The reason for all this is because I had followed a guide to give root permissions with magisk, I did everything right, only that the guide was with Android10, while I had Android11 and I was deceived by the fact that in the title of the guide there was written "guide 2021"
, so I did not check the compatibility of operating systems, I was a fool, I know, I hope so much that I did nothing irretrievable, it's my son's tablet!
I have the problem with a Tab S6 Lite, it is in bootloop and does not let me enter the recovery mode, I can go into download mode and I flashed the latest original firmware Android11, Android10 etc., . I tried them all but always goes in bootloop, and also the bootloop occurs only if I connect the usb cable to the PC, without any sign of life. Do I still have hopes or have I compromised the motherboard?
Related
Wanted to find some deleted videos on my device and found some aplications that needed root to work ,
so I installed odin , downloaded some root and flash device , odin said "PASS" but my S7 were stuck at booting screen(just showing logo)
I restarted it ,tried everything from safe mode to factory reset , didn't boot , tried to flash one more time , it was stuck at connecting ,
so I made my phone brick , what can I do to fix this if I even can ?
I know im idiot I had 0 skill with this but I was saving for a long time to get this phone and this shall not be our last moment.
Model SM-G935F
I was using root from rootjunkysdl site, (Samsung_G935x_EX_Rooted-BOOT.zip)
I would realy appreciete any help since on reddit and android central my thread is ignored.
download samsung drivers to your computer, connect to smart switch click on more then emrgerency initialization and recovery follow instructions.
Im not trying to recover files , im trying to unbrick my phone
SmartSwitch has a phone firmware recovery option also.
Sent from my SM-G935F using Tapatalk
Go to sammobile and download the latest firmware for your phone. Hold volume down, home and power to boot into download. Connect phone to PC and use Odin (if Linux use Heimdall) to Flash the firmware. If you need more guidance you can find info on here or Google about flashing with Odin on our device.
Samsung Galaxy J5 Prime - SM-G570F
Build - MMB29K.G570FXXU1AQB5
OS - Android Marshmallow 6.0.1
I tried to root the OS. I managed to connect to ODIN and did a recovery from a recovery file shared over internet. However that recovery has a password pattern which didn't allow me to access my phone. After several attempts phone showed a message saying that phone will reset to factory settings. After which phone stuck at Initial LOGO.
Please provide some inputs in getting my phone operational.
Dear Experts, Please help!
android_sriniram said:
Samsung Galaxy J5 Prime - SM-G570F
Build - MMB29K.G570FXXU1AQB5
OS - Android Marshmallow 6.0.1
I tried to root the OS. I managed to connect to ODIN and did a recovery from a recovery file shared over internet. However that recovery has a password pattern which didn't allow me to access my phone. After several attempts phone showed a message saying that phone will reset to factory settings. After which phone stuck at Initial LOGO.
Please provide some inputs in getting my phone operational.
Click to expand...
Click to collapse
There may be two things which may be done
1. Since you've done factory reset The first boot may take some time so wait for 20min and make sure it's working
2. If it's not working yet . Then the recovery file you've have flashed is wrong or you've flashed in the wrong partition . There is also chance that you've interupted the process.
These flashing tools are somewhat complicated I've faced many problems because if any settings weren't set correctly then it would mess all your mobile and also the version you use is very important..
So, contact the developers who are working for the specified mobile for more help. Because they would have over come these issues .
Suggestion:- Never Experiment the odin on your mobile without knowing the every detail before
So I gifted my mother a Galaxy Tab (SM-T355Y) a few years back and it was behaving fine until a few weeks back. Now it gets in an infinite bootloop when we try turning it on (I see the black screen with Galaxy Tab written in white, and it boots again and again) and it simply won't budge. I cannot access recovery in this state as pressing the required buttons still keep me in the loop.
Now flashing the stock firmware on Odin would be the logical go-to in such case, but I cannot get Odin to recognize the device when plugged in on Download mode. I keep getting a message saying 'Windows doesn't recognize the device', but it recognizes my S10 perfectly and I did install all necessary drivers when I had plugged in my S10 for the first time.
I think the drivers for both S10 and the Tab should be the same. Am I missing something here? I hate it when I'm not able to fix an android device myself, but I seem to have hit a roadblock in this case.
PS: I don't come from a tech background and I've learnt all things android on XDA, so excuse any gaps in my understanding.
Cheers!
Hi,
I'm not sure I'm posting in the right section but, I had a really bad experience upgrading to android 10. Really sluggish and slow... so I tried to downgrade to android 9 by using Lenovo's Rescue and Smart Assistant.
What I did, is to find the stock ROM for my model, and replace the files downloaded by the Rescue Assistant (which downloaded the latest firmware). The process went through, but now the device wont power on.
When I plug in the USB, windows makes a sound, the charging light comes on, but The rescue Assistant nor SP flash tool is able to flash the latest firmware.
Is it bricked for good?
Model : TB-XF606F
Hardware number : 60
Maybe your computer doesn't recognize your tablet. Did you ever try using sp flash tool with your tablet before? You can try reinstall or install a driver for your table if you haven't done it yet.
Well the tablet is recognized as the "mtk vcom..." in device manager. I guess it is the driver that the lenovo rescue app installed.
I have never used sp flash tool with my tablet, just the lenovo rescue.
I tried on 2 different pc and it is the same thing. I think the problem is that I can't turn off the tablet properly, even though, all I can see is a black screen.
I will try to drain the battery by keeping the power button pressed with some scotch tape. I don't know what I can do else.
Edit: I tried a few other times with flash tool using different setting for the connection (with battery and full speed) and nothnig happened. But now windows says it does not recognize my tablet.
did the same thing exactly. . bricked lenovo m10 fhd plus x600v after i flashed a downgrade version. dont try to downgrade this thing. i had already flashed it with 3 or 4 versions the same way , but when i chose to flash the oldest version available with the model , this tab got completly unresponsive , no feedback when try to boot into recovery, fastboot, or system . neither does it gets recognised in windows or anything - device manager dowsnt recognise this usb device ( in device manager properties comments it reads- USB\DEVICE_DESCRIPTOR_FAILURE). if you find a way to reflash the device please let us know. good luck .
Bricked mine after being completely running smoothly on Lineage, then was messing around trying to get gapps installed and jacked up the partitions. TWRP said no OS. Kept messing around and mistakenly locked the bootloader again with apparently an unverified boot partition. . I couldn't get SP Flash tool to work ever either. Pretty sure it's a door stop now.
guys i have a little problem with my samsung s10 +..
i wanted my smartphone unroot and flashed the original firmware with odin, initially the android 10 version,
unfortunately after the flash the display came after the start "erase" and android always shows a black screen afterwards....
Had tried it with the android 11 version but unfortunately the same result....
I get into the download mode and recovery mode but android just doesn't start in the operating system and I wonder why.
does any of you have a solution for it?
mhhh nobody?
Do you have the same problem as I described here
Samsung S10 + bootloop ERASE FAIL: READ ONLY
Samsung S10 + SM-F975F/DS IMEI stating Taiwan (Update: Very contradicting information if the phone is Snapdragon OR Exynos) if it even matters to solve the issue I dont know Owner of the above since 2019 without issues; USB debugging mode...
forum.xda-developers.com
So far I had no luck finding someone
still no one here to find the solution