YT5760B CarPlay issue - Android Head-Units

Hey just got my YT5760B after I bricked my YT9260B... and I took this one beacuse of the built in CarPlay but for some reason its doesnt work...
Already went into the factory settings-USB settings: and turn off and then on the CarPlay tab, did a factory rest, using an oem Apple cable straight to the system(with no adapters or something like that).
Please if someone can help?
BTW: saw this firmware huafei_YT5760B_ui1_5760B2G-ota-v1.65 somewhere and this guy said its solve some problems for him but its a downgrade for me cause I have the 1.68

have similar unit YT5760B on v1.70 firmware. Looks like firmware had some changes on how it works with carplay around v1.66 but mine (v1.70) works as follows. Took me awhile to figure how to make carplay work. Basically just lack of user manual. There are 2 ways. Wired and wireless
Wired
- Connect iPhone via Apple lightning cable to the USB plug with the 6pin connector to the HU
- startup zlink app
- thats all
Wireless
- Connect iPhone via bT to the HU
- startup zlink app
- zlink will auto config a wifi link between HU and iphone for carplay
- thats all
My zlink (v3.8.34) also supports Android Auto. Was able to connect Android via wired link to both USB ports. Haven't yet figured out how to do wireless.
A couple of notes on carplay
- wireless CarPlay definitely has more latency on phone calls compared to an USB link or just plain BT to HU.
- firmware offer no ability to control (or add a gain offset) to carplay. Thus switching between carplay phone calls and HU's radio is quite a problem. See my post here
XY Audio AC8259 zlink volume quite a bit lower than other HU sources
HU's radio, local media, bT volume are all quite a bit higher than CarPlay sounds (calls, music, siri) via zlink. So when listening to HU sources (eg radio) and a phone call comes in on CarPlay, need to increase volume to hear the call. When the...
forum.xda-developers.com
Here is a long thread on various firmware versions and how carplay is handled. It seems there is/was a way to auto startup carplay without zlink and with zlink so wired only and including wireless
(16) AC8257 CPU Based unit's problems & questions - Couldn't find any info about it | Page 4 | XDA Forums (xda-developers.com)

Related

PX6 - Android 8.1 - Bluetooth

Hi all,
I have a PX6 for a BMW (from AliExpress - model CCT-BBA22B07) and i've been trying to figure out how to enable and use the bluetooth for more than phone calls and media streaming. I want to connect it to a bluetooth ODB2 device.
The PX6 seems to use some of the original headunit's functions and along with some of its own Android features and functions. For example, i can use the original HU for FM radio, CD, Bluetooth for phone calls, etc. while using the Android for other functions like navigation (and any other android app i can think of).
So i ignored the Android bluetooth for the phone and continued using the original HU bluetooth. However, i've been trying to use the Android Bluetooth for ODB2. I've bought a bluetooth dongle (CSR 4.0 usb dongle) hoping that the PX6 will detect it. However, i can't seem to switch on the Bluetooth on the settings. depending on the Bluetooth App i use, it immediately switches off (1ms on, next millisecond off), or it gives an error saying "permission denied"
I tried telling the PX6 to use the Android Bluetooth instead of the HU bluetooth, just to see if the "Factory settings app" prevents control of the Bluetooth, but i can't find the Android bluetooth on my phone (i'm contacting the seller regarding this).
So now that you have the background, basically, i want to continue using my original HU bluetooth for the phone, and i want to have a full featured Bluetooth on the Android device (like a tablet would have). Any ideas on how this is possible? I'm hoping there's no need to strip the screen and remove electronic components from the PC boards?
wow, I have a similar issue, I am suprised NOONE knows anything. xtrons sucks for support

Dasaita HA-2186-MAX10 Bluetooth Low Energy

I have the above head unit fitted and working fine in my car but I have an engine management device that contains a bluetooth low energy module in it. I would like to connect to this module via the provided app however it appears my head unit does not see or connect to BLE devices.
Does anybody know of a USB type device that I can connect to the head unit which will provide the ability to connect to BLE devices?
I'm using standard Dasaita android 10 and 3.69C.
Thanks
I have a similar issue. I have an Axxess signal processor which you make adjustments to it through Bluetooth. The processor connects to my phone but won't even be seen by my head unit (Dasaita max10). These head units only seem to recognize a phone or (select) obd dongles. It's pretty basic. I have been looking for ways to expand this, but so far unsuccessful.

Connect more than 1 iPhone to Zlink possible?

