Related
Introduction:
This is a list of all known OTA's for the Spice Dream Uno
The Dream Uno has it's ROMs built directly by Google, instead of Spice.
Click to expand...
Click to collapse
File List:
None Yet
Click to expand...
Click to collapse
How to flash:
Requirements:
Stock recovery
Unmodified /system
Unmodified /oem
Unlocked bootloader
Basic understanding of command line/shell
Unlock your bootloader
Download and set up adb and fastboot
Reboot into fastboot mode
Open up a command prompt/shell where you saved fastboot
enter into command prompt/shell: "fastboot oem unlock"
Enter recovery mode via onscreen buttons
Enable recovery ui
(How do you do this for this device?)
Set up adb
Select apply update from adb
enter into command prompt: "adb sideload <path to saved update.zip>
Click to expand...
Click to collapse
FAQ:
How to find the ota?
If you're rooted, wait for the device to prompt you to update, then check /cache for the file
If you're not rooted, wait until the same time and do an adb logcat and look for a line with .zip in it
Why isn't the latest ota listed?
We can only list what we have, if the ota from Build X to Build Y isn't listed, we dont have the file for it yet.
How do you setup adb/fastboot
Please read the stickies in the general subforum, this is not a formal guide
Do I need to unlock the bootloader to flash the update zip?
Yes, if you wish to do it manually.
If you allow android to prompt for the update, you do not need to unlock
Can I flash this if I have a custom rom?
No, you must be on a stock AND unmodified rom
Can I flash this if I'm rooted?
Only if you have not modified any files
Click to expand...
Click to collapse
Credits:
Click to expand...
Click to collapse
Changelog:
Sep 21, 2014: Initial page
Click to expand...
Click to collapse
2char
can anybody give me backup of rom
If anyone has seen an ota recently, please let me know.
There is an android-4.4.4_r4 listed on AOSP, and KPW53 should be 4.4.4_r3.
Either it is an ota or another device launched with a newer rom.
[A2017U - B29] "Fastboot Flashing Unlock" returns "Unknown Command" in ADB
Hi !
Quick info: I am not a novice when it comes to rooting / unlocking bootloader / installing TWRP or CWM / installing Xposed Frameworks, etc
I will make this short and sweet.
My Info :
- Axon 7 Gold - A2107U (US variant) with Update B29 installed (A2017UV1.0.0B29)
- Minimal ADB and Fastboot
- Windows 7 x64 Home premium
Here are the steps I have done:
1-
I installed the ADB drivers and Qualcomm WWAN drivers on my computer.
2-
Under Developers settings, I have enabled "OEM Unlocking".
3-
Using Axon7backup.exe, I created 2 backup files: "stock_recovery_backup.img" and "stock_boot_backup.img"
4-
Rebooted in bootloader using "adb reboot bootloader", (my device was listed). I first tried "fastboot oem unlock" then tried "fastboot flashing unlock", both returning "Unknown Command".
HERE IS WHERE I AM CONFUSED:
Normally, anyone would Unlock to bootloader THEN install TWRP, but from what I've seen with Axon7, some people say that Installing TWRP is "required" to unlock the bootloader.
I've seen some say that they have successfully rooted / unlocked bootloader with the B29 update, but I don't see any zip files or threads for the B29.
Could anyone enlighten me on the steps that I (and many others) have to do in order to Unlock the Bootloader and be able to install TWRP and Xposed Framework (and root).
Thank you !
Could anyone enlighten me on the steps that I (and many others) have to do in order to Unlock the Bootloader and be able to install TWRP and Xposed Framework (and root).
