Related
I have a ZyXEL P-2602HW-D1A Wireless router. I have tried all combinations of security, even NO SECURITY WHATSOEVER, and still the device won't transfer data.
Not working;
Firmware: 1.5, Build: CR817
Wifi Router: ZyXEL P-2602HW-D1A
Security: Tried All; WPA2, WPA, WEP & None.
Problem: Connect under all conditions but no data is sent
Please help.
Have you tried another WiFi access point to check the devices WiFi module actually functions?
No, I haven't tried that yet, but don't really see the point... I've connected effortlessly to the same WiFi network with my HTC Touch Diamond.
jbelman said:
Have you tried another WiFi access point to check the devices WiFi module actually functions?
Click to expand...
Click to collapse
For some reason my N800 wouldn't connect to MY ZyXEL P-2602HW-D1A unless I set the device (N800) to disable any kind of wifi powersaving features it had.
On another note, how did you get your hands on the device so early? I'm guessing you are using a Cybercity internet connection? (I'm in copenhagen myself)
edit: I actually came to that solution when i noticed I could connect to OTHER accespoints, but not the Zyxel ones.
Same problem here in France with a Freebox as router
I've noticed under the router's WLAN client list that the device does not have a "Host Name". Would that present a problem?
It is assigned an IP address by the router without any problems, though.
Also the device seems to lose connection and reconnect constantly (every 5-10 seconds).
I done some digging around in the router settings and found an "AnyIP" feature. Would that possibly help?
There are a number of issues floating around. Support for WPA2 seems iffy and some people can just change to WPA or WEP and all work fine.
There are however a number of people (such as me) who can get a connection perfectly, it shows connection OK, they get an IP from the DHCP server etc, they can even browse a page for a few seconds... but after that no data is sent and everything times out. This is happening on any security from none through to WPA2.
I have seen no solution to this anywhere and believe me I have looked. Some people have given up and got a new router, but this is not a solution.
Can someone confirm that this has been recognised as a fault with the magic and is being investigated, rather then assuming it's a user or router error. There are far too many instances of this across many brands of router for it not to be an issue with the HTC Magic.
zyborg said:
No, I haven't tried that yet, but don't really see the point... I've connected effortlessly to the same WiFi network with my HTC Touch Diamond.
Click to expand...
Click to collapse
What I mean is have you tested the device on ANY other AP except the ZyXEL?
No, but since I'm by far the only one having this issue (try searching the web; see my last post), I didn't feel it was necessary. Just want some input from xda-dev that might solve the problem, if any.
jbelman said:
What I mean is have you tested the device on ANY other AP except the ZyXEL?
Click to expand...
Click to collapse
I've had exactly the same problem earlier with the N800 on the zyxel. Exactly how you describe it.
Did you find out if you could turn off any powersaving features on the HTC?
same problem here
in france with a freebox
I don't exaclty know what router is in the box
but I have excalty the same
I set on never the wifi sleep(powersaving) mode.
i found it in setting wifi menu button then advanced and "never"
but the problem is still here
zyborg said:
There are however a number of people (such as me) who can get a connection perfectly, it shows connection OK, they get an IP from the DHCP server etc, they can even browse a page for a few seconds... but after that no data is sent and everything times out. This is happening on any security from none through to WPA2.
Click to expand...
Click to collapse
I have the exact same problem on mine. I just hope it is not a hardware issue...
Could be DHCP lease time problem. Did anyone of you tried to set up Magic with Static IP?
Yes, I tried that also - didn't help one bit.
TheRookie said:
Could be DHCP lease time problem. Did anyone of you tried to set up Magic with Static IP?
Click to expand...
Click to collapse
I also have this problem. Im in Denmark with a Zyxel P660HW-p1.
Another user of Cybercity in Denmark with the same problem.
ZyXEL P-660HW-D1
The android is the only device that doesn't work. I have tried with Iphone and laptops.
I've tried to change the settings on the router to no avail.
Enable 802.11g+ mode [on/off]
RTS/CTS Threshold [2432/4096]
RTS/CTS Threshold [2432/4096]
Max. Frame Burst [600/1800]
The device shows up in the device list with no hostname, the HTC Magic gets the right ip address (using the program WhatIsMyIp to view it)
I had the same problem before, when I set my TP-LINK draft N router with WEP security my HD can see it, connect to it (but speed was slow tho), and my HTC Magic just keep saying its not in range. However, when I set it to open security it works, so I recognise its probably the security setting... so I changed that to WPA2 and then it works.