Hi,
I just got my Android Head Unit installed in my car with Zlink to use Carplay. I am an experienced computer and iPhone user but have never worked with Android or an Android Head Unit. Can I and if so how do I connect a second iPhone to Zlink and Carplay?
only one device can be displayed
makiavelic1 said:
only one device can be displayed
Click to expand...
Click to collapse
I know that because I have Carplay in my other car. But both I and my wife use this car and I can't find where/how to connect her phone too? When Carplay opens there are no such options so it must be in Zlink somehow?
that is in the iphone carplay settings and the radio automatically connects to the last paired device
I understand that but where do I add the second phone? Shall I turn mine off and let Zlink look for a new phone?
I have a problem that people can barely hear me on the phone. The Carplay volume was also very low but that I managed to fix with Siri talking and at the same time increase the volume on the steering wheel. Also it takes a very long time before Zlink / Carplay starts when starting the car. The guy I bought it from asked me to reset the unit.
First time I used it I connected wifi in Zlink but now on a video i saw the guy connected hot spot in Android. Which way should I use now after resetting the unit?
And thanks for your help!
you = I understand that, but where do I add the second phone? Do I turn mine off and let Zlink search for a new phone?
=yes, cancel your pairing and let the second phone connect
Ok got it. Can I make other settings in Zlink by opening the app?
not much
You forgot to tell me where I should connect my wifi? To Android system as hot spot or in Zlink option? My unit has a SIM card installed if that makes any difference?
The Bluetooth as I understand I will connect on OEM phone app?
carplay works with wifi and bluethoo transmission the sim is only to give internet to the android system (google maps etc) not for carplay actually carplay is on your mobile and mirrors your radio
the rest already in google
makiavelic1 said:
carplay works with wifi and bluethoo transmission the sim is only to give internet to the android system (google maps etc) not for carplay actually carplay is on your mobile and mirrors your radio
Click to expand...
Click to collapse
So I should connect both Bluetooth and wifi to Zlink / Carplay?
I don't remember any option to connect BT on Zlink?
I found out today that people can't hear me using Carplay phone because the Android unit uses a built-in microphone on the screen and not Mercedes OEM.
Is this normal?

AndroidOS and CarPlay - BT Connection Disconnected After CarPlay Handshake

Hello Everyone,
I am a new AndroidOS user and recently had a friend help me install a head-unit to my Audi A4. The head-unit is similar to the following model:
Audi/Seat | Qualcomm 665| Android / iPhone | Octa Core | 6GB RAM &128GB ROM | Integrated 4G Solution | IQ82A4AL
XTRONS IQ82A4AL is a brand new Octa-core car sereo for Audi/Seat with Qualcomm 665 6GB RAM 128GB ROM Integrated 4G solution plus the latest in-car entertainment features premium quality built-in DSP, CarPlay & Android Auto and more.
xtrons.com
Background:
I have noticed that when I INITIALLY pair my iPhone to the Android head-unit over BT, it will ask me to pair on my iPhone (which I confirm), and then switch to CarPlay automatically. At this point everything dealing with CarPlay is handled over Wifi (not BT), but if I go back to the main AndroidOS UI, and check if my BT is still paired, is it DISCONNECTED. I am also able to confirm that the BT connection is disconnected on my iPhone as well. Each subsequent connection, as soon as I turn on the car and it connects to my phone (over BT), it switches to CarPlay, and then the BT disconnects. I would have assumed the BT connection would still be active and paired at this point.
Question:
Is the BT connection being disconnected (after CarPlay is initialized) expected behavior? I chatted with my friend who is an Android-Auto user, and he said with his setup (using similar head-unit), the BT connection is ACTIVE even after Android Auto takes over control.
Any feedback on how this is supposed to work for Apple iPhone users, utilizing the CarPlay functionality, would be greatly appreciated. If I could provide any additional information on my side, to assist with troubleshooting, please let me know.
Thanks,
Asif
TTT

Amase Audio MTCH Headunit Bluetooth

trying to solve either wired carplay or bluetooth with higher end obd2 connectors and doesnt seem to connect to them. i went into factory settings and bluetooth is set to fsc bw124 i tried a bunch of different ones but to no avail. bluetooth does work for my phone and cheeper obd2 via bluetooth and that one is named "obd2" the other is named "veepeak"
wireless carplay works rather well, but wired i think has worked once or twice randomly.
model QCM6125 octa core 6gb
MCU version is MTCH_HT_V3.94_1
running android 12
kernal 4.14.190

Categories

Resources