Thank you ![/QUOTE]
Ok so the long story short is that the bootloader is not unlockable out of the box. When ZTE released the bootloader unlock, they released a separate ota for it called B20_boot from B20 which modified the fastboot image. It didn't make sense for a lot of people for ZTE to release a separate OTA since it would not allow them to recieve future otas (such as B29) so they are working on a new bootloader unlock. So since you are on B29 and the bootloader is not unlockable out of the box and you cannot update to B20_boot since you are not on B20 this is what you do:
1) I am assuming you already have the tool downloaded since you used it to create the backup files so just follow the same instructions to boot into edl mode, then open a command window where the tool is located. Then execute:
Code:
axon7backup.exe
to start the tool and then
Code:
axon7root.exe -p # -r
where # is your COM Port # in Device Manager. The tool will flash the signed version of TWRP with ZTE's signature from the leaked firehose onto your Axon 7.
2)Hold down volume up and power to exit download mode and boot into recovery which should now be TWRP.
3) Download the bootloader unlock zip from @DrakenFX: https://www.androidfilehost.com/?fid=529152257862665656. Flashing the zip will replace your fastboot image with the one from B20_boot.
4) After you have flashed the zip, reboot to bootloader and just execute
Code:
fastboot oem unlock
and you are good to go!
^^The stock fastboot does not support the unlocking command. There's another fastboot image in the bootloader unlock thread that gets flashed first. *THEN* you can issue the unlock command.
I've been messing with android at least since late 2009 and have seen many variants of unlocking processes. This one is new for me too.
bkores said:
Ok so the long story short is that the bootloader is not unlockable out of the box. When ZTE released the bootloader unlock, they released a separate ota for it called B20_boot from B20 which modified the fastboot image. It didn't make sense for a lot of people for ZTE to release a separate OTA since it would not allow them to recieve future otas (such as B29) so they are working on a new bootloader unlock. So since you are on B29 and the bootloader is not unlockable out of the box and you cannot update to B20_boot since you are not on B20 this is what you do:
1) Go to this thread: http://forum.xda-developers.com/axon-7/development/wip-axon-7-root-bootloader-unlokced-t3441204. Download @tenfar's tool for A2017U B20(axon7root.exe not axon7backup.exe). There is no tool for B27 or B29 because the OP is no longer active but it will still work(I have tested.)
Click to expand...
Click to collapse
I see that the release a "axon7root-us-b27.zip" here: http://d-h.st/kRgq
"Uploaded By: tenfar
Uploaded On: 2016-09-19 23:10:07"
Should I use the B27 or follow the B20 method ?
EDIT: Should I do following command ?: reboot disemmcwp (to remove protect write, or it's no longer necessary? )
Boutchoo said:
I see that the release a "axon7root-us-b27.zip" here: http://d-h.st/kRgq
"Uploaded By: tenfar
Uploaded On: 2016-09-19 23:10:07"
Should I use the B27 or follow the B20 method ?
Click to expand...
Click to collapse
I edited my original answer. Since you already have axon7backup.exe you don't have to download the tool. And yes you should do "reboot disemmcwp" if you want to be able to make changes to /system
bkores said:
I edited my original answer. Since you already have axon7backup.exe you don't have to download the tool.
Click to expand...
Click to collapse
Nice ! TWRP is now installed !
I was wondering, if I backup my DATA only using TWRP and restore them after doing "fastboot oem unlock", will I be able to get my apps back without breaking my system ?
EDIT: After doing "Fastboot oem unlock", TWRP gives me "Mount: Decrypt Data: Enter Password:"...
EDIT2: Ok now Android is locked... it's asking me to enter a password *NEVER MIND- FORMATED CELL, NOW WORKS*
Edit3: Do I need to flash SuperSU or is it pre-packaged ?
Boutchoo said:
Nice ! TWRP is now installed !
I was wondering, if I backup my DATA only using TWRP and restore them after doing "fastboot oem unlock", will I be able to get my apps back without breaking my system ?
EDIT: After doing "Fastboot oem unlock", TWRP gives me "Mount: Decrypt Data: Enter Password:"...
EDIT2: Ok now Android is locked... it's asking me to enter a password
Click to expand...