In my case, I see different device have different tolerance to some settings (in my case, draft N + WEP is OK with laptop, HTC HD, but not Magic), so its still worthwhile to try a few different settings, and try a public wireless access point also to double confirm?
Power save?
I have Zyxel (P-2602R-D1A) router.
I had exactly the same problem with my HTC Vox (winmo)... but that was solved by boosting the WiFi in the phone.
WiFi -> Best performance
So Im guessing magic is in some WiFi "power save" mode...
I dont know how this works, but I thought maybe you could change some WiFi settings behind the hood - that is if the hardware is capable of it.
Zyxel (P-2602R-D1A) router
I am having the same issue with this router as the other posters. The phone connects perfectly and reports an excellent signal, but barely sends or receives any data. I have used a terminal emulator to ping the router and it reports an 82% packet loss. This must be a big problem for many Danish users as it is the standard wifi router provided by two of the major ISP's.
same issue here with my vodafone uk magic.
wifi connects and i can browse for a few seconds then get a connection error and can't browse until i re-start wifi on the magic...
i've actually given up using wifi at home now due to this.
router is a talktalk supplied Huawei Echolife HG520b using 128 bit WEP
i can connect fine via wifi at the office so i don't think it's an issue with the handset, just with certain routers or router configs...
this issue has been reported on the vodafone uk forums but as yet no solution.
http://forum.vodafone.co.uk/index.php?showtopic=31937
Hi All,
Just got my new HTC HD2 from Virgin, however I cannot for the life of me seem to connect it to my home WiFi (I've not tried it elsewhere yet).
I've still got my MDA Compact IV here with me and use the same settings as the HD2 and that connects first time no problems, but the HD2 isnt playing ball!
It sees my wireless network at home (full strength) and starts to connect then simply says "Available". No notification of incorrect wireless key etc...reported.
I have used my Compact IV side by side with the HD2 and no issues so I am puzzled as to what I need to do now
Any help would be appreciated.
Thank
Are you sure you didn't set up some MAC address filter in your wireless access point?
kilrah said:
Are you sure you didn't set up some MAC address filter in your wireless access point?
Click to expand...
Click to collapse
I've not enabled MAC address filtering on the router at all, just simple wifi security key access.
Flash a new radio?
(check my sig under hspl flashing guide)
if you are using wep, heres something to try.
routers can be set to three types of wep key
open
open or shared
shared
in my experience if you areset to the middle one, "open or shared" mobile devices can have trouble connecting.try setting it to just "shared"instead.
course it could just be my router but I have seen this behavior in three mobiles including my hd2.
Current router settings is WPA-PSK [TKIP]. I even tried turning off security and got nothing My router is Netgear WGR614v9 - it came with my Virgin broadband deal.
Current ROM version is 1.48.405.2 (71294) WWE and radio version 2.05.51.05.2
Its most annoying that the HD2 on the face of it seems like a really good handset but then I cant get the Wifi connected which most basic handsets have no issues with
Any other possible solutions?
I got the same problem
I have the exact same problem.. Cant connect to my AP with my leo... got no mac secure on, even if i remove my security(WPA/wep or whatever), it will not connect...
I had the same issue when I applied hint 39 from http://forum.xda-developers.com/showthread.php?t=583638
Result: couldn't connect to my network with WPA2.
After restoring the parameters everything is OK.
Right finally got it working!
Installed the Touch_X_Wireless_Draft_N_ON.cab cab and then uninstalled it and now it seems to work.
Cab can be found here: http://forum.xda-developers.com/showthread.php?t=584415
Hope that helps others out too
I had this issue too, could see my home Wifi network, but the device would just say, "Incorrect Network Key". But it was correct!
I now have it working strangely by changing router Security Options to (WPA-PSK + WPA2-PSK)
Connects with no hesitation now!
my advise is disabling WEP password in both HD2 and the router.
it works perfectly.
"Incorrect Network Key" problem
Bro you made my day! I spent whole day to figure out a solution to the exact problem. I wish I had seen your reply before. When I changed my cable modem's setting as suggested and encryption to AES, it worked
Thanks again.
spyralmale said:
I had this issue too, could see my home Wifi network, but the device would just say, "Incorrect Network Key". But it was correct!
