Hi, sorry for my bad english but i have a problem with the proximity sensor after installing the kernel.
What happens is a small delay of a few seconds, and this ends up interfering with calls and audios on whatsapp
as I'm not very experienced, is there a way to change something in the kernel to reduce this dalay? Or at least help solve it
A detail is that kernel version 3.5 makes my touch not work as it should so I use an older version
thank you all
Model SM-G531BT
Kernel RZv3.4
Related
Hello everybody,
I'm sorry for opening that topic but i'm desperate now. I saw similar topics for that but i tried every written solution on that topics not working.
Last month i've rooted my i9500 first time and flashed CyanogenMod (4.4.2 Kitkat). There were few bugs on this ROM. For example Camera Problem, Low Mic issue etc.. After i used that ROM 2 days, i decided to change my ROM because of bugs. I changed 4-5 ROMs for i9500. ( Phoenix, CyanogenMod(New Version), MIUI etc... But the low mic issue was still there.
I tried flashing Stock Rom 4.3
Flashing Stock New Rom 4.4
Flashing stock Kernel and stock Radio
Flashing other ROMs...
I tried all of them. All problems gone except low mic issue. First I thought something wrong with my hardware but after that i noticed that the low mic issue is just running on Phone Calls. If i open speaker my voice is perfect but in normal call people barely hear me or don't hear me.
Voice recorder and Video Recording is perfectly record sound. The problem is occur only Phone Call without speaker.
So i need your help, how i can solve this low mic issue ?
Thanks for all.
try downloading AudioManager on play store and see if it helps. It could be a hardware problem you know.
cheers ~
I downloaded AudioManager but nothing changed. I guess the problem is not hardware because if i use speaker on phone calls my voice is perfect. Audio recording and video recording are also perfect.
No solutions ?
please help me about this. i tried everything i've read nothing changed.
You've probably got dirt in your microphone hole, locate it on the bottom of the device and use a dental pick or something to clear the blockage.
Perhaps you're covering the microphone hole when you hold up the phone to your ear?
I tried to clean it nothing changed. I'm holding same as i always do . I tried directly speak to mic hole. Nothing changed
Same Issue please help us
I Have same issues, im sure Hardware is working Fine, mic in low volume if using at phone call and record voice note. but in other apps like Audio Record, and Activate Speaker Phone mic is Working properly, S Voice, etc
I also upgrade my device GT-I9500 JB 4.3 with firmware for Russia I9500XXUFNB3_I9500SERFNB3_I9500XXUFNA6_HOME
After that , start my problem with S4 device and microphone NOT working level is so bad and low .... sound is very poor
If I use speaker option mic working good , also if I use bluetooth headset for communication sound work good , normal .
But have problem if I answering and try talk "normally " by microphone .
Today try with other 4.4.2 firmware like I9500XXUFNB7_I9500OLBFNB4
But unfortunately, there is still the problem with my S4 GT-I9500
My mic work good with JB 4.3 but this problem start when upgrade to 4.4.2
Best ,
Z.
can someone edit this..?
same here~
but can someone test or edit file default_gain.conf maybe it will solve our prob
Thanks
(remove .zip)
same weird problem
i9500. on AOSB KK 4.4.4 1.3v mic works fine on phone calls, whatsapp voice, recorder,etc
but on euphoria rom , some builds mic only works in whatsapp and google nw etc and not on phone calls
frapetis CM12 v19build, mic works sometimes in calls, sometime not, sometimes after dialling crazy screetching noise comes, cannot hear the call then nor they can hear me. after 2-3 call attempts, voice becomes fine,and can call with no troubles. but this sh*T keeps happening.
tried going back to TW(AURORA, STOCK) , still same story, mic not working in calls, but in voice recorder
Some builds mic doesnt work only,anywhere.
anyone any help >_<
considering the fact that voice works with KK and problems are only in 5.0/.1 ROMS. tried different modems for lollipop also, still no use
Hello,
yesterday I installed the last nightly snapshot of CM11 on my LG G2 but I noticed the following problems. I hope you could suggest me a solution for them.
During a call, the proximity sensor detect my face and turn off the screen. But when I finish the call or simply when I move the phone away from the ear, the screen remain OFF and I need to double tap to wake it up. I don't think this is an expected behavior.
When I receive an email or SMS/Hangouts, the notification sound looks to be fragmented. The sound starts, then interrupts for some milliseconds and then start again. This is annoying.