Click to collapse
Did you just flash TWRP using -r or flashed the boot image as well using -b? Because if you just flashed TWRP the data decryption thing should not have happened. For some reason ZTE screwed up encryption to the point where if you backup data in TWRP with a pin/password/pattern enabled and then restore from it you will get a data decryption prompt where no password would work, not even your own. If you get this you have no choice but to wipe your data and then do either a Google restore during setup or use Titanium Backup(after you flash SuperSU) if you have it. In the future if you want to backup your data and until ZTE fixes it, you have to disable your pin/password/pattern first.
bkores said:
Did you just flash TWRP using -r or flashed the boot image as well using -b? Because if you just flashed TWRP the data decryption thing should not have happened.
Click to expand...
Click to collapse
I copy pasted your line "axon7root.exe -p 8 -r" only, did nothing else.
Also, do I need to flash SuperSU for the root or is it pre-packaged ?
Boutchoo said:
I copy pasted your line "axon7root.exe -p 8 -r" only, did nothing else.
Also, do I need to flash SuperSU for the root or is it pre-packaged ?
Click to expand...
Click to collapse
Flash SuperSU
bkores said:
Flash SuperSU
Click to expand...
Click to collapse
When I flash SuperSU-v2.78-201609011115.zip from my SD Card, it crashes TWRP.
Boutchoo said:
When I flash SuperSU-v2.78-201609011115.zip from my SD Card, it crashes TWRP.
Click to expand...
Click to collapse
You need SuperSU v2.65 as any other version will crash TWRP(no one knows why)
bkores said:
You need SuperSU v2.65 as any other version will crash TWRP(no one knows why)
Click to expand...
Click to collapse
Ah, I see. It's weird !
Also, what does flashing the boot (-b) does with the Axon 7 ? It's weird that only recovery (-r) is necessary.
Boutchoo said:
Ah, I see. It's weird !
Also, what does flashing the boot (-b) does with the Axon 7 ? It's weird that only recovery (-r) is necessary.
Click to expand...
Click to collapse
The modified boot image allows people without an unlocked bootloader to have root however if your bootloader is unlocked you should not do it as you will have the data decryption issue.
Boutchoo said:
When I flash SuperSU-v2.78-201609011115.zip from my SD Card, it crashes TWRP.
Click to expand...
Click to collapse
Try 2.65
hi guys, my computer ( wins10) donset read adb device.
but i i use fastboot commands its able to list my devices, but ' adb devices' shows none listed? i am suck, might have soft brick it, able to boot into stock recocery. any suggestions?
oneplus 5 phone.
What are you trying to do?
Rhoban said:
What are you trying to do?
Click to expand...
Click to collapse
Was trying to update , but got stuck at boot screen .
Just flash the stock ROM with the stock recovery.
I can’t sideload it, “ adb not working “
Rhoban said:
Just flash the stock ROM with the stock recovery.
Click to expand...
Click to collapse
Files all courupted
With stock recovery you can't use adb sideload in windows 10.
If you're unlocked i would flash Codeworkx TWRP, download the OOS 5.0.1 Full Rom Zip, boot into TWRP, copy the zip to your phone or sideload the zip.
If you're not unlocked (and thus being unable to flash twrp) use windows 7 and sideload the zip.
You can download ADB drivers here
Can you boot? Turn on USB debugging , make sure that you allow the device when booted.
Do an advanced devices when in the OS make sure it's there.
Then you can install a TWRP recovery and do what you need to.
maikvitesse said:
With stock recovery you can't use adb sideload in windows 10.
If you're unlocked i would flash Codeworkx TWRP, download the OOS 5.0.1 Full Rom Zip, boot into TWRP, copy the zip to your phone or sideload the zip.
If you're not unlocked (and thus being unable to flash twrp) use windows 7 and sideload the zip.
You can download ADB drivers here
Click to expand...
Click to collapse
Hi bro, I am unlocked ! I mange to find a win7 pc. I ran both commands “adb devices” and “Fastboot devices”
Both shows me my devices number hence drivers are working fine.
Now do I flash twrp and sidleload? Because I can’t sideload in stock “error: *cant read zip*”. Do advice me!