I now have it working strangely by changing router Security Options to (WPA-PSK + WPA2-PSK)
Connects with no hesitation now!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=959764
"When you connect to wifi on your phone, open terminal emulator and do a ping to your PC's IP address, or use any ping app (I am using Net Ping from market). As soon as you start to ping your PC, connection is immidiatelly opened. I have no idea why it is like that, but for now I am using this method when I want to use FTP server on HD2...."
Hello all,
I love my X10, but the frustration with getting it to connect to my Netgear DG834 router was getting to me, so I dedicated an afternoon to working out a solution and I've found one that works for me, so I hope it'll work for you too.
Summary of problem
--------------------
The phone will connect to the Router once, and once only. Any attempt to re-connect to the wifi will result in the phone disconnecting, scanning again, then discinnecting until the user gives up. Nothing will cause the phone to reconnect (telling it to forget the connection for example). The only surefire way to reconnect is to reboot the router each time - not ideal.
Manually adding a Static IP also doesn't work - which is weird as that is how I've solved it, see below.
Scale of problem
----------------
The problem seems to be with the router and not necessarily the phone as it appears to be on a wide range of phones (Hero, Droid, Touch HD etc.). Seeing at the DG834 is the most popular router in the world, and Android is growing all the time, there are a large number of people affected.
However Iphone and Symbian phones appear to be unaffected.
Reason for the problem
-----------------------
Currently unknown, but appears to be something to do with the handshaking procedure when a device asks the router for an address (DHCP) - though as to what I don't know.
Solution
--------
1) Download an app called WiFiStatic from the App Market. WiFiStatic takes each DHCP assigned IP address and stores it in a small database to be re-applied whenever you are back in range of the same Router again. It is not an ideal solution as you may have to re-scan and re-assign if you visit a busy hotspot, but this is a two press function, so it's not that onerous.
2) Turn off your Router. Make sure the WiFi on your phone is off too.
3) With the router off, clear your Remembered WiFi connections (or at the very least the Netgear connection). Once that's done, turn the Router on again and wait until it is full back up again.
4) When the Router is fully operational again, turn on your wifi on the phone and let is scan for and connect to the Netgear Router. You may need to tell it to connect from the Wireless Settings menu on the phone.
5) The phone should now connect to the Router successfully. If it doesn't, repeat the above procedure.
6) With the phone connected to the router, fire up WiFiStatic. Check Auto Switch and Show Visual Prompt if they are not already selected, then Tap Add configuration at the bottom of the screen.
7) The IP address and other settings assigned by your router should be displayed at the top of the screen, at the bottom should be the name of your router and its MAC address. If not then tap Menu > Generate to populate the form.
8)Tap Menu > Done when everything is ok.
That's it. Now when you move into range of your Netgear, you should get connected, though it does take a bit longer than normal (the Router still wants to assign an address first before accepting the static IP). You can speed this up by changing the Device table on the router to always keep the Phone's static IP open.
This shouldn't work as all my other attempts with Static IP failed, but I've had five days now of instant connection to WiFi at home, so something has been freed up.
i can not tell you how seeing this post was like finding bin ladin in the white house. Prob would have found him twice trying to solve this WIFI problem. And the strange thing is this is the 1st phone i have had that there are so few posts about it...is everyone on that icrack? scary. cheers to you...
Thank you for posting this.
I tried this with my and it seems it doesn't make a difference for me. I still can only connect once to the router and for me to connect again i have to restart the router again. Am i missing something?
Problem is when I connect for the first time at home it works then when i leave to the office i use the wifi there and never have any problems there but when i get back home it doesn't work. Do you guys switch the wifi off manually when you are not using it?
one thing that is almost always overlooked is updating the router's firmware. this usually solves a number of issues. I dont know about netgear but it's worth a try to update
bimmerboii said:
one thing that is almost always overlooked is updating the router's firmware. this usually solves a number of issues. I dont know about netgear but it's worth a try to update
Click to expand...
Click to collapse
That was one of the first thing i tried....it seems i have the latest firmware.
