (not even the Custom recovery screen)
How can I proceed to reinstall the sistem and the Custom Recovery?
I've already downloaded Minimal ADB and fastboot ulitily to make things faster
Edit: Also, I couldn't get the MiFlash program working, some errors are happening
advanced_gamerBR said:
I was a running my Redmi note 7 with DerpFest rom and with Ofox custom recovery
The phone suddenly got into a bootloop and now I can only access the fastboot screen (not even the Custom recovery screen)
How can I proceed to reinstall the sistem and the Custom Recovery?
I've already downloaded Minimal ADB and fastboot ulitily to make things faster
Edit: Also, I couldn't get the MiFlash program working, some errors are happening
Click to expand...
Click to collapse
Just copy the ZIP file of the ROM and flash, as you dos when you first installed. Maybe just wipe caches
advanced_gamerBR said:
I was a running my Redmi note 7 with DerpFest rom and with Ofox custom recovery
The phone suddenly got into a bootloop and now I can only access the fastboot screen (not even the Custom recovery screen)
How can I proceed to reinstall the sistem and the Custom Recovery?
I've already downloaded Minimal ADB and fastboot ulitily to make things faster
Edit: Also, I couldn't get the MiFlash program working, some errors are happening
Click to expand...
Click to collapse
Try to reflash the recovery with fastboot first. Need to have xiaomi usb drivers installed to can use adb/fastboot connection. When the phone is in fastboot mode connect with a good (original) USB cable and check the connection with "fastboot devices" command in cmd/powershell window. Extract and use "recovery.img" from latest orangefox zip file. Flash to phone using "fastboot flash recovery recovery.img" command then reboot holding together "Volume Up + Power" until you see the MI logo, release "Power" button but keep pressing "Volume Up" until you see the recovery. When you have working orangefox recovery, try to flash new rom. More information about driver/fastboot/recovery here (skip "unlock the bootloader" part): https://forum.xda-developers.com/redmi-note-7/how-to/one-redmi-note-7-unlock-bootloader-t3890751
The MiFlash program issue can be caused by missing/wrong xiaomi usb driver, if you will have answer from "fastboot devices" command (phone detected), can try the MiFlash again, just be careful: DON'T LOCK the BOOTLOADER. Good luck.
Hello, I really need someone to help me out.
I wanted to flash Pixel Experience on my Redmi K20 Pro so I unlocked the Bootloader and flashed TWRP using ADB tools.
Later I cleared the internal storage by mistake using TWRP without knowing that it would clear my OS too.
But once I cleared my internal storage, even TWRP was missing.
Now I don't have an OS and TWRP.
Every time I reboot, I enter into Fastboot mode. When I use the command "fastboot devices" it lists my device.
And when I flash TWRP, it gives me a Positive response but when I use Power + Vol Up, it just restarts and enters Fastboot mode.
I really want this to be fixed. If there's any way please help me out guys.
Download your device fastboot rom and install with mi flash tool
Download TWRP from here: https://twrp.me/xiaomi/xiaomimi9t.html
Then use the following commands:
adb reboot bootloader
fastboot devices
fastboot flash recovery twrp.img
fastboot reboot twrp.img
Now TWRP should be flashed and you can try to flash PE again.
Audiowaste said:
Download TWRP from here: https://twrp.me/xiaomi/xiaomimi9t.html
Then use the following commands:
adb reboot bootloader
fastboot devices
fastboot flash recovery twrp.img
fastboot reboot twrp.img
Now TWRP should be flashed and you can try to flash PE again.
Click to expand...
Click to collapse
He has 9t pro...
I see, this topic was opened in the forum for the 9T.