PS: can boot into OS, no OS in system only recovery . USB debugging was on before boot loop happens! Thanks for all advices !
maikvitesse said:
With stock recovery you can't use adb sideload in windows 10.
If you're unlocked i would flash Codeworkx TWRP, download the OOS 5.0.1 Full Rom Zip, boot into TWRP, copy the zip to your phone or sideload the zip.
If you're not unlocked (and thus being unable to flash twrp) use windows 7 and sideload the zip.
You can download ADB drivers here
Click to expand...
Click to collapse
dladz said:
Can you boot? Turn on USB debugging , make sure that you allow the device when booted.
Do an advanced devices when in the OS make sure it's there.
Then you can install a TWRP recovery and do what you need to.
Click to expand...
Click to collapse
Hi ! USB debugging was turn on before boot loop happened. Can’t boot into OS , only recovery
lolitsryan96 said:
Hi bro, I am unlocked ! I mange to find a win7 pc. I ran both commands “adb devices” and “Fastboot devices”
Both shows me my devices number hence drivers are working fine.
Now do I flash twrp and sidleload? Because I can’t sideload in stock “error: *cant read zip*”. Do advice me!
PS: can boot into OS, no OS in system only recovery . USB debugging was on before boot loop happens! Thanks for all advices !
Click to expand...
Click to collapse
be sure your bootloader is unlocked
turn your phone into fastboot
open command prompt to the folder your twrp is in.
rename the twrp image file to recovery.img
do the following command: fastboot flash recovery recovery.img
after that boot into recovery
press adb sideload
on the computer, open command prompt to the folder where your zip file is in.
rename the rom zip file to rom.zip
do the following command: adb sideload rom.zip
done!
Thanks bro, I shall update you on the situation once I done, at work now.
Do I need to “open command promt “ at my sdk folder/plat-form tools?
maikvitesse said:
be sure your bootloader is unlocked
turn your phone into fastboot
open command prompt to the folder your twrp is in.
rename the twrp image file to recovery.img
do the following command: fastboot flash recovery recovery.img
after that boot into recovery
press adb sideload
on the computer, open command prompt to the folder where your zip file is in.
rename the rom zip file to rom.zip
do the following command: adb sideload rom.zip
done!
Click to expand...
Click to collapse
hi bro, sideload failed i think, i cant find sideload file. when the sideload end. its gave x1.00 something like that.
maikvitesse said:
be sure your bootloader is unlocked
turn your phone into fastboot
open command prompt to the folder your twrp is in.
rename the twrp image file to recovery.img
do the following command: fastboot flash recovery recovery.img
after that boot into recovery
press adb sideload
on the computer, open command prompt to the folder where your zip file is in.
rename the rom zip file to rom.zip
do the following command: adb sideload rom.zip
done!
Click to expand...
Click to collapse
attach image, successfully sideload but phone still in bootloop?
lolitsryan96 said:
attach image, successfully sideload but phone still in bootloop?
Click to expand...
Click to collapse
you need to wipe everything before flashing
maikvitesse said:
you need to wipe everything before flashing
Click to expand...
Click to collapse
just wipe, now re-sideloading. how it works. bloody nightmare dude.
maikvitesse said:
you need to wipe everything before flashing
Click to expand...
Click to collapse
still stuck at the boot loop, any advice
maikvitesse said:
you need to wipe everything before flashing
Click to expand...
Click to collapse
hi brother finally did it!
my oneplus 5 was encrypted totally forgot about hence need to wipe full back to factory stage, learn my lesson the hard way really grateful for your help!
ps; i am going to Holland on may-june for my euro trip! any places of interest in Holland?
lolitsryan96 said:
hi brother finally did it!
my oneplus 5 was encrypted totally forgot about hence need to wipe full back to factory stage, learn my lesson the hard way really grateful for your help!
ps; i am going to Holland on may-june for my euro trip! any places of interest in Holland?
Click to expand...