Is this an issue for a lot of people then? Ive one of these routers and never had an issue connecting any phones to it. Had 3 nokias and 3 different android phones, currently on the x10, and they all connected fine everytime.
i have some troubles in x10i wifi connection and holp someone helps me~
------------------------------
im chinese, my x10i have had the lastest firmware but the phone cant connect the AP which set the channel is "13". but i used it long before and suddy just one day i find it dosnt work~ it cant scan(and find) the AP anymore !
then i have tried and config the router in another wifi channel(just like 1,8,11..) and the phone can scan and refind the AP.
i have tried to reload the phone's default setting,but it dont work(in channel 13)ToT
---------------------------
someone tell me why? and someone give me some suggest?
in china , lots of router's wifi channel are using "13" by default(factory setting);so, if my x10i cant works in that channel means i couldnt find the "opend APs" which in the public place(like KFC~~)
THX to help~
StampedChipmunk said:
Hello all,
I love my X10, but the frustration with getting it to connect to my Netgear DG834 router was getting to me, so I dedicated an afternoon to working out a solution and I've found one that works for me, so I hope it'll work for you too.
<snip>.
Click to expand...
Click to collapse
Thank you! I have spent three days trying to get my phone to re-connect to a DG834v5.
Your solution has worked! I had gone as far as reserving an IP address on the router and linked it to the MAC of the phone... no dice. The phone would connect once and then never again until the router was reset. Really irritating because I have two PPPoe connections running through the router with a routing table that has to be re-loaded via telnet every time the router is reset. I was considering a new phone or a new router.
HI,
I have near the same problem.
But I found out that when I remove on the access point the hidden function ( SID ) then it works perfect.
so that is a bug in the ROM of the X10, I have the R2b026.
At the moment everone can see my Access Point but I can live with that solution.
Worked for me! Many many thanks this had been infuriating me...
Same problem here - never had an issue with any other router, so I blame Netgear...
Let's just hope this works - it's been driving me crazy for the past 5 days...
Neh, hasn't worked for me....
Stupid freakin' Netgear...
works on the HD2 aswell. Thanks alot!
Not just Netgear, maybe Android
k1sr said:
Same problem here - never had an issue with any other router, so I blame Netgear...
Let's just hope this works - it's been driving me crazy for the past 5 days...
Click to expand...
Click to collapse
I am having the same issue on my HD2 Android 2.3.4, connecting to a D-Link DIR-635. If I use Static IP, everything is fine...
WORKS! I can't believe it, finally i can disconnect and connect without having to reset my router everytime. BIG thanks man!
alright, it worked fine for the first 5-6 hours. then it went back to not connecting without rebooting the router. this problem happens only with my home router, at work i can connect fine, as well as in other places.
any thoughts or solutions? i mean it did work in the beginning, then why did it stop? shall i change my router?
P.S.: i noticed that every time i connect to my home router i get the same IP address and all the stats are the same.
I've tried several builds:
Darkstone Froyo
DarkStone FroyoStone
mattc Froyo with Sense
mattc Froyo without Sense
shubcraft
Xcelsior
mccm v1.7
WiFi just does not work at home. It'll connect, but I can't actually browse anything. It comes back immediately as a "page not found" error. Today I took my phone around town specifically to test WiFi on other networks. It worked perfectly on two open networks. There were no issues at all. It works at my office as well.
My network at home is wired as:
Internet --> DLink Gamer Lounge (wired router with special features) --> Linksys WRT54G wireless router
The DLink has DNS and DHCP services. The Linksys has none and is assigned a static IP.
My network at work is wired as:
Internet --> DLink Gamer Lounge --> everything else including a Linksys WRT54G setup just like at home
There is a Windows Server setup to take care of DNS and DHCP. The Linksys has same setup as at home.
At home, I disconnected the DLink, enabled DHCP on the Linksys, then my Android phone worked on wifi just fine.
I reconnected wired router and reset all settings. Android wifi doesn't work anymore.
I don't think my wired router is incompatible. I'm wondering if the wireless router not being the DHCP agent has anything to do it. Other wireless devices connect fine like this. My phone in WinMo connects fine. My friends' iPhones connect fine. My friends' native Android phones connect fine. Every wireless device (except HD2 Android) connects to the network and works just fine.
Anyone have any suggestions?
Is there a route tracing program for Android? Or something that will show me all the IP information (including DNS)?
Update:
DarkStone1337 said:
Because you have no DHCP on your wireless router, your IP address and DNS server and default gateway settings aren't being set by Android. No idea why. You'll need to do this manually in Android by pressing the windows button in the wifi network settings and setting the right values from there.
Click to expand...