No radio nor IR in the ROM. I know, I'm on AOSP kernel, but I really guess that a custom rom for a specific device have to carry on ALL hardware features itself, without to flash or to modify further.
Apart this, CM11 is a GREAT rom.
Can you help me to solve my problems with CM11?
Thanks :victory:
I also suffer from issue #1 and issue #2 immedietely after a phone call ends. The normal tap sound becomes a buzz sound but goes away in less than 30 seconds.
First of, I have to mention that I had no problems with a stock samsung rom or any touchwiz based rom. The problem is with the CM/AOSP based roms.
When I get a call, the screen goes black. I am unable to even see who is calling me. It works fine with a earphone in place
But what I discovered with SlimLP is that I am able to see my screen when I receive the call, thus allowing me to pick up the call but once the call has been picked up, the screen goes black and I am unable to use in-call options or even end the call.
It would be really helpful if someone can find a fix to this as I have tried several ways to fix the proximity sensor issue. I am not sure where the problem lies in as I have tried installing every custom rom there is and the result has always been the same except for SlimLP.
Thank you!
Im using TA-1024
Does this phone support proximity sensor? In antutu is says "Not supported", but it's a bit odd since that sensor support even 5+ year old phones.
Since july upsate rotation sensor is not working at all, before that update there was still a bug with rotation, but i was able to fix it with a restart, now even that is not helping. Is therw any way i can fix that?
There is also a problem with sound on loudspeaker, when playing somwthing on low volume i hear some buzzing and cracking. Anyone elae have that problem?
TechVenom said:
Im using TA-1024
Does this phone support proximity sensor? In antutu is says "Not supported", but it's a bit odd since that sensor support even 5+ year old phones.
Since july upsate rotation sensor is not working at all, before that update there was still a bug with rotation, but i was able to fix it with a restart, now even that is not helping. Is therw any way i can fix that?
There is also a problem with sound on loudspeaker, when playing somwthing on low volume i hear some buzzing and cracking. Anyone elae have that problem?
Click to expand...
Click to collapse
I own a Nokia 5 and I can confidently say that it does have a proximity sensor. However, I can't help you with your problem since I don't exactly understand what it is and never had a similar problem myself, so, sorry :/
Same
The phone does have a proximity sensor, I also have a problem with the sound buzzing at low volume.
I'm having an annoying BUG on my Mi A2 in relation to the proximity sensor.
Most of the time I'll listen to audio on WhatsApp, it turns on the audio for 1 second and then pauses.
I discovered a small solution, but it's a bit annoying to have to do it straight. Simply lock the screen and unlock again, so the audios return to normal operation.
The problem is that most of the time this happens after the device is locked.
Do you think Xiaomi will solve this problem soon?
I think this is not a problem with the sensor, because if it was, the test applications would not work properly, besides the calls where the sensor does not present any problem, only if you listen to audios in WhatsApp.
I had an A2 lite and also had a annoying problem, when I wanted to reduce or increase the volume, I had to run the audio, push the volume button and then put the phone on the face, this way I could control the volume normally.
Xiaomi, will you pack this BUG of the proximity sensor ???
Sorry for Bad English
I had this issue before but after converting to mi6x its fully working so its software
I think xiaomi doesnt have enough experience to release a bug free Android one rom
emprazol said:
I had this issue before but after converting to mi6x its fully working so its software
I think xiaomi doesnt have enough experience to release a bug free Android one rom
Click to expand...
Click to collapse
Interesting. I'm hoping to tidy up on Android Pie.
jpaulo_36 said:
I'm having an annoying BUG on my Mi A2 in relation to the proximity sensor.
Most of the time I'll listen to audio on WhatsApp, it turns on the audio for 1 second and then pauses.
I discovered a small solution, but it's a bit annoying to have to do it straight. Simply lock the screen and unlock again, so the audios return to normal operation.
The problem is that most of the time this happens after the device is locked.
Do you think Xiaomi will solve this problem soon?
I think this is not a problem with the sensor, because if it was, the test applications would not work properly, besides the calls where the sensor does not present any problem, only if you listen to audios in WhatsApp.
I had an A2 lite and also had a annoying problem, when I wanted to reduce or increase the volume, I had to run the audio, push the volume button and then put the phone on the face, this way I could control the volume normally.
Xiaomi, will you pack this BUG of the proximity sensor ???
Sorry for Bad English
Click to expand...
Click to collapse
You can work around that (Turn off the Adaptive Brightness) in the display options and it will sort it, Hopefully, it will be fixed at some point.