Click to collapse
nice good to hear!
haha, well tourists like Amsterdam so do visit that and visit The Hague/Scheveningen. I like these 3 places the most I think. Look up TripAdvisor for good attractions once you're there. do visit 'The Amsterdam Dungeon' don't miss that, I liked it very very much!
how to install the drivers?
maikvitesse said:
With stock recovery you can't use adb sideload in windows 10.
If you're unlocked i would flash Codeworkx TWRP, download the OOS 5.0.1 Full Rom Zip, boot into TWRP, copy the zip to your phone or sideload the zip.
If you're not unlocked (and thus being unable to flash twrp) use windows 7 and sideload the zip.
You can download ADB drivers here
Click to expand...
Click to collapse
Cannot adb to the phone in FASTBOOT. adb devices shows nothing when in FASTBOOT, but shows the device when in normal boot.
Hence I cannot upgrade TWRP from 3.2.1-1 to 3.2.3-0. Was trying this so to upgrade from beta23 to the beta 26, now 27 with which 3.2.1-1 seems to have problems.
A 2nd approach, just re-installing beta23 without Magisk18 gives the stock recovery which manages the beta27 install. But then I'm blocked from a Magisk18 install and still cannot use FASTBOOT mode to put TWRP back on.
Thought the adb drives could be old and sought new drivers, even assuming your link is to the most current I don't know how to get my Windows7 to use the zip file. Can you assist? This would let me put the latest TWRP, hence install Magisk18 and be rooted again!
Hello, I was curious if anyone could help me with unbricking my phone, my phone has no custom recovery installed, the bootloader is apparently unlocked (OEM unlocking is disabled), FRP lock is enabled, I cannot flash anything (Command not allowed), relock bootloader (Root type is at risk), Unlock bootloader (Command not allowed), any help would be appreciated.
Edit: I also cannot boot a from a recovery img locally using fastboot (Command not allowed)
EDIT: Fixed it using DC Pheonix and flashing VNS-L22C636B140 OEMINFO and flashing B160
Hi, try my way. https://forum.xda-developers.com/showpost.php?p=77307223&postcount=30 Just pick CxxxBxxx that suits your model. Try to unlock bootloader again via SRKTool, I think FRP must be unlocked too...
Check this also: https://forum.xda-developers.com/huawei-p9lite/help/p9-lite-bricked-please-help-t3415275
4uvak91 said:
Hi, try my way. https://forum.xda-developers.com/showpost.php?p=77307223&postcount=30 Just pick CxxxBxxx that suits your model. Try to unlock bootloader again via SRKTool, I think FRP must be unlocked too...
Check this also: https://forum.xda-developers.com/huawei-p9lite/help/p9-lite-bricked-please-help-t3415275
Click to expand...
Click to collapse
I cannot flash anything, so any of these do not help, thanks for trying I guess
wheellzzz said:
I cannot flash anything, so any of these do not help, thanks for trying I guess
Click to expand...
Click to collapse
Are you sure you run from inside the folder where adb.exe and fastboot.exe is? Boot to bootloader and use terminal pointed to fastboot.exe. Shift+right click -> open command line here. Make sure your devices is listed: adb devices. If device is shown: adb reboot bootloader, to reboot to bootloader. If not, install adb drivers / huawei drivers.
4uvak91 said:
Are you sure you run from inside the folder where adb.exe and fastboot.exe is? Boot to bootloader and use terminal pointed to fastboot.exe. Shift+right click -> open command line here. Make sure your devices is listed: adb devices. If device is shown: adb reboot bootloader, to reboot to bootloader. If not, install adb drivers / huawei drivers.
Click to expand...
Click to collapse
Yes I am sure, also, I have no way to access ADB since there is no recovery on the phone.
Only thing I can do is boot to that eRecovery screen with the option to download, reboot or shutdown. (Automatticly goes to here), or boot to bootloader
wheellzzz said:
Yes I am sure, also, I have no way to access ADB since there is no recovery on the phone.