Click to collapse
I just used an app to check IP settings. IP address, subnet mask, gateway, DNS, and everything are being set properly (there is a DHCP server on network, just not on WiFi router). I tried to setup a static IP address and other settings. Whenever I try to connect that way, it gets to "Obtaining IP address" and then fails, cycling through the whole process. Is it possible the code for IP stack (or IP Tables) in these builds of Android are not complete?
Update 2:
DarkStone1337 said:
Not an app, but using ADB logcat is sufficient enough.
If you have adb set up then follow this: https://sites.google.com/site/androidhowto/how-to-1/save-logcat-to-a-text-file
Click to expand...
Click to collapse
Just read about ADB (Android Debug Bridge) briefly. I think this will be a bit out of my league. I'm not that familiar with Android / linux. I'll post in the other thread asking if someone else more skilled can grab one. If not, I'll see about trying to figure it all out this weekend.
Same issue
FreakyFerret said:
I've tried several builds:
Darkstone Froyo
DarkStone FroyoStone
mattc Froyo with Sense
mattc Froyo without Sense
shubcraft
Xcelsior
On all of them, WiFi just does not work. It'll connect, but I can't actually browse anything. It comes back immediately as a "page not found" error. Today I took Matt's Froyo with Sense around town specifically to test WiFi on other networks. It worked perfectly on two open networks (Quizno's and McDonald's). There were no issues at all.
My network was wired as
Internet -- Wired router (with special features) -- wireless router
The WiFi router was basically treated like a switch with its DHCP turned off. I disconnected the wired, enabled DHCP on the wireless, then my Android phone worked on wifi just fine.
I reconnected wired router and reset all settings. Android wifi doesn't work anymore.
I don't think my wired router is incompatible. I'm wondering if the wireless router not being the DHCP agent has anything to do it. Other wireless devices connect fine like this. My phone in WinMo connects fine.
Anyone have any suggestions?
Is there a route tracing program for Android? Or something that will show me all the IP information (including DNS)?
Edit: It should be noted other Android phones (that came with Android) do work fine. Just these HD2 builds is the problem.
Click to expand...
Click to collapse
I just want you to know I'm in the same situation as you. My router is a Belkin Wireless N router (WPA2 encryption). I get a valid IP address and I can ping the router but no DNS or access past the router. There was an earlier version of an Android build (I think a MattcFroyo) that worked with my wifi set-up. But I need BT headset support and the Darkstone build seems to be the only one that reliably works with my BT devices. (BlueAnt T1 & Motorola EQ7)
Please let me know if you find a solution that works!
Thanks.
Sept 4 Update. The only version that I have found that provides both Wi-fi connectivity and BT head set is the Shubcraft version 1.4 for my router configuration. Version 1.5 doesn't and neither do the latest Mattc and Darkstone builds.
Hell, I can't even get my Wifi working at all. Darkstones V1... Wifi just says "Error". Have the latest zImage, and everything. :/
Shushunmire said:
Hell, I can't even get my Wifi working at all. Darkstones V1... Wifi just says "Error". Have the latest zImage, and everything. :/
Click to expand...
Click to collapse
jinhenry, I'll let you know.
Shushunmire, are you using HD2Froyo or FroyoStone (clean or Sense)? Also be sure to post in Darkstone's thread that relates to the build. I know HD2Froyo v2 was giving error for wifi, but his latest update fixes that.
I tried various market apps to do network diags on the phone. All they offered was basic ping. When trying to ping anything on the wifi, it just fails right away. It's like it's not even seeing the network and just saying no network around. I even tried to ping the phone's own local IP and it failed. I tried looking for a traceroute type app, but there was none.
I installed Cirtex app. On cell connection, it pulls up the IP info of the wifi (but cell data works):
Device IP Address:{cell IP}
Interface name:/usb0(usb0)InetAddress:/{Ip of wired router, DHCP server, DNS server}
Interface name:rmnet0(rmnet0)Inetaddress:/25.1.238.x (don't know)
Interface name:lo(lo)InetAddress:/127.0.0.1
On wifi connection, it gives error:
Can not get te IP Address for the device. (errors their's)
Interface name:eth0(eth0)InetAddress:/{correct wifi ip}
Interface name:usb0(usb0)InetAddress:/{correct wifi ip}
Interface name:lo(lo)InetAddress:/127.0.0.1
If I use a static IP, and set the gateway to the actual network gateway (wired router, DHCP server, DNS server), phone tries to connect until it gets to the "Obtaining IP" stage, then it fails and cycles over. If I set the gateway to the wifi router (which is no more than a wifi access point) it will connect.
To repeat cause I know you have a lot going on: other wifi devices work on this network fine (using static or dynamic ips) including windows laptops, mac laptops, xbox, Wii, iphones, winmo phones (this one even), and even other android phones.
If I set the wifi router as the gateway (plug internet directly into it and turn on DHCP on wifi router), everything works fine. I don't even change its static IP.
Hopefully some of this will help. :/ The more I play around with it, I get the feeling the IP stack is the cause.
I AM HAVING THE SAME PROBLEM!!!! my lil bro got an htc hd2 as well n we got them the same day n when i flashed android on his and mine... his wifi was working while mine was not and i have tryed so many different builds but nothing solves the problem...it searches but at the end it says unable to scan networks....anyone plz help i really need wifi
p.s we both are on....
rom: core cell series
build: hd2 froyo v2.1
his hd2 works perfect while my wifi is not
jinharry said:
I just want you to know I'm in the same situation as you. My router is a Belkin Wireless N router (WPA2 encryption). I get a valid IP address and I can ping the router but no DNS or access past the router. There was an earlier version of an Android build (I think a MattcFroyo) that worked with my wifi set-up. But I need BT headset support and the Darkstone build seems to be the only one that reliably works with my BT devices. (BlueAnt T1 & Motorola EQ7)
Please let me know if you find a solution that works!
Thanks.
Click to expand...
Click to collapse
have you tried setting the router to use G only? i had an issue with the newer builds on a d-link 635 that was the same, it woudl work then suddenly woudnt work at all, rebooting the phone didnt help, changing the router to use G only instead of mixed seemed to fix the issue
Here's my issue. On my phone I could connect to wireless fine, my two sons liked Android on the hd2 so much that we picked up 2 more hd2's, that's where the problem started. Any one of the phones can work on wireless just fine... but try and connect any of the others and while they do connect, they don't work. Any of them.
It's almost as if they are seen as the same device or something. Some kind of unique id is missing or something.
Ducter said:
Here's my issue. On my phone I could connect to wireless fine, my two sons liked Android on the hd2 so much that we picked up 2 more hd2's, that's where the problem started. Any one of the phones can work on wireless just fine... but try and connect any of the others and while they do connect, they don't work. Any of them.
It's almost as if they are seen as the same device or something. Some kind of unique id is missing or something.
Click to expand...
Click to collapse
are they using the same builds? its possible that the mac address being used is the same and the router sees it as the same device
Richy99 said:
have you tried setting the router to use G only? i had an issue with the newer builds on a d-link 635 that was the same, it woudl work then suddenly woudnt work at all, rebooting the phone didnt help, changing the router to use G only instead of mixed seemed to fix the issue
Click to expand...
Click to collapse
Didn't help Thanks for suggestion though.
unless it has changed recently, all HD2-android builds are using the same MAC-address. So this could very well be your problem.
Ducter said:
Here's my issue. On my phone I could connect to wireless fine, my two sons liked Android on the hd2 so much that we picked up 2 more hd2's, that's where the problem started. Any one of the phones can work on wireless just fine... but try and connect any of the others and while they do connect, they don't work. Any of them.
It's almost as if they are seen as the same device or something. Some kind of unique id is missing or something.
Click to expand...
Click to collapse
FreakyFerret said:
jinhenry, I'll let you know.
Shushunmire, are you using HD2Froyo or FroyoStone (clean or Sense)? Also be sure to post in Darkstone's thread that relates to the build. I know HD2Froyo v2 was giving error for wifi, but his latest update fixes that.
Click to expand...
Click to collapse
I'm using FroyoStone (w/Sense).
And yeah, will do that. I just figured it wasn't working at all until I saw your post.
I use currently mattc 1.5b w/sense and had (have) the same problem with
DHCP is on. I allways got the status "Obtaining IP address" and nothing happen.
I played a little bit with the static IP settings...I set DNS 1 equal the the gateway entry and then wifi works....but only static.
I think this is a router issue...I use Speedport W 502V.
I doubt it's a router problem since all other devices work perfectly.
same issue, please give your attention, developers, thanks.