Only thing I can do is boot to that eRecovery screen with the option to download, reboot or shutdown. (Automatticly goes to here), or boot to bootloader
Click to expand...
Click to collapse
Well if you can access to bootloader then you able to use fastboot commands. ADB is not related to recovery anyhow, you use windows command prompt to use adb and fastboot. IF FRP is locked, unlock bootloader again. I quiet don't understand how the command are not allowed or so. You are definitely doing something wrong.
4uvak91 said:
Well if you can access to bootloader then you able to use fastboot commands. ADB is not related to recovery anyhow, you use windows command prompt to use adb and fastboot. IF FRP is locked, unlock bootloader again. I quiet don't understand how the command are not allowed or so. You are definitely doing something wrong.
Click to expand...
Click to collapse
The problem is I cannot unlock bootloader again, flash anything or boot into any image in fastboot mode, I always get "ERROR: (Command not allowed)", attempting to relock the bootloader shows "ERROR: (Root type is at risk)"
EDIT: I have done some research for the dload method, If I want to dload to hopefully fix it, I'll need VNS-L22C636B381, but the official link from the hicloud is dead, if anyone could help me with that, that'd be great.
Last EDIT: Ended up scratching the above idea as it didn't work, gritted my teeth as I bought DC Phoenix and will update if it works out with the .APP from the latest package I found on firmware finder.
Hi guys,
I am using Zenfone Max Pro M2. I wanted to install a custom rom and I tried to unlock bootloader but I unlocked it through official unlocktool. Now I can't flash anything or send any command through fastboot, whenever I do then it restarts the device.
When I try to keep the fastboot command running and then connect phone - it throws errors like "Fail - Too many links", "Fail - Write to device fail (No such file or directory)" or "Fail- Unknown command".
I tried unlocking bootloader with the unofficial way provided in https://forum.xda-developers.com/max-pro-m2/how-to/unlook-bootloader-root-asus-zenfone-max-t3885457
but it isn't working either, any fastboot command is rebooting the device although bootloader is unlocked.
How do I fix this?
EDIT: Things I have tried:
- Changing USB Cable and Port
- Reinstalling ADB and device driver
- Reunlocking bootloader from UnlockTool (don't know why I did that again)
- Unofficial way to unlock bootloader
None of it helped.
Thanks
Mr147 said:
Hi guys,
I am using Zenfone Max Pro M2. I wanted to install a custom rom and I tried to unlock bootloader but I unlocked it through official unlocktool. Now I can't flash anything or send any command through fastboot, whenever I do then it restarts the device.
When I try to keep the fastboot command running and then connect phone - it throws errors like "Fail - Too many links", "Fail - Write to device fail (No such file or directory)" or "Fail- Unknown command".
I tried unlocking bootloader with the unofficial way provided in https://forum.xda-developers.com/max-pro-m2/how-to/unlook-bootloader-root-asus-zenfone-max-t3885457
but it isn't working either, any fastboot command is rebooting the device although bootloader is unlocked.
How do I fix this?
EDIT: Things I have tried:
- Changing USB Cable and Port
- Reinstalling ADB and device driver
- Reunlocking bootloader from UnlockTool (don't know why I did that again)
- Unofficial way to unlock bootloader
None of it helped.
Thanks
Click to expand...
Click to collapse
Guys, no one to help or assist?
Mr147 said:
Guys, no one to help or assist?
Click to expand...
Click to collapse
Did u try running the command at the adb folder?shift+right click in adb folder?
Is Usb debugging enabled in developer options?
X10MINISTER said:
Did u try running the command at the adb folder?shift+right click in adb folder?
Is Usb debugging enabled in developer options?
Click to expand...
Click to collapse
Yes, everything done.
Still no success.
Mr147 said:
Yes, everything done.
Still no success.
Click to expand...
Click to collapse
Did ur unlocking bootloader succeed?
Did you try relocking the bootloader ?
1) Try relocking the bootloader using the methods described here :
https://forum.xda-developers.com/max-pro-m2/how-to/unroot-relock-bootloader-max-pro-m2-t3885870
See if it successfully relocks...