I've had the exact same problem with my Wi-Fi using several Android builds. Tried static IP and every possible setting I could find and solved it by add the Mac-adress in my router setting. (192.168.1.1) and now it works perfectly. I'm now using shubCRAFTv1.3
Hope you can fix your problem this way. Cheers.
Sent from my HTC HD2 using XDA App
I'm having issues with Wifi too. I'm also currently using mattc Leo + Froyo w/Sense 1.5b. My problem isn't that the phone doesn't connect via wifi... it does. The problem is that after it connects the connection seems to go dead/times out after about a minute or two.
For example, after installing the build and running through the setup, i connect to wifi, then sign in with my gmail account. This all works as it should. Then by the time I want to sign in to my facebook/twitter accounts during that same setup sequence, it no longer can connect to the internet. My suspicions of the connection having a "timing out"-like occurrence was then confirmed when I turned off wifi, and switched it back on. Everything would work and sync for about a minute, then it would cut out again (but it would still show a full strength connection via wifi). It's a bit of a strange one.
I used Energy's build before trying this one, and WiFi worked flawlessly. So I'm assuming its not my router, but something up with my device and/or its settings.
Thanks in advance for any tips/help.
snozze said:
I've had the exact same problem with my Wi-Fi using several Android builds. Tried static IP and every possible setting I could find and solved it by add the Mac-adress in my router setting. (192.168.1.1) and now it works perfectly. I'm now using shubCRAFTv1.3
Hope you can fix your problem this way. Cheers.
Click to expand...
Click to collapse
What do you mean by you added your phone's MAC address to the router? Where exactly in the router? Guessing you mean you set your phone to use a static IP, then set your router's DHCP client to always assign that IP to the phone?
wibblewobbles said:
I'm having issues with Wifi too. I'm also currently using mattc Leo + Froyo w/Sense 1.5b. My problem isn't that the phone doesn't connect via wifi... it does. The problem is that after it connects the connection seems to go dead/times out after about a minute or two.
For example, after installing the build and running through the setup, i connect to wifi, then sign in with my gmail account. This all works as it should. Then by the time I want to sign in to my facebook/twitter accounts during that same setup sequence, it no longer can connect to the internet. My suspicions of the connection having a "timing out"-like occurrence was then confirmed when I turned off wifi, and switched it back on. Everything would work and sync for about a minute, then it would cut out again (but it would still show a full strength connection via wifi). It's a bit of a strange one.
I used Energy's build before trying this one, and WiFi worked flawlessly. So I'm assuming its not my router, but something up with my device and/or its settings.
Thanks in advance for any tips/help.
Click to expand...
Click to collapse
sounds like the same issue i had, i had to set my router to use G only rather then mixed g/n to fix the issue
FreakyFerret said:
I've tried several builds:
I don't think my wired router is incompatible. I'm wondering if the wireless router not being the DHCP agent has anything to do it. Other wireless devices connect fine like this. My phone in WinMo connects fine.
Anyone have any suggestions?
Edit: It should be noted other Android phones (that came with Android) do work fine. Just these HD2 builds is the problem.
Update:
I just used an app to check IP settings. IP address, subnet mask, gateway, DNS, and everything are being set properly (there is a DHCP server on network, just not on WiFi router). I tried to setup a static IP address and other settings. Whenever I try to connect that way, it gets to "Obtaining IP address" and then fails, cycling through the whole process. Is it possible the code for IP in these builds of Android are not complete?
Click to expand...
Click to collapse
I had problems before with a similar setup, and I can tell you that NOT having the DHCP on the router (gateway out) is the issue. You have to remember that "these HD builds" are still in development with WIFI issues still being ironed out.
My advice, try using fixed IP assigning (on wireless router) using the phone's wifi adapter mac address.
Right now your phone is going to the wifi router who will be sending packets to the DHCP server and back to wifi router so that it goes out. Also usually, there tends to be a conflicts because some DHCP clients just assume that the server for DHCP is the gateway too.
or... Check that your DHCP server (if another machine) is doing internet sharing, in case devices try to use its address as a gateway, which will then go out anyway through the wifi router.
The fact you report may be in my oppinion, useful for the devs (eventually), but dont get high hopes for this to be on the immediate to-do list
<<< SOLVED >>> (See my last reply)
Hi,
I am kinda out of options now as I have tried all the known fixes and some for the dreaded cannot obtain IP address / Internet may not be avalable problem...
I have a Samsung Galaxy S8 and this problem only occours on my home WIFI (Vodafone) - when I go to my friends house who has SKY it works flawlessly...
-------------------
Clearing the google play services cache used to allow the cannot obtain IP address to not happen - but since the AUG 1 update it now wont unless I set a static IP / DNS.
either way no matter what I do it always stops at Intenet may not be avalable and its not joking - I really have no internet.
---------------------
I have tried....
Factory Resetting the phone / Phone Cache / Google Play cache.
Set statip IP and DNS correctlly - (Using both the default gateway IP and google DNS servers - and even mixed them up to see)
Set up the guest IP on my router / Set up a 2nd and even 3rd router as a second and third Access Point (One being a SKY router like where it worked at my firends) - correctlly. (Using both static and DHCP)
All the normal forget network / reset network settings in the phone.
- I was looking for the WIFI thing in developer optons as well thats about on the net - I do not even have that opton in developer option.
--------------------
Main problem is - execpt at my friends house and elsewhere (So i can connect if the conditions are right it seems) -- DHCP is outright broken since the AUG 1 update (and was befoe if you didnt clear the google play cache after a factory reset) - and results in "Cannot obtain IP address" (Even though the router says it has one)
Setting a static IP moves past cannot obtain IP address - but then gets stuck on "Internet may not be avalable" and gives me no internet as well when i try to load a page.
--------------------
I don't know what else to try now I am litterlly at the end of my teather (If you parden the pun)
Thank you in advance if you have any ideas.
Oh and I might like to add - nothing else has any problem at all connecting to these wifi networks - computers nor other android phones - but none that are the S8.
Fishcake
fishcake2020 said:
Thank you in advance if you have any ideas.
Oh and I might like to add - nothing else has any problem at all connecting to these wifi networks - computers nor other android phones - but none that are the S8.
Fishcake
Click to expand...
Click to collapse
long shot here, but have you tried a different router on your internet connection?
youdoofus said:
long shot here, but have you tried a different router on your internet connection?
Click to expand...
Click to collapse
That is definitely my next try - but that's only going to work if a SKY router works on a Vodafone ISP connection - then maybe there is a chance - but its defo something with the S8 this is a known bug - and its the only thing having any problems - everything else works just fine - even on the other APs I set up - even on the SKY AP it does it - that is connected as a secondary router right now - and not on the main connection but that was what i was going to try next but we cant expect everyone to change their routers just because they have an S8 - this is slightly rediclous the S8 has this bug / problem when other devices do not - and it may be in software.
fishcake2020 said:
That is definitely my next try - but that's only going to work if a SKY router works on a Vodafone ISP connection - then maybe there is a chance - but its defo something with the S8 this is a known bug - and its the only thing having any problems - everything else works just fine - even on the other APs I set up - even on the SKY AP it does it - that is connected as a secondary router right now - and not on the main connection but that was what i was going to try next but we cant expect everyone to change their routers just because they have an S8 - this is slightly rediclous the S8 has this bug / problem when other devices do not - and it may be in software.
Click to expand...
Click to collapse
i have 3 routers in my house and there is one PS4 that gets all butt hurt about it having been restricted from the internet and then unrestricted. Its weird because it can still see stuff on the local network even after rebooting the router and PS4. Now, this would be one of those "WTF???" things if it wasnt for the fact that we have another PS4 which is very close in serial numbers to the one that has issues and its flawless. We also have 2 more wifi networks that this doesnt happen on. The router is a Netgear Nighthawk, so its not a POS either. So, i dunno. Some devices can be picky i guess
Just tried to use the Sky router with vodafone broadband and no luck - and I see no way of changing or getting any usernames or passwords for those routers....
It just says connecting on the sky router and never connects since it is a different ISP i imagine.
I am stuck with a phone I cannot even use at home with the internet now - can't even use it because I can't even bring up google.
what do you think I should do - cos the phone is pretty much useless to me without the internet.
Um yeah I managed to fix the problem...
I didn't realise I had MAC filtering on in two places in the router and not just the WI-FI Section - that was dumb.
Turned it off and everything is now fine - connected first time! - sorry Samsung! and sorry i got you all wasting your time on this...
And for anyone else that has tried everything else - check mac filtering in your router - and in every page!
Thanks for helping and everything is sorted now!
Fishcake