If it does, then next time unlock using the unofficial method only...
2) If not then maybe try contacting ASUS... Tweet them on Twitter... Companies usually respond very fast on Twitter, since their reputations are at stake...
3) All else fails then try rooting it using something like Kingroot... Once rooted, flash TWRP Recovery using Flashify... then flash any custom ROM u want...
I hope your problem gets solved... Next time be a little more cautious when taking such a risky step... See what are all the options you have before jumping into something...
X10MINISTER said:
Did ur unlocking bootloader succeed?
Click to expand...
Click to collapse
I guess it did because when I reboot it I get that bootloader unlocked splash screen.
Tyakrish said:
Did you try relocking the bootloader ?
1) Try relocking the bootloader using the methods described here :
https://forum.xda-developers.com/max-pro-m2/how-to/unroot-relock-bootloader-max-pro-m2-t3885870
See if it successfully relocks...
If it does, then next time unlock using the unofficial method only...
2) If not then maybe try contacting ASUS... Tweet them on Twitter... Companies usually respond very fast on Twitter, since their reputations are at stake...
3) All else fails then try rooting it using something like Kingroot... Once rooted, flash TWRP Recovery using Flashify... then flash any custom ROM u want...
I hope your problem gets solved... Next time be a little more cautious when taking such a risky step... See what are all the options you have before jumping into something...
Click to expand...
Click to collapse
Tried everything except 2, none worked. I'll drop them a query over twitter like you say, let's see what their reply is.
I am on stock recovery, non working bootloader but unlocked, and stock rom unrooted.
I think Pie update may give some insight on fixing this.
Mr147 said:
I guess it did because when I reboot it I get that bootloader unlocked splash screen.
Click to expand...
Click to collapse
I see.. did u've try using another laptop/pc? Sometimes antivirus blocking the tools that are needed for unlocking bootloader..
X10MINISTER said:
I see.. did u've try using another laptop/pc? Sometimes antivirus blocking the tools that are needed for unlocking bootloader..
Click to expand...
Click to collapse
I unlocked using official bootloader apk provided by asus. Now I have encrypted phone which isn't decrypting and can't flash twrp.
Mr147 said:
I unlocked using official bootloader apk provided by asus. Now I have encrypted phone which isn't decrypting and can't flash twrp.
Click to expand...
Click to collapse
Hey you said phone is encrypted ? Maybe this might work :
1) Download and install the latest Magisk Manager apk
2) Extract boot.img from stock firmware
3) Put boot.img in your internal storage and open magisk app.
4) Click on install and select patch boot Image.
5) Select stock boot.img file placed in phone memory.
6) Magisk will automatically patch the stock Image and this patched image can be installed using fastboot using this command:
fastboot flash boot patched_boot.img
This will root your phone. After that you can install Flashify to flash TWRP or PBRP
Note:
- This method is highly experimental... There are 50% chances of bootloop. I would not have recommended this method, but situation seems to demand it.
- Your data will most probably be formatted, so keep a backup.
- If it falls in a bootloop, then you need to flash original stock firmware to restore your phone.
Credits: @#ArtFuL
Who came up with this method, but removed it from the main guide, because of being experimental... (I guess)
Mr147 said:
I unlocked using official bootloader apk provided by asus. Now I have encrypted phone which isn't decrypting and can't flash twrp.
Click to expand...
Click to collapse
After going through the errors, I strongly believe that the problem is with your drivers. If reinstalling doesn't works, try a different pc. If your pc detects your device on MTP or your are able to perform adb operations without any hassle, it's not the problem with your phone.
You can decrypt the device only after flashing custom recovery.
---------- Post added at 09:35 PM ---------- Previous post was at 09:31 PM ----------
Tyakrish said:
Hey you said phone is encrypted ? Maybe this might work :
1) Download and install the latest Magisk Manager apk
2) Extract boot.img from stock firmware
3) Put boot.img in your internal storage and open magisk app.
4) Click on install and select patch boot Image.
5) Select stock boot.img file placed in phone memory.
6) Magisk will automatically patch the stock Image and this patched image can be installed using fastboot using this command:
fastboot flash boot patched_boot.img
This will root your phone. After that you can install Flashify to flash TWRP or PBRP
Note:
- This method is highly experimental... There are 50% chances of bootloop. I would not have recommended this method, but situation seems to demand it.
- Your data will most probably be formatted, so keep a backup.
- If it falls in a bootloop, then you need to flash original stock firmware to restore your phone.
Credits: @#ArtFuL
Who came up with this method, but removed it from the main guide, because of being experimental... (I guess)
Click to expand...
Click to collapse
Yes this method is highly experimental. Also in this situation, he cannot use any fastboot commands. So this method won't work
#ArtFuL said:
After going through the errors, I strongly believe that the problem is with your drivers. If reinstalling doesn't works, try a different pc. If your pc detects your device on MTP or your are able to perform adb operations without any hassle, it's not the problem with your phone.
You can decrypt the device only after flashing custom recovery.
---------- Post added at 09:35 PM ---------- Previous post was at 09:31 PM ----------
Yes this method is highly experimental. Also in this situation, he cannot use any fastboot commands. So this method won't work
Click to expand...
Click to collapse
This method didn't work, as fastboot isn't accepting any command. I tried giving command before connecting phone and then connecting, it gives me error of "File size is more than max allowed".
So is it done?
Mr147 said:
This method didn't work, as fastboot isn't accepting any command. I tried giving command before connecting phone and then connecting, it gives me error of "File size is more than max allowed".
Click to expand...
Click to collapse
See I recommend please use Linux (Manjaro or Ubuntu) , Windows will have driver issues forever and ever
had same issue after fota update UL-ASUS_X01BD-WW-15.2016
Tyakrish said:
Hey you said phone is encrypted ? Maybe this might work :
1) Download and install the latest Magisk Manager apk
2) Extract boot.img from stock firmware
3) Put boot.img in your internal storage and open magisk app.
4) Click on install and select patch boot Image.
5) Select stock boot.img file placed in phone memory.
6) Magisk will automatically patch the stock Image and this patched image can be installed using fastboot using this command:
fastboot flash boot patched_boot.img
This will root your phone. After that you can install Flashify to flash TWRP or PBRP
Thanks , this method work me. had same issue after fota update UL-ASUS_X01BD-WW-15.2016.1902.192-user
Click to expand...
Click to collapse
I've the same problem too. Let me know if you've configure it out. Thanks.
Okay @Mr147, I've fix this. I checked Windows Update and there was a pending ASUS driver update. I downloaded it and now I can use the fastboot commands.
Anyone that can fix this problem? I also experience this.
Mr147 said:
Hi guys,
I am using Zenfone Max Pro M2. I wanted to install a custom rom and I tried to unlock bootloader but I unlocked it through official unlocktool. Now I can't flash anything or send any command through fastboot, whenever I do then it restarts the device.
When I try to keep the fastboot command running and then connect phone - it throws errors like "Fail - Too many links", "Fail - Write to device fail (No such file or directory)" or "Fail- Unknown command".
I tried unlocking bootloader with the unofficial way provided in https://forum.xda-developers.com/max-pro-m2/how-to/unlook-bootloader-root-asus-zenfone-max-t3885457
but it isn't working either, any fastboot command is rebooting the device although bootloader is unlocked.
How do I fix this?
EDIT: Things I have tried:
- Changing USB Cable and Port
- Reinstalling ADB and device driver
- Reunlocking bootloader from UnlockTool (don't know why I did that again)
- Unofficial way to unlock bootloader
None of it helped.
Thanks
Click to expand...
Click to collapse
I suggest to Unlock with unofficial step, or read the post https://www.blocknesia.com/2019/04/unlock-bootloader-dan-install-twrp-asus-zenfone-max-pro-